c5d8acc40a
- Shows use of roaming app through dedicated example : roaming_app_example. - Changes the location of the earlier roaming example by moving it into the roaming_11kvr. - Please note that this feature is still experimental and still being optimised and tuned. |
||
|---|---|---|
| .. | ||
| main | ||
| CMakeLists.txt | ||
| README.md | ||
| sdkconfig.defaults | ||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|---|
Wi-Fi Station Example
(See the README.md file in the upper level 'examples' directory for more information about examples.)
This example shows how to use the Wi-Fi Roaming App functionality of the Wi-Fi driver of ESP for efficient roaming between compatible APs.
How to use example
Configure the project
Open the project configuration menu (idf.py menuconfig).
In the Example Configuration menu:
-
Set the Wi-Fi configuration.
- Set
WiFi SSID. - Set
WiFi Password.
- Set
-
To better understand how to configure the app in Components --> Wi-Fi --> Roaming App settings, please go read the README at components/esp_wifi/wifi_apps/roaming_app/src. Optional: If you need, change the other options according to your requirements.
Build and Flash
Build the project and flash it to the board, then run the monitor tool to view the serial output:
Run idf.py -p PORT flash monitor to build, flash and monitor the project.
(To exit the serial monitor, type Ctrl-].)
See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.
- ESP-IDF Getting Started Guide on ESP32
- ESP-IDF Getting Started Guide on ESP32-S2
- ESP-IDF Getting Started Guide on ESP32-C3
Example Output
Note that the output, in particular the order of the output, may vary depending on the environment.
Console output if station roams between APs successfully:
I (827) wifi roaming app: wifi_init_sta finished.
I (837) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:5
I (837) wifi:state: init -> auth (b0)
I (847) wifi:state: auth -> assoc (0)
I (857) wifi:Association refused temporarily, comeback time 1000 (TUs)
I (1877) wifi:state: assoc -> assoc (0)
I (1917) wifi:state: assoc -> run (10)
I (2997) wifi:connected with roaming_setup, aid = 1, channel 1, BW20, bssid = de:bd:5b:93:55:99
I (2997) wifi:security: WPA2-PSK, phy: bgn, rssi: -58
I (3007) wifi:pm start, type: 1
I (3087) wifi:AP's beacon interval = 102400 us, DTIM period = 2
I (10467) ROAM: roaming_app_rssi_low_handler:bss rssi is=-61
I (10467) ROAM: Issued Scan
I (10857) ROAM: Could not find a better AP with the threshold set to 1
I (63017) ROAM: Issued Scan
I (63347) ROAM: Found a better AP 7c:50:79:06:18:46 at channel 9
I (63347) wifi:state: run -> init (cc0)
I (63347) wifi:pm stop, total sleep time: 54401305 us / 60339946 us
I (63347) wifi:new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:5
E (63357) ROAM: Neighbor report is empty
I (63357) wifi roaming app: station disconnected during roaming
I (63377) wifi roaming app: connect to the AP fail
I (63377) ROAM: Disconnecting and connecting to 7c:50:79:06:18:46 on account of better rssi
I (63497) wifi:new:<9,0>, old:<1,0>, ap:<255,255>, sta:<9,0>, prof:5
I (63837) wifi:state: init -> auth (b0)
I (63847) wifi:state: auth -> assoc (0)
I (63887) wifi:Association refused temporarily, comeback time 1000 (TUs)
I (64907) wifi:state: assoc -> assoc (0)
I (64977) wifi:state: assoc -> run (10)
I (65007) wifi:connected with roaming_setup, aid = 1, channel 9, BW20, bssid = 7c:50:79:06:18:46
I (65007) wifi:security: WPA2-PSK, phy: bgn, rssi: -32
I (65027) wifi:pm start, type: 1
Troubleshooting
For any technical queries, please open an issue on GitHub. We will get back to you soon.