mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
226 lines
9.1 KiB
ReStructuredText
226 lines
9.1 KiB
ReStructuredText
==================
|
|
ESP32-C3-DevKitM-1
|
|
==================
|
|
|
|
:link_to_translation:`zh_CN:[中文]`
|
|
|
|
This user guide will help you get started with ESP32-C3-DevKitM-1 and will also provide more in-depth information.
|
|
|
|
ESP32-C3-DevKitM-1 is an entry-level development board based on `ESP32-C3-MINI-1 <https://www.espressif.com/sites/default/files/documentation/esp32-c3-mini-1_datasheet_en.pdf>`_, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth LE functions.
|
|
|
|
Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitM-1 on a breadboard.
|
|
|
|
.. figure:: ../../../_static/esp32-c3-devkitm-1-v1-isometric.png
|
|
:align: center
|
|
:alt: ESP32-C3-DevKitM-1
|
|
:figclass: align-center
|
|
|
|
ESP32-C3-DevKitM-1
|
|
|
|
The document consists of the following major sections:
|
|
|
|
- `Getting Started`_: Overview of ESP32-C3-DevKitM-1 and hardware/software setup instructions to get started.
|
|
- `Hardware Reference`_: More detailed information about the ESP32-C3-DevKitM-1's hardware.
|
|
- `Hardware Revision Details`_: Revision history, known issues, and links to user guides for previous versions (if any) of ESP32-C3-DevKitM-1.
|
|
- `Related Documents`_: Links to related documentation.
|
|
|
|
Getting Started
|
|
===============
|
|
|
|
This section provides a brief introduction of ESP32-C3-DevKitM-1, instructions on how to do the initial hardware setup and how to flash firmware onto it.
|
|
|
|
|
|
Description of Components
|
|
-------------------------
|
|
|
|
.. _user-guide-c3-devkitm-1-v1-board-front:
|
|
|
|
.. figure:: ../../../_static/esp32-c3-devkitm-1-v1-annotated-photo.png
|
|
:align: center
|
|
:alt: ESP32-C3-DevKitM-1 - front
|
|
:figclass: align-center
|
|
|
|
ESP32-C3-DevKitM-1 - front
|
|
|
|
The key components of the board are described in a counter-clockwise direction.
|
|
|
|
.. list-table::
|
|
:widths: 30 70
|
|
:header-rows: 1
|
|
|
|
* - Key Component
|
|
- Description
|
|
* - ESP32-C3-MINI-1
|
|
- ESP32-C3-MINI-1 is a general-purpose Wi-Fi and Bluetooth LE combo module that comes with a PCB antenna. At the core of this module is `ESP32-C3FN4 <https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf>`_, a chip that has an embedded flash of 4 MB. Since flash is packaged in the ESP32-C3FN4 chip, rather than integrated into the module, ESP32-C3-MINI-1 has a smaller package size.
|
|
* - 5 V to 3.3 V LDO
|
|
- Power regulator that converts a 5 V supply into a 3.3 V output.
|
|
* - 5 V Power On LED
|
|
- Turns on when the USB power is connected to the board.
|
|
* - Pin Headers
|
|
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board. For details, please see :ref:`user-guide-c3-devkitm-1-v1-header-blocks`.
|
|
* - Boot Button
|
|
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
|
* - Micro-USB Port
|
|
- USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32-C3FN4 chip.
|
|
* - Reset Button
|
|
- Press this button to restart the system.
|
|
* - USB-to-UART Bridge
|
|
- Single USB-UART bridge chip provides transfer rates up to 3 Mbps.
|
|
* - RGB LED
|
|
- Addressable RGB LED, driven by GPIO8.
|
|
|
|
|
|
Start Application Development
|
|
-----------------------------
|
|
|
|
Before powering up your ESP32-C3-DevKitM-1, please make sure that it is in good condition with no obvious signs of damage.
|
|
|
|
Required Hardware
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
- ESP32-C3-DevKitM-1
|
|
- USB 2.0 cable (Standard-A to Micro-B)
|
|
- Computer running Windows, Linux, or macOS
|
|
|
|
.. note::
|
|
|
|
Be sure to use an appropriate USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
|
|
|
|
Software Setup
|
|
^^^^^^^^^^^^^^
|
|
|
|
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your ESP32-C3-DevKitM-1.
|
|
|
|
Contents and Packaging
|
|
----------------------
|
|
|
|
Retail Orders
|
|
^^^^^^^^^^^^^
|
|
|
|
If you order one or several samples, each ESP32-C3-DevKitM-1 comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
|
|
|
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
|
|
|
|
|
Wholesale Orders
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
If you order in bulk, the boards come in large cardboard boxes.
|
|
|
|
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
|
|
|
Hardware Reference
|
|
==================
|
|
|
|
Block Diagram
|
|
-------------
|
|
|
|
The block diagram below shows the components of ESP32-C3-DevKitM-1 and their interconnections.
|
|
|
|
.. figure:: ../../../_static/esp32-c3-devkitm-1-v1-block-diagram.png
|
|
:align: center
|
|
:scale: 70%
|
|
:alt: ESP32-C3-DevKitM-1 (click to enlarge)
|
|
:figclass: align-center
|
|
|
|
ESP32-C3-DevKitM-1 (click to enlarge)
|
|
|
|
Power Supply Options
|
|
^^^^^^^^^^^^^^^^^^^^
|
|
|
|
There are three mutually exclusive ways to provide power to the board:
|
|
|
|
- Micro-USB Port, default power supply
|
|
- 5V and GND pin headers
|
|
- 3V3 and GND pin headers
|
|
|
|
It is recommended to use the first option: Micro-USB Port.
|
|
|
|
.. _user-guide-c3-devkitm-1-v1-header-blocks:
|
|
|
|
Header Block
|
|
------------
|
|
|
|
The two tables below provide the **Name** and **Function** of the pin headers on both sides of the board (J1 and J3). The pin header names are shown in :ref:`user-guide-c3-devkitm-1-v1-board-front`. The numbering is the same as in the `ESP32-C3-DevKitM-1 Schematic`_ (PDF).
|
|
|
|
J1
|
|
^^^
|
|
=== ==== ========== ===================================
|
|
No. Name Type [1]_ Function
|
|
=== ==== ========== ===================================
|
|
1 GND G Ground
|
|
2 3V3 P 3.3 V power supply
|
|
3 3V3 P 3.3 V power supply
|
|
4 IO2 I/O/T GPIO2 [2]_, ADC1_CH2, FSPIQ
|
|
5 IO3 I/O/T GPIO3, ADC1_CH3
|
|
6 GND G Ground
|
|
7 RST I CHIP_PU
|
|
8 GND G Ground
|
|
9 IO0 I/O/T GPIO0, ADC1_CH0, XTAL_32K_P
|
|
10 IO1 I/O/T GPIO1, ADC1_CH1, XTAL_32K_N
|
|
11 IO10 I/O/T GPIO10, FSPICS0
|
|
12 GND G Ground
|
|
13 5V P 5 V power supply
|
|
14 5V P 5 V power supply
|
|
15 GND G Ground
|
|
=== ==== ========== ===================================
|
|
|
|
J3
|
|
^^^
|
|
=== ==== ========== ====================================
|
|
No. Name Type [1]_ Function
|
|
=== ==== ========== ====================================
|
|
1 GND G Ground
|
|
2 TX I/O/T GPIO21, U0TXD
|
|
3 RX I/O/T GPIO20, U0RXD
|
|
4 GND G Ground
|
|
5 IO9 I/O/T GPIO9 [2]_
|
|
6 IO8 I/O/T GPIO8 [2]_, RGB LED
|
|
7 GND G Ground
|
|
8 IO7 I/O/T GPIO7, FSPID, MTDO
|
|
9 IO6 I/O/T GPIO6, FSPICLK, MTCK
|
|
10 IO5 I/O/T GPIO5, ADC2_CH0, FSPIWP, MTDI
|
|
11 IO4 I/O/T GPIO4, ADC1_CH4, FSPIHD, MTMS
|
|
12 GND G Ground
|
|
13 IO18 I/O/T GPIO18, USB_D-
|
|
14 IO19 I/O/T GPIO19, USB_D+
|
|
15 GND G Ground
|
|
=== ==== ========== ====================================
|
|
|
|
.. [1] P: Power supply; I: Input; O: Output; T: High impedance.
|
|
.. [2] GPIO2, GPIO8, and GPIO9 are strapping pins of the ESP32-C3FN4 chip. These pins are used to control several chip functions depending on binary voltage values applied to the pins during chip power-up or system reset. For description and application of the strapping pins, please refer to Section Strapping Pins in `ESP32-C3 Datasheet`_.
|
|
|
|
Pin Layout
|
|
^^^^^^^^^^^
|
|
.. figure:: ../../../_static/esp32-c3-devkitm-1-v1-pinout.jpg
|
|
:align: center
|
|
:scale: 45%
|
|
:alt: ESP32-C3-DevKitM-1 (click to enlarge)
|
|
:figclass: align-center
|
|
|
|
ESP32-C3-DevKitM-1 Pin Layout (click to enlarge)
|
|
|
|
Hardware Revision Details
|
|
=========================
|
|
|
|
No previous versions available.
|
|
|
|
Related Documents
|
|
=================
|
|
* `Build Secure and Cost-effective Connected Devices with ESP32-C3 <http://c3.espressif.com/>`_
|
|
* `ESP32-C3 Datasheet`_ (PDF)
|
|
* `ESP32-C3-MINI-1 Datasheet`_ (PDF)
|
|
* `ESP32-C3-DevKitM-1 Schematic`_ (PDF)
|
|
* `ESP32-C3-DevKitM-1 PCB Layout`_ (PDF)
|
|
* `ESP32-C3-DevKitM-1 Dimensions`_ (PDF)
|
|
* `ESP32-C3-DevKitM-1 Dimensions source file`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
|
|
|
|
For further design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
|
|
|
|
.. _ESP32-C3 Datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf
|
|
.. _ESP32-C3-MINI-1 Datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-c3-mini-1_datasheet_en.pdf
|
|
.. _ESP32-C3-DevKitM-1 Schematic: https://dl.espressif.com/dl/schematics/SCH_ESP32-C3-DEVKITM-1_V1_20200915A.pdf
|
|
.. _ESP32-C3-DevKitM-1 PCB Layout: https://dl.espressif.com/dl/schematics/PCB_ESP32-C3-DEVKITM-1_V1_20200915AA.pdf
|
|
.. _ESP32-C3-DevKitM-1 Dimensions: https://dl.espressif.com/dl/schematics/DIMENSION_ESP32-C3-DEVKITM-1_V1_20200915AA.pdf
|
|
.. _ESP32-C3-DevKitM-1 Dimensions source file: https://dl.espressif.com/dl/schematics/DIMENSION_ESP32-C3-DEVKITM-1_V1_20200915AA.dxf
|