alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
74f010ddfd
esp-idf/components/spi_flash/spi_flash_chip_generic.c

677 lines
24 KiB
C
Raw Blame History

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include <string.h>
#include <sys/param.h> // For MIN/MAX
#include "spi_flash_chip_generic.h"
#include "spi_flash_defs.h"
#include "esp_log.h"
#include "esp_attr.h"
typedef struct flash_chip_dummy {
uint8_t dio_dummy_bitlen;
uint8_t qio_dummy_bitlen;
uint8_t qout_dummy_bitlen;
uint8_t dout_dummy_bitlen;
uint8_t fastrd_dummy_bitlen;
uint8_t slowrd_dummy_bitlen;
} flash_chip_dummy_t;
// These parameters can be placed in the ROM. For now we use the code in IDF.
DRAM_ATTR const static flash_chip_dummy_t default_flash_chip_dummy = {
.dio_dummy_bitlen = SPI_FLASH_DIO_DUMMY_BITLEN,
.qio_dummy_bitlen = SPI_FLASH_QIO_DUMMY_BITLEN,
.qout_dummy_bitlen = SPI_FLASH_QOUT_DUMMY_BITLEN,
.dout_dummy_bitlen = SPI_FLASH_DOUT_DUMMY_BITLEN,
.fastrd_dummy_bitlen = SPI_FLASH_FASTRD_DUMMY_BITLEN,
.slowrd_dummy_bitlen = SPI_FLASH_SLOWRD_DUMMY_BITLEN,
};
DRAM_ATTR flash_chip_dummy_t *rom_flash_chip_dummy = (flash_chip_dummy_t *)&default_flash_chip_dummy;
#define SPI_FLASH_DEFAULT_IDLE_TIMEOUT_MS 200
#define SPI_FLASH_GENERIC_CHIP_ERASE_TIMEOUT_MS 4000
#define SPI_FLASH_GENERIC_SECTOR_ERASE_TIMEOUT_MS 600 //according to GD25Q127(125°) + 100ms
#define SPI_FLASH_GENERIC_BLOCK_ERASE_TIMEOUT_MS 4100 //according to GD25Q127(125°) + 100ms
#define SPI_FLASH_GENERIC_PAGE_PROGRAM_TIMEOUT_MS 500
#define HOST_DELAY_INTERVAL_US 1
#define CHIP_WAIT_IDLE_INTERVAL_US 20
const DRAM_ATTR flash_chip_op_timeout_t spi_flash_chip_generic_timeout = {
.idle_timeout = SPI_FLASH_DEFAULT_IDLE_TIMEOUT_MS * 1000,
.chip_erase_timeout = SPI_FLASH_GENERIC_CHIP_ERASE_TIMEOUT_MS * 1000,
.block_erase_timeout = SPI_FLASH_GENERIC_BLOCK_ERASE_TIMEOUT_MS * 1000,
.sector_erase_timeout = SPI_FLASH_GENERIC_SECTOR_ERASE_TIMEOUT_MS * 1000,
.page_program_timeout = SPI_FLASH_GENERIC_PAGE_PROGRAM_TIMEOUT_MS * 1000,
};
static const char TAG[] = "chip_generic";
#ifndef CONFIG_SPI_FLASH_ROM_IMPL
esp_err_t spi_flash_chip_generic_probe(esp_flash_t *chip, uint32_t flash_id)
{
// This is the catch-all probe function, claim the chip always if nothing
// else has claimed it yet.
return ESP_OK;
}
esp_err_t spi_flash_chip_generic_reset(esp_flash_t *chip)
{
//this is written following the winbond spec..
spi_flash_trans_t t;
t = (spi_flash_trans_t) {
.command = CMD_RST_EN,
};
esp_err_t err = chip->host->driver->common_command(chip->host, &t);
if (err != ESP_OK) {
return err;
}
t = (spi_flash_trans_t) {
.command = CMD_RST_DEV,
};
err = chip->host->driver->common_command(chip->host, &t);
if (err != ESP_OK) {
return err;
}
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
return err;
}
esp_err_t spi_flash_chip_generic_detect_size(esp_flash_t *chip, uint32_t *size)
{
uint32_t id = chip->chip_id;
*size = 0;
/* Can't detect size unless the high byte of the product ID matches the same convention, which is usually 0x40 or
* 0xC0 or similar. */
if (((id & 0xFFFF) == 0x0000) || ((id & 0xFFFF) == 0xFFFF)) {
return ESP_ERR_FLASH_UNSUPPORTED_CHIP;
}
*size = 1 << (id & 0xFF);
return ESP_OK;
}
esp_err_t spi_flash_chip_generic_erase_chip(esp_flash_t *chip)
{
esp_err_t err;
err = chip->chip_drv->set_chip_write_protect(chip, false);
if (err == ESP_OK) {
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
}
//The chip didn't accept the previous write command. Ignore this in preparation stage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
chip->host->driver->erase_chip(chip->host);
chip->busy = 1;
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
err = chip->chip_drv->wait_idle(chip, ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
#else
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->chip_erase_timeout);
#endif
}
// Ensure WEL is 0, even if the erase failed.
if (err == ESP_ERR_NOT_SUPPORTED) {
err = chip->chip_drv->set_chip_write_protect(chip, true);
}
return err;
}
esp_err_t spi_flash_chip_generic_erase_sector(esp_flash_t *chip, uint32_t start_address)
{
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
if (err == ESP_OK) {
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
}
//The chip didn't accept the previous write command. Ignore this in preparationstage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
chip->host->driver->erase_sector(chip->host, start_address);
chip->busy = 1;
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
err = chip->chip_drv->wait_idle(chip, ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
#else
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->sector_erase_timeout);
#endif
}
// Ensure WEL is 0, even if the erase failed.
if (err == ESP_ERR_NOT_SUPPORTED) {
err = chip->chip_drv->set_chip_write_protect(chip, true);
}
return err;
}
esp_err_t spi_flash_chip_generic_erase_block(esp_flash_t *chip, uint32_t start_address)
{
esp_err_t err = chip->chip_drv->set_chip_write_protect(chip, false);
if (err == ESP_OK) {
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
}
//The chip didn't accept the previous write command. Ignore this in preparationstage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
chip->host->driver->erase_block(chip->host, start_address);
chip->busy = 1;
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
err = chip->chip_drv->wait_idle(chip, ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
#else
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->block_erase_timeout);
#endif
}
// Ensure WEL is 0, even if the erase failed.
if (err == ESP_ERR_NOT_SUPPORTED) {
err = chip->chip_drv->set_chip_write_protect(chip, true);
}
return err;
}
esp_err_t spi_flash_chip_generic_read(esp_flash_t *chip, void *buffer, uint32_t address, uint32_t length)
{
esp_err_t err = ESP_OK;
const uint32_t page_size = chip->chip_drv->page_size;
uint32_t align_address;
uint8_t temp_buffer[64]; //spiflash hal max length of read no longer than 64byte
// Configure the host, and return
err = spi_flash_chip_generic_config_host_io_mode(chip, false);
if (err == ESP_ERR_NOT_SUPPORTED) {
ESP_LOGE(TAG, "configure host io mode failed - unsupported");
return err;
}
while (err == ESP_OK && length > 0) {
memset(temp_buffer, 0xFF, sizeof(temp_buffer));
uint32_t read_len = chip->host->driver->read_data_slicer(chip->host, address, length, &align_address, page_size);
uint32_t left_off = address - align_address;
uint32_t data_len = MIN(align_address + read_len, address + length) - address;
err = chip->host->driver->read(chip->host, temp_buffer, align_address, read_len);
memcpy(buffer, temp_buffer + left_off, data_len);
address += data_len;
buffer = (void *)((intptr_t)buffer + data_len);
length = length - data_len;
}
return err;
}
esp_err_t spi_flash_chip_generic_page_program(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
{
esp_err_t err;
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
//The chip didn't accept the previous write command. Ignore this in preparationstage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
// Perform the actual Page Program command
chip->host->driver->program_page(chip->host, buffer, address, length);
chip->busy = 1;
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->page_program_timeout);
}
// Ensure WEL is 0, even if the page program failed.
if (err == ESP_ERR_NOT_SUPPORTED) {
err = chip->chip_drv->set_chip_write_protect(chip, true);
}
return err;
}
esp_err_t spi_flash_chip_generic_write(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
{
esp_err_t err = ESP_OK;
const uint32_t page_size = chip->chip_drv->page_size;
uint32_t align_address;
uint8_t temp_buffer[64]; //spiflash hal max length of write no longer than 64byte
while (err == ESP_OK && length > 0) {
memset(temp_buffer, 0xFF, sizeof(temp_buffer));
uint32_t page_len = chip->host->driver->write_data_slicer(chip->host, address, length, &align_address, page_size);
uint32_t left_off = address - align_address;
uint32_t write_len = MIN(align_address + page_len, address + length) - address;
memcpy(temp_buffer + left_off, buffer, write_len);
err = chip->chip_drv->set_chip_write_protect(chip, false);
if (err == ESP_OK && length > 0) {
err = chip->chip_drv->program_page(chip, temp_buffer, align_address, page_len);
address += write_len;
buffer = (void *)((intptr_t)buffer + write_len);
length -= write_len;
}
}
// The caller is responsible to do host->driver->flush_cache, because this function may be
// called in small pieces. Frequency call of flush cache will do harm to the performance.
return err;
}
esp_err_t spi_flash_chip_generic_write_encrypted(esp_flash_t *chip, const void *buffer, uint32_t address, uint32_t length)
{
return ESP_ERR_FLASH_UNSUPPORTED_HOST; // TODO
}
esp_err_t spi_flash_chip_generic_set_write_protect(esp_flash_t *chip, bool write_protect)
{
esp_err_t err = ESP_OK;
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
//The chip didn't accept the previous write command. Ignore this in preparationstage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
chip->host->driver->set_write_protect(chip->host, write_protect);
}
bool wp_read;
err = chip->chip_drv->get_chip_write_protect(chip, &wp_read);
if (err == ESP_OK && wp_read != write_protect) {
// WREN flag has not been set!
err = ESP_ERR_NOT_FOUND;
}
return err;
}
esp_err_t spi_flash_chip_generic_get_write_protect(esp_flash_t *chip, bool *out_write_protect)
{
esp_err_t err = ESP_OK;
uint32_t status;
assert(out_write_protect!=NULL);
err = chip->chip_drv->read_reg(chip, SPI_FLASH_REG_STATUS, &status);
if (err != ESP_OK) {
return err;
}
*out_write_protect = ((status & SR_WREN) == 0);
return err;
}
esp_err_t spi_flash_chip_generic_read_reg(esp_flash_t* chip, spi_flash_register_t reg_id, uint32_t* out_reg)
{
return chip->host->driver->read_status(chip->host, (uint8_t*)out_reg);
}
esp_err_t spi_flash_chip_generic_yield(esp_flash_t* chip, uint32_t wip)
{
esp_err_t err = ESP_OK;
uint32_t flags = wip? 1: 0; //check_yield() and yield() impls should not issue suspend/resume if this flag is zero
if (chip->os_func->check_yield) {
uint32_t request;
//According to the implementation, the check_yield() function may block, poll, delay or do nothing but return
err = chip->os_func->check_yield(chip->os_func_data, flags, &request);
if (err == ESP_OK) {
if (err == ESP_OK && (request & SPI_FLASH_YIELD_REQ_YIELD) != 0) {
uint32_t status;
//According to the implementation, the yield() function may block until something happen
err = chip->os_func->yield(chip->os_func_data, &status);
}
} else if (err == ESP_ERR_TIMEOUT) {
err = ESP_OK;
} else {
abort();
}
}
return err;
}
esp_err_t spi_flash_chip_generic_wait_idle(esp_flash_t *chip, uint32_t timeout_us)
{
bool timeout_en = (timeout_us != ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT);
if (timeout_us == ESP_FLASH_CHIP_GENERIC_NO_TIMEOUT) {
timeout_us = 0;// In order to go into while
}
timeout_us++; // allow at least one pass before timeout, last one has no sleep cycle
uint8_t status = 0;
const int interval = CHIP_WAIT_IDLE_INTERVAL_US;
while (timeout_us > 0) {
while (!chip->host->driver->host_status(chip->host) && timeout_us > 0) {
#if HOST_DELAY_INTERVAL_US > 0
if (timeout_us > 1) {
int delay = MIN(HOST_DELAY_INTERVAL_US, timeout_us);
chip->os_func->delay_us(chip->os_func_data, delay);
timeout_us -= delay;
}
#endif
}
uint32_t read;
esp_err_t err = chip->chip_drv->read_reg(chip, SPI_FLASH_REG_STATUS, &read);
if (err != ESP_OK) {
return err;
}
status = read;
if ((status & SR_WIP) == 0) { // Verify write in progress is complete
if (chip->busy == 1) {
chip->busy = 0;
if ((status & SR_WREN) != 0) { // The previous command is not accepted, leaving the WEL still set.
return ESP_ERR_NOT_SUPPORTED;
}
}
break;
}
if (timeout_us > 0 && interval > 0) {
int delay = MIN(interval, timeout_us);
chip->os_func->delay_us(chip->os_func_data, delay);
if (timeout_en) {
timeout_us -= delay;
}
}
}
return (timeout_us > 0) ? ESP_OK : ESP_ERR_TIMEOUT;
}
esp_err_t spi_flash_chip_generic_config_host_io_mode(esp_flash_t *chip, bool addr_32bit)
{
uint32_t dummy_cyclelen_base;
uint32_t addr_bitlen;
uint32_t read_command;
bool conf_required = false;
esp_flash_io_mode_t read_mode = chip->read_mode;
switch (read_mode & 0xFFFF) {
case SPI_FLASH_QIO:
//for QIO mode, the 4 bit right after the address are used for continuous mode, should be set to 0 to avoid that.
addr_bitlen = SPI_FLASH_QIO_ADDR_BITLEN;
dummy_cyclelen_base = rom_flash_chip_dummy->qio_dummy_bitlen;
read_command = (addr_32bit? CMD_FASTRD_QIO_4B: CMD_FASTRD_QIO);
conf_required = true;
break;
case SPI_FLASH_QOUT:
addr_bitlen = SPI_FLASH_QOUT_ADDR_BITLEN;
dummy_cyclelen_base = rom_flash_chip_dummy->qout_dummy_bitlen;
read_command = (addr_32bit? CMD_FASTRD_QUAD_4B: CMD_FASTRD_QUAD);
break;
case SPI_FLASH_DIO:
//for DIO mode, the 4 bit right after the address are used for continuous mode, should be set to 0 to avoid that.
addr_bitlen = SPI_FLASH_DIO_ADDR_BITLEN;
dummy_cyclelen_base = rom_flash_chip_dummy->dio_dummy_bitlen;
read_command = (addr_32bit? CMD_FASTRD_DIO_4B: CMD_FASTRD_DIO);
conf_required = true;
break;
case SPI_FLASH_DOUT:
addr_bitlen = SPI_FLASH_DOUT_ADDR_BITLEN;
dummy_cyclelen_base = rom_flash_chip_dummy->dout_dummy_bitlen;
read_command = (addr_32bit? CMD_FASTRD_DUAL_4B: CMD_FASTRD_DUAL);
break;
case SPI_FLASH_FASTRD:
addr_bitlen = SPI_FLASH_FASTRD_ADDR_BITLEN;
dummy_cyclelen_base = rom_flash_chip_dummy->fastrd_dummy_bitlen;
read_command = (addr_32bit? CMD_FASTRD_4B: CMD_FASTRD);
break;
case SPI_FLASH_SLOWRD:
addr_bitlen = SPI_FLASH_SLOWRD_ADDR_BITLEN;
dummy_cyclelen_base = rom_flash_chip_dummy->slowrd_dummy_bitlen;
read_command = (addr_32bit? CMD_READ_4B: CMD_READ);
break;
default:
return ESP_ERR_FLASH_NOT_INITIALISED;
}
//For W25Q256 chip, the only difference between 4-Byte address command and 3-Byte version is the command value and the address bit length.
if (addr_32bit) {
addr_bitlen += 8;
}
if (conf_required) {
read_mode |= SPI_FLASH_CONFIG_CONF_BITS;
}
return chip->host->driver->configure_host_io_mode(chip->host, read_command, addr_bitlen, dummy_cyclelen_base, read_mode);
}
esp_err_t spi_flash_chip_generic_get_io_mode(esp_flash_t *chip, esp_flash_io_mode_t* out_io_mode)
{
// On "generic" chips, this involves checking
// bit 1 (QE) of RDSR2 (35h) result
// (it works this way on GigaDevice & Fudan Micro chips, probably others...)
const uint8_t BIT_QE = 1 << 1;
uint32_t sr;
esp_err_t ret = spi_flash_common_read_status_8b_rdsr2(chip, &sr);
if (ret == ESP_OK) {
*out_io_mode = ((sr & BIT_QE)? SPI_FLASH_QOUT: 0);
}
return ret;
}
esp_err_t spi_flash_chip_generic_set_io_mode(esp_flash_t *chip)
{
// On "generic" chips, this involves checking
// bit 9 (QE) of RDSR (05h) result
const uint32_t BIT_QE = 1 << 9;
return spi_flash_common_set_io_mode(chip,
spi_flash_common_write_status_16b_wrsr,
spi_flash_common_read_status_16b_rdsr_rdsr2,
BIT_QE);
}
#endif // CONFIG_SPI_FLASH_ROM_IMPL
spi_flash_caps_t spi_flash_chip_generic_get_caps(esp_flash_t *chip)
{
// For generic part flash capability, take the XMC chip as reference.
spi_flash_caps_t caps_flags = 0;
// 32M-bits address support
// flash suspend support
// Only `XMC` support suspend for now.
if (chip->chip_id >> 16 == 0x20) {
caps_flags |= SPI_FLASH_CHIP_CAP_SUSPEND;
}
return caps_flags;
}
static const char chip_name[] = "generic";
const spi_flash_chip_t esp_flash_chip_generic = {
.name = chip_name,
.timeout = &spi_flash_chip_generic_timeout,
.probe = spi_flash_chip_generic_probe,
.reset = spi_flash_chip_generic_reset,
.detect_size = spi_flash_chip_generic_detect_size,
.erase_chip = spi_flash_chip_generic_erase_chip,
.erase_sector = spi_flash_chip_generic_erase_sector,
.erase_block = spi_flash_chip_generic_erase_block,
.sector_size = 4 * 1024,
.block_erase_size = 64 * 1024,
// TODO: figure out if generic chip-wide protection bits exist across some manufacturers
.get_chip_write_protect = spi_flash_chip_generic_get_write_protect,
.set_chip_write_protect = spi_flash_chip_generic_set_write_protect,
// Chip write protection regions do not appear to be standardised
// at all, this is implemented in chip-specific drivers only.
.num_protectable_regions = 0,
.protectable_regions = NULL,
.get_protected_regions = NULL,
.set_protected_regions = NULL,
.read = spi_flash_chip_generic_read,
.write = spi_flash_chip_generic_write,
.program_page = spi_flash_chip_generic_page_program,
.page_size = 256,
.write_encrypted = spi_flash_chip_generic_write_encrypted,
.wait_idle = spi_flash_chip_generic_wait_idle,
.set_io_mode = spi_flash_chip_generic_set_io_mode,
.get_io_mode = spi_flash_chip_generic_get_io_mode,
.read_reg = spi_flash_chip_generic_read_reg,
.yield = spi_flash_chip_generic_yield,
.sus_setup = spi_flash_chip_generic_suspend_cmd_conf,
.get_chip_caps = spi_flash_chip_generic_get_caps,
};
#ifndef CONFIG_SPI_FLASH_ROM_IMPL
/*******************************************************************************
* Utility functions
******************************************************************************/
static esp_err_t spi_flash_common_read_qe_sr(esp_flash_t *chip, uint8_t qe_rdsr_command, uint8_t qe_sr_bitwidth, uint32_t *sr)
{
uint32_t sr_buf = 0;
spi_flash_trans_t t = {
.command = qe_rdsr_command,
.miso_data = (uint8_t*) &sr_buf,
.miso_len = qe_sr_bitwidth / 8,
};
esp_err_t ret = chip->host->driver->common_command(chip->host, &t);
*sr = sr_buf;
return ret;
}
static esp_err_t spi_flash_common_write_qe_sr(esp_flash_t *chip, uint8_t qe_wrsr_command, uint8_t qe_sr_bitwidth, uint32_t qe)
{
spi_flash_trans_t t = {
.command = qe_wrsr_command,
.mosi_data = ((uint8_t*) &qe),
.mosi_len = qe_sr_bitwidth / 8,
.miso_len = 0,
};
return chip->host->driver->common_command(chip->host, &t);
}
esp_err_t spi_flash_common_read_status_16b_rdsr_rdsr2(esp_flash_t* chip, uint32_t* out_sr)
{
uint32_t sr, sr2;
esp_err_t ret = spi_flash_common_read_qe_sr(chip, CMD_RDSR2, 8, &sr2);
if (ret == ESP_OK) {
ret = spi_flash_common_read_qe_sr(chip, CMD_RDSR, 8, &sr);
}
if (ret == ESP_OK) {
*out_sr = (sr & 0xff) | ((sr2 & 0xff) << 8);
}
return ret;
}
esp_err_t spi_flash_common_read_status_8b_rdsr2(esp_flash_t* chip, uint32_t* out_sr)
{
return spi_flash_common_read_qe_sr(chip, CMD_RDSR2, 8, out_sr);
}
esp_err_t spi_flash_common_read_status_8b_rdsr(esp_flash_t* chip, uint32_t* out_sr)
{
return spi_flash_common_read_qe_sr(chip, CMD_RDSR, 8, out_sr);
}
esp_err_t spi_flash_common_write_status_16b_wrsr(esp_flash_t* chip, uint32_t sr)
{
return spi_flash_common_write_qe_sr(chip, CMD_WRSR, 16, sr);
}
esp_err_t spi_flash_common_write_status_8b_wrsr(esp_flash_t* chip, uint32_t sr)
{
return spi_flash_common_write_qe_sr(chip, CMD_WRSR, 8, sr);
}
esp_err_t spi_flash_common_write_status_8b_wrsr2(esp_flash_t* chip, uint32_t sr)
{
return spi_flash_common_write_qe_sr(chip, CMD_WRSR2, 8, sr);
}
esp_err_t spi_flash_common_set_io_mode(esp_flash_t *chip, esp_flash_wrsr_func_t wrsr_func, esp_flash_rdsr_func_t rdsr_func, uint32_t qe_sr_bit)
{
esp_err_t ret = ESP_OK;
const bool is_quad_mode = esp_flash_is_quad_mode(chip);
bool update_config = false;
/*
* By default, we don't clear the QE bit even the flash mode is not QIO or QOUT. Force clearing
* QE bit by the generic chip driver (command 01H with 2 bytes) may cause the output of some
* chips (MXIC) no longer valid.
* Enable this option when testing a new flash chip for clearing of QE.
*/
const bool force_check = false;
bool need_check = is_quad_mode || force_check;
uint32_t sr_update;
if (need_check) {
// Ensure quad modes are enabled, using the Quad Enable parameters supplied.
uint32_t sr;
ret = (*rdsr_func)(chip, &sr);
if (ret != ESP_OK) {
return ret;
}
ESP_EARLY_LOGD(TAG, "set_io_mode: status before 0x%x", sr);
if (is_quad_mode) {
sr_update = sr | qe_sr_bit;
} else {
sr_update = sr & (~qe_sr_bit);
}
ESP_EARLY_LOGV(TAG, "set_io_mode: status update 0x%x", sr_update);
if (sr != sr_update) {
update_config = true;
}
}
if (update_config) {
//some chips needs the write protect to be disabled before writing to Status Register
chip->chip_drv->set_chip_write_protect(chip, false);
ret = (*wrsr_func)(chip, sr_update);
if (ret != ESP_OK) {
chip->chip_drv->set_chip_write_protect(chip, true);
return ret;
}
ret = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->idle_timeout);
if (ret == ESP_ERR_NOT_SUPPORTED) {
chip->chip_drv->set_chip_write_protect(chip, true);
}
/* This function is the fallback approach, so we give it higher tolerance.
* When the previous WRSR is rejected by the flash,
* the result of this function is determined by the result -whether the value of RDSR meets the expectation.
*/
if (ret != ESP_OK && ret != ESP_ERR_NOT_SUPPORTED) {
return ret;
}
/* Check the new QE bit has stayed set */
uint32_t sr;
ret = (*rdsr_func)(chip, &sr);
if (ret != ESP_OK) {
return ret;
}
ESP_EARLY_LOGD(TAG, "set_io_mode: status after 0x%x", sr);
if (sr != sr_update) {
ret = ESP_ERR_FLASH_NO_RESPONSE;
}
}
return ret;
}
#endif // !CONFIG_SPI_FLASH_ROM_IMPL
esp_err_t spi_flash_chip_generic_suspend_cmd_conf(esp_flash_t *chip)
{
// Only XMC support auto-suspend
if (chip->chip_id >> 16 != 0x20) {
ESP_EARLY_LOGE(TAG, "The flash you use doesn't support auto suspend, only \'XMC\' is supported");
return ESP_ERR_NOT_SUPPORTED;
}
spi_flash_sus_cmd_conf sus_conf = {
.sus_mask = 0x80,
.cmd_rdsr = CMD_RDSR2,
.sus_cmd = CMD_SUSPEND,
.res_cmd = CMD_RESUME,
};
return chip->host->driver->sus_setup(chip->host, &sus_conf);
}
Reference in New Issue View Git Blame Copy Permalink