mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
275 lines
11 KiB
C
275 lines
11 KiB
C
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_IO_MUX_REG_H_
|
|
#define _SOC_IO_MUX_REG_H_
|
|
|
|
#include "soc.h"
|
|
|
|
/* The following are the bit fields for PERIPHS_IO_MUX_x_U registers */
|
|
/* Output enable in sleep mode */
|
|
#define SLP_OE (BIT(0))
|
|
#define SLP_OE_M (BIT(0))
|
|
#define SLP_OE_V 1
|
|
#define SLP_OE_S 0
|
|
/* Pin used for wakeup from sleep */
|
|
#define SLP_SEL (BIT(1))
|
|
#define SLP_SEL_M (BIT(1))
|
|
#define SLP_SEL_V 1
|
|
#define SLP_SEL_S 1
|
|
/* Pulldown enable in sleep mode */
|
|
#define SLP_PD (BIT(2))
|
|
#define SLP_PD_M (BIT(2))
|
|
#define SLP_PD_V 1
|
|
#define SLP_PD_S 2
|
|
/* Pullup enable in sleep mode */
|
|
#define SLP_PU (BIT(3))
|
|
#define SLP_PU_M (BIT(3))
|
|
#define SLP_PU_V 1
|
|
#define SLP_PU_S 3
|
|
/* Input enable in sleep mode */
|
|
#define SLP_IE (BIT(4))
|
|
#define SLP_IE_M (BIT(4))
|
|
#define SLP_IE_V 1
|
|
#define SLP_IE_S 4
|
|
/* Drive strength in sleep mode */
|
|
#define SLP_DRV 0x3
|
|
#define SLP_DRV_M (SLP_DRV_V << SLP_DRV_S)
|
|
#define SLP_DRV_V 0x3
|
|
#define SLP_DRV_S 5
|
|
/* Pulldown enable */
|
|
#define FUN_PD (BIT(7))
|
|
#define FUN_PD_M (BIT(7))
|
|
#define FUN_PD_V 1
|
|
#define FUN_PD_S 7
|
|
/* Pullup enable */
|
|
#define FUN_PU (BIT(8))
|
|
#define FUN_PU_M (BIT(8))
|
|
#define FUN_PU_V 1
|
|
#define FUN_PU_S 8
|
|
/* Input enable */
|
|
#define FUN_IE (BIT(9))
|
|
#define FUN_IE_M (FUN_IE_V << FUN_IE_S)
|
|
#define FUN_IE_V 1
|
|
#define FUN_IE_S 9
|
|
/* Drive strength */
|
|
#define FUN_DRV 0x3
|
|
#define FUN_DRV_M (FUN_DRV_V << FUN_DRV_S)
|
|
#define FUN_DRV_V 0x3
|
|
#define FUN_DRV_S 10
|
|
/* Function select (possible values are defined for each pin as FUNC_pinname_function below) */
|
|
#define MCU_SEL 0x7
|
|
#define MCU_SEL_M (MCU_SEL_V << MCU_SEL_S)
|
|
#define MCU_SEL_V 0x7
|
|
#define MCU_SEL_S 12
|
|
|
|
#define PIN_SLP_INPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_IE)
|
|
#define PIN_SLP_INPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_IE)
|
|
#define PIN_SLP_OUTPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_OE)
|
|
#define PIN_SLP_OUTPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_OE)
|
|
#define PIN_SLP_PULLUP_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_PU)
|
|
#define PIN_SLP_PULLUP_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_PU)
|
|
#define PIN_SLP_PULLDOWN_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_PD)
|
|
#define PIN_SLP_PULLDOWN_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_PD)
|
|
#define PIN_SLP_SEL_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_SEL)
|
|
#define PIN_SLP_SEL_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_SEL)
|
|
|
|
|
|
#define PIN_INPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,FUN_IE)
|
|
#define PIN_INPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,FUN_IE)
|
|
#define PIN_SET_DRV(PIN_NAME, drv) REG_SET_FIELD(PIN_NAME, FUN_DRV, (drv));
|
|
#define PIN_PULLUP_DIS(PIN_NAME) REG_CLR_BIT(PIN_NAME, FUN_PU)
|
|
#define PIN_PULLUP_EN(PIN_NAME) REG_SET_BIT(PIN_NAME, FUN_PU)
|
|
#define PIN_PULLDWN_DIS(PIN_NAME) REG_CLR_BIT(PIN_NAME, FUN_PD)
|
|
#define PIN_PULLDWN_EN(PIN_NAME) REG_SET_BIT(PIN_NAME, FUN_PD)
|
|
#define PIN_FUNC_SELECT(PIN_NAME, FUNC) REG_SET_FIELD(PIN_NAME, MCU_SEL, FUNC)
|
|
|
|
#define IO_MUX_GPIO0_REG PERIPHS_IO_MUX_XTAL_32K_P_U
|
|
#define IO_MUX_GPIO1_REG PERIPHS_IO_MUX_XTAL_32K_N_U
|
|
#define IO_MUX_GPIO2_REG PERIPHS_IO_MUX_GPIO2_U
|
|
#define IO_MUX_GPIO3_REG PERIPHS_IO_MUX_GPIO3_U
|
|
#define IO_MUX_GPIO4_REG PERIPHS_IO_MUX_MTMS_U
|
|
#define IO_MUX_GPIO5_REG PERIPHS_IO_MUX_MTDI_U
|
|
#define IO_MUX_GPIO6_REG PERIPHS_IO_MUX_MTCK_U
|
|
#define IO_MUX_GPIO7_REG PERIPHS_IO_MUX_MTDO_U
|
|
#define IO_MUX_GPIO8_REG PERIPHS_IO_MUX_GPIO8_U
|
|
#define IO_MUX_GPIO9_REG PERIPHS_IO_MUX_GPIO9_U
|
|
#define IO_MUX_GPIO10_REG PERIPHS_IO_MUX_GPIO10_U
|
|
#define IO_MUX_GPIO11_REG PERIPHS_IO_MUX_VDD_SPI_U
|
|
#define IO_MUX_GPIO12_REG PERIPHS_IO_MUX_SPIHD_U
|
|
#define IO_MUX_GPIO13_REG PERIPHS_IO_MUX_SPIWP_U
|
|
#define IO_MUX_GPIO14_REG PERIPHS_IO_MUX_SPICS0_U
|
|
#define IO_MUX_GPIO15_REG PERIPHS_IO_MUX_SPICLK_U
|
|
#define IO_MUX_GPIO16_REG PERIPHS_IO_MUX_SPID_U
|
|
#define IO_MUX_GPIO17_REG PERIPHS_IO_MUX_SPIQ_U
|
|
#define IO_MUX_GPIO18_REG PERIPHS_IO_MUX_GPIO18_U
|
|
#define IO_MUX_GPIO19_REG PERIPHS_IO_MUX_GPIO19_U
|
|
#define IO_MUX_GPIO20_REG PERIPHS_IO_MUX_U0RXD_U
|
|
#define IO_MUX_GPIO21_REG PERIPHS_IO_MUX_U0TXD_U
|
|
|
|
/* Value to set in IO Mux to use a pin as GPIO. */
|
|
#define PIN_FUNC_GPIO 1
|
|
|
|
#define GPIO_PAD_PULLUP(num) do{PIN_PULLDWN_DIS(IOMUX_REG_GPIO##num);PIN_PULLUP_EN(IOMUX_REG_GPIO##num);}while(0)
|
|
#define GPIO_PAD_PULLDOWN(num) do{PIN_PULLUP_DIS(IOMUX_REG_GPIO##num);PIN_PULLDWN_EN(IOMUX_REG_GPIO##num);}while(0)
|
|
#define GPIO_PAD_SET_DRV(num, drv) PIN_SET_DRV(IOMUX_REG_GPIO##num, drv)
|
|
|
|
#define U0RXD_GPIO_NUM 20
|
|
#define U0TXD_GPIO_NUM 21
|
|
|
|
#define SPI_HD_GPIO_NUM 12
|
|
#define SPI_WP_GPIO_NUM 13
|
|
#define SPI_CS0_GPIO_NUM 14
|
|
#define SPI_CLK_GPIO_NUM 15
|
|
#define SPI_D_GPIO_NUM 16
|
|
#define SPI_Q_GPIO_NUM 17
|
|
|
|
#define SD_CLK_GPIO_NUM 12
|
|
#define SD_CMD_GPIO_NUM 11
|
|
#define SD_DATA0_GPIO_NUM 13
|
|
#define SD_DATA1_GPIO_NUM 14
|
|
#define SD_DATA2_GPIO_NUM 9
|
|
#define SD_DATA3_GPIO_NUM 10
|
|
|
|
#define MAX_RTC_GPIO_NUM 5
|
|
#define MAX_PAD_GPIO_NUM 21
|
|
#define MAX_GPIO_NUM 25
|
|
|
|
#define REG_IO_MUX_BASE DR_REG_IO_MUX_BASE
|
|
#define PIN_CTRL (REG_IO_MUX_BASE +0x00)
|
|
#define PAD_POWER_SEL BIT(15)
|
|
#define PAD_POWER_SEL_V 0x1
|
|
#define PAD_POWER_SEL_M BIT(15)
|
|
#define PAD_POWER_SEL_S 15
|
|
|
|
|
|
#define PAD_POWER_SWITCH_DELAY 0x7
|
|
#define PAD_POWER_SWITCH_DELAY_V 0x7
|
|
#define PAD_POWER_SWITCH_DELAY_M (PAD_POWER_SWITCH_DELAY_V << PAD_POWER_SWITCH_DELAY_S)
|
|
#define PAD_POWER_SWITCH_DELAY_S 12
|
|
|
|
|
|
#define CLK_OUT3 0xf
|
|
#define CLK_OUT3_V CLK_OUT3
|
|
#define CLK_OUT3_S 8
|
|
#define CLK_OUT3_M (CLK_OUT3_V << CLK_OUT3_S)
|
|
#define CLK_OUT2 0xf
|
|
#define CLK_OUT2_V CLK_OUT2
|
|
#define CLK_OUT2_S 4
|
|
#define CLK_OUT2_M (CLK_OUT2_V << CLK_OUT2_S)
|
|
#define CLK_OUT1 0xf
|
|
#define CLK_OUT1_V CLK_OUT1
|
|
#define CLK_OUT1_S 0
|
|
#define CLK_OUT1_M (CLK_OUT1_V << CLK_OUT1_S)
|
|
|
|
#define PERIPHS_IO_MUX_XTAL_32K_P_U (REG_IO_MUX_BASE +0x04)
|
|
#define FUNC_XTAL_32K_P_GPIO0 1
|
|
#define FUNC_XTAL_32K_P_GPIO0_0 0
|
|
|
|
#define PERIPHS_IO_MUX_XTAL_32K_N_U (REG_IO_MUX_BASE +0x08)
|
|
#define FUNC_XTAL_32K_N_GPIO1 1
|
|
#define FUNC_XTAL_32K_N_GPIO1_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO2_U (REG_IO_MUX_BASE +0x0c)
|
|
#define FUNC_GPIO2_FSPIQ 2
|
|
#define FUNC_GPIO2_GPIO2 1
|
|
#define FUNC_GPIO2_GPIO2_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO3_U (REG_IO_MUX_BASE +0x10)
|
|
#define FUNC_GPIO3_GPIO3 1
|
|
#define FUNC_GPIO3_GPIO3_0 0
|
|
|
|
#define PERIPHS_IO_MUX_MTMS_U (REG_IO_MUX_BASE +0x14)
|
|
#define FUNC_MTMS_FSPIHD 2
|
|
#define FUNC_MTMS_GPIO4 1
|
|
#define FUNC_MTMS_MTMS 0
|
|
|
|
#define PERIPHS_IO_MUX_MTDI_U (REG_IO_MUX_BASE +0x18)
|
|
#define FUNC_MTDI_FSPIWP 2
|
|
#define FUNC_MTDI_GPIO5 1
|
|
#define FUNC_MTDI_MTDI 0
|
|
|
|
#define PERIPHS_IO_MUX_MTCK_U (REG_IO_MUX_BASE +0x1c)
|
|
#define FUNC_MTCK_FSPICLK 2
|
|
#define FUNC_MTCK_GPIO6 1
|
|
#define FUNC_MTCK_MTCK 0
|
|
|
|
#define PERIPHS_IO_MUX_MTDO_U (REG_IO_MUX_BASE +0x20)
|
|
#define FUNC_MTDO_FSPID 2
|
|
#define FUNC_MTDO_GPIO7 1
|
|
#define FUNC_MTDO_MTDO 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO8_U (REG_IO_MUX_BASE +0x24)
|
|
#define FUNC_GPIO8_GPIO8 1
|
|
#define FUNC_GPIO8_GPIO8_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO9_U (REG_IO_MUX_BASE +0x28)
|
|
#define FUNC_GPIO9_GPIO9 1
|
|
#define FUNC_GPIO9_GPIO9_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO10_U (REG_IO_MUX_BASE +0x2c)
|
|
#define FUNC_GPIO10_FSPICS0 2
|
|
#define FUNC_GPIO10_GPIO10 1
|
|
#define FUNC_GPIO10_GPIO10_0 0
|
|
|
|
#define PERIPHS_IO_MUX_VDD_SPI_U (REG_IO_MUX_BASE +0x30)
|
|
#define FUNC_VDD_SPI_GPIO11 1
|
|
#define FUNC_VDD_SPI_GPIO11_0 0
|
|
|
|
#define PERIPHS_IO_MUX_SPIHD_U (REG_IO_MUX_BASE +0x34)
|
|
#define FUNC_SPIHD_GPIO12 1
|
|
#define FUNC_SPIHD_SPIHD 0
|
|
|
|
#define PERIPHS_IO_MUX_SPIWP_U (REG_IO_MUX_BASE +0x38)
|
|
#define FUNC_SPIWP_GPIO13 1
|
|
#define FUNC_SPIWP_SPIWP 0
|
|
|
|
#define PERIPHS_IO_MUX_SPICS0_U (REG_IO_MUX_BASE +0x3c)
|
|
#define FUNC_SPICS0_GPIO14 1
|
|
#define FUNC_SPICS0_SPICS0 0
|
|
|
|
#define PERIPHS_IO_MUX_SPICLK_U (REG_IO_MUX_BASE +0x40)
|
|
#define FUNC_SPICLK_GPIO15 1
|
|
#define FUNC_SPICLK_SPICLK 0
|
|
|
|
#define PERIPHS_IO_MUX_SPID_U (REG_IO_MUX_BASE +0x44)
|
|
#define FUNC_SPID_GPIO16 1
|
|
#define FUNC_SPID_SPID 0
|
|
|
|
#define PERIPHS_IO_MUX_SPIQ_U (REG_IO_MUX_BASE +0x48)
|
|
#define FUNC_SPIQ_GPIO17 1
|
|
#define FUNC_SPIQ_SPIQ 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO18_U (REG_IO_MUX_BASE +0x4c)
|
|
#define FUNC_GPIO18_GPIO18 1
|
|
#define FUNC_GPIO18_GPIO18_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO19_U (REG_IO_MUX_BASE +0x50)
|
|
#define FUNC_GPIO19_GPIO19 1
|
|
#define FUNC_GPIO19_GPIO19_0 0
|
|
|
|
#define PERIPHS_IO_MUX_U0RXD_U (REG_IO_MUX_BASE +0x54)
|
|
#define FUNC_U0RXD_GPIO20 1
|
|
#define FUNC_U0RXD_U0RXD 0
|
|
|
|
#define PERIPHS_IO_MUX_U0TXD_U (REG_IO_MUX_BASE +0x58)
|
|
#define FUNC_U0TXD_GPIO21 1
|
|
#define FUNC_U0TXD_U0TXD 0
|
|
|
|
#define IO_MUX_DATE_REG (REG_IO_MUX_BASE + 0xfc)
|
|
#define IO_MUX_DATE 0xFFFFFFFF
|
|
#define IO_MUX_DATE_S 0
|
|
#define IO_MUX_DATE_VERSION 0x2006050
|
|
|
|
#endif
|