esp-idf/examples/peripherals/i2c/i2c_tools/main/i2ctools_example_main.c

82 lines
3.0 KiB
C

/* i2c-tools example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <string.h>
#include "sdkconfig.h"
#include "esp_log.h"
#include "esp_console.h"
#include "esp_vfs_fat.h"
#include "cmd_system.h"
#include "cmd_i2ctools.h"
static const char *TAG = "i2c-tools";
#if CONFIG_EXAMPLE_STORE_HISTORY
#define MOUNT_PATH "/data"
#define HISTORY_PATH MOUNT_PATH "/history.txt"
static void initialize_filesystem(void)
{
static wl_handle_t wl_handle;
const esp_vfs_fat_mount_config_t mount_config = {
.max_files = 4,
.format_if_mount_failed = true
};
esp_err_t err = esp_vfs_fat_spiflash_mount(MOUNT_PATH, "storage", &mount_config, &wl_handle);
if (err != ESP_OK) {
ESP_LOGE(TAG, "Failed to mount FATFS (%s)", esp_err_to_name(err));
return;
}
}
#endif // CONFIG_EXAMPLE_STORE_HISTORY
void app_main(void)
{
esp_console_repl_t *repl = NULL;
esp_console_repl_config_t repl_config = ESP_CONSOLE_REPL_CONFIG_DEFAULT();
#if CONFIG_EXAMPLE_STORE_HISTORY
initialize_filesystem();
repl_config.history_save_path = HISTORY_PATH;
#endif
repl_config.prompt = "i2c-tools>";
// install console REPL environment
#if CONFIG_ESP_CONSOLE_UART
esp_console_dev_uart_config_t uart_config = ESP_CONSOLE_DEV_UART_CONFIG_DEFAULT();
ESP_ERROR_CHECK(esp_console_new_repl_uart(&uart_config, &repl_config, &repl));
#elif CONFIG_ESP_CONSOLE_USB_CDC
esp_console_dev_usb_cdc_config_t cdc_config = ESP_CONSOLE_DEV_CDC_CONFIG_DEFAULT();
ESP_ERROR_CHECK(esp_console_new_repl_usb_cdc(&cdc_config, &repl_config, &repl));
#elif CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
esp_console_dev_usb_serial_jtag_config_t usbjtag_config = ESP_CONSOLE_DEV_USB_SERIAL_JTAG_CONFIG_DEFAULT();
ESP_ERROR_CHECK(esp_console_new_repl_usb_serial_jtag(&usbjtag_config, &repl_config, &repl));
#endif
register_i2ctools();
register_system();
printf("\n ==============================================================\n");
printf(" | Steps to Use i2c-tools |\n");
printf(" | |\n");
printf(" | 1. Try 'help', check all supported commands |\n");
printf(" | 2. Try 'i2cconfig' to configure your I2C bus |\n");
printf(" | 3. Try 'i2cdetect' to scan devices on the bus |\n");
printf(" | 4. Try 'i2cget' to get the content of specific register |\n");
printf(" | 5. Try 'i2cset' to set the value of specific register |\n");
printf(" | 6. Try 'i2cdump' to dump all the register (Experiment) |\n");
printf(" | |\n");
printf(" ==============================================================\n\n");
// start console REPL
ESP_ERROR_CHECK(esp_console_start_repl(repl));
}