mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
2073 lines
96 KiB
C
2073 lines
96 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_RTC_CNTL_REG_H_
|
|
#define _SOC_RTC_CNTL_REG_H_
|
|
|
|
/* The value that needs to be written to RTC_CNTL_WDT_WKEY to write-enable the wdt registers */
|
|
#define RTC_CNTL_WDT_WKEY_VALUE 0x50D83AA1
|
|
|
|
|
|
#include "soc.h"
|
|
#define RTC_CNTL_OPTIONS0_REG (DR_REG_RTCCNTL_BASE + 0x0)
|
|
/* RTC_CNTL_SW_SYS_RST : WO ;bitpos:[31] ;default: 1'd0 ; */
|
|
/*description: SW system reset*/
|
|
#define RTC_CNTL_SW_SYS_RST (BIT(31))
|
|
#define RTC_CNTL_SW_SYS_RST_M (BIT(31))
|
|
#define RTC_CNTL_SW_SYS_RST_V 0x1
|
|
#define RTC_CNTL_SW_SYS_RST_S 31
|
|
/* RTC_CNTL_DG_WRAP_FORCE_NORST : R/W ;bitpos:[30] ;default: 1'd0 ; */
|
|
/*description: digital core force no reset in deep sleep*/
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NORST (BIT(30))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NORST_M (BIT(30))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NORST_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NORST_S 30
|
|
/* RTC_CNTL_DG_WRAP_FORCE_RST : R/W ;bitpos:[29] ;default: 1'd0 ; */
|
|
/*description: digital wrap force reset in deep sleep*/
|
|
#define RTC_CNTL_DG_WRAP_FORCE_RST (BIT(29))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_RST_M (BIT(29))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_RST_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_FORCE_RST_S 29
|
|
/* RTC_CNTL_ANALOG_FORCE_NOISO : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ANALOG_FORCE_NOISO (BIT(28))
|
|
#define RTC_CNTL_ANALOG_FORCE_NOISO_M (BIT(28))
|
|
#define RTC_CNTL_ANALOG_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_ANALOG_FORCE_NOISO_S 28
|
|
/* RTC_CNTL_PLL_FORCE_NOISO : R/W ;bitpos:[27] ;default: 1'd1 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_PLL_FORCE_NOISO (BIT(27))
|
|
#define RTC_CNTL_PLL_FORCE_NOISO_M (BIT(27))
|
|
#define RTC_CNTL_PLL_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_PLL_FORCE_NOISO_S 27
|
|
/* RTC_CNTL_XTL_FORCE_NOISO : R/W ;bitpos:[26] ;default: 1'd1 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_XTL_FORCE_NOISO (BIT(26))
|
|
#define RTC_CNTL_XTL_FORCE_NOISO_M (BIT(26))
|
|
#define RTC_CNTL_XTL_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_XTL_FORCE_NOISO_S 26
|
|
/* RTC_CNTL_ANALOG_FORCE_ISO : R/W ;bitpos:[25] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ANALOG_FORCE_ISO (BIT(25))
|
|
#define RTC_CNTL_ANALOG_FORCE_ISO_M (BIT(25))
|
|
#define RTC_CNTL_ANALOG_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_ANALOG_FORCE_ISO_S 25
|
|
/* RTC_CNTL_PLL_FORCE_ISO : R/W ;bitpos:[24] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_PLL_FORCE_ISO (BIT(24))
|
|
#define RTC_CNTL_PLL_FORCE_ISO_M (BIT(24))
|
|
#define RTC_CNTL_PLL_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_PLL_FORCE_ISO_S 24
|
|
/* RTC_CNTL_XTL_FORCE_ISO : R/W ;bitpos:[23] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_XTL_FORCE_ISO (BIT(23))
|
|
#define RTC_CNTL_XTL_FORCE_ISO_M (BIT(23))
|
|
#define RTC_CNTL_XTL_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_XTL_FORCE_ISO_S 23
|
|
/* RTC_CNTL_BIAS_CORE_FORCE_PU : R/W ;bitpos:[22] ;default: 1'd1 ; */
|
|
/*description: BIAS_CORE force power up*/
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PU (BIT(22))
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PU_M (BIT(22))
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PU_S 22
|
|
/* RTC_CNTL_BIAS_CORE_FORCE_PD : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
/*description: BIAS_CORE force power down*/
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PD (BIT(21))
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PD_M (BIT(21))
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_BIAS_CORE_FORCE_PD_S 21
|
|
/* RTC_CNTL_BIAS_CORE_FOLW_8M : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: BIAS_CORE follow CK8M*/
|
|
#define RTC_CNTL_BIAS_CORE_FOLW_8M (BIT(20))
|
|
#define RTC_CNTL_BIAS_CORE_FOLW_8M_M (BIT(20))
|
|
#define RTC_CNTL_BIAS_CORE_FOLW_8M_V 0x1
|
|
#define RTC_CNTL_BIAS_CORE_FOLW_8M_S 20
|
|
/* RTC_CNTL_BIAS_I2C_FORCE_PU : R/W ;bitpos:[19] ;default: 1'd1 ; */
|
|
/*description: BIAS_I2C force power up*/
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PU (BIT(19))
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PU_M (BIT(19))
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PU_S 19
|
|
/* RTC_CNTL_BIAS_I2C_FORCE_PD : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: BIAS_I2C force power down*/
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PD (BIT(18))
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PD_M (BIT(18))
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_BIAS_I2C_FORCE_PD_S 18
|
|
/* RTC_CNTL_BIAS_I2C_FOLW_8M : R/W ;bitpos:[17] ;default: 1'd0 ; */
|
|
/*description: BIAS_I2C follow CK8M*/
|
|
#define RTC_CNTL_BIAS_I2C_FOLW_8M (BIT(17))
|
|
#define RTC_CNTL_BIAS_I2C_FOLW_8M_M (BIT(17))
|
|
#define RTC_CNTL_BIAS_I2C_FOLW_8M_V 0x1
|
|
#define RTC_CNTL_BIAS_I2C_FOLW_8M_S 17
|
|
/* RTC_CNTL_BIAS_FORCE_NOSLEEP : R/W ;bitpos:[16] ;default: 1'd1 ; */
|
|
/*description: BIAS_SLEEP force no sleep*/
|
|
#define RTC_CNTL_BIAS_FORCE_NOSLEEP (BIT(16))
|
|
#define RTC_CNTL_BIAS_FORCE_NOSLEEP_M (BIT(16))
|
|
#define RTC_CNTL_BIAS_FORCE_NOSLEEP_V 0x1
|
|
#define RTC_CNTL_BIAS_FORCE_NOSLEEP_S 16
|
|
/* RTC_CNTL_BIAS_FORCE_SLEEP : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: BIAS_SLEEP force sleep*/
|
|
#define RTC_CNTL_BIAS_FORCE_SLEEP (BIT(15))
|
|
#define RTC_CNTL_BIAS_FORCE_SLEEP_M (BIT(15))
|
|
#define RTC_CNTL_BIAS_FORCE_SLEEP_V 0x1
|
|
#define RTC_CNTL_BIAS_FORCE_SLEEP_S 15
|
|
/* RTC_CNTL_BIAS_SLEEP_FOLW_8M : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: BIAS_SLEEP follow CK8M*/
|
|
#define RTC_CNTL_BIAS_SLEEP_FOLW_8M (BIT(14))
|
|
#define RTC_CNTL_BIAS_SLEEP_FOLW_8M_M (BIT(14))
|
|
#define RTC_CNTL_BIAS_SLEEP_FOLW_8M_V 0x1
|
|
#define RTC_CNTL_BIAS_SLEEP_FOLW_8M_S 14
|
|
/* RTC_CNTL_XTL_FORCE_PU : R/W ;bitpos:[13] ;default: 1'd1 ; */
|
|
/*description: crystall force power up*/
|
|
#define RTC_CNTL_XTL_FORCE_PU (BIT(13))
|
|
#define RTC_CNTL_XTL_FORCE_PU_M (BIT(13))
|
|
#define RTC_CNTL_XTL_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_XTL_FORCE_PU_S 13
|
|
/* RTC_CNTL_XTL_FORCE_PD : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: crystall force power down*/
|
|
#define RTC_CNTL_XTL_FORCE_PD (BIT(12))
|
|
#define RTC_CNTL_XTL_FORCE_PD_M (BIT(12))
|
|
#define RTC_CNTL_XTL_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_XTL_FORCE_PD_S 12
|
|
/* RTC_CNTL_BBPLL_FORCE_PU : R/W ;bitpos:[11] ;default: 1'd0 ; */
|
|
/*description: BB_PLL force power up*/
|
|
#define RTC_CNTL_BBPLL_FORCE_PU (BIT(11))
|
|
#define RTC_CNTL_BBPLL_FORCE_PU_M (BIT(11))
|
|
#define RTC_CNTL_BBPLL_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_BBPLL_FORCE_PU_S 11
|
|
/* RTC_CNTL_BBPLL_FORCE_PD : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: BB_PLL force power down*/
|
|
#define RTC_CNTL_BBPLL_FORCE_PD (BIT(10))
|
|
#define RTC_CNTL_BBPLL_FORCE_PD_M (BIT(10))
|
|
#define RTC_CNTL_BBPLL_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_BBPLL_FORCE_PD_S 10
|
|
/* RTC_CNTL_BBPLL_I2C_FORCE_PU : R/W ;bitpos:[9] ;default: 1'd0 ; */
|
|
/*description: BB_PLL_I2C force power up*/
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PU (BIT(9))
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PU_M (BIT(9))
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PU_S 9
|
|
/* RTC_CNTL_BBPLL_I2C_FORCE_PD : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: BB_PLL _I2C force power down*/
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PD (BIT(8))
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PD_M (BIT(8))
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_BBPLL_I2C_FORCE_PD_S 8
|
|
/* RTC_CNTL_BB_I2C_FORCE_PU : R/W ;bitpos:[7] ;default: 1'd0 ; */
|
|
/*description: BB_I2C force power up*/
|
|
#define RTC_CNTL_BB_I2C_FORCE_PU (BIT(7))
|
|
#define RTC_CNTL_BB_I2C_FORCE_PU_M (BIT(7))
|
|
#define RTC_CNTL_BB_I2C_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_BB_I2C_FORCE_PU_S 7
|
|
/* RTC_CNTL_BB_I2C_FORCE_PD : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: BB_I2C force power down*/
|
|
#define RTC_CNTL_BB_I2C_FORCE_PD (BIT(6))
|
|
#define RTC_CNTL_BB_I2C_FORCE_PD_M (BIT(6))
|
|
#define RTC_CNTL_BB_I2C_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_BB_I2C_FORCE_PD_S 6
|
|
/* RTC_CNTL_SW_PROCPU_RST : WO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: PRO CPU SW reset*/
|
|
#define RTC_CNTL_SW_PROCPU_RST (BIT(5))
|
|
#define RTC_CNTL_SW_PROCPU_RST_M (BIT(5))
|
|
#define RTC_CNTL_SW_PROCPU_RST_V 0x1
|
|
#define RTC_CNTL_SW_PROCPU_RST_S 5
|
|
/* RTC_CNTL_SW_APPCPU_RST : WO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: APP CPU SW reset*/
|
|
#define RTC_CNTL_SW_APPCPU_RST (BIT(4))
|
|
#define RTC_CNTL_SW_APPCPU_RST_M (BIT(4))
|
|
#define RTC_CNTL_SW_APPCPU_RST_V 0x1
|
|
#define RTC_CNTL_SW_APPCPU_RST_S 4
|
|
/* RTC_CNTL_SW_STALL_PROCPU_C0 : R/W ;bitpos:[3:2] ;default: 2'b0 ; */
|
|
/*description: {reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} ==
|
|
0x86 will stall PRO CPU*/
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C0 0x00000003
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C0_M ((RTC_CNTL_SW_STALL_PROCPU_C0_V)<<(RTC_CNTL_SW_STALL_PROCPU_C0_S))
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C0_V 0x3
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C0_S 2
|
|
/* RTC_CNTL_SW_STALL_APPCPU_C0 : R/W ;bitpos:[1:0] ;default: 2'b0 ; */
|
|
/*description: {reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} ==
|
|
0x86 will stall APP CPU*/
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C0 0x00000003
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C0_M ((RTC_CNTL_SW_STALL_APPCPU_C0_V)<<(RTC_CNTL_SW_STALL_APPCPU_C0_S))
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C0_V 0x3
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C0_S 0
|
|
|
|
#define RTC_CNTL_SLP_TIMER0_REG (DR_REG_RTCCNTL_BASE + 0x4)
|
|
/* RTC_CNTL_SLP_VAL_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: RTC sleep timer low 32 bits*/
|
|
#define RTC_CNTL_SLP_VAL_LO 0xFFFFFFFF
|
|
#define RTC_CNTL_SLP_VAL_LO_M ((RTC_CNTL_SLP_VAL_LO_V)<<(RTC_CNTL_SLP_VAL_LO_S))
|
|
#define RTC_CNTL_SLP_VAL_LO_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SLP_VAL_LO_S 0
|
|
|
|
#define RTC_CNTL_SLP_TIMER1_REG (DR_REG_RTCCNTL_BASE + 0x8)
|
|
/* RTC_CNTL_MAIN_TIMER_ALARM_EN : R/W ;bitpos:[16] ;default: 1'h0 ; */
|
|
/*description: timer alarm enable bit*/
|
|
#define RTC_CNTL_MAIN_TIMER_ALARM_EN (BIT(16))
|
|
#define RTC_CNTL_MAIN_TIMER_ALARM_EN_M (BIT(16))
|
|
#define RTC_CNTL_MAIN_TIMER_ALARM_EN_V 0x1
|
|
#define RTC_CNTL_MAIN_TIMER_ALARM_EN_S 16
|
|
/* RTC_CNTL_SLP_VAL_HI : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: RTC sleep timer high 16 bits*/
|
|
#define RTC_CNTL_SLP_VAL_HI 0x0000FFFF
|
|
#define RTC_CNTL_SLP_VAL_HI_M ((RTC_CNTL_SLP_VAL_HI_V)<<(RTC_CNTL_SLP_VAL_HI_S))
|
|
#define RTC_CNTL_SLP_VAL_HI_V 0xFFFF
|
|
#define RTC_CNTL_SLP_VAL_HI_S 0
|
|
|
|
#define RTC_CNTL_TIME_UPDATE_REG (DR_REG_RTCCNTL_BASE + 0xc)
|
|
/* RTC_CNTL_TIME_UPDATE : WO ;bitpos:[31] ;default: 1'h0 ; */
|
|
/*description: Set 1: to update register with RTC timer*/
|
|
#define RTC_CNTL_TIME_UPDATE (BIT(31))
|
|
#define RTC_CNTL_TIME_UPDATE_M (BIT(31))
|
|
#define RTC_CNTL_TIME_UPDATE_V 0x1
|
|
#define RTC_CNTL_TIME_UPDATE_S 31
|
|
/* RTC_CNTL_TIME_VALID : RO ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: To indicate the register is updated*/
|
|
#define RTC_CNTL_TIME_VALID (BIT(30))
|
|
#define RTC_CNTL_TIME_VALID_M (BIT(30))
|
|
#define RTC_CNTL_TIME_VALID_V 0x1
|
|
#define RTC_CNTL_TIME_VALID_S 30
|
|
|
|
#define RTC_CNTL_TIME0_REG (DR_REG_RTCCNTL_BASE + 0x10)
|
|
/* RTC_CNTL_TIME_LO : RO ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: RTC timer low 32 bits*/
|
|
#define RTC_CNTL_TIME_LO 0xFFFFFFFF
|
|
#define RTC_CNTL_TIME_LO_M ((RTC_CNTL_TIME_LO_V)<<(RTC_CNTL_TIME_LO_S))
|
|
#define RTC_CNTL_TIME_LO_V 0xFFFFFFFF
|
|
#define RTC_CNTL_TIME_LO_S 0
|
|
|
|
#define RTC_CNTL_TIME1_REG (DR_REG_RTCCNTL_BASE + 0x14)
|
|
/* RTC_CNTL_TIME_HI : RO ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
/*description: RTC timer high 16 bits*/
|
|
#define RTC_CNTL_TIME_HI 0x0000FFFF
|
|
#define RTC_CNTL_TIME_HI_M ((RTC_CNTL_TIME_HI_V)<<(RTC_CNTL_TIME_HI_S))
|
|
#define RTC_CNTL_TIME_HI_V 0xFFFF
|
|
#define RTC_CNTL_TIME_HI_S 0
|
|
|
|
#define RTC_CNTL_STATE0_REG (DR_REG_RTCCNTL_BASE + 0x18)
|
|
/* RTC_CNTL_SLEEP_EN : R/W ;bitpos:[31] ;default: 1'd0 ; */
|
|
/*description: sleep enable bit*/
|
|
#define RTC_CNTL_SLEEP_EN (BIT(31))
|
|
#define RTC_CNTL_SLEEP_EN_M (BIT(31))
|
|
#define RTC_CNTL_SLEEP_EN_V 0x1
|
|
#define RTC_CNTL_SLEEP_EN_S 31
|
|
/* RTC_CNTL_SLP_REJECT : R/W ;bitpos:[30] ;default: 1'd0 ; */
|
|
/*description: sleep reject bit*/
|
|
#define RTC_CNTL_SLP_REJECT (BIT(30))
|
|
#define RTC_CNTL_SLP_REJECT_M (BIT(30))
|
|
#define RTC_CNTL_SLP_REJECT_V 0x1
|
|
#define RTC_CNTL_SLP_REJECT_S 30
|
|
/* RTC_CNTL_SLP_WAKEUP : R/W ;bitpos:[29] ;default: 1'd0 ; */
|
|
/*description: sleep wakeup bit*/
|
|
#define RTC_CNTL_SLP_WAKEUP (BIT(29))
|
|
#define RTC_CNTL_SLP_WAKEUP_M (BIT(29))
|
|
#define RTC_CNTL_SLP_WAKEUP_V 0x1
|
|
#define RTC_CNTL_SLP_WAKEUP_S 29
|
|
/* RTC_CNTL_SDIO_ACTIVE_IND : RO ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: SDIO active indication*/
|
|
#define RTC_CNTL_SDIO_ACTIVE_IND (BIT(28))
|
|
#define RTC_CNTL_SDIO_ACTIVE_IND_M (BIT(28))
|
|
#define RTC_CNTL_SDIO_ACTIVE_IND_V 0x1
|
|
#define RTC_CNTL_SDIO_ACTIVE_IND_S 28
|
|
/* RTC_CNTL_ULP_CP_SLP_TIMER_EN : R/W ;bitpos:[24] ;default: 1'd0 ; */
|
|
/*description: ULP-coprocessor timer enable bit*/
|
|
#define RTC_CNTL_ULP_CP_SLP_TIMER_EN (BIT(24))
|
|
#define RTC_CNTL_ULP_CP_SLP_TIMER_EN_M (BIT(24))
|
|
#define RTC_CNTL_ULP_CP_SLP_TIMER_EN_V 0x1
|
|
#define RTC_CNTL_ULP_CP_SLP_TIMER_EN_S 24
|
|
/* RTC_CNTL_TOUCH_SLP_TIMER_EN : R/W ;bitpos:[23] ;default: 1'd0 ; */
|
|
/*description: touch timer enable bit*/
|
|
#define RTC_CNTL_TOUCH_SLP_TIMER_EN (BIT(23))
|
|
#define RTC_CNTL_TOUCH_SLP_TIMER_EN_M (BIT(23))
|
|
#define RTC_CNTL_TOUCH_SLP_TIMER_EN_V 0x1
|
|
#define RTC_CNTL_TOUCH_SLP_TIMER_EN_S 23
|
|
/* RTC_CNTL_APB2RTC_BRIDGE_SEL : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: 1: APB to RTC using bridge 0: APB to RTC using sync*/
|
|
#define RTC_CNTL_APB2RTC_BRIDGE_SEL (BIT(22))
|
|
#define RTC_CNTL_APB2RTC_BRIDGE_SEL_M (BIT(22))
|
|
#define RTC_CNTL_APB2RTC_BRIDGE_SEL_V 0x1
|
|
#define RTC_CNTL_APB2RTC_BRIDGE_SEL_S 22
|
|
/* RTC_CNTL_ULP_CP_WAKEUP_FORCE_EN : R/W ;bitpos:[21] ;default: 1'd1 ; */
|
|
/*description: ULP-coprocessor force wake up*/
|
|
#define RTC_CNTL_ULP_CP_WAKEUP_FORCE_EN (BIT(21))
|
|
#define RTC_CNTL_ULP_CP_WAKEUP_FORCE_EN_M (BIT(21))
|
|
#define RTC_CNTL_ULP_CP_WAKEUP_FORCE_EN_V 0x1
|
|
#define RTC_CNTL_ULP_CP_WAKEUP_FORCE_EN_S 21
|
|
/* RTC_CNTL_TOUCH_WAKEUP_FORCE_EN : R/W ;bitpos:[20] ;default: 1'd1 ; */
|
|
/*description: touch controller force wake up*/
|
|
#define RTC_CNTL_TOUCH_WAKEUP_FORCE_EN (BIT(20))
|
|
#define RTC_CNTL_TOUCH_WAKEUP_FORCE_EN_M (BIT(20))
|
|
#define RTC_CNTL_TOUCH_WAKEUP_FORCE_EN_V 0x1
|
|
#define RTC_CNTL_TOUCH_WAKEUP_FORCE_EN_S 20
|
|
|
|
#define RTC_CNTL_TIMER1_REG (DR_REG_RTCCNTL_BASE + 0x1c)
|
|
/* RTC_CNTL_PLL_BUF_WAIT : R/W ;bitpos:[31:24] ;default: 8'd40 ; */
|
|
/*description: PLL wait cycles in slow_clk_rtc*/
|
|
#define RTC_CNTL_PLL_BUF_WAIT 0x000000FF
|
|
#define RTC_CNTL_PLL_BUF_WAIT_M ((RTC_CNTL_PLL_BUF_WAIT_V)<<(RTC_CNTL_PLL_BUF_WAIT_S))
|
|
#define RTC_CNTL_PLL_BUF_WAIT_V 0xFF
|
|
#define RTC_CNTL_PLL_BUF_WAIT_S 24
|
|
#define RTC_CNTL_PLL_BUF_WAIT_DEFAULT 20
|
|
/* RTC_CNTL_XTL_BUF_WAIT : R/W ;bitpos:[23:14] ;default: 10'd80 ; */
|
|
/*description: XTAL wait cycles in slow_clk_rtc*/
|
|
#define RTC_CNTL_XTL_BUF_WAIT 0x000003FF
|
|
#define RTC_CNTL_XTL_BUF_WAIT_M ((RTC_CNTL_XTL_BUF_WAIT_V)<<(RTC_CNTL_XTL_BUF_WAIT_S))
|
|
#define RTC_CNTL_XTL_BUF_WAIT_V 0x3FF
|
|
#define RTC_CNTL_XTL_BUF_WAIT_S 14
|
|
#define RTC_CNTL_XTL_BUF_WAIT_DEFAULT 20
|
|
/* RTC_CNTL_CK8M_WAIT : R/W ;bitpos:[13:6] ;default: 8'h10 ; */
|
|
/*description: CK8M wait cycles in slow_clk_rtc*/
|
|
#define RTC_CNTL_CK8M_WAIT 0x000000FF
|
|
#define RTC_CNTL_CK8M_WAIT_M ((RTC_CNTL_CK8M_WAIT_V)<<(RTC_CNTL_CK8M_WAIT_S))
|
|
#define RTC_CNTL_CK8M_WAIT_V 0xFF
|
|
#define RTC_CNTL_CK8M_WAIT_S 6
|
|
#define RTC_CNTL_CK8M_WAIT_DEFAULT 20
|
|
/* RTC_CNTL_CPU_STALL_WAIT : R/W ;bitpos:[5:1] ;default: 5'd1 ; */
|
|
/*description: CPU stall wait cycles in fast_clk_rtc*/
|
|
#define RTC_CNTL_CPU_STALL_WAIT 0x0000001F
|
|
#define RTC_CNTL_CPU_STALL_WAIT_M ((RTC_CNTL_CPU_STALL_WAIT_V)<<(RTC_CNTL_CPU_STALL_WAIT_S))
|
|
#define RTC_CNTL_CPU_STALL_WAIT_V 0x1F
|
|
#define RTC_CNTL_CPU_STALL_WAIT_S 1
|
|
/* RTC_CNTL_CPU_STALL_EN : R/W ;bitpos:[0] ;default: 1'd1 ; */
|
|
/*description: CPU stall enable bit*/
|
|
#define RTC_CNTL_CPU_STALL_EN (BIT(0))
|
|
#define RTC_CNTL_CPU_STALL_EN_M (BIT(0))
|
|
#define RTC_CNTL_CPU_STALL_EN_V 0x1
|
|
#define RTC_CNTL_CPU_STALL_EN_S 0
|
|
|
|
#define RTC_CNTL_TIMER2_REG (DR_REG_RTCCNTL_BASE + 0x20)
|
|
/* RTC_CNTL_MIN_TIME_CK8M_OFF : R/W ;bitpos:[31:24] ;default: 8'h1 ; */
|
|
/*description: minimal cycles in slow_clk_rtc for CK8M in power down state*/
|
|
#define RTC_CNTL_MIN_TIME_CK8M_OFF 0x000000FF
|
|
#define RTC_CNTL_MIN_TIME_CK8M_OFF_M ((RTC_CNTL_MIN_TIME_CK8M_OFF_V)<<(RTC_CNTL_MIN_TIME_CK8M_OFF_S))
|
|
#define RTC_CNTL_MIN_TIME_CK8M_OFF_V 0xFF
|
|
#define RTC_CNTL_MIN_TIME_CK8M_OFF_S 24
|
|
/* RTC_CNTL_ULPCP_TOUCH_START_WAIT : R/W ;bitpos:[23:15] ;default: 9'h10 ; */
|
|
/*description: wait cycles in slow_clk_rtc before ULP-coprocessor / touch controller
|
|
start to work*/
|
|
#define RTC_CNTL_ULPCP_TOUCH_START_WAIT 0x000001FF
|
|
#define RTC_CNTL_ULPCP_TOUCH_START_WAIT_M ((RTC_CNTL_ULPCP_TOUCH_START_WAIT_V)<<(RTC_CNTL_ULPCP_TOUCH_START_WAIT_S))
|
|
#define RTC_CNTL_ULPCP_TOUCH_START_WAIT_V 0x1FF
|
|
#define RTC_CNTL_ULPCP_TOUCH_START_WAIT_S 15
|
|
|
|
#define RTC_CNTL_TIMER3_REG (DR_REG_RTCCNTL_BASE + 0x24)
|
|
/* RTC_CNTL_ROM_RAM_POWERUP_TIMER : R/W ;bitpos:[31:25] ;default: 7'd10 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ROM_RAM_POWERUP_TIMER 0x0000007F
|
|
#define RTC_CNTL_ROM_RAM_POWERUP_TIMER_M ((RTC_CNTL_ROM_RAM_POWERUP_TIMER_V)<<(RTC_CNTL_ROM_RAM_POWERUP_TIMER_S))
|
|
#define RTC_CNTL_ROM_RAM_POWERUP_TIMER_V 0x7F
|
|
#define RTC_CNTL_ROM_RAM_POWERUP_TIMER_S 25
|
|
/* RTC_CNTL_ROM_RAM_WAIT_TIMER : R/W ;bitpos:[24:16] ;default: 9'h16 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ROM_RAM_WAIT_TIMER 0x000001FF
|
|
#define RTC_CNTL_ROM_RAM_WAIT_TIMER_M ((RTC_CNTL_ROM_RAM_WAIT_TIMER_V)<<(RTC_CNTL_ROM_RAM_WAIT_TIMER_S))
|
|
#define RTC_CNTL_ROM_RAM_WAIT_TIMER_V 0x1FF
|
|
#define RTC_CNTL_ROM_RAM_WAIT_TIMER_S 16
|
|
/* RTC_CNTL_WIFI_POWERUP_TIMER : R/W ;bitpos:[15:9] ;default: 7'h5 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WIFI_POWERUP_TIMER 0x0000007F
|
|
#define RTC_CNTL_WIFI_POWERUP_TIMER_M ((RTC_CNTL_WIFI_POWERUP_TIMER_V)<<(RTC_CNTL_WIFI_POWERUP_TIMER_S))
|
|
#define RTC_CNTL_WIFI_POWERUP_TIMER_V 0x7F
|
|
#define RTC_CNTL_WIFI_POWERUP_TIMER_S 9
|
|
/* RTC_CNTL_WIFI_WAIT_TIMER : R/W ;bitpos:[8:0] ;default: 9'h8 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WIFI_WAIT_TIMER 0x000001FF
|
|
#define RTC_CNTL_WIFI_WAIT_TIMER_M ((RTC_CNTL_WIFI_WAIT_TIMER_V)<<(RTC_CNTL_WIFI_WAIT_TIMER_S))
|
|
#define RTC_CNTL_WIFI_WAIT_TIMER_V 0x1FF
|
|
#define RTC_CNTL_WIFI_WAIT_TIMER_S 0
|
|
|
|
#define RTC_CNTL_TIMER4_REG (DR_REG_RTCCNTL_BASE + 0x28)
|
|
/* RTC_CNTL_DG_WRAP_POWERUP_TIMER : R/W ;bitpos:[31:25] ;default: 7'h8 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_DG_WRAP_POWERUP_TIMER 0x0000007F
|
|
#define RTC_CNTL_DG_WRAP_POWERUP_TIMER_M ((RTC_CNTL_DG_WRAP_POWERUP_TIMER_V)<<(RTC_CNTL_DG_WRAP_POWERUP_TIMER_S))
|
|
#define RTC_CNTL_DG_WRAP_POWERUP_TIMER_V 0x7F
|
|
#define RTC_CNTL_DG_WRAP_POWERUP_TIMER_S 25
|
|
/* RTC_CNTL_DG_WRAP_WAIT_TIMER : R/W ;bitpos:[24:16] ;default: 9'h20 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_DG_WRAP_WAIT_TIMER 0x000001FF
|
|
#define RTC_CNTL_DG_WRAP_WAIT_TIMER_M ((RTC_CNTL_DG_WRAP_WAIT_TIMER_V)<<(RTC_CNTL_DG_WRAP_WAIT_TIMER_S))
|
|
#define RTC_CNTL_DG_WRAP_WAIT_TIMER_V 0x1FF
|
|
#define RTC_CNTL_DG_WRAP_WAIT_TIMER_S 16
|
|
/* RTC_CNTL_POWERUP_TIMER : R/W ;bitpos:[15:9] ;default: 7'h5 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_POWERUP_TIMER 0x0000007F
|
|
#define RTC_CNTL_POWERUP_TIMER_M ((RTC_CNTL_POWERUP_TIMER_V)<<(RTC_CNTL_POWERUP_TIMER_S))
|
|
#define RTC_CNTL_POWERUP_TIMER_V 0x7F
|
|
#define RTC_CNTL_POWERUP_TIMER_S 9
|
|
/* RTC_CNTL_WAIT_TIMER : R/W ;bitpos:[8:0] ;default: 9'h8 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WAIT_TIMER 0x000001FF
|
|
#define RTC_CNTL_WAIT_TIMER_M ((RTC_CNTL_WAIT_TIMER_V)<<(RTC_CNTL_WAIT_TIMER_S))
|
|
#define RTC_CNTL_WAIT_TIMER_V 0x1FF
|
|
#define RTC_CNTL_WAIT_TIMER_S 0
|
|
|
|
#define RTC_CNTL_TIMER5_REG (DR_REG_RTCCNTL_BASE + 0x2c)
|
|
/* RTC_CNTL_RTCMEM_POWERUP_TIMER : R/W ;bitpos:[31:25] ;default: 7'h9 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_RTCMEM_POWERUP_TIMER 0x0000007F
|
|
#define RTC_CNTL_RTCMEM_POWERUP_TIMER_M ((RTC_CNTL_RTCMEM_POWERUP_TIMER_V)<<(RTC_CNTL_RTCMEM_POWERUP_TIMER_S))
|
|
#define RTC_CNTL_RTCMEM_POWERUP_TIMER_V 0x7F
|
|
#define RTC_CNTL_RTCMEM_POWERUP_TIMER_S 25
|
|
/* RTC_CNTL_RTCMEM_WAIT_TIMER : R/W ;bitpos:[24:16] ;default: 9'h14 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_RTCMEM_WAIT_TIMER 0x000001FF
|
|
#define RTC_CNTL_RTCMEM_WAIT_TIMER_M ((RTC_CNTL_RTCMEM_WAIT_TIMER_V)<<(RTC_CNTL_RTCMEM_WAIT_TIMER_S))
|
|
#define RTC_CNTL_RTCMEM_WAIT_TIMER_V 0x1FF
|
|
#define RTC_CNTL_RTCMEM_WAIT_TIMER_S 16
|
|
/* RTC_CNTL_MIN_SLP_VAL : R/W ;bitpos:[15:8] ;default: 8'h80 ; */
|
|
/*description: minimal sleep cycles in slow_clk_rtc*/
|
|
#define RTC_CNTL_MIN_SLP_VAL 0x000000FF
|
|
#define RTC_CNTL_MIN_SLP_VAL_M ((RTC_CNTL_MIN_SLP_VAL_V)<<(RTC_CNTL_MIN_SLP_VAL_S))
|
|
#define RTC_CNTL_MIN_SLP_VAL_V 0xFF
|
|
#define RTC_CNTL_MIN_SLP_VAL_S 8
|
|
#define RTC_CNTL_MIN_SLP_VAL_MIN 2
|
|
/* RTC_CNTL_ULP_CP_SUBTIMER_PREDIV : R/W ;bitpos:[7:0] ;default: 8'd1 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ULP_CP_SUBTIMER_PREDIV 0x000000FF
|
|
#define RTC_CNTL_ULP_CP_SUBTIMER_PREDIV_M ((RTC_CNTL_ULP_CP_SUBTIMER_PREDIV_V)<<(RTC_CNTL_ULP_CP_SUBTIMER_PREDIV_S))
|
|
#define RTC_CNTL_ULP_CP_SUBTIMER_PREDIV_V 0xFF
|
|
#define RTC_CNTL_ULP_CP_SUBTIMER_PREDIV_S 0
|
|
|
|
#define RTC_CNTL_ANA_CONF_REG (DR_REG_RTCCNTL_BASE + 0x30)
|
|
/* RTC_CNTL_PLL_I2C_PU : R/W ;bitpos:[31] ;default: 1'd0 ; */
|
|
/*description: 1: PLL_I2C power up otherwise power down*/
|
|
#define RTC_CNTL_PLL_I2C_PU (BIT(31))
|
|
#define RTC_CNTL_PLL_I2C_PU_M (BIT(31))
|
|
#define RTC_CNTL_PLL_I2C_PU_V 0x1
|
|
#define RTC_CNTL_PLL_I2C_PU_S 31
|
|
/* RTC_CNTL_CKGEN_I2C_PU : R/W ;bitpos:[30] ;default: 1'd0 ; */
|
|
/*description: 1: CKGEN_I2C power up otherwise power down*/
|
|
#define RTC_CNTL_CKGEN_I2C_PU (BIT(30))
|
|
#define RTC_CNTL_CKGEN_I2C_PU_M (BIT(30))
|
|
#define RTC_CNTL_CKGEN_I2C_PU_V 0x1
|
|
#define RTC_CNTL_CKGEN_I2C_PU_S 30
|
|
/* RTC_CNTL_RFRX_PBUS_PU : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: 1: RFRX_PBUS power up otherwise power down*/
|
|
#define RTC_CNTL_RFRX_PBUS_PU (BIT(28))
|
|
#define RTC_CNTL_RFRX_PBUS_PU_M (BIT(28))
|
|
#define RTC_CNTL_RFRX_PBUS_PU_V 0x1
|
|
#define RTC_CNTL_RFRX_PBUS_PU_S 28
|
|
/* RTC_CNTL_TXRF_I2C_PU : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: 1: TXRF_I2C power up otherwise power down*/
|
|
#define RTC_CNTL_TXRF_I2C_PU (BIT(27))
|
|
#define RTC_CNTL_TXRF_I2C_PU_M (BIT(27))
|
|
#define RTC_CNTL_TXRF_I2C_PU_V 0x1
|
|
#define RTC_CNTL_TXRF_I2C_PU_S 27
|
|
/* RTC_CNTL_PVTMON_PU : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: 1: PVTMON power up otherwise power down*/
|
|
#define RTC_CNTL_PVTMON_PU (BIT(26))
|
|
#define RTC_CNTL_PVTMON_PU_M (BIT(26))
|
|
#define RTC_CNTL_PVTMON_PU_V 0x1
|
|
#define RTC_CNTL_PVTMON_PU_S 26
|
|
/* RTC_CNTL_BBPLL_CAL_SLP_START : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: start BBPLL calibration during sleep*/
|
|
#define RTC_CNTL_BBPLL_CAL_SLP_START (BIT(25))
|
|
#define RTC_CNTL_BBPLL_CAL_SLP_START_M (BIT(25))
|
|
#define RTC_CNTL_BBPLL_CAL_SLP_START_V 0x1
|
|
#define RTC_CNTL_BBPLL_CAL_SLP_START_S 25
|
|
/* RTC_CNTL_PLLA_FORCE_PU : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: PLLA force power up*/
|
|
#define RTC_CNTL_PLLA_FORCE_PU (BIT(24))
|
|
#define RTC_CNTL_PLLA_FORCE_PU_M (BIT(24))
|
|
#define RTC_CNTL_PLLA_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_PLLA_FORCE_PU_S 24
|
|
/* RTC_CNTL_PLLA_FORCE_PD : R/W ;bitpos:[23] ;default: 1'b1 ; */
|
|
/*description: PLLA force power down*/
|
|
#define RTC_CNTL_PLLA_FORCE_PD (BIT(23))
|
|
#define RTC_CNTL_PLLA_FORCE_PD_M (BIT(23))
|
|
#define RTC_CNTL_PLLA_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_PLLA_FORCE_PD_S 23
|
|
|
|
#define RTC_CNTL_RESET_STATE_REG (DR_REG_RTCCNTL_BASE + 0x34)
|
|
/* RTC_CNTL_PROCPU_STAT_VECTOR_SEL : R/W ;bitpos:[13] ;default: 1'b1 ; */
|
|
/*description: PRO CPU state vector sel*/
|
|
#define RTC_CNTL_PROCPU_STAT_VECTOR_SEL (BIT(13))
|
|
#define RTC_CNTL_PROCPU_STAT_VECTOR_SEL_M (BIT(13))
|
|
#define RTC_CNTL_PROCPU_STAT_VECTOR_SEL_V 0x1
|
|
#define RTC_CNTL_PROCPU_STAT_VECTOR_SEL_S 13
|
|
/* RTC_CNTL_APPCPU_STAT_VECTOR_SEL : R/W ;bitpos:[12] ;default: 1'b1 ; */
|
|
/*description: APP CPU state vector sel*/
|
|
#define RTC_CNTL_APPCPU_STAT_VECTOR_SEL (BIT(12))
|
|
#define RTC_CNTL_APPCPU_STAT_VECTOR_SEL_M (BIT(12))
|
|
#define RTC_CNTL_APPCPU_STAT_VECTOR_SEL_V 0x1
|
|
#define RTC_CNTL_APPCPU_STAT_VECTOR_SEL_S 12
|
|
/* RTC_CNTL_RESET_CAUSE_APPCPU : RO ;bitpos:[11:6] ;default: 0 ; */
|
|
/*description: reset cause of APP CPU*/
|
|
#define RTC_CNTL_RESET_CAUSE_APPCPU 0x0000003F
|
|
#define RTC_CNTL_RESET_CAUSE_APPCPU_M ((RTC_CNTL_RESET_CAUSE_APPCPU_V)<<(RTC_CNTL_RESET_CAUSE_APPCPU_S))
|
|
#define RTC_CNTL_RESET_CAUSE_APPCPU_V 0x3F
|
|
#define RTC_CNTL_RESET_CAUSE_APPCPU_S 6
|
|
/* RTC_CNTL_RESET_CAUSE_PROCPU : RO ;bitpos:[5:0] ;default: 0 ; */
|
|
/*description: reset cause of PRO CPU*/
|
|
#define RTC_CNTL_RESET_CAUSE_PROCPU 0x0000003F
|
|
#define RTC_CNTL_RESET_CAUSE_PROCPU_M ((RTC_CNTL_RESET_CAUSE_PROCPU_V)<<(RTC_CNTL_RESET_CAUSE_PROCPU_S))
|
|
#define RTC_CNTL_RESET_CAUSE_PROCPU_V 0x3F
|
|
#define RTC_CNTL_RESET_CAUSE_PROCPU_S 0
|
|
|
|
#define RTC_CNTL_WAKEUP_STATE_REG (DR_REG_RTCCNTL_BASE + 0x38)
|
|
/* RTC_CNTL_GPIO_WAKEUP_FILTER : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: enable filter for gpio wakeup event*/
|
|
#define RTC_CNTL_GPIO_WAKEUP_FILTER (BIT(22))
|
|
#define RTC_CNTL_GPIO_WAKEUP_FILTER_M (BIT(22))
|
|
#define RTC_CNTL_GPIO_WAKEUP_FILTER_V 0x1
|
|
#define RTC_CNTL_GPIO_WAKEUP_FILTER_S 22
|
|
/* RTC_CNTL_WAKEUP_ENA : R/W ;bitpos:[21:11] ;default: 11'b1100 ; */
|
|
/*description: wakeup enable bitmap*/
|
|
#define RTC_CNTL_WAKEUP_ENA 0x000007FF
|
|
#define RTC_CNTL_WAKEUP_ENA_M ((RTC_CNTL_WAKEUP_ENA_V)<<(RTC_CNTL_WAKEUP_ENA_S))
|
|
#define RTC_CNTL_WAKEUP_ENA_V 0x7FF
|
|
#define RTC_CNTL_WAKEUP_ENA_S 11
|
|
/* RTC_CNTL_WAKEUP_CAUSE : RO ;bitpos:[10:0] ;default: 11'h0 ; */
|
|
/*description: wakeup cause*/
|
|
#define RTC_CNTL_WAKEUP_CAUSE 0x000007FF
|
|
#define RTC_CNTL_WAKEUP_CAUSE_M ((RTC_CNTL_WAKEUP_CAUSE_V)<<(RTC_CNTL_WAKEUP_CAUSE_S))
|
|
#define RTC_CNTL_WAKEUP_CAUSE_V 0x7FF
|
|
#define RTC_CNTL_WAKEUP_CAUSE_S 0
|
|
|
|
#define RTC_CNTL_INT_ENA_REG (DR_REG_RTCCNTL_BASE + 0x3c)
|
|
/* RTC_CNTL_MAIN_TIMER_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: enable RTC main timer interrupt*/
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ENA (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ENA_M (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ENA_V 0x1
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ENA_S 8
|
|
/* RTC_CNTL_BROWN_OUT_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: enable brown out interrupt*/
|
|
#define RTC_CNTL_BROWN_OUT_INT_ENA (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_ENA_M (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_ENA_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_INT_ENA_S 7
|
|
/* RTC_CNTL_TOUCH_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: enable touch interrupt*/
|
|
#define RTC_CNTL_TOUCH_INT_ENA (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_ENA_M (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_ENA_V 0x1
|
|
#define RTC_CNTL_TOUCH_INT_ENA_S 6
|
|
/* RTC_CNTL_ULP_CP_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: enable ULP-coprocessor interrupt*/
|
|
#define RTC_CNTL_ULP_CP_INT_ENA (BIT(5))
|
|
#define RTC_CNTL_ULP_CP_INT_ENA_M (BIT(5))
|
|
#define RTC_CNTL_ULP_CP_INT_ENA_V 0x1
|
|
#define RTC_CNTL_ULP_CP_INT_ENA_S 5
|
|
/* RTC_CNTL_TIME_VALID_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: enable RTC time valid interrupt*/
|
|
#define RTC_CNTL_TIME_VALID_INT_ENA (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_ENA_M (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_ENA_V 0x1
|
|
#define RTC_CNTL_TIME_VALID_INT_ENA_S 4
|
|
/* RTC_CNTL_WDT_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: enable RTC WDT interrupt*/
|
|
#define RTC_CNTL_WDT_INT_ENA (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_ENA_M (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_ENA_V 0x1
|
|
#define RTC_CNTL_WDT_INT_ENA_S 3
|
|
/* RTC_CNTL_SDIO_IDLE_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: enable SDIO idle interrupt*/
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ENA (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ENA_M (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ENA_V 0x1
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ENA_S 2
|
|
/* RTC_CNTL_SLP_REJECT_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: enable sleep reject interrupt*/
|
|
#define RTC_CNTL_SLP_REJECT_INT_ENA (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_ENA_M (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_ENA_V 0x1
|
|
#define RTC_CNTL_SLP_REJECT_INT_ENA_S 1
|
|
/* RTC_CNTL_SLP_WAKEUP_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: enable sleep wakeup interrupt*/
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ENA (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ENA_M (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ENA_V 0x1
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ENA_S 0
|
|
|
|
#define RTC_CNTL_INT_RAW_REG (DR_REG_RTCCNTL_BASE + 0x40)
|
|
/* RTC_CNTL_MAIN_TIMER_INT_RAW : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: RTC main timer interrupt raw*/
|
|
#define RTC_CNTL_MAIN_TIMER_INT_RAW (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_RAW_M (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_RAW_V 0x1
|
|
#define RTC_CNTL_MAIN_TIMER_INT_RAW_S 8
|
|
/* RTC_CNTL_BROWN_OUT_INT_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: brown out interrupt raw*/
|
|
#define RTC_CNTL_BROWN_OUT_INT_RAW (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_RAW_M (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_RAW_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_INT_RAW_S 7
|
|
/* RTC_CNTL_TOUCH_INT_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: touch interrupt raw*/
|
|
#define RTC_CNTL_TOUCH_INT_RAW (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_RAW_M (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_RAW_V 0x1
|
|
#define RTC_CNTL_TOUCH_INT_RAW_S 6
|
|
/* RTC_CNTL_ULP_CP_INT_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: ULP-coprocessor interrupt raw*/
|
|
#define RTC_CNTL_ULP_CP_INT_RAW (BIT(5))
|
|
#define RTC_CNTL_ULP_CP_INT_RAW_M (BIT(5))
|
|
#define RTC_CNTL_ULP_CP_INT_RAW_V 0x1
|
|
#define RTC_CNTL_ULP_CP_INT_RAW_S 5
|
|
/* RTC_CNTL_TIME_VALID_INT_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: RTC time valid interrupt raw*/
|
|
#define RTC_CNTL_TIME_VALID_INT_RAW (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_RAW_M (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_RAW_V 0x1
|
|
#define RTC_CNTL_TIME_VALID_INT_RAW_S 4
|
|
/* RTC_CNTL_WDT_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: RTC WDT interrupt raw*/
|
|
#define RTC_CNTL_WDT_INT_RAW (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_RAW_M (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_RAW_V 0x1
|
|
#define RTC_CNTL_WDT_INT_RAW_S 3
|
|
/* RTC_CNTL_SDIO_IDLE_INT_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: SDIO idle interrupt raw*/
|
|
#define RTC_CNTL_SDIO_IDLE_INT_RAW (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_RAW_M (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_RAW_V 0x1
|
|
#define RTC_CNTL_SDIO_IDLE_INT_RAW_S 2
|
|
/* RTC_CNTL_SLP_REJECT_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: sleep reject interrupt raw*/
|
|
#define RTC_CNTL_SLP_REJECT_INT_RAW (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_RAW_M (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_RAW_V 0x1
|
|
#define RTC_CNTL_SLP_REJECT_INT_RAW_S 1
|
|
/* RTC_CNTL_SLP_WAKEUP_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: sleep wakeup interrupt raw*/
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_RAW (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_RAW_M (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_RAW_V 0x1
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_RAW_S 0
|
|
|
|
#define RTC_CNTL_INT_ST_REG (DR_REG_RTCCNTL_BASE + 0x44)
|
|
/* RTC_CNTL_MAIN_TIMER_INT_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: RTC main timer interrupt state*/
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ST (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ST_M (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ST_V 0x1
|
|
#define RTC_CNTL_MAIN_TIMER_INT_ST_S 8
|
|
/* RTC_CNTL_BROWN_OUT_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: brown out interrupt state*/
|
|
#define RTC_CNTL_BROWN_OUT_INT_ST (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_ST_M (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_ST_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_INT_ST_S 7
|
|
/* RTC_CNTL_TOUCH_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: touch interrupt state*/
|
|
#define RTC_CNTL_TOUCH_INT_ST (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_ST_M (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_ST_V 0x1
|
|
#define RTC_CNTL_TOUCH_INT_ST_S 6
|
|
/* RTC_CNTL_SAR_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: ULP-coprocessor interrupt state*/
|
|
#define RTC_CNTL_SAR_INT_ST (BIT(5))
|
|
#define RTC_CNTL_SAR_INT_ST_M (BIT(5))
|
|
#define RTC_CNTL_SAR_INT_ST_V 0x1
|
|
#define RTC_CNTL_SAR_INT_ST_S 5
|
|
/* RTC_CNTL_TIME_VALID_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: RTC time valid interrupt state*/
|
|
#define RTC_CNTL_TIME_VALID_INT_ST (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_ST_M (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_ST_V 0x1
|
|
#define RTC_CNTL_TIME_VALID_INT_ST_S 4
|
|
/* RTC_CNTL_WDT_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: RTC WDT interrupt state*/
|
|
#define RTC_CNTL_WDT_INT_ST (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_ST_M (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_ST_V 0x1
|
|
#define RTC_CNTL_WDT_INT_ST_S 3
|
|
/* RTC_CNTL_SDIO_IDLE_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: SDIO idle interrupt state*/
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ST (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ST_M (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ST_V 0x1
|
|
#define RTC_CNTL_SDIO_IDLE_INT_ST_S 2
|
|
/* RTC_CNTL_SLP_REJECT_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: sleep reject interrupt state*/
|
|
#define RTC_CNTL_SLP_REJECT_INT_ST (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_ST_M (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_ST_V 0x1
|
|
#define RTC_CNTL_SLP_REJECT_INT_ST_S 1
|
|
/* RTC_CNTL_SLP_WAKEUP_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: sleep wakeup interrupt state*/
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ST (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ST_M (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ST_V 0x1
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_ST_S 0
|
|
|
|
#define RTC_CNTL_INT_CLR_REG (DR_REG_RTCCNTL_BASE + 0x48)
|
|
/* RTC_CNTL_MAIN_TIMER_INT_CLR : WO ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: Clear RTC main timer interrupt state*/
|
|
#define RTC_CNTL_MAIN_TIMER_INT_CLR (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_CLR_M (BIT(8))
|
|
#define RTC_CNTL_MAIN_TIMER_INT_CLR_V 0x1
|
|
#define RTC_CNTL_MAIN_TIMER_INT_CLR_S 8
|
|
/* RTC_CNTL_BROWN_OUT_INT_CLR : WO ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: Clear brown out interrupt state*/
|
|
#define RTC_CNTL_BROWN_OUT_INT_CLR (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_CLR_M (BIT(7))
|
|
#define RTC_CNTL_BROWN_OUT_INT_CLR_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_INT_CLR_S 7
|
|
/* RTC_CNTL_TOUCH_INT_CLR : WO ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: Clear touch interrupt state*/
|
|
#define RTC_CNTL_TOUCH_INT_CLR (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_CLR_M (BIT(6))
|
|
#define RTC_CNTL_TOUCH_INT_CLR_V 0x1
|
|
#define RTC_CNTL_TOUCH_INT_CLR_S 6
|
|
/* RTC_CNTL_SAR_INT_CLR : WO ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: Clear ULP-coprocessor interrupt state*/
|
|
#define RTC_CNTL_SAR_INT_CLR (BIT(5))
|
|
#define RTC_CNTL_SAR_INT_CLR_M (BIT(5))
|
|
#define RTC_CNTL_SAR_INT_CLR_V 0x1
|
|
#define RTC_CNTL_SAR_INT_CLR_S 5
|
|
/* RTC_CNTL_TIME_VALID_INT_CLR : WO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: Clear RTC time valid interrupt state*/
|
|
#define RTC_CNTL_TIME_VALID_INT_CLR (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_CLR_M (BIT(4))
|
|
#define RTC_CNTL_TIME_VALID_INT_CLR_V 0x1
|
|
#define RTC_CNTL_TIME_VALID_INT_CLR_S 4
|
|
/* RTC_CNTL_WDT_INT_CLR : WO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: Clear RTC WDT interrupt state*/
|
|
#define RTC_CNTL_WDT_INT_CLR (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_CLR_M (BIT(3))
|
|
#define RTC_CNTL_WDT_INT_CLR_V 0x1
|
|
#define RTC_CNTL_WDT_INT_CLR_S 3
|
|
/* RTC_CNTL_SDIO_IDLE_INT_CLR : WO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: Clear SDIO idle interrupt state*/
|
|
#define RTC_CNTL_SDIO_IDLE_INT_CLR (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_CLR_M (BIT(2))
|
|
#define RTC_CNTL_SDIO_IDLE_INT_CLR_V 0x1
|
|
#define RTC_CNTL_SDIO_IDLE_INT_CLR_S 2
|
|
/* RTC_CNTL_SLP_REJECT_INT_CLR : WO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: Clear sleep reject interrupt state*/
|
|
#define RTC_CNTL_SLP_REJECT_INT_CLR (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_CLR_M (BIT(1))
|
|
#define RTC_CNTL_SLP_REJECT_INT_CLR_V 0x1
|
|
#define RTC_CNTL_SLP_REJECT_INT_CLR_S 1
|
|
/* RTC_CNTL_SLP_WAKEUP_INT_CLR : WO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: Clear sleep wakeup interrupt state*/
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_CLR (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_CLR_M (BIT(0))
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_CLR_V 0x1
|
|
#define RTC_CNTL_SLP_WAKEUP_INT_CLR_S 0
|
|
|
|
#define RTC_CNTL_STORE0_REG (DR_REG_RTCCNTL_BASE + 0x4c)
|
|
/* RTC_CNTL_SCRATCH0 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH0 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH0_M ((RTC_CNTL_SCRATCH0_V)<<(RTC_CNTL_SCRATCH0_S))
|
|
#define RTC_CNTL_SCRATCH0_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH0_S 0
|
|
|
|
#define RTC_CNTL_STORE1_REG (DR_REG_RTCCNTL_BASE + 0x50)
|
|
/* RTC_CNTL_SCRATCH1 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH1 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH1_M ((RTC_CNTL_SCRATCH1_V)<<(RTC_CNTL_SCRATCH1_S))
|
|
#define RTC_CNTL_SCRATCH1_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH1_S 0
|
|
|
|
#define RTC_CNTL_STORE2_REG (DR_REG_RTCCNTL_BASE + 0x54)
|
|
/* RTC_CNTL_SCRATCH2 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH2 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH2_M ((RTC_CNTL_SCRATCH2_V)<<(RTC_CNTL_SCRATCH2_S))
|
|
#define RTC_CNTL_SCRATCH2_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH2_S 0
|
|
|
|
#define RTC_CNTL_STORE3_REG (DR_REG_RTCCNTL_BASE + 0x58)
|
|
/* RTC_CNTL_SCRATCH3 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH3 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH3_M ((RTC_CNTL_SCRATCH3_V)<<(RTC_CNTL_SCRATCH3_S))
|
|
#define RTC_CNTL_SCRATCH3_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH3_S 0
|
|
|
|
#define RTC_CNTL_EXT_XTL_CONF_REG (DR_REG_RTCCNTL_BASE + 0x5c)
|
|
/* RTC_CNTL_XTL_EXT_CTR_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: enable control XTAL by external pads*/
|
|
#define RTC_CNTL_XTL_EXT_CTR_EN (BIT(31))
|
|
#define RTC_CNTL_XTL_EXT_CTR_EN_M (BIT(31))
|
|
#define RTC_CNTL_XTL_EXT_CTR_EN_V 0x1
|
|
#define RTC_CNTL_XTL_EXT_CTR_EN_S 31
|
|
/* RTC_CNTL_XTL_EXT_CTR_LV : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: 0: power down XTAL at high level 1: power down XTAL at low level*/
|
|
#define RTC_CNTL_XTL_EXT_CTR_LV (BIT(30))
|
|
#define RTC_CNTL_XTL_EXT_CTR_LV_M (BIT(30))
|
|
#define RTC_CNTL_XTL_EXT_CTR_LV_V 0x1
|
|
#define RTC_CNTL_XTL_EXT_CTR_LV_S 30
|
|
|
|
#define RTC_CNTL_EXT_WAKEUP_CONF_REG (DR_REG_RTCCNTL_BASE + 0x60)
|
|
/* RTC_CNTL_EXT_WAKEUP1_LV : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: 0: external wakeup at low level 1: external wakeup at high level*/
|
|
#define RTC_CNTL_EXT_WAKEUP1_LV (BIT(31))
|
|
#define RTC_CNTL_EXT_WAKEUP1_LV_M (BIT(31))
|
|
#define RTC_CNTL_EXT_WAKEUP1_LV_V 0x1
|
|
#define RTC_CNTL_EXT_WAKEUP1_LV_S 31
|
|
/* RTC_CNTL_EXT_WAKEUP0_LV : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: 0: external wakeup at low level 1: external wakeup at high level*/
|
|
#define RTC_CNTL_EXT_WAKEUP0_LV (BIT(30))
|
|
#define RTC_CNTL_EXT_WAKEUP0_LV_M (BIT(30))
|
|
#define RTC_CNTL_EXT_WAKEUP0_LV_V 0x1
|
|
#define RTC_CNTL_EXT_WAKEUP0_LV_S 30
|
|
|
|
#define RTC_CNTL_SLP_REJECT_CONF_REG (DR_REG_RTCCNTL_BASE + 0x64)
|
|
/* RTC_CNTL_REJECT_CAUSE : RO ;bitpos:[31:28] ;default: 4'b0 ; */
|
|
/*description: sleep reject cause*/
|
|
#define RTC_CNTL_REJECT_CAUSE 0x0000000F
|
|
#define RTC_CNTL_REJECT_CAUSE_M ((RTC_CNTL_REJECT_CAUSE_V)<<(RTC_CNTL_REJECT_CAUSE_S))
|
|
#define RTC_CNTL_REJECT_CAUSE_V 0xF
|
|
#define RTC_CNTL_REJECT_CAUSE_S 28
|
|
/* RTC_CNTL_DEEP_SLP_REJECT_EN : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: enable reject for deep sleep*/
|
|
#define RTC_CNTL_DEEP_SLP_REJECT_EN (BIT(27))
|
|
#define RTC_CNTL_DEEP_SLP_REJECT_EN_M (BIT(27))
|
|
#define RTC_CNTL_DEEP_SLP_REJECT_EN_V 0x1
|
|
#define RTC_CNTL_DEEP_SLP_REJECT_EN_S 27
|
|
/* RTC_CNTL_LIGHT_SLP_REJECT_EN : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: enable reject for light sleep*/
|
|
#define RTC_CNTL_LIGHT_SLP_REJECT_EN (BIT(26))
|
|
#define RTC_CNTL_LIGHT_SLP_REJECT_EN_M (BIT(26))
|
|
#define RTC_CNTL_LIGHT_SLP_REJECT_EN_V 0x1
|
|
#define RTC_CNTL_LIGHT_SLP_REJECT_EN_S 26
|
|
/* RTC_CNTL_SDIO_REJECT_EN : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: enable SDIO reject*/
|
|
#define RTC_CNTL_SDIO_REJECT_EN (BIT(25))
|
|
#define RTC_CNTL_SDIO_REJECT_EN_M (BIT(25))
|
|
#define RTC_CNTL_SDIO_REJECT_EN_V 0x1
|
|
#define RTC_CNTL_SDIO_REJECT_EN_S 25
|
|
/* RTC_CNTL_GPIO_REJECT_EN : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: enable GPIO reject*/
|
|
#define RTC_CNTL_GPIO_REJECT_EN (BIT(24))
|
|
#define RTC_CNTL_GPIO_REJECT_EN_M (BIT(24))
|
|
#define RTC_CNTL_GPIO_REJECT_EN_V 0x1
|
|
#define RTC_CNTL_GPIO_REJECT_EN_S 24
|
|
|
|
#define RTC_CNTL_CPU_PERIOD_CONF_REG (DR_REG_RTCCNTL_BASE + 0x68)
|
|
/* RTC_CNTL_CPUPERIOD_SEL : R/W ;bitpos:[31:30] ;default: 2'b00 ; */
|
|
/*description: CPU period sel*/
|
|
#define RTC_CNTL_CPUPERIOD_SEL 0x00000003
|
|
#define RTC_CNTL_CPUPERIOD_SEL_M ((RTC_CNTL_CPUPERIOD_SEL_V)<<(RTC_CNTL_CPUPERIOD_SEL_S))
|
|
#define RTC_CNTL_CPUPERIOD_SEL_V 0x3
|
|
#define RTC_CNTL_CPUPERIOD_SEL_S 30
|
|
/* RTC_CNTL_CPUSEL_CONF : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: CPU sel option*/
|
|
#define RTC_CNTL_CPUSEL_CONF (BIT(29))
|
|
#define RTC_CNTL_CPUSEL_CONF_M (BIT(29))
|
|
#define RTC_CNTL_CPUSEL_CONF_V 0x1
|
|
#define RTC_CNTL_CPUSEL_CONF_S 29
|
|
|
|
#define RTC_CNTL_SDIO_ACT_CONF_REG (DR_REG_RTCCNTL_BASE + 0x6c)
|
|
/* RTC_CNTL_SDIO_ACT_DNUM : R/W ;bitpos:[31:22] ;default: 10'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_SDIO_ACT_DNUM 0x000003FF
|
|
#define RTC_CNTL_SDIO_ACT_DNUM_M ((RTC_CNTL_SDIO_ACT_DNUM_V)<<(RTC_CNTL_SDIO_ACT_DNUM_S))
|
|
#define RTC_CNTL_SDIO_ACT_DNUM_V 0x3FF
|
|
#define RTC_CNTL_SDIO_ACT_DNUM_S 22
|
|
|
|
#define RTC_CNTL_CLK_CONF_REG (DR_REG_RTCCNTL_BASE + 0x70)
|
|
/* RTC_CNTL_ANA_CLK_RTC_SEL : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
|
|
/*description: slow_clk_rtc sel. 0: SLOW_CK 1: CK_XTAL_32K 2: CK8M_D256_OUT*/
|
|
#define RTC_CNTL_ANA_CLK_RTC_SEL 0x00000003
|
|
#define RTC_CNTL_ANA_CLK_RTC_SEL_M ((RTC_CNTL_ANA_CLK_RTC_SEL_V)<<(RTC_CNTL_ANA_CLK_RTC_SEL_S))
|
|
#define RTC_CNTL_ANA_CLK_RTC_SEL_V 0x3
|
|
#define RTC_CNTL_ANA_CLK_RTC_SEL_S 30
|
|
/* RTC_CNTL_FAST_CLK_RTC_SEL : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: fast_clk_rtc sel. 0: XTAL div 4 1: CK8M*/
|
|
#define RTC_CNTL_FAST_CLK_RTC_SEL (BIT(29))
|
|
#define RTC_CNTL_FAST_CLK_RTC_SEL_M (BIT(29))
|
|
#define RTC_CNTL_FAST_CLK_RTC_SEL_V 0x1
|
|
#define RTC_CNTL_FAST_CLK_RTC_SEL_S 29
|
|
/* RTC_CNTL_SOC_CLK_SEL : R/W ;bitpos:[28:27] ;default: 2'd0 ; */
|
|
/*description: SOC clock sel. 0: XTAL 1: PLL 2: CK8M 3: APLL*/
|
|
#define RTC_CNTL_SOC_CLK_SEL 0x00000003
|
|
#define RTC_CNTL_SOC_CLK_SEL_M ((RTC_CNTL_SOC_CLK_SEL_V)<<(RTC_CNTL_SOC_CLK_SEL_S))
|
|
#define RTC_CNTL_SOC_CLK_SEL_V 0x3
|
|
#define RTC_CNTL_SOC_CLK_SEL_S 27
|
|
#define RTC_CNTL_SOC_CLK_SEL_XTL 0
|
|
#define RTC_CNTL_SOC_CLK_SEL_PLL 1
|
|
#define RTC_CNTL_SOC_CLK_SEL_8M 2
|
|
#define RTC_CNTL_SOC_CLK_SEL_APLL 3
|
|
/* RTC_CNTL_CK8M_FORCE_PU : R/W ;bitpos:[26] ;default: 1'd0 ; */
|
|
/*description: CK8M force power up*/
|
|
#define RTC_CNTL_CK8M_FORCE_PU (BIT(26))
|
|
#define RTC_CNTL_CK8M_FORCE_PU_M (BIT(26))
|
|
#define RTC_CNTL_CK8M_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_CK8M_FORCE_PU_S 26
|
|
/* RTC_CNTL_CK8M_FORCE_PD : R/W ;bitpos:[25] ;default: 1'd0 ; */
|
|
/*description: CK8M force power down*/
|
|
#define RTC_CNTL_CK8M_FORCE_PD (BIT(25))
|
|
#define RTC_CNTL_CK8M_FORCE_PD_M (BIT(25))
|
|
#define RTC_CNTL_CK8M_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_CK8M_FORCE_PD_S 25
|
|
/* RTC_CNTL_CK8M_DFREQ : R/W ;bitpos:[24:17] ;default: 8'd0 ; */
|
|
/*description: CK8M_DFREQ*/
|
|
#define RTC_CNTL_CK8M_DFREQ 0x000000FF
|
|
#define RTC_CNTL_CK8M_DFREQ_M ((RTC_CNTL_CK8M_DFREQ_V)<<(RTC_CNTL_CK8M_DFREQ_S))
|
|
#define RTC_CNTL_CK8M_DFREQ_V 0xFF
|
|
#define RTC_CNTL_CK8M_DFREQ_S 17
|
|
#define RTC_CNTL_CK8M_DFREQ_DEFAULT 172
|
|
/* RTC_CNTL_CK8M_FORCE_NOGATING : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: CK8M force no gating during sleep*/
|
|
#define RTC_CNTL_CK8M_FORCE_NOGATING (BIT(16))
|
|
#define RTC_CNTL_CK8M_FORCE_NOGATING_M (BIT(16))
|
|
#define RTC_CNTL_CK8M_FORCE_NOGATING_V 0x1
|
|
#define RTC_CNTL_CK8M_FORCE_NOGATING_S 16
|
|
/* RTC_CNTL_XTAL_FORCE_NOGATING : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: XTAL force no gating during sleep*/
|
|
#define RTC_CNTL_XTAL_FORCE_NOGATING (BIT(15))
|
|
#define RTC_CNTL_XTAL_FORCE_NOGATING_M (BIT(15))
|
|
#define RTC_CNTL_XTAL_FORCE_NOGATING_V 0x1
|
|
#define RTC_CNTL_XTAL_FORCE_NOGATING_S 15
|
|
/* RTC_CNTL_CK8M_DIV_SEL : R/W ;bitpos:[14:12] ;default: 3'd2 ; */
|
|
/*description: divider = reg_ck8m_div_sel + 1*/
|
|
#define RTC_CNTL_CK8M_DIV_SEL 0x00000007
|
|
#define RTC_CNTL_CK8M_DIV_SEL_M ((RTC_CNTL_CK8M_DIV_SEL_V)<<(RTC_CNTL_CK8M_DIV_SEL_S))
|
|
#define RTC_CNTL_CK8M_DIV_SEL_V 0x7
|
|
#define RTC_CNTL_CK8M_DIV_SEL_S 12
|
|
/* RTC_CNTL_CK8M_DFREQ_FORCE : R/W ;bitpos:[11] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_CK8M_DFREQ_FORCE (BIT(11))
|
|
#define RTC_CNTL_CK8M_DFREQ_FORCE_M (BIT(11))
|
|
#define RTC_CNTL_CK8M_DFREQ_FORCE_V 0x1
|
|
#define RTC_CNTL_CK8M_DFREQ_FORCE_S 11
|
|
/* RTC_CNTL_DIG_CLK8M_EN : R/W ;bitpos:[10] ;default: 1'd0 ; */
|
|
/*description: enable CK8M for digital core (no relationship with RTC core)*/
|
|
#define RTC_CNTL_DIG_CLK8M_EN (BIT(10))
|
|
#define RTC_CNTL_DIG_CLK8M_EN_M (BIT(10))
|
|
#define RTC_CNTL_DIG_CLK8M_EN_V 0x1
|
|
#define RTC_CNTL_DIG_CLK8M_EN_S 10
|
|
/* RTC_CNTL_DIG_CLK8M_D256_EN : R/W ;bitpos:[9] ;default: 1'd1 ; */
|
|
/*description: enable CK8M_D256_OUT for digital core (no relationship with RTC core)*/
|
|
#define RTC_CNTL_DIG_CLK8M_D256_EN (BIT(9))
|
|
#define RTC_CNTL_DIG_CLK8M_D256_EN_M (BIT(9))
|
|
#define RTC_CNTL_DIG_CLK8M_D256_EN_V 0x1
|
|
#define RTC_CNTL_DIG_CLK8M_D256_EN_S 9
|
|
/* RTC_CNTL_DIG_XTAL32K_EN : R/W ;bitpos:[8] ;default: 1'd0 ; */
|
|
/*description: enable CK_XTAL_32K for digital core (no relationship with RTC core)*/
|
|
#define RTC_CNTL_DIG_XTAL32K_EN (BIT(8))
|
|
#define RTC_CNTL_DIG_XTAL32K_EN_M (BIT(8))
|
|
#define RTC_CNTL_DIG_XTAL32K_EN_V 0x1
|
|
#define RTC_CNTL_DIG_XTAL32K_EN_S 8
|
|
/* RTC_CNTL_ENB_CK8M_DIV : R/W ;bitpos:[7] ;default: 1'd0 ; */
|
|
/*description: 1: CK8M_D256_OUT is actually CK8M 0: CK8M_D256_OUT is CK8M divided by 256*/
|
|
#define RTC_CNTL_ENB_CK8M_DIV (BIT(7))
|
|
#define RTC_CNTL_ENB_CK8M_DIV_M (BIT(7))
|
|
#define RTC_CNTL_ENB_CK8M_DIV_V 0x1
|
|
#define RTC_CNTL_ENB_CK8M_DIV_S 7
|
|
/* RTC_CNTL_ENB_CK8M : R/W ;bitpos:[6] ;default: 1'd0 ; */
|
|
/*description: disable CK8M and CK8M_D256_OUT*/
|
|
#define RTC_CNTL_ENB_CK8M (BIT(6))
|
|
#define RTC_CNTL_ENB_CK8M_M (BIT(6))
|
|
#define RTC_CNTL_ENB_CK8M_V 0x1
|
|
#define RTC_CNTL_ENB_CK8M_S 6
|
|
/* RTC_CNTL_CK8M_DIV : R/W ;bitpos:[5:4] ;default: 2'b01 ; */
|
|
/*description: CK8M_D256_OUT divider. 00: div128 01: div256 10: div512 11: div1024.*/
|
|
#define RTC_CNTL_CK8M_DIV 0x00000003
|
|
#define RTC_CNTL_CK8M_DIV_M ((RTC_CNTL_CK8M_DIV_V)<<(RTC_CNTL_CK8M_DIV_S))
|
|
#define RTC_CNTL_CK8M_DIV_V 0x3
|
|
#define RTC_CNTL_CK8M_DIV_S 4
|
|
|
|
#define RTC_CNTL_SDIO_CONF_REG (DR_REG_RTCCNTL_BASE + 0x74)
|
|
/* RTC_CNTL_XPD_SDIO_REG : R/W ;bitpos:[31] ;default: 1'd0 ; */
|
|
/*description: SW option for XPD_SDIO_REG. Only active when reg_sdio_force = 1*/
|
|
#define RTC_CNTL_XPD_SDIO_REG (BIT(31))
|
|
#define RTC_CNTL_XPD_SDIO_REG_M (BIT(31))
|
|
#define RTC_CNTL_XPD_SDIO_REG_V 0x1
|
|
#define RTC_CNTL_XPD_SDIO_REG_S 31
|
|
/* RTC_CNTL_DREFH_SDIO : R/W ;bitpos:[30:29] ;default: 2'b00 ; */
|
|
/*description: SW option for DREFH_SDIO. Only active when reg_sdio_force = 1*/
|
|
#define RTC_CNTL_DREFH_SDIO 0x00000003
|
|
#define RTC_CNTL_DREFH_SDIO_M ((RTC_CNTL_DREFH_SDIO_V)<<(RTC_CNTL_DREFH_SDIO_S))
|
|
#define RTC_CNTL_DREFH_SDIO_V 0x3
|
|
#define RTC_CNTL_DREFH_SDIO_S 29
|
|
/* RTC_CNTL_DREFM_SDIO : R/W ;bitpos:[28:27] ;default: 2'b00 ; */
|
|
/*description: SW option for DREFM_SDIO. Only active when reg_sdio_force = 1*/
|
|
#define RTC_CNTL_DREFM_SDIO 0x00000003
|
|
#define RTC_CNTL_DREFM_SDIO_M ((RTC_CNTL_DREFM_SDIO_V)<<(RTC_CNTL_DREFM_SDIO_S))
|
|
#define RTC_CNTL_DREFM_SDIO_V 0x3
|
|
#define RTC_CNTL_DREFM_SDIO_S 27
|
|
/* RTC_CNTL_DREFL_SDIO : R/W ;bitpos:[26:25] ;default: 2'b01 ; */
|
|
/*description: SW option for DREFL_SDIO. Only active when reg_sdio_force = 1*/
|
|
#define RTC_CNTL_DREFL_SDIO 0x00000003
|
|
#define RTC_CNTL_DREFL_SDIO_M ((RTC_CNTL_DREFL_SDIO_V)<<(RTC_CNTL_DREFL_SDIO_S))
|
|
#define RTC_CNTL_DREFL_SDIO_V 0x3
|
|
#define RTC_CNTL_DREFL_SDIO_S 25
|
|
/* RTC_CNTL_REG1P8_READY : RO ;bitpos:[24] ;default: 1'd0 ; */
|
|
/*description: read only register for REG1P8_READY*/
|
|
#define RTC_CNTL_REG1P8_READY (BIT(24))
|
|
#define RTC_CNTL_REG1P8_READY_M (BIT(24))
|
|
#define RTC_CNTL_REG1P8_READY_V 0x1
|
|
#define RTC_CNTL_REG1P8_READY_S 24
|
|
/* RTC_CNTL_SDIO_TIEH : R/W ;bitpos:[23] ;default: 1'd1 ; */
|
|
/*description: SW option for SDIO_TIEH. Only active when reg_sdio_force = 1*/
|
|
#define RTC_CNTL_SDIO_TIEH (BIT(23))
|
|
#define RTC_CNTL_SDIO_TIEH_M (BIT(23))
|
|
#define RTC_CNTL_SDIO_TIEH_V 0x1
|
|
#define RTC_CNTL_SDIO_TIEH_S 23
|
|
/* RTC_CNTL_SDIO_FORCE : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: 1: use SW option to control SDIO_REG 0: use state machine*/
|
|
#define RTC_CNTL_SDIO_FORCE (BIT(22))
|
|
#define RTC_CNTL_SDIO_FORCE_M (BIT(22))
|
|
#define RTC_CNTL_SDIO_FORCE_V 0x1
|
|
#define RTC_CNTL_SDIO_FORCE_S 22
|
|
/* RTC_CNTL_SDIO_PD_EN : R/W ;bitpos:[21] ;default: 1'd1 ; */
|
|
/*description: power down SDIO_REG in sleep. Only active when reg_sdio_force = 0*/
|
|
#define RTC_CNTL_SDIO_PD_EN (BIT(21))
|
|
#define RTC_CNTL_SDIO_PD_EN_M (BIT(21))
|
|
#define RTC_CNTL_SDIO_PD_EN_V 0x1
|
|
#define RTC_CNTL_SDIO_PD_EN_S 21
|
|
|
|
#define RTC_CNTL_BIAS_CONF_REG (DR_REG_RTCCNTL_BASE + 0x78)
|
|
/* RTC_CNTL_RST_BIAS_I2C : R/W ;bitpos:[31] ;default: 1'd0 ; */
|
|
/*description: RST_BIAS_I2C*/
|
|
#define RTC_CNTL_RST_BIAS_I2C (BIT(31))
|
|
#define RTC_CNTL_RST_BIAS_I2C_M (BIT(31))
|
|
#define RTC_CNTL_RST_BIAS_I2C_V 0x1
|
|
#define RTC_CNTL_RST_BIAS_I2C_S 31
|
|
/* RTC_CNTL_DEC_HEARTBEAT_WIDTH : R/W ;bitpos:[30] ;default: 1'd0 ; */
|
|
/*description: DEC_HEARTBEAT_WIDTH*/
|
|
#define RTC_CNTL_DEC_HEARTBEAT_WIDTH (BIT(30))
|
|
#define RTC_CNTL_DEC_HEARTBEAT_WIDTH_M (BIT(30))
|
|
#define RTC_CNTL_DEC_HEARTBEAT_WIDTH_V 0x1
|
|
#define RTC_CNTL_DEC_HEARTBEAT_WIDTH_S 30
|
|
/* RTC_CNTL_INC_HEARTBEAT_PERIOD : R/W ;bitpos:[29] ;default: 1'd0 ; */
|
|
/*description: INC_HEARTBEAT_PERIOD*/
|
|
#define RTC_CNTL_INC_HEARTBEAT_PERIOD (BIT(29))
|
|
#define RTC_CNTL_INC_HEARTBEAT_PERIOD_M (BIT(29))
|
|
#define RTC_CNTL_INC_HEARTBEAT_PERIOD_V 0x1
|
|
#define RTC_CNTL_INC_HEARTBEAT_PERIOD_S 29
|
|
/* RTC_CNTL_DEC_HEARTBEAT_PERIOD : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: DEC_HEARTBEAT_PERIOD*/
|
|
#define RTC_CNTL_DEC_HEARTBEAT_PERIOD (BIT(28))
|
|
#define RTC_CNTL_DEC_HEARTBEAT_PERIOD_M (BIT(28))
|
|
#define RTC_CNTL_DEC_HEARTBEAT_PERIOD_V 0x1
|
|
#define RTC_CNTL_DEC_HEARTBEAT_PERIOD_S 28
|
|
/* RTC_CNTL_INC_HEARTBEAT_REFRESH : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: INC_HEARTBEAT_REFRESH*/
|
|
#define RTC_CNTL_INC_HEARTBEAT_REFRESH (BIT(27))
|
|
#define RTC_CNTL_INC_HEARTBEAT_REFRESH_M (BIT(27))
|
|
#define RTC_CNTL_INC_HEARTBEAT_REFRESH_V 0x1
|
|
#define RTC_CNTL_INC_HEARTBEAT_REFRESH_S 27
|
|
/* RTC_CNTL_ENB_SCK_XTAL : R/W ;bitpos:[26] ;default: 1'd0 ; */
|
|
/*description: ENB_SCK_XTAL*/
|
|
#define RTC_CNTL_ENB_SCK_XTAL (BIT(26))
|
|
#define RTC_CNTL_ENB_SCK_XTAL_M (BIT(26))
|
|
#define RTC_CNTL_ENB_SCK_XTAL_V 0x1
|
|
#define RTC_CNTL_ENB_SCK_XTAL_S 26
|
|
/* RTC_CNTL_DBG_ATTEN : R/W ;bitpos:[25:24] ;default: 2'b00 ; */
|
|
/*description: DBG_ATTEN*/
|
|
#define RTC_CNTL_DBG_ATTEN 0x00000003
|
|
#define RTC_CNTL_DBG_ATTEN_M ((RTC_CNTL_DBG_ATTEN_V)<<(RTC_CNTL_DBG_ATTEN_S))
|
|
#define RTC_CNTL_DBG_ATTEN_V 0x3
|
|
#define RTC_CNTL_DBG_ATTEN_S 24
|
|
#define RTC_CNTL_DBG_ATTEN_DEFAULT 3
|
|
#define RTC_CNTL_REG (DR_REG_RTCCNTL_BASE + 0x7c)
|
|
/* RTC_CNTL_FORCE_PU : R/W ;bitpos:[31] ;default: 1'd1 ; */
|
|
/*description: RTC_REG force power up*/
|
|
#define RTC_CNTL_FORCE_PU (BIT(31))
|
|
#define RTC_CNTL_FORCE_PU_M (BIT(31))
|
|
#define RTC_CNTL_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_FORCE_PU_S 31
|
|
/* RTC_CNTL_FORCE_PD : R/W ;bitpos:[30] ;default: 1'd0 ; */
|
|
/*description: RTC_REG force power down (for RTC_REG power down means decrease
|
|
the voltage to 0.8v or lower )*/
|
|
#define RTC_CNTL_FORCE_PD (BIT(30))
|
|
#define RTC_CNTL_FORCE_PD_M (BIT(30))
|
|
#define RTC_CNTL_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_FORCE_PD_S 30
|
|
/* RTC_CNTL_DBOOST_FORCE_PU : R/W ;bitpos:[29] ;default: 1'd1 ; */
|
|
/*description: RTC_DBOOST force power up*/
|
|
#define RTC_CNTL_DBOOST_FORCE_PU (BIT(29))
|
|
#define RTC_CNTL_DBOOST_FORCE_PU_M (BIT(29))
|
|
#define RTC_CNTL_DBOOST_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_DBOOST_FORCE_PU_S 29
|
|
/* RTC_CNTL_DBOOST_FORCE_PD : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RTC_DBOOST force power down*/
|
|
#define RTC_CNTL_DBOOST_FORCE_PD (BIT(28))
|
|
#define RTC_CNTL_DBOOST_FORCE_PD_M (BIT(28))
|
|
#define RTC_CNTL_DBOOST_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_DBOOST_FORCE_PD_S 28
|
|
/* RTC_CNTL_DBIAS_WAK : R/W ;bitpos:[27:25] ;default: 3'd4 ; */
|
|
/*description: RTC_DBIAS during wakeup*/
|
|
#define RTC_CNTL_DBIAS_WAK 0x00000007
|
|
#define RTC_CNTL_DBIAS_WAK_M ((RTC_CNTL_DBIAS_WAK_V)<<(RTC_CNTL_DBIAS_WAK_S))
|
|
#define RTC_CNTL_DBIAS_WAK_V 0x7
|
|
#define RTC_CNTL_DBIAS_WAK_S 25
|
|
/* RTC_CNTL_DBIAS_SLP : R/W ;bitpos:[24:22] ;default: 3'd4 ; */
|
|
/*description: RTC_DBIAS during sleep*/
|
|
#define RTC_CNTL_DBIAS_SLP 0x00000007
|
|
#define RTC_CNTL_DBIAS_SLP_M ((RTC_CNTL_DBIAS_SLP_V)<<(RTC_CNTL_DBIAS_SLP_S))
|
|
#define RTC_CNTL_DBIAS_SLP_V 0x7
|
|
#define RTC_CNTL_DBIAS_SLP_S 22
|
|
/* RTC_CNTL_SCK_DCAP : R/W ;bitpos:[21:14] ;default: 8'd0 ; */
|
|
/*description: SCK_DCAP*/
|
|
#define RTC_CNTL_SCK_DCAP 0x000000FF
|
|
#define RTC_CNTL_SCK_DCAP_M ((RTC_CNTL_SCK_DCAP_V)<<(RTC_CNTL_SCK_DCAP_S))
|
|
#define RTC_CNTL_SCK_DCAP_V 0xFF
|
|
#define RTC_CNTL_SCK_DCAP_S 14
|
|
#define RTC_CNTL_SCK_DCAP_DEFAULT 255
|
|
/* RTC_CNTL_DIG_DBIAS_WAK : R/W ;bitpos:[13:11] ;default: 3'd4 ; */
|
|
/*description: DIG_REG_DBIAS during wakeup*/
|
|
#define RTC_CNTL_DIG_DBIAS_WAK 0x00000007
|
|
#define RTC_CNTL_DIG_DBIAS_WAK_M ((RTC_CNTL_DIG_DBIAS_WAK_V)<<(RTC_CNTL_DIG_DBIAS_WAK_S))
|
|
#define RTC_CNTL_DIG_DBIAS_WAK_V 0x7
|
|
#define RTC_CNTL_DIG_DBIAS_WAK_S 11
|
|
/* RTC_CNTL_DIG_DBIAS_SLP : R/W ;bitpos:[10:8] ;default: 3'd4 ; */
|
|
/*description: DIG_REG_DBIAS during sleep*/
|
|
#define RTC_CNTL_DIG_DBIAS_SLP 0x00000007
|
|
#define RTC_CNTL_DIG_DBIAS_SLP_M ((RTC_CNTL_DIG_DBIAS_SLP_V)<<(RTC_CNTL_DIG_DBIAS_SLP_S))
|
|
#define RTC_CNTL_DIG_DBIAS_SLP_V 0x7
|
|
#define RTC_CNTL_DIG_DBIAS_SLP_S 8
|
|
/* RTC_CNTL_SCK_DCAP_FORCE : R/W ;bitpos:[7] ;default: 1'd0 ; */
|
|
/*description: N/A*/
|
|
#define RTC_CNTL_SCK_DCAP_FORCE (BIT(7))
|
|
#define RTC_CNTL_SCK_DCAP_FORCE_M (BIT(7))
|
|
#define RTC_CNTL_SCK_DCAP_FORCE_V 0x1
|
|
#define RTC_CNTL_SCK_DCAP_FORCE_S 7
|
|
|
|
/* Approximate mapping of voltages to RTC_CNTL_DBIAS_WAK, RTC_CNTL_DBIAS_SLP,
|
|
* RTC_CNTL_DIG_DBIAS_WAK, RTC_CNTL_DIG_DBIAS_SLP values.
|
|
* Valid if RTC_CNTL_DBG_ATTEN is 0.
|
|
*/
|
|
#define RTC_CNTL_DBIAS_0V90 0
|
|
#define RTC_CNTL_DBIAS_0V95 1
|
|
#define RTC_CNTL_DBIAS_1V00 2
|
|
#define RTC_CNTL_DBIAS_1V05 3
|
|
#define RTC_CNTL_DBIAS_1V10 4
|
|
#define RTC_CNTL_DBIAS_1V15 5
|
|
#define RTC_CNTL_DBIAS_1V20 6
|
|
#define RTC_CNTL_DBIAS_1V25 7
|
|
|
|
#define RTC_CNTL_PWC_REG (DR_REG_RTCCNTL_BASE + 0x80)
|
|
/* RTC_CNTL_PD_EN : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: enable power down rtc_peri in sleep*/
|
|
#define RTC_CNTL_PD_EN (BIT(20))
|
|
#define RTC_CNTL_PD_EN_M (BIT(20))
|
|
#define RTC_CNTL_PD_EN_V 0x1
|
|
#define RTC_CNTL_PD_EN_S 20
|
|
/* RTC_CNTL_FORCE_PU : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: rtc_peri force power up*/
|
|
#define RTC_CNTL_PWC_FORCE_PU (BIT(19))
|
|
#define RTC_CNTL_PWC_FORCE_PU_M (BIT(19))
|
|
#define RTC_CNTL_PWC_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_PWC_FORCE_PU_S 19
|
|
/* RTC_CNTL_FORCE_PD : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: rtc_peri force power down*/
|
|
#define RTC_CNTL_PWC_FORCE_PD (BIT(18))
|
|
#define RTC_CNTL_PWC_FORCE_PD_M (BIT(18))
|
|
#define RTC_CNTL_PWC_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_PWC_FORCE_PD_S 18
|
|
/* RTC_CNTL_SLOWMEM_PD_EN : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: enable power down RTC memory in sleep*/
|
|
#define RTC_CNTL_SLOWMEM_PD_EN (BIT(17))
|
|
#define RTC_CNTL_SLOWMEM_PD_EN_M (BIT(17))
|
|
#define RTC_CNTL_SLOWMEM_PD_EN_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_PD_EN_S 17
|
|
/* RTC_CNTL_SLOWMEM_FORCE_PU : R/W ;bitpos:[16] ;default: 1'b1 ; */
|
|
/*description: RTC memory force power up*/
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PU (BIT(16))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PU_M (BIT(16))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PU_S 16
|
|
/* RTC_CNTL_SLOWMEM_FORCE_PD : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: RTC memory force power down*/
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PD (BIT(15))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PD_M (BIT(15))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FORCE_PD_S 15
|
|
/* RTC_CNTL_FASTMEM_PD_EN : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: enable power down fast RTC memory in sleep*/
|
|
#define RTC_CNTL_FASTMEM_PD_EN (BIT(14))
|
|
#define RTC_CNTL_FASTMEM_PD_EN_M (BIT(14))
|
|
#define RTC_CNTL_FASTMEM_PD_EN_V 0x1
|
|
#define RTC_CNTL_FASTMEM_PD_EN_S 14
|
|
/* RTC_CNTL_FASTMEM_FORCE_PU : R/W ;bitpos:[13] ;default: 1'b1 ; */
|
|
/*description: Fast RTC memory force power up*/
|
|
#define RTC_CNTL_FASTMEM_FORCE_PU (BIT(13))
|
|
#define RTC_CNTL_FASTMEM_FORCE_PU_M (BIT(13))
|
|
#define RTC_CNTL_FASTMEM_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FORCE_PU_S 13
|
|
/* RTC_CNTL_FASTMEM_FORCE_PD : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: Fast RTC memory force power down*/
|
|
#define RTC_CNTL_FASTMEM_FORCE_PD (BIT(12))
|
|
#define RTC_CNTL_FASTMEM_FORCE_PD_M (BIT(12))
|
|
#define RTC_CNTL_FASTMEM_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FORCE_PD_S 12
|
|
/* RTC_CNTL_SLOWMEM_FORCE_LPU : R/W ;bitpos:[11] ;default: 1'b1 ; */
|
|
/*description: RTC memory force no PD*/
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPU (BIT(11))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPU_M (BIT(11))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPU_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPU_S 11
|
|
/* RTC_CNTL_SLOWMEM_FORCE_LPD : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: RTC memory force PD*/
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPD (BIT(10))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPD_M (BIT(10))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPD_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FORCE_LPD_S 10
|
|
/* RTC_CNTL_SLOWMEM_FOLW_CPU : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: 1: RTC memory PD following CPU 0: RTC memory PD following RTC state machine*/
|
|
#define RTC_CNTL_SLOWMEM_FOLW_CPU (BIT(9))
|
|
#define RTC_CNTL_SLOWMEM_FOLW_CPU_M (BIT(9))
|
|
#define RTC_CNTL_SLOWMEM_FOLW_CPU_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FOLW_CPU_S 9
|
|
/* RTC_CNTL_FASTMEM_FORCE_LPU : R/W ;bitpos:[8] ;default: 1'b1 ; */
|
|
/*description: Fast RTC memory force no PD*/
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPU (BIT(8))
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPU_M (BIT(8))
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPU_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPU_S 8
|
|
/* RTC_CNTL_FASTMEM_FORCE_LPD : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: Fast RTC memory force PD*/
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPD (BIT(7))
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPD_M (BIT(7))
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPD_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FORCE_LPD_S 7
|
|
/* RTC_CNTL_FASTMEM_FOLW_CPU : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: 1: Fast RTC memory PD following CPU 0: fast RTC memory PD following
|
|
RTC state machine*/
|
|
#define RTC_CNTL_FASTMEM_FOLW_CPU (BIT(6))
|
|
#define RTC_CNTL_FASTMEM_FOLW_CPU_M (BIT(6))
|
|
#define RTC_CNTL_FASTMEM_FOLW_CPU_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FOLW_CPU_S 6
|
|
/* RTC_CNTL_FORCE_NOISO : R/W ;bitpos:[5] ;default: 1'd1 ; */
|
|
/*description: rtc_peri force no ISO*/
|
|
#define RTC_CNTL_FORCE_NOISO (BIT(5))
|
|
#define RTC_CNTL_FORCE_NOISO_M (BIT(5))
|
|
#define RTC_CNTL_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_FORCE_NOISO_S 5
|
|
/* RTC_CNTL_FORCE_ISO : R/W ;bitpos:[4] ;default: 1'd0 ; */
|
|
/*description: rtc_peri force ISO*/
|
|
#define RTC_CNTL_FORCE_ISO (BIT(4))
|
|
#define RTC_CNTL_FORCE_ISO_M (BIT(4))
|
|
#define RTC_CNTL_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_FORCE_ISO_S 4
|
|
/* RTC_CNTL_SLOWMEM_FORCE_ISO : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: RTC memory force ISO*/
|
|
#define RTC_CNTL_SLOWMEM_FORCE_ISO (BIT(3))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_ISO_M (BIT(3))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FORCE_ISO_S 3
|
|
/* RTC_CNTL_SLOWMEM_FORCE_NOISO : R/W ;bitpos:[2] ;default: 1'b1 ; */
|
|
/*description: RTC memory force no ISO*/
|
|
#define RTC_CNTL_SLOWMEM_FORCE_NOISO (BIT(2))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_NOISO_M (BIT(2))
|
|
#define RTC_CNTL_SLOWMEM_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_SLOWMEM_FORCE_NOISO_S 2
|
|
/* RTC_CNTL_FASTMEM_FORCE_ISO : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: Fast RTC memory force ISO*/
|
|
#define RTC_CNTL_FASTMEM_FORCE_ISO (BIT(1))
|
|
#define RTC_CNTL_FASTMEM_FORCE_ISO_M (BIT(1))
|
|
#define RTC_CNTL_FASTMEM_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FORCE_ISO_S 1
|
|
/* RTC_CNTL_FASTMEM_FORCE_NOISO : R/W ;bitpos:[0] ;default: 1'b1 ; */
|
|
/*description: Fast RTC memory force no ISO*/
|
|
#define RTC_CNTL_FASTMEM_FORCE_NOISO (BIT(0))
|
|
#define RTC_CNTL_FASTMEM_FORCE_NOISO_M (BIT(0))
|
|
#define RTC_CNTL_FASTMEM_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_FASTMEM_FORCE_NOISO_S 0
|
|
|
|
/* Useful groups of RTC_CNTL_PWC_REG bits */
|
|
#define RTC_CNTL_MEM_FORCE_ISO \
|
|
(RTC_CNTL_SLOWMEM_FORCE_ISO | RTC_CNTL_FASTMEM_FORCE_ISO)
|
|
#define RTC_CNTL_MEM_FORCE_NOISO \
|
|
(RTC_CNTL_SLOWMEM_FORCE_NOISO | RTC_CNTL_FASTMEM_FORCE_NOISO)
|
|
#define RTC_CNTL_MEM_PD_EN \
|
|
(RTC_CNTL_SLOWMEM_PD_EN | RTC_CNTL_FASTMEM_PD_EN)
|
|
#define RTC_CNTL_MEM_FORCE_PU \
|
|
(RTC_CNTL_SLOWMEM_FORCE_PU | RTC_CNTL_FASTMEM_FORCE_PU)
|
|
#define RTC_CNTL_MEM_FORCE_PD \
|
|
(RTC_CNTL_SLOWMEM_FORCE_PD | RTC_CNTL_FASTMEM_FORCE_PD)
|
|
#define RTC_CNTL_MEM_FOLW_CPU \
|
|
(RTC_CNTL_SLOWMEM_FOLW_CPU | RTC_CNTL_FASTMEM_FOLW_CPU)
|
|
#define RTC_CNTL_MEM_FORCE_LPU \
|
|
(RTC_CNTL_SLOWMEM_FORCE_LPU | RTC_CNTL_FASTMEM_FORCE_LPU)
|
|
#define RTC_CNTL_MEM_FORCE_LPD \
|
|
(RTC_CNTL_SLOWMEM_FORCE_LPD | RTC_CNTL_FASTMEM_FORCE_LPD)
|
|
|
|
#define RTC_CNTL_DIG_PWC_REG (DR_REG_RTCCNTL_BASE + 0x84)
|
|
/* RTC_CNTL_DG_WRAP_PD_EN : R/W ;bitpos:[31] ;default: 0 ; */
|
|
/*description: enable power down digital core in sleep*/
|
|
#define RTC_CNTL_DG_WRAP_PD_EN (BIT(31))
|
|
#define RTC_CNTL_DG_WRAP_PD_EN_M (BIT(31))
|
|
#define RTC_CNTL_DG_WRAP_PD_EN_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_PD_EN_S 31
|
|
/* RTC_CNTL_WIFI_PD_EN : R/W ;bitpos:[30] ;default: 0 ; */
|
|
/*description: enable power down wifi in sleep*/
|
|
#define RTC_CNTL_WIFI_PD_EN (BIT(30))
|
|
#define RTC_CNTL_WIFI_PD_EN_M (BIT(30))
|
|
#define RTC_CNTL_WIFI_PD_EN_V 0x1
|
|
#define RTC_CNTL_WIFI_PD_EN_S 30
|
|
/* RTC_CNTL_INTER_RAM4_PD_EN : R/W ;bitpos:[29] ;default: 0 ; */
|
|
/*description: enable power down internal SRAM 4 in sleep*/
|
|
#define RTC_CNTL_INTER_RAM4_PD_EN (BIT(29))
|
|
#define RTC_CNTL_INTER_RAM4_PD_EN_M (BIT(29))
|
|
#define RTC_CNTL_INTER_RAM4_PD_EN_V 0x1
|
|
#define RTC_CNTL_INTER_RAM4_PD_EN_S 29
|
|
/* RTC_CNTL_INTER_RAM3_PD_EN : R/W ;bitpos:[28] ;default: 0 ; */
|
|
/*description: enable power down internal SRAM 3 in sleep*/
|
|
#define RTC_CNTL_INTER_RAM3_PD_EN (BIT(28))
|
|
#define RTC_CNTL_INTER_RAM3_PD_EN_M (BIT(28))
|
|
#define RTC_CNTL_INTER_RAM3_PD_EN_V 0x1
|
|
#define RTC_CNTL_INTER_RAM3_PD_EN_S 28
|
|
/* RTC_CNTL_INTER_RAM2_PD_EN : R/W ;bitpos:[27] ;default: 0 ; */
|
|
/*description: enable power down internal SRAM 2 in sleep*/
|
|
#define RTC_CNTL_INTER_RAM2_PD_EN (BIT(27))
|
|
#define RTC_CNTL_INTER_RAM2_PD_EN_M (BIT(27))
|
|
#define RTC_CNTL_INTER_RAM2_PD_EN_V 0x1
|
|
#define RTC_CNTL_INTER_RAM2_PD_EN_S 27
|
|
/* RTC_CNTL_INTER_RAM1_PD_EN : R/W ;bitpos:[26] ;default: 0 ; */
|
|
/*description: enable power down internal SRAM 1 in sleep*/
|
|
#define RTC_CNTL_INTER_RAM1_PD_EN (BIT(26))
|
|
#define RTC_CNTL_INTER_RAM1_PD_EN_M (BIT(26))
|
|
#define RTC_CNTL_INTER_RAM1_PD_EN_V 0x1
|
|
#define RTC_CNTL_INTER_RAM1_PD_EN_S 26
|
|
/* RTC_CNTL_INTER_RAM0_PD_EN : R/W ;bitpos:[25] ;default: 0 ; */
|
|
/*description: enable power down internal SRAM 0 in sleep*/
|
|
#define RTC_CNTL_INTER_RAM0_PD_EN (BIT(25))
|
|
#define RTC_CNTL_INTER_RAM0_PD_EN_M (BIT(25))
|
|
#define RTC_CNTL_INTER_RAM0_PD_EN_V 0x1
|
|
#define RTC_CNTL_INTER_RAM0_PD_EN_S 25
|
|
/* RTC_CNTL_ROM0_PD_EN : R/W ;bitpos:[24] ;default: 0 ; */
|
|
/*description: enable power down ROM in sleep*/
|
|
#define RTC_CNTL_ROM0_PD_EN (BIT(24))
|
|
#define RTC_CNTL_ROM0_PD_EN_M (BIT(24))
|
|
#define RTC_CNTL_ROM0_PD_EN_V 0x1
|
|
#define RTC_CNTL_ROM0_PD_EN_S 24
|
|
/* RTC_CNTL_DG_WRAP_FORCE_PU : R/W ;bitpos:[20] ;default: 1'd1 ; */
|
|
/*description: digital core force power up*/
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PU (BIT(20))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PU_M (BIT(20))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PU_S 20
|
|
/* RTC_CNTL_DG_WRAP_FORCE_PD : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
/*description: digital core force power down*/
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PD (BIT(19))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PD_M (BIT(19))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_FORCE_PD_S 19
|
|
/* RTC_CNTL_WIFI_FORCE_PU : R/W ;bitpos:[18] ;default: 1'd1 ; */
|
|
/*description: wifi force power up*/
|
|
#define RTC_CNTL_WIFI_FORCE_PU (BIT(18))
|
|
#define RTC_CNTL_WIFI_FORCE_PU_M (BIT(18))
|
|
#define RTC_CNTL_WIFI_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_WIFI_FORCE_PU_S 18
|
|
/* RTC_CNTL_WIFI_FORCE_PD : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: wifi force power down*/
|
|
#define RTC_CNTL_WIFI_FORCE_PD (BIT(17))
|
|
#define RTC_CNTL_WIFI_FORCE_PD_M (BIT(17))
|
|
#define RTC_CNTL_WIFI_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_WIFI_FORCE_PD_S 17
|
|
/* RTC_CNTL_INTER_RAM4_FORCE_PU : R/W ;bitpos:[16] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 4 force power up*/
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PU (BIT(16))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PU_M (BIT(16))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PU_S 16
|
|
/* RTC_CNTL_INTER_RAM4_FORCE_PD : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: internal SRAM 4 force power down*/
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PD (BIT(15))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PD_M (BIT(15))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_PD_S 15
|
|
/* RTC_CNTL_INTER_RAM3_FORCE_PU : R/W ;bitpos:[14] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 3 force power up*/
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PU (BIT(14))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PU_M (BIT(14))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PU_S 14
|
|
/* RTC_CNTL_INTER_RAM3_FORCE_PD : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: internal SRAM 3 force power down*/
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PD (BIT(13))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PD_M (BIT(13))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_PD_S 13
|
|
/* RTC_CNTL_INTER_RAM2_FORCE_PU : R/W ;bitpos:[12] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 2 force power up*/
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PU (BIT(12))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PU_M (BIT(12))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PU_S 12
|
|
/* RTC_CNTL_INTER_RAM2_FORCE_PD : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: internal SRAM 2 force power down*/
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PD (BIT(11))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PD_M (BIT(11))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_PD_S 11
|
|
/* RTC_CNTL_INTER_RAM1_FORCE_PU : R/W ;bitpos:[10] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 1 force power up*/
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PU (BIT(10))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PU_M (BIT(10))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PU_S 10
|
|
/* RTC_CNTL_INTER_RAM1_FORCE_PD : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: internal SRAM 1 force power down*/
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PD (BIT(9))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PD_M (BIT(9))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_PD_S 9
|
|
/* RTC_CNTL_INTER_RAM0_FORCE_PU : R/W ;bitpos:[8] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 0 force power up*/
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PU (BIT(8))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PU_M (BIT(8))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PU_S 8
|
|
/* RTC_CNTL_INTER_RAM0_FORCE_PD : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: internal SRAM 0 force power down*/
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PD (BIT(7))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PD_M (BIT(7))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_PD_S 7
|
|
/* RTC_CNTL_ROM0_FORCE_PU : R/W ;bitpos:[6] ;default: 1'd1 ; */
|
|
/*description: ROM force power up*/
|
|
#define RTC_CNTL_ROM0_FORCE_PU (BIT(6))
|
|
#define RTC_CNTL_ROM0_FORCE_PU_M (BIT(6))
|
|
#define RTC_CNTL_ROM0_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_ROM0_FORCE_PU_S 6
|
|
/* RTC_CNTL_ROM0_FORCE_PD : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: ROM force power down*/
|
|
#define RTC_CNTL_ROM0_FORCE_PD (BIT(5))
|
|
#define RTC_CNTL_ROM0_FORCE_PD_M (BIT(5))
|
|
#define RTC_CNTL_ROM0_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_ROM0_FORCE_PD_S 5
|
|
/* RTC_CNTL_LSLP_MEM_FORCE_PU : R/W ;bitpos:[4] ;default: 1'b1 ; */
|
|
/*description: memories in digital core force no PD in sleep*/
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PU (BIT(4))
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PU_M (BIT(4))
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PU_V 0x1
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PU_S 4
|
|
/* RTC_CNTL_LSLP_MEM_FORCE_PD : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: memories in digital core force PD in sleep*/
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PD (BIT(3))
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PD_M (BIT(3))
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PD_V 0x1
|
|
#define RTC_CNTL_LSLP_MEM_FORCE_PD_S 3
|
|
|
|
/* Useful groups of RTC_CNTL_DIG_PWC_REG bits */
|
|
#define RTC_CNTL_CPU_ROM_RAM_PD_EN \
|
|
(RTC_CNTL_INTER_RAM4_PD_EN | RTC_CNTL_INTER_RAM3_PD_EN |\
|
|
RTC_CNTL_INTER_RAM2_PD_EN | RTC_CNTL_INTER_RAM1_PD_EN |\
|
|
RTC_CNTL_INTER_RAM0_PD_EN | RTC_CNTL_ROM0_PD_EN)
|
|
#define RTC_CNTL_CPU_ROM_RAM_FORCE_PU \
|
|
(RTC_CNTL_INTER_RAM4_FORCE_PU | RTC_CNTL_INTER_RAM3_FORCE_PU |\
|
|
RTC_CNTL_INTER_RAM2_FORCE_PU | RTC_CNTL_INTER_RAM1_FORCE_PU |\
|
|
RTC_CNTL_INTER_RAM0_FORCE_PU | RTC_CNTL_ROM0_FORCE_PU)
|
|
#define RTC_CNTL_CPU_ROM_RAM_FORCE_PD \
|
|
(RTC_CNTL_INTER_RAM4_FORCE_PD | RTC_CNTL_INTER_RAM3_FORCE_PD |\
|
|
RTC_CNTL_INTER_RAM2_FORCE_PD | RTC_CNTL_INTER_RAM1_FORCE_PD |\
|
|
RTC_CNTL_INTER_RAM0_FORCE_PD | RTC_CNTL_ROM0_FORCE_PD
|
|
|
|
#define RTC_CNTL_DIG_ISO_REG (DR_REG_RTCCNTL_BASE + 0x88)
|
|
/* RTC_CNTL_DG_WRAP_FORCE_NOISO : R/W ;bitpos:[31] ;default: 1'd1 ; */
|
|
/*description: digital core force no ISO*/
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NOISO (BIT(31))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NOISO_M (BIT(31))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_FORCE_NOISO_S 31
|
|
/* RTC_CNTL_DG_WRAP_FORCE_ISO : R/W ;bitpos:[30] ;default: 1'd0 ; */
|
|
/*description: digital core force ISO*/
|
|
#define RTC_CNTL_DG_WRAP_FORCE_ISO (BIT(30))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_ISO_M (BIT(30))
|
|
#define RTC_CNTL_DG_WRAP_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_DG_WRAP_FORCE_ISO_S 30
|
|
/* RTC_CNTL_WIFI_FORCE_NOISO : R/W ;bitpos:[29] ;default: 1'd1 ; */
|
|
/*description: wifi force no ISO*/
|
|
#define RTC_CNTL_WIFI_FORCE_NOISO (BIT(29))
|
|
#define RTC_CNTL_WIFI_FORCE_NOISO_M (BIT(29))
|
|
#define RTC_CNTL_WIFI_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_WIFI_FORCE_NOISO_S 29
|
|
/* RTC_CNTL_WIFI_FORCE_ISO : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: wifi force ISO*/
|
|
#define RTC_CNTL_WIFI_FORCE_ISO (BIT(28))
|
|
#define RTC_CNTL_WIFI_FORCE_ISO_M (BIT(28))
|
|
#define RTC_CNTL_WIFI_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_WIFI_FORCE_ISO_S 28
|
|
/* RTC_CNTL_INTER_RAM4_FORCE_NOISO : R/W ;bitpos:[27] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 4 force no ISO*/
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_NOISO (BIT(27))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_NOISO_M (BIT(27))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_NOISO_S 27
|
|
/* RTC_CNTL_INTER_RAM4_FORCE_ISO : R/W ;bitpos:[26] ;default: 1'd0 ; */
|
|
/*description: internal SRAM 4 force ISO*/
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_ISO (BIT(26))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_ISO_M (BIT(26))
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM4_FORCE_ISO_S 26
|
|
/* RTC_CNTL_INTER_RAM3_FORCE_NOISO : R/W ;bitpos:[25] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 3 force no ISO*/
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_NOISO (BIT(25))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_NOISO_M (BIT(25))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_NOISO_S 25
|
|
/* RTC_CNTL_INTER_RAM3_FORCE_ISO : R/W ;bitpos:[24] ;default: 1'd0 ; */
|
|
/*description: internal SRAM 3 force ISO*/
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_ISO (BIT(24))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_ISO_M (BIT(24))
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM3_FORCE_ISO_S 24
|
|
/* RTC_CNTL_INTER_RAM2_FORCE_NOISO : R/W ;bitpos:[23] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 2 force no ISO*/
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_NOISO (BIT(23))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_NOISO_M (BIT(23))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_NOISO_S 23
|
|
/* RTC_CNTL_INTER_RAM2_FORCE_ISO : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: internal SRAM 2 force ISO*/
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_ISO (BIT(22))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_ISO_M (BIT(22))
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM2_FORCE_ISO_S 22
|
|
/* RTC_CNTL_INTER_RAM1_FORCE_NOISO : R/W ;bitpos:[21] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 1 force no ISO*/
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_NOISO (BIT(21))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_NOISO_M (BIT(21))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_NOISO_S 21
|
|
/* RTC_CNTL_INTER_RAM1_FORCE_ISO : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: internal SRAM 1 force ISO*/
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_ISO (BIT(20))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_ISO_M (BIT(20))
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM1_FORCE_ISO_S 20
|
|
/* RTC_CNTL_INTER_RAM0_FORCE_NOISO : R/W ;bitpos:[19] ;default: 1'd1 ; */
|
|
/*description: internal SRAM 0 force no ISO*/
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_NOISO (BIT(19))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_NOISO_M (BIT(19))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_NOISO_S 19
|
|
/* RTC_CNTL_INTER_RAM0_FORCE_ISO : R/W ;bitpos:[18] ;default: 1'd0 ; */
|
|
/*description: internal SRAM 0 force ISO*/
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_ISO (BIT(18))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_ISO_M (BIT(18))
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_INTER_RAM0_FORCE_ISO_S 18
|
|
/* RTC_CNTL_ROM0_FORCE_NOISO : R/W ;bitpos:[17] ;default: 1'd1 ; */
|
|
/*description: ROM force no ISO*/
|
|
#define RTC_CNTL_ROM0_FORCE_NOISO (BIT(17))
|
|
#define RTC_CNTL_ROM0_FORCE_NOISO_M (BIT(17))
|
|
#define RTC_CNTL_ROM0_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_ROM0_FORCE_NOISO_S 17
|
|
/* RTC_CNTL_ROM0_FORCE_ISO : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: ROM force ISO*/
|
|
#define RTC_CNTL_ROM0_FORCE_ISO (BIT(16))
|
|
#define RTC_CNTL_ROM0_FORCE_ISO_M (BIT(16))
|
|
#define RTC_CNTL_ROM0_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_ROM0_FORCE_ISO_S 16
|
|
/* RTC_CNTL_DG_PAD_FORCE_HOLD : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: digital pad force hold*/
|
|
#define RTC_CNTL_DG_PAD_FORCE_HOLD (BIT(15))
|
|
#define RTC_CNTL_DG_PAD_FORCE_HOLD_M (BIT(15))
|
|
#define RTC_CNTL_DG_PAD_FORCE_HOLD_V 0x1
|
|
#define RTC_CNTL_DG_PAD_FORCE_HOLD_S 15
|
|
/* RTC_CNTL_DG_PAD_FORCE_UNHOLD : R/W ;bitpos:[14] ;default: 1'd1 ; */
|
|
/*description: digital pad force un-hold*/
|
|
#define RTC_CNTL_DG_PAD_FORCE_UNHOLD (BIT(14))
|
|
#define RTC_CNTL_DG_PAD_FORCE_UNHOLD_M (BIT(14))
|
|
#define RTC_CNTL_DG_PAD_FORCE_UNHOLD_V 0x1
|
|
#define RTC_CNTL_DG_PAD_FORCE_UNHOLD_S 14
|
|
/* RTC_CNTL_DG_PAD_FORCE_ISO : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: digital pad force ISO*/
|
|
#define RTC_CNTL_DG_PAD_FORCE_ISO (BIT(13))
|
|
#define RTC_CNTL_DG_PAD_FORCE_ISO_M (BIT(13))
|
|
#define RTC_CNTL_DG_PAD_FORCE_ISO_V 0x1
|
|
#define RTC_CNTL_DG_PAD_FORCE_ISO_S 13
|
|
/* RTC_CNTL_DG_PAD_FORCE_NOISO : R/W ;bitpos:[12] ;default: 1'd1 ; */
|
|
/*description: digital pad force no ISO*/
|
|
#define RTC_CNTL_DG_PAD_FORCE_NOISO (BIT(12))
|
|
#define RTC_CNTL_DG_PAD_FORCE_NOISO_M (BIT(12))
|
|
#define RTC_CNTL_DG_PAD_FORCE_NOISO_V 0x1
|
|
#define RTC_CNTL_DG_PAD_FORCE_NOISO_S 12
|
|
/* RTC_CNTL_DG_PAD_AUTOHOLD_EN : R/W ;bitpos:[11] ;default: 1'd0 ; */
|
|
/*description: digital pad enable auto-hold*/
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_EN (BIT(11))
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_EN_M (BIT(11))
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_EN_V 0x1
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_EN_S 11
|
|
/* RTC_CNTL_CLR_DG_PAD_AUTOHOLD : WO ;bitpos:[10] ;default: 1'd0 ; */
|
|
/*description: wtite only register to clear digital pad auto-hold*/
|
|
#define RTC_CNTL_CLR_DG_PAD_AUTOHOLD (BIT(10))
|
|
#define RTC_CNTL_CLR_DG_PAD_AUTOHOLD_M (BIT(10))
|
|
#define RTC_CNTL_CLR_DG_PAD_AUTOHOLD_V 0x1
|
|
#define RTC_CNTL_CLR_DG_PAD_AUTOHOLD_S 10
|
|
/* RTC_CNTL_DG_PAD_AUTOHOLD : RO ;bitpos:[9] ;default: 1'd0 ; */
|
|
/*description: read only register to indicate digital pad auto-hold status*/
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD (BIT(9))
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_M (BIT(9))
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_V 0x1
|
|
#define RTC_CNTL_DG_PAD_AUTOHOLD_S 9
|
|
/* RTC_CNTL_DIG_ISO_FORCE_ON : R/W ;bitpos:[8] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_DIG_ISO_FORCE_ON (BIT(8))
|
|
#define RTC_CNTL_DIG_ISO_FORCE_ON_M (BIT(8))
|
|
#define RTC_CNTL_DIG_ISO_FORCE_ON_V 0x1
|
|
#define RTC_CNTL_DIG_ISO_FORCE_ON_S 8
|
|
/* RTC_CNTL_DIG_ISO_FORCE_OFF : R/W ;bitpos:[7] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_DIG_ISO_FORCE_OFF (BIT(7))
|
|
#define RTC_CNTL_DIG_ISO_FORCE_OFF_M (BIT(7))
|
|
#define RTC_CNTL_DIG_ISO_FORCE_OFF_V 0x1
|
|
#define RTC_CNTL_DIG_ISO_FORCE_OFF_S 7
|
|
|
|
/* Useful groups of RTC_CNTL_DIG_ISO_REG bits */
|
|
#define RTC_CNTL_CPU_ROM_RAM_FORCE_ISO \
|
|
(RTC_CNTL_INTER_RAM4_FORCE_ISO | RTC_CNTL_INTER_RAM3_FORCE_ISO |\
|
|
RTC_CNTL_INTER_RAM2_FORCE_ISO | RTC_CNTL_INTER_RAM1_FORCE_ISO |\
|
|
RTC_CNTL_INTER_RAM0_FORCE_ISO | RTC_CNTL_ROM0_FORCE_ISO)
|
|
#define RTC_CNTL_CPU_ROM_RAM_FORCE_NOISO \
|
|
(RTC_CNTL_INTER_RAM4_FORCE_NOISO | RTC_CNTL_INTER_RAM3_FORCE_NOISO |\
|
|
RTC_CNTL_INTER_RAM2_FORCE_NOISO | RTC_CNTL_INTER_RAM1_FORCE_NOISO |\
|
|
RTC_CNTL_INTER_RAM0_FORCE_NOISO | RTC_CNTL_ROM0_FORCE_NOISO)
|
|
|
|
#define RTC_CNTL_WDTCONFIG0_REG (DR_REG_RTCCNTL_BASE + 0x8c)
|
|
/* RTC_CNTL_WDT_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
|
|
/*description: enable RTC WDT*/
|
|
#define RTC_CNTL_WDT_EN (BIT(31))
|
|
#define RTC_CNTL_WDT_EN_M (BIT(31))
|
|
#define RTC_CNTL_WDT_EN_V 0x1
|
|
#define RTC_CNTL_WDT_EN_S 31
|
|
/* RTC_CNTL_WDT_STG0 : R/W ;bitpos:[30:28] ;default: 3'h0 ; */
|
|
/*description: 1: interrupt stage en 2: CPU reset stage en 3: system reset
|
|
stage en 4: RTC reset stage en*/
|
|
#define RTC_CNTL_WDT_STG0 0x00000007
|
|
#define RTC_CNTL_WDT_STG0_M ((RTC_CNTL_WDT_STG0_V)<<(RTC_CNTL_WDT_STG0_S))
|
|
#define RTC_CNTL_WDT_STG0_V 0x7
|
|
#define RTC_CNTL_WDT_STG0_S 28
|
|
/* RTC_CNTL_WDT_STG1 : R/W ;bitpos:[27:25] ;default: 3'h0 ; */
|
|
/*description: 1: interrupt stage en 2: CPU reset stage en 3: system reset
|
|
stage en 4: RTC reset stage en*/
|
|
#define RTC_CNTL_WDT_STG1 0x00000007
|
|
#define RTC_CNTL_WDT_STG1_M ((RTC_CNTL_WDT_STG1_V)<<(RTC_CNTL_WDT_STG1_S))
|
|
#define RTC_CNTL_WDT_STG1_V 0x7
|
|
#define RTC_CNTL_WDT_STG1_S 25
|
|
/* RTC_CNTL_WDT_STG2 : R/W ;bitpos:[24:22] ;default: 3'h0 ; */
|
|
/*description: 1: interrupt stage en 2: CPU reset stage en 3: system reset
|
|
stage en 4: RTC reset stage en*/
|
|
#define RTC_CNTL_WDT_STG2 0x00000007
|
|
#define RTC_CNTL_WDT_STG2_M ((RTC_CNTL_WDT_STG2_V)<<(RTC_CNTL_WDT_STG2_S))
|
|
#define RTC_CNTL_WDT_STG2_V 0x7
|
|
#define RTC_CNTL_WDT_STG2_S 22
|
|
/* RTC_CNTL_WDT_STG3 : R/W ;bitpos:[21:19] ;default: 3'h0 ; */
|
|
/*description: 1: interrupt stage en 2: CPU reset stage en 3: system reset
|
|
stage en 4: RTC reset stage en*/
|
|
#define RTC_CNTL_WDT_STG3 0x00000007
|
|
#define RTC_CNTL_WDT_STG3_M ((RTC_CNTL_WDT_STG3_V)<<(RTC_CNTL_WDT_STG3_S))
|
|
#define RTC_CNTL_WDT_STG3_V 0x7
|
|
#define RTC_CNTL_WDT_STG3_S 19
|
|
/* RTC_CNTL_WDT_EDGE_INT_EN : R/W ;bitpos:[18] ;default: 1'h0 ; */
|
|
/*description: N/A*/
|
|
#define RTC_CNTL_WDT_EDGE_INT_EN (BIT(18))
|
|
#define RTC_CNTL_WDT_EDGE_INT_EN_M (BIT(18))
|
|
#define RTC_CNTL_WDT_EDGE_INT_EN_V 0x1
|
|
#define RTC_CNTL_WDT_EDGE_INT_EN_S 18
|
|
/* RTC_CNTL_WDT_LEVEL_INT_EN : R/W ;bitpos:[17] ;default: 1'h0 ; */
|
|
/*description: N/A*/
|
|
#define RTC_CNTL_WDT_LEVEL_INT_EN (BIT(17))
|
|
#define RTC_CNTL_WDT_LEVEL_INT_EN_M (BIT(17))
|
|
#define RTC_CNTL_WDT_LEVEL_INT_EN_V 0x1
|
|
#define RTC_CNTL_WDT_LEVEL_INT_EN_S 17
|
|
/* RTC_CNTL_WDT_CPU_RESET_LENGTH : R/W ;bitpos:[16:14] ;default: 3'h1 ; */
|
|
/*description: CPU reset counter length*/
|
|
#define RTC_CNTL_WDT_CPU_RESET_LENGTH 0x00000007
|
|
#define RTC_CNTL_WDT_CPU_RESET_LENGTH_M ((RTC_CNTL_WDT_CPU_RESET_LENGTH_V)<<(RTC_CNTL_WDT_CPU_RESET_LENGTH_S))
|
|
#define RTC_CNTL_WDT_CPU_RESET_LENGTH_V 0x7
|
|
#define RTC_CNTL_WDT_CPU_RESET_LENGTH_S 14
|
|
/* RTC_CNTL_WDT_SYS_RESET_LENGTH : R/W ;bitpos:[13:11] ;default: 3'h1 ; */
|
|
/*description: system reset counter length*/
|
|
#define RTC_CNTL_WDT_SYS_RESET_LENGTH 0x00000007
|
|
#define RTC_CNTL_WDT_SYS_RESET_LENGTH_M ((RTC_CNTL_WDT_SYS_RESET_LENGTH_V)<<(RTC_CNTL_WDT_SYS_RESET_LENGTH_S))
|
|
#define RTC_CNTL_WDT_SYS_RESET_LENGTH_V 0x7
|
|
#define RTC_CNTL_WDT_SYS_RESET_LENGTH_S 11
|
|
/* RTC_CNTL_WDT_FLASHBOOT_MOD_EN : R/W ;bitpos:[10] ;default: 1'h1 ; */
|
|
/*description: enable WDT in flash boot*/
|
|
#define RTC_CNTL_WDT_FLASHBOOT_MOD_EN (BIT(10))
|
|
#define RTC_CNTL_WDT_FLASHBOOT_MOD_EN_M (BIT(10))
|
|
#define RTC_CNTL_WDT_FLASHBOOT_MOD_EN_V 0x1
|
|
#define RTC_CNTL_WDT_FLASHBOOT_MOD_EN_S 10
|
|
/* RTC_CNTL_WDT_PROCPU_RESET_EN : R/W ;bitpos:[9] ;default: 1'd0 ; */
|
|
/*description: enable WDT reset PRO CPU*/
|
|
#define RTC_CNTL_WDT_PROCPU_RESET_EN (BIT(9))
|
|
#define RTC_CNTL_WDT_PROCPU_RESET_EN_M (BIT(9))
|
|
#define RTC_CNTL_WDT_PROCPU_RESET_EN_V 0x1
|
|
#define RTC_CNTL_WDT_PROCPU_RESET_EN_S 9
|
|
/* RTC_CNTL_WDT_APPCPU_RESET_EN : R/W ;bitpos:[8] ;default: 1'd0 ; */
|
|
/*description: enable WDT reset APP CPU*/
|
|
#define RTC_CNTL_WDT_APPCPU_RESET_EN (BIT(8))
|
|
#define RTC_CNTL_WDT_APPCPU_RESET_EN_M (BIT(8))
|
|
#define RTC_CNTL_WDT_APPCPU_RESET_EN_V 0x1
|
|
#define RTC_CNTL_WDT_APPCPU_RESET_EN_S 8
|
|
/* RTC_CNTL_WDT_PAUSE_IN_SLP : R/W ;bitpos:[7] ;default: 1'd1 ; */
|
|
/*description: pause WDT in sleep*/
|
|
#define RTC_CNTL_WDT_PAUSE_IN_SLP (BIT(7))
|
|
#define RTC_CNTL_WDT_PAUSE_IN_SLP_M (BIT(7))
|
|
#define RTC_CNTL_WDT_PAUSE_IN_SLP_V 0x1
|
|
#define RTC_CNTL_WDT_PAUSE_IN_SLP_S 7
|
|
/* RTC_CNTL_WDT_STGX : */
|
|
/*description: stage action selection values */
|
|
#define RTC_WDT_STG_SEL_OFF 0
|
|
#define RTC_WDT_STG_SEL_INT 1
|
|
#define RTC_WDT_STG_SEL_RESET_CPU 2
|
|
#define RTC_WDT_STG_SEL_RESET_SYSTEM 3
|
|
#define RTC_WDT_STG_SEL_RESET_RTC 4
|
|
|
|
#define RTC_CNTL_WDTCONFIG1_REG (DR_REG_RTCCNTL_BASE + 0x90)
|
|
/* RTC_CNTL_WDT_STG0_HOLD : R/W ;bitpos:[31:0] ;default: 32'd128000 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WDT_STG0_HOLD 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG0_HOLD_M ((RTC_CNTL_WDT_STG0_HOLD_V)<<(RTC_CNTL_WDT_STG0_HOLD_S))
|
|
#define RTC_CNTL_WDT_STG0_HOLD_V 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG0_HOLD_S 0
|
|
|
|
#define RTC_CNTL_WDTCONFIG2_REG (DR_REG_RTCCNTL_BASE + 0x94)
|
|
/* RTC_CNTL_WDT_STG1_HOLD : R/W ;bitpos:[31:0] ;default: 32'd80000 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WDT_STG1_HOLD 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG1_HOLD_M ((RTC_CNTL_WDT_STG1_HOLD_V)<<(RTC_CNTL_WDT_STG1_HOLD_S))
|
|
#define RTC_CNTL_WDT_STG1_HOLD_V 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG1_HOLD_S 0
|
|
|
|
#define RTC_CNTL_WDTCONFIG3_REG (DR_REG_RTCCNTL_BASE + 0x98)
|
|
/* RTC_CNTL_WDT_STG2_HOLD : R/W ;bitpos:[31:0] ;default: 32'hfff ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WDT_STG2_HOLD 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG2_HOLD_M ((RTC_CNTL_WDT_STG2_HOLD_V)<<(RTC_CNTL_WDT_STG2_HOLD_S))
|
|
#define RTC_CNTL_WDT_STG2_HOLD_V 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG2_HOLD_S 0
|
|
|
|
#define RTC_CNTL_WDTCONFIG4_REG (DR_REG_RTCCNTL_BASE + 0x9c)
|
|
/* RTC_CNTL_WDT_STG3_HOLD : R/W ;bitpos:[31:0] ;default: 32'hfff ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WDT_STG3_HOLD 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG3_HOLD_M ((RTC_CNTL_WDT_STG3_HOLD_V)<<(RTC_CNTL_WDT_STG3_HOLD_S))
|
|
#define RTC_CNTL_WDT_STG3_HOLD_V 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_STG3_HOLD_S 0
|
|
|
|
#define RTC_CNTL_WDTFEED_REG (DR_REG_RTCCNTL_BASE + 0xa0)
|
|
/* RTC_CNTL_WDT_FEED : WO ;bitpos:[31] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WDT_FEED (BIT(31))
|
|
#define RTC_CNTL_WDT_FEED_M (BIT(31))
|
|
#define RTC_CNTL_WDT_FEED_V 0x1
|
|
#define RTC_CNTL_WDT_FEED_S 31
|
|
|
|
#define RTC_CNTL_WDTWPROTECT_REG (DR_REG_RTCCNTL_BASE + 0xa4)
|
|
/* RTC_CNTL_WDT_WKEY : R/W ;bitpos:[31:0] ;default: 32'h50d83aa1 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_WDT_WKEY 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_WKEY_M ((RTC_CNTL_WDT_WKEY_V)<<(RTC_CNTL_WDT_WKEY_S))
|
|
#define RTC_CNTL_WDT_WKEY_V 0xFFFFFFFF
|
|
#define RTC_CNTL_WDT_WKEY_S 0
|
|
|
|
#define RTC_CNTL_TEST_MUX_REG (DR_REG_RTCCNTL_BASE + 0xa8)
|
|
/* RTC_CNTL_DTEST_RTC : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
|
|
/*description: DTEST_RTC*/
|
|
#define RTC_CNTL_DTEST_RTC 0x00000003
|
|
#define RTC_CNTL_DTEST_RTC_M ((RTC_CNTL_DTEST_RTC_V)<<(RTC_CNTL_DTEST_RTC_S))
|
|
#define RTC_CNTL_DTEST_RTC_V 0x3
|
|
#define RTC_CNTL_DTEST_RTC_S 30
|
|
/* RTC_CNTL_ENT_RTC : R/W ;bitpos:[29] ;default: 1'd0 ; */
|
|
/*description: ENT_RTC*/
|
|
#define RTC_CNTL_ENT_RTC (BIT(29))
|
|
#define RTC_CNTL_ENT_RTC_M (BIT(29))
|
|
#define RTC_CNTL_ENT_RTC_V 0x1
|
|
#define RTC_CNTL_ENT_RTC_S 29
|
|
|
|
#define RTC_CNTL_SW_CPU_STALL_REG (DR_REG_RTCCNTL_BASE + 0xac)
|
|
/* RTC_CNTL_SW_STALL_PROCPU_C1 : R/W ;bitpos:[31:26] ;default: 6'b0 ; */
|
|
/*description: {reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} ==
|
|
0x86 will stall PRO CPU*/
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C1 0x0000003F
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C1_M ((RTC_CNTL_SW_STALL_PROCPU_C1_V)<<(RTC_CNTL_SW_STALL_PROCPU_C1_S))
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C1_V 0x3F
|
|
#define RTC_CNTL_SW_STALL_PROCPU_C1_S 26
|
|
/* RTC_CNTL_SW_STALL_APPCPU_C1 : R/W ;bitpos:[25:20] ;default: 6'b0 ; */
|
|
/*description: {reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} ==
|
|
0x86 will stall APP CPU*/
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C1 0x0000003F
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C1_M ((RTC_CNTL_SW_STALL_APPCPU_C1_V)<<(RTC_CNTL_SW_STALL_APPCPU_C1_S))
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C1_V 0x3F
|
|
#define RTC_CNTL_SW_STALL_APPCPU_C1_S 20
|
|
|
|
#define RTC_CNTL_STORE4_REG (DR_REG_RTCCNTL_BASE + 0xb0)
|
|
/* RTC_CNTL_SCRATCH4 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH4 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH4_M ((RTC_CNTL_SCRATCH4_V)<<(RTC_CNTL_SCRATCH4_S))
|
|
#define RTC_CNTL_SCRATCH4_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH4_S 0
|
|
|
|
#define RTC_CNTL_STORE5_REG (DR_REG_RTCCNTL_BASE + 0xb4)
|
|
/* RTC_CNTL_SCRATCH5 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH5 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH5_M ((RTC_CNTL_SCRATCH5_V)<<(RTC_CNTL_SCRATCH5_S))
|
|
#define RTC_CNTL_SCRATCH5_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH5_S 0
|
|
|
|
#define RTC_CNTL_STORE6_REG (DR_REG_RTCCNTL_BASE + 0xb8)
|
|
/* RTC_CNTL_SCRATCH6 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH6 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH6_M ((RTC_CNTL_SCRATCH6_V)<<(RTC_CNTL_SCRATCH6_S))
|
|
#define RTC_CNTL_SCRATCH6_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH6_S 0
|
|
|
|
#define RTC_CNTL_STORE7_REG (DR_REG_RTCCNTL_BASE + 0xbc)
|
|
/* RTC_CNTL_SCRATCH7 : R/W ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: 32-bit general purpose retention register*/
|
|
#define RTC_CNTL_SCRATCH7 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH7_M ((RTC_CNTL_SCRATCH7_V)<<(RTC_CNTL_SCRATCH7_S))
|
|
#define RTC_CNTL_SCRATCH7_V 0xFFFFFFFF
|
|
#define RTC_CNTL_SCRATCH7_S 0
|
|
|
|
#define RTC_CNTL_LOW_POWER_ST_REG (DR_REG_RTCCNTL_BASE + 0xc0)
|
|
/* RTC_CNTL_RDY_FOR_WAKEUP : R/0; bitpos:[19]; default: 0 */
|
|
/*description: 1 if RTC controller is ready to execute WAKE instruction, 0 otherwise */
|
|
#define RTC_CNTL_RDY_FOR_WAKEUP (BIT(19))
|
|
#define RTC_CNTL_RDY_FOR_WAKEUP_M (BIT(19))
|
|
#define RTC_CNTL_RDY_FOR_WAKEUP_V 0x1
|
|
#define RTC_CNTL_RDY_FOR_WAKEUP_S 19
|
|
|
|
/* Compatibility definition */
|
|
#define RTC_CNTL_DIAG0_REG RTC_CNTL_LOW_POWER_ST_REG
|
|
/* RTC_CNTL_LOW_POWER_DIAG0 : RO ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_LOW_POWER_DIAG0 0xFFFFFFFF
|
|
#define RTC_CNTL_LOW_POWER_DIAG0_M ((RTC_CNTL_LOW_POWER_DIAG0_V)<<(RTC_CNTL_LOW_POWER_DIAG0_S))
|
|
#define RTC_CNTL_LOW_POWER_DIAG0_V 0xFFFFFFFF
|
|
#define RTC_CNTL_LOW_POWER_DIAG0_S 0
|
|
|
|
#define RTC_CNTL_DIAG1_REG (DR_REG_RTCCNTL_BASE + 0xc4)
|
|
/* RTC_CNTL_LOW_POWER_DIAG1 : RO ;bitpos:[31:0] ;default: 0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_LOW_POWER_DIAG1 0xFFFFFFFF
|
|
#define RTC_CNTL_LOW_POWER_DIAG1_M ((RTC_CNTL_LOW_POWER_DIAG1_V)<<(RTC_CNTL_LOW_POWER_DIAG1_S))
|
|
#define RTC_CNTL_LOW_POWER_DIAG1_V 0xFFFFFFFF
|
|
#define RTC_CNTL_LOW_POWER_DIAG1_S 0
|
|
|
|
#define RTC_CNTL_HOLD_FORCE_REG (DR_REG_RTCCNTL_BASE + 0xc8)
|
|
/* RTC_CNTL_X32N_HOLD_FORCE : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_X32N_HOLD_FORCE (BIT(17))
|
|
#define RTC_CNTL_X32N_HOLD_FORCE_M (BIT(17))
|
|
#define RTC_CNTL_X32N_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_X32N_HOLD_FORCE_S 17
|
|
/* RTC_CNTL_X32P_HOLD_FORCE : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_X32P_HOLD_FORCE (BIT(16))
|
|
#define RTC_CNTL_X32P_HOLD_FORCE_M (BIT(16))
|
|
#define RTC_CNTL_X32P_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_X32P_HOLD_FORCE_S 16
|
|
/* RTC_CNTL_TOUCH_PAD7_HOLD_FORCE : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD7_HOLD_FORCE (BIT(15))
|
|
#define RTC_CNTL_TOUCH_PAD7_HOLD_FORCE_M (BIT(15))
|
|
#define RTC_CNTL_TOUCH_PAD7_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD7_HOLD_FORCE_S 15
|
|
/* RTC_CNTL_TOUCH_PAD6_HOLD_FORCE : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD6_HOLD_FORCE (BIT(14))
|
|
#define RTC_CNTL_TOUCH_PAD6_HOLD_FORCE_M (BIT(14))
|
|
#define RTC_CNTL_TOUCH_PAD6_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD6_HOLD_FORCE_S 14
|
|
/* RTC_CNTL_TOUCH_PAD5_HOLD_FORCE : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD5_HOLD_FORCE (BIT(13))
|
|
#define RTC_CNTL_TOUCH_PAD5_HOLD_FORCE_M (BIT(13))
|
|
#define RTC_CNTL_TOUCH_PAD5_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD5_HOLD_FORCE_S 13
|
|
/* RTC_CNTL_TOUCH_PAD4_HOLD_FORCE : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD4_HOLD_FORCE (BIT(12))
|
|
#define RTC_CNTL_TOUCH_PAD4_HOLD_FORCE_M (BIT(12))
|
|
#define RTC_CNTL_TOUCH_PAD4_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD4_HOLD_FORCE_S 12
|
|
/* RTC_CNTL_TOUCH_PAD3_HOLD_FORCE : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD3_HOLD_FORCE (BIT(11))
|
|
#define RTC_CNTL_TOUCH_PAD3_HOLD_FORCE_M (BIT(11))
|
|
#define RTC_CNTL_TOUCH_PAD3_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD3_HOLD_FORCE_S 11
|
|
/* RTC_CNTL_TOUCH_PAD2_HOLD_FORCE : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD2_HOLD_FORCE (BIT(10))
|
|
#define RTC_CNTL_TOUCH_PAD2_HOLD_FORCE_M (BIT(10))
|
|
#define RTC_CNTL_TOUCH_PAD2_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD2_HOLD_FORCE_S 10
|
|
/* RTC_CNTL_TOUCH_PAD1_HOLD_FORCE : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD1_HOLD_FORCE (BIT(9))
|
|
#define RTC_CNTL_TOUCH_PAD1_HOLD_FORCE_M (BIT(9))
|
|
#define RTC_CNTL_TOUCH_PAD1_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD1_HOLD_FORCE_S 9
|
|
/* RTC_CNTL_TOUCH_PAD0_HOLD_FORCE : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_TOUCH_PAD0_HOLD_FORCE (BIT(8))
|
|
#define RTC_CNTL_TOUCH_PAD0_HOLD_FORCE_M (BIT(8))
|
|
#define RTC_CNTL_TOUCH_PAD0_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_TOUCH_PAD0_HOLD_FORCE_S 8
|
|
/* RTC_CNTL_SENSE4_HOLD_FORCE : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_SENSE4_HOLD_FORCE (BIT(7))
|
|
#define RTC_CNTL_SENSE4_HOLD_FORCE_M (BIT(7))
|
|
#define RTC_CNTL_SENSE4_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_SENSE4_HOLD_FORCE_S 7
|
|
/* RTC_CNTL_SENSE3_HOLD_FORCE : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_SENSE3_HOLD_FORCE (BIT(6))
|
|
#define RTC_CNTL_SENSE3_HOLD_FORCE_M (BIT(6))
|
|
#define RTC_CNTL_SENSE3_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_SENSE3_HOLD_FORCE_S 6
|
|
/* RTC_CNTL_SENSE2_HOLD_FORCE : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_SENSE2_HOLD_FORCE (BIT(5))
|
|
#define RTC_CNTL_SENSE2_HOLD_FORCE_M (BIT(5))
|
|
#define RTC_CNTL_SENSE2_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_SENSE2_HOLD_FORCE_S 5
|
|
/* RTC_CNTL_SENSE1_HOLD_FORCE : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_SENSE1_HOLD_FORCE (BIT(4))
|
|
#define RTC_CNTL_SENSE1_HOLD_FORCE_M (BIT(4))
|
|
#define RTC_CNTL_SENSE1_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_SENSE1_HOLD_FORCE_S 4
|
|
/* RTC_CNTL_PDAC2_HOLD_FORCE : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_PDAC2_HOLD_FORCE (BIT(3))
|
|
#define RTC_CNTL_PDAC2_HOLD_FORCE_M (BIT(3))
|
|
#define RTC_CNTL_PDAC2_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_PDAC2_HOLD_FORCE_S 3
|
|
/* RTC_CNTL_PDAC1_HOLD_FORCE : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_PDAC1_HOLD_FORCE (BIT(2))
|
|
#define RTC_CNTL_PDAC1_HOLD_FORCE_M (BIT(2))
|
|
#define RTC_CNTL_PDAC1_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_PDAC1_HOLD_FORCE_S 2
|
|
/* RTC_CNTL_ADC2_HOLD_FORCE : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ADC2_HOLD_FORCE (BIT(1))
|
|
#define RTC_CNTL_ADC2_HOLD_FORCE_M (BIT(1))
|
|
#define RTC_CNTL_ADC2_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_ADC2_HOLD_FORCE_S 1
|
|
/* RTC_CNTL_ADC1_HOLD_FORCE : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_ADC1_HOLD_FORCE (BIT(0))
|
|
#define RTC_CNTL_ADC1_HOLD_FORCE_M (BIT(0))
|
|
#define RTC_CNTL_ADC1_HOLD_FORCE_V 0x1
|
|
#define RTC_CNTL_ADC1_HOLD_FORCE_S 0
|
|
|
|
#define RTC_CNTL_EXT_WAKEUP1_REG (DR_REG_RTCCNTL_BASE + 0xcc)
|
|
/* RTC_CNTL_EXT_WAKEUP1_STATUS_CLR : WO ;bitpos:[18] ;default: 1'd0 ; */
|
|
/*description: clear ext wakeup1 status*/
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_CLR (BIT(18))
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_CLR_M (BIT(18))
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_CLR_V 0x1
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_CLR_S 18
|
|
/* RTC_CNTL_EXT_WAKEUP1_SEL : R/W ;bitpos:[17:0] ;default: 18'd0 ; */
|
|
/*description: Bitmap to select RTC pads for ext wakeup1*/
|
|
#define RTC_CNTL_EXT_WAKEUP1_SEL 0x0003FFFF
|
|
#define RTC_CNTL_EXT_WAKEUP1_SEL_M ((RTC_CNTL_EXT_WAKEUP1_SEL_V)<<(RTC_CNTL_EXT_WAKEUP1_SEL_S))
|
|
#define RTC_CNTL_EXT_WAKEUP1_SEL_V 0x3FFFF
|
|
#define RTC_CNTL_EXT_WAKEUP1_SEL_S 0
|
|
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_REG (DR_REG_RTCCNTL_BASE + 0xd0)
|
|
/* RTC_CNTL_EXT_WAKEUP1_STATUS : RO ;bitpos:[17:0] ;default: 18'd0 ; */
|
|
/*description: ext wakeup1 status*/
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS 0x0003FFFF
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_M ((RTC_CNTL_EXT_WAKEUP1_STATUS_V)<<(RTC_CNTL_EXT_WAKEUP1_STATUS_S))
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_V 0x3FFFF
|
|
#define RTC_CNTL_EXT_WAKEUP1_STATUS_S 0
|
|
|
|
#define RTC_CNTL_BROWN_OUT_REG (DR_REG_RTCCNTL_BASE + 0xd4)
|
|
/* RTC_CNTL_BROWN_OUT_DET : RO ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: brown out detect*/
|
|
#define RTC_CNTL_BROWN_OUT_DET (BIT(31))
|
|
#define RTC_CNTL_BROWN_OUT_DET_M (BIT(31))
|
|
#define RTC_CNTL_BROWN_OUT_DET_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_DET_S 31
|
|
/* RTC_CNTL_BROWN_OUT_ENA : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: enable brown out*/
|
|
#define RTC_CNTL_BROWN_OUT_ENA (BIT(30))
|
|
#define RTC_CNTL_BROWN_OUT_ENA_M (BIT(30))
|
|
#define RTC_CNTL_BROWN_OUT_ENA_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_ENA_S 30
|
|
/* RTC_CNTL_DBROWN_OUT_THRES : R/W ;bitpos:[29:27] ;default: 3'b010 ; */
|
|
/*description: brown out threshold*/
|
|
#define RTC_CNTL_DBROWN_OUT_THRES 0x00000007
|
|
#define RTC_CNTL_DBROWN_OUT_THRES_M ((RTC_CNTL_DBROWN_OUT_THRES_V)<<(RTC_CNTL_DBROWN_OUT_THRES_S))
|
|
#define RTC_CNTL_DBROWN_OUT_THRES_V 0x7
|
|
#define RTC_CNTL_DBROWN_OUT_THRES_S 27
|
|
/* RTC_CNTL_BROWN_OUT_RST_ENA : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: enable brown out reset*/
|
|
#define RTC_CNTL_BROWN_OUT_RST_ENA (BIT(26))
|
|
#define RTC_CNTL_BROWN_OUT_RST_ENA_M (BIT(26))
|
|
#define RTC_CNTL_BROWN_OUT_RST_ENA_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_RST_ENA_S 26
|
|
/* RTC_CNTL_BROWN_OUT_RST_WAIT : R/W ;bitpos:[25:16] ;default: 10'h3ff ; */
|
|
/*description: brown out reset wait cycles*/
|
|
#define RTC_CNTL_BROWN_OUT_RST_WAIT 0x000003FF
|
|
#define RTC_CNTL_BROWN_OUT_RST_WAIT_M ((RTC_CNTL_BROWN_OUT_RST_WAIT_V)<<(RTC_CNTL_BROWN_OUT_RST_WAIT_S))
|
|
#define RTC_CNTL_BROWN_OUT_RST_WAIT_V 0x3FF
|
|
#define RTC_CNTL_BROWN_OUT_RST_WAIT_S 16
|
|
/* RTC_CNTL_BROWN_OUT_PD_RF_ENA : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: enable power down RF when brown out happens*/
|
|
#define RTC_CNTL_BROWN_OUT_PD_RF_ENA (BIT(15))
|
|
#define RTC_CNTL_BROWN_OUT_PD_RF_ENA_M (BIT(15))
|
|
#define RTC_CNTL_BROWN_OUT_PD_RF_ENA_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_PD_RF_ENA_S 15
|
|
/* RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: enable close flash when brown out happens*/
|
|
#define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA (BIT(14))
|
|
#define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA_M (BIT(14))
|
|
#define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA_V 0x1
|
|
#define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA_S 14
|
|
|
|
#define RTC_MEM_CONF (DR_REG_RTCCNTL_BASE + 0x40 * 4)
|
|
#define RTC_MEM_CRC_FINISH (BIT(31))
|
|
#define RTC_MEM_CRC_FINISH_M (BIT(31))
|
|
#define RTC_MEM_CRC_FINISH_V 0x1
|
|
#define RTC_MEM_CRC_FINISH_S (31)
|
|
#define RTC_MEM_CRC_LEN (0x7ff)
|
|
#define RTC_MEM_CRC_LEN_M ((RTC_MEM_CRC_LEN_V)<<(RTC_MEM_CRC_LEN_S))
|
|
#define RTC_MEM_CRC_LEN_V (0x7ff)
|
|
#define RTC_MEM_CRC_LEN_S (20)
|
|
#define RTC_MEM_CRC_ADDR (0x7ff)
|
|
#define RTC_MEM_CRC_ADDR_M ((RTC_MEM_CRC_ADDR_V)<<(RTC_MEM_CRC_ADDR_S))
|
|
#define RTC_MEM_CRC_ADDR_V (0x7ff)
|
|
#define RTC_MEM_CRC_ADDR_S (9)
|
|
#define RTC_MEM_CRC_START (BIT(8))
|
|
#define RTC_MEM_CRC_START_M (BIT(8))
|
|
#define RTC_MEM_CRC_START_V 0x1
|
|
#define RTC_MEM_CRC_START_S (8)
|
|
#define RTC_MEM_PID_CONF (0xff)
|
|
#define RTC_MEM_PID_CONF_M (0xff)
|
|
#define RTC_MEM_PID_CONF_V (0xff)
|
|
#define RTC_MEM_PID_CONF_S (0)
|
|
|
|
#define RTC_MEM_CRC_RES (DR_REG_RTCCNTL_BASE + 0x41 * 4)
|
|
|
|
#define RTC_CNTL_DATE_REG (DR_REG_RTCCNTL_BASE + 0x13c)
|
|
/* RTC_CNTL_CNTL_DATE : R/W ;bitpos:[27:0] ;default: 28'h1604280 ; */
|
|
/*description: */
|
|
#define RTC_CNTL_CNTL_DATE 0x0FFFFFFF
|
|
#define RTC_CNTL_CNTL_DATE_M ((RTC_CNTL_CNTL_DATE_V)<<(RTC_CNTL_CNTL_DATE_S))
|
|
#define RTC_CNTL_CNTL_DATE_V 0xFFFFFFF
|
|
#define RTC_CNTL_CNTL_DATE_S 0
|
|
#define RTC_CNTL_RTC_CNTL_DATE_VERSION 0x1604280
|
|
|
|
|
|
|
|
|
|
#endif /*_SOC_RTC_CNTL_REG_H_ */
|
|
|
|
|