alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
7416c37fe1
esp-idf/examples/protocols/mqtt/tcp
History
David Cermak 31b2702387 esp_netif, examples: esp_netif_init() moved into ESP_ERROR_CHECK() 
esp_netif_init() returns standard esp_err_t error code (unlike tcpip_adapter init), so shall be checked for the return value
Also to make the initialization code more consistent.
2019-12-17 09:07:49 +01:00
..
main esp_netif, examples: esp_netif_init() moved into ESP_ERROR_CHECK() 2019-12-17 09:07:49 +01:00
CMakeLists.txt protocol examples: enable protocol examples for esp32sbeta 2019-11-01 11:14:10 +08:00
Makefile examples/protocols/mqtt: use common network component 2019-04-15 03:32:05 +00:00
mqtt_tcp_example_test.py test: update example and unit tests with new import roles: 2019-12-07 10:34:54 +08:00
README.md examples: change default build instructions in docs to CMake 2019-08-02 16:32:46 +05:30
sdkconfig.ci esp_netif: include tcpip_adapter legacy header by default to provide *implicit* compatiblity 2019-11-13 12:36:25 +01:00

README.md

ESP-MQTT sample application

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example connects to the broker URI selected using idf.py menuconfig (using mqtt tcp transport) and as a demonstration subscribes/unsubscribes and send a message on certain topic. (Please note that the public broker is maintained by the community so may not be always available, for details please see this disclaimer)

Note: If the URI equals FROM_STDIN then the broker address is read from stdin upon application startup (used for testing)

It uses ESP-MQTT library which implements mqtt client to connect to mqtt broker.

How to use example

Hardware Required

This example can be executed on any ESP32 board, the only required interface is WiFi and connection to internet.

Configure the project

  • Open the project configuration menu (idf.py menuconfig)
  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
  • When using Make build system, set Default serial port under Serial flasher config.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (3714) event: sta ip: 192.168.0.139, mask: 255.255.255.0, gw: 192.168.0.2
I (3714) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (3964) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000
I (4164) MQTT_EXAMPLE: MQTT_EVENT_CONNECTED
I (4174) MQTT_EXAMPLE: sent publish successful, msg_id=41464
I (4174) MQTT_EXAMPLE: sent subscribe successful, msg_id=17886
I (4174) MQTT_EXAMPLE: sent subscribe successful, msg_id=42970
I (4184) MQTT_EXAMPLE: sent unsubscribe successful, msg_id=50241
I (4314) MQTT_EXAMPLE: MQTT_EVENT_PUBLISHED, msg_id=41464
I (4484) MQTT_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=17886
I (4484) MQTT_EXAMPLE: sent publish successful, msg_id=0
I (4684) MQTT_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=42970
I (4684) MQTT_EXAMPLE: sent publish successful, msg_id=0
I (4884) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
I (4884) MQTT_EXAMPLE: MQTT_EVENT_DATA
TOPIC=/topic/qos0
DATA=data
I (5194) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
I (5194) MQTT_EXAMPLE: MQTT_EVENT_DATA
TOPIC=/topic/qos0
DATA=data