alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
6cbb5af66e
esp-idf/components/bt/host/bluedroid/stack/include/stack/l2c_api.h

1271 lines
48 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* this file contains the L2CAP API definitions
*
******************************************************************************/
#ifndef L2C_API_H
#define L2C_API_H
#include <stdbool.h>
#include "common/bt_target.h"
#include "stack/l2cdefs.h"
#include "stack/hcidefs.h"
#include "osi/fixed_queue.h"
/*****************************************************************************
** Constants
*****************************************************************************/
/* Define the minimum offset that L2CAP needs in a buffer. This is made up of
** HCI type(1), len(2), handle(2), L2CAP len(2) and CID(2) => 9
*/
#define L2CAP_MIN_OFFSET 13 /* plus control(2), SDU length(2) */
#define L2CAP_FCS_LEN 2 /* FCS 0 or 2 bytes */
/* Minimum offset for broadcast needs another two bytes for the PSM */
#define L2CAP_BCST_MIN_OFFSET 11
/* ping result codes */
#define L2CAP_PING_RESULT_OK 0 /* Ping reply received OK */
#define L2CAP_PING_RESULT_NO_LINK 1 /* Link could not be setup */
#define L2CAP_PING_RESULT_NO_RESP 2 /* Remote L2CAP did not reply */
/* result code for L2CA_DataWrite() */
#define L2CAP_DW_FAILED FALSE
#define L2CAP_DW_SUCCESS TRUE
#define L2CAP_DW_CONGESTED 2
/* Values for priority parameter to L2CA_SetAclPriority */
#define L2CAP_PRIORITY_NORMAL 0
#define L2CAP_PRIORITY_HIGH 1
/* Values for priority parameter to L2CA_SetTxPriority */
#define L2CAP_CHNL_PRIORITY_HIGH 0
#define L2CAP_CHNL_PRIORITY_MEDIUM 1
#define L2CAP_CHNL_PRIORITY_LOW 2
typedef UINT8 tL2CAP_CHNL_PRIORITY;
/* Values for Tx/Rx data rate parameter to L2CA_SetChnlDataRate */
#define L2CAP_CHNL_DATA_RATE_HIGH 3
#define L2CAP_CHNL_DATA_RATE_MEDIUM 2
#define L2CAP_CHNL_DATA_RATE_LOW 1
#define L2CAP_CHNL_DATA_RATE_NO_TRAFFIC 0
typedef UINT8 tL2CAP_CHNL_DATA_RATE;
/* Data Packet Flags (bits 2-15 are reserved) */
/* layer specific 14-15 bits are used for FCR SAR */
#define L2CAP_FLUSHABLE_MASK 0x0003
#define L2CAP_FLUSHABLE_CH_BASED 0x0000
#define L2CAP_FLUSHABLE_PKT 0x0001
#define L2CAP_NON_FLUSHABLE_PKT 0x0002
/* L2CA_FlushChannel num_to_flush definitions */
#define L2CAP_FLUSH_CHANS_ALL 0xffff
#define L2CAP_FLUSH_CHANS_GET 0x0000
/* special CID for Multi-AV for reporting congestion */
#define L2CAP_MULTI_AV_CID 0
/* length of the HCI header block */
/* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) */
#define L2CAP_MULTI_AV_HCI_HDR_LEN 8
/* length of padding for 4 bytes align */
#define L2CAP_MULTI_AV_PADDING_LEN 2
/* length of the HCI header block with padding for FCR */
/* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) + padding(2) */
#define L2CAP_MULTI_AV_HCI_HDR_LEN_WITH_PADDING 10
/* length of the L2CAP header block */
/* HCI header(4) + L2CAP header(4) + padding(4) or control word(2) + FCS(2) */
#define L2CAP_MULTI_AV_L2C_HDR_LEN 12
/* definition used for L2CA_SetDesireRole */
#define L2CAP_ROLE_SLAVE HCI_ROLE_SLAVE
#define L2CAP_ROLE_MASTER HCI_ROLE_MASTER
#define L2CAP_ROLE_ALLOW_SWITCH 0x80 /* set this bit to allow switch at create conn */
#define L2CAP_ROLE_DISALLOW_SWITCH 0x40 /* set this bit to disallow switch at create conn */
#define L2CAP_ROLE_CHECK_SWITCH 0xC0
/* Values for 'allowed_modes' field passed in structure tL2CAP_ERTM_INFO
*/
#define L2CAP_FCR_CHAN_OPT_BASIC (1 << L2CAP_FCR_BASIC_MODE)
#define L2CAP_FCR_CHAN_OPT_ERTM (1 << L2CAP_FCR_ERTM_MODE)
#define L2CAP_FCR_CHAN_OPT_STREAM (1 << L2CAP_FCR_STREAM_MODE)
#define L2CAP_FCR_CHAN_OPT_ALL_MASK (L2CAP_FCR_CHAN_OPT_BASIC | L2CAP_FCR_CHAN_OPT_ERTM | L2CAP_FCR_CHAN_OPT_STREAM)
/* Validity check for PSM. PSM values must be odd. Also, all PSM values must
** be assigned such that the least significant bit of the most sigificant
** octet equals zero.
*/
#define L2C_INVALID_PSM(psm) (((psm) & 0x0101) != 0x0001)
#define L2C_IS_VALID_PSM(psm) (((psm) & 0x0101) == 0x0001)
#define L2C_IS_VALID_LE_PSM(psm) (((psm) > 0x0000) && ((psm) < 0x0100))
/*****************************************************************************
** Type Definitions
*****************************************************************************/
typedef struct {
#define L2CAP_FCR_BASIC_MODE 0x00
#define L2CAP_FCR_ERTM_MODE 0x03
#define L2CAP_FCR_STREAM_MODE 0x04
UINT8 mode;
UINT8 tx_win_sz;
UINT8 max_transmit;
UINT16 rtrans_tout;
UINT16 mon_tout;
UINT16 mps;
} tL2CAP_FCR_OPTS;
/* Define a structure to hold the configuration parameters. Since the
** parameters are optional, for each parameter there is a boolean to
** use to signify its presence or absence.
*/
typedef struct {
UINT16 result; /* Only used in confirm messages */
BOOLEAN mtu_present;
UINT16 mtu;
BOOLEAN qos_present;
FLOW_SPEC qos;
BOOLEAN flush_to_present;
UINT16 flush_to;
BOOLEAN fcr_present;
tL2CAP_FCR_OPTS fcr;
BOOLEAN fcs_present; /* Optionally bypasses FCS checks */
UINT8 fcs; /* '0' if desire is to bypass FCS, otherwise '1' */
BOOLEAN ext_flow_spec_present;
tHCI_EXT_FLOW_SPEC ext_flow_spec;
UINT16 flags; /* bit 0: 0-no continuation, 1-continuation */
} tL2CAP_CFG_INFO;
/* Define a structure to hold the configuration parameter for LE L2CAP connection
** oriented channels.
*/
typedef struct
{
UINT16 mtu;
UINT16 mps;
UINT16 credits;
} tL2CAP_LE_CFG_INFO;
/* L2CAP channel configured field bitmap */
#define L2CAP_CH_CFG_MASK_MTU 0x0001
#define L2CAP_CH_CFG_MASK_QOS 0x0002
#define L2CAP_CH_CFG_MASK_FLUSH_TO 0x0004
#define L2CAP_CH_CFG_MASK_FCR 0x0008
#define L2CAP_CH_CFG_MASK_FCS 0x0010
#define L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC 0x0020
typedef UINT16 tL2CAP_CH_CFG_BITS;
/*********************************
** Callback Functions Prototypes
**********************************/
/* Connection indication callback prototype. Parameters are
** BD Address of remote
** Local CID assigned to the connection
** PSM that the remote wants to connect to
** Identifier that the remote sent
*/
typedef void (tL2CA_CONNECT_IND_CB) (BD_ADDR, UINT16, UINT16, UINT8);
/* Connection confirmation callback prototype. Parameters are
** Local CID
** Result - 0 = connected, non-zero means failure reason
*/
typedef void (tL2CA_CONNECT_CFM_CB) (UINT16, UINT16);
/* Connection pending callback prototype. Parameters are
** Local CID
*/
typedef void (tL2CA_CONNECT_PND_CB) (UINT16);
/* Configuration indication callback prototype. Parameters are
** Local CID assigned to the connection
** Pointer to configuration info
*/
typedef void (tL2CA_CONFIG_IND_CB) (UINT16, tL2CAP_CFG_INFO *);
/* Configuration confirm callback prototype. Parameters are
** Local CID assigned to the connection
** Pointer to configuration info
*/
typedef void (tL2CA_CONFIG_CFM_CB) (UINT16, tL2CAP_CFG_INFO *);
/* Disconnect indication callback prototype. Parameters are
** Local CID
** Boolean whether upper layer should ack this
*/
typedef void (tL2CA_DISCONNECT_IND_CB) (UINT16, BOOLEAN);
/* Disconnect confirm callback prototype. Parameters are
** Local CID
** Result
*/
typedef void (tL2CA_DISCONNECT_CFM_CB) (UINT16, UINT16);
/* QOS Violation indication callback prototype. Parameters are
** BD Address of violating device
*/
typedef void (tL2CA_QOS_VIOLATION_IND_CB) (BD_ADDR);
/* Data received indication callback prototype. Parameters are
** Local CID
** Address of buffer
*/
typedef void (tL2CA_DATA_IND_CB) (UINT16, BT_HDR *);
/* Echo response callback prototype. Note that this is not included in the
** registration information, but is passed to L2CAP as part of the API to
** actually send an echo request. Parameters are
** Result
*/
typedef void (tL2CA_ECHO_RSP_CB) (UINT16);
/* Callback function prototype to pass broadcom specific echo response */
/* to the upper layer */
typedef void (tL2CA_ECHO_DATA_CB) (BD_ADDR, UINT16, UINT8 *);
/* Congestion status callback protype. This callback is optional. If
** an application tries to send data when the transmit queue is full,
** the data will anyways be dropped. The parameter is:
** Local CID
** TRUE if congested, FALSE if uncongested
*/
typedef void (tL2CA_CONGESTION_STATUS_CB) (UINT16, BOOLEAN);
/* Callback prototype for number of packets completed events.
** This callback notifies the application when Number of Completed Packets
** event has been received.
** This callback is originally designed for 3DG devices.
** The parameter is:
** peer BD_ADDR
*/
typedef void (tL2CA_NOCP_CB) (BD_ADDR);
/* Transmit complete callback protype. This callback is optional. If
** set, L2CAP will call it when packets are sent or flushed. If the
** count is 0xFFFF, it means all packets are sent for that CID (eRTM
** mode only). The parameters are:
** Local CID
** Number of SDUs sent or dropped
*/
typedef void (tL2CA_TX_COMPLETE_CB) (UINT16, UINT16);
/* Define the structure that applications use to register with
** L2CAP. This structure includes callback functions. All functions
** MUST be provided, with the exception of the "connect pending"
** callback and "congestion status" callback.
*/
typedef struct {
tL2CA_CONNECT_IND_CB *pL2CA_ConnectInd_Cb;
tL2CA_CONNECT_CFM_CB *pL2CA_ConnectCfm_Cb;
tL2CA_CONNECT_PND_CB *pL2CA_ConnectPnd_Cb;
tL2CA_CONFIG_IND_CB *pL2CA_ConfigInd_Cb;
tL2CA_CONFIG_CFM_CB *pL2CA_ConfigCfm_Cb;
tL2CA_DISCONNECT_IND_CB *pL2CA_DisconnectInd_Cb;
tL2CA_DISCONNECT_CFM_CB *pL2CA_DisconnectCfm_Cb;
tL2CA_QOS_VIOLATION_IND_CB *pL2CA_QoSViolationInd_Cb;
tL2CA_DATA_IND_CB *pL2CA_DataInd_Cb;
tL2CA_CONGESTION_STATUS_CB *pL2CA_CongestionStatus_Cb;
tL2CA_TX_COMPLETE_CB *pL2CA_TxComplete_Cb;
} tL2CAP_APPL_INFO;
/* Define the structure that applications use to create or accept
** connections with enhanced retransmission mode.
*/
typedef struct {
UINT8 preferred_mode;
UINT8 allowed_modes;
UINT16 user_rx_buf_size;
UINT16 user_tx_buf_size;
UINT16 fcr_rx_buf_size;
UINT16 fcr_tx_buf_size;
} tL2CAP_ERTM_INFO;
#define L2CA_REGISTER(a,b,c) L2CA_Register(a,(tL2CAP_APPL_INFO *)b)
#define L2CA_DEREGISTER(a) L2CA_Deregister(a)
#define L2CA_CONNECT_REQ(a,b,c,d) L2CA_ErtmConnectReq(a,b,c)
#define L2CA_CONNECT_RSP(a,b,c,d,e,f,g) L2CA_ErtmConnectRsp(a,b,c,d,e,f)
#define L2CA_CONFIG_REQ(a,b) L2CA_ConfigReq(a,b)
#define L2CA_CONFIG_RSP(a,b) L2CA_ConfigRsp(a,b)
#define L2CA_DISCONNECT_REQ(a) L2CA_DisconnectReq(a)
#define L2CA_DISCONNECT_RSP(a) L2CA_DisconnectRsp(a)
#define L2CA_DATA_WRITE(a, b) L2CA_DataWrite(a, b)
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
#if (CLASSIC_BT_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_Register
**
** Description Other layers call this function to register for L2CAP
** services.
**
** Returns PSM to use or zero if error. Typically, the PSM returned
** is the same as was passed in, but for an outgoing-only
** connection to a dynamic PSM, a "virtual" PSM is returned
** and should be used in the calls to L2CA_ConnectReq() and
** BTM_SetSecurityLevel().
**
*******************************************************************************/
extern UINT16 L2CA_Register (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info);
/*******************************************************************************
**
** Function L2CA_Deregister
**
** Description Other layers call this function to deregister for L2CAP
** services.
**
** Returns void
**
*******************************************************************************/
extern void L2CA_Deregister (UINT16 psm);
/*******************************************************************************
**
** Function L2CA_AllocatePSM
**
** Description Other layers call this function to find an unused PSM for L2CAP
** services.
**
** Returns PSM to use.
**
*******************************************************************************/
extern UINT16 L2CA_AllocatePSM(void);
/*******************************************************************************
**
** Function L2CA_ConnectReq
**
** Description Higher layers call this function to create an L2CAP connection.
** Note that the connection is not established at this time, but
** connection establishment gets started. The callback function
** will be invoked when connection establishes or fails.
**
** Returns the CID of the connection, or 0 if it failed to start
**
*******************************************************************************/
extern UINT16 L2CA_ConnectReq (UINT16 psm, BD_ADDR p_bd_addr);
/*******************************************************************************
**
** Function L2CA_ConnectRsp
**
** Description Higher layers call this function to accept an incoming
** L2CAP connection, for which they had gotten an connect
** indication callback.
**
** Returns TRUE for success, FALSE for failure
**
*******************************************************************************/
extern BOOLEAN L2CA_ConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid,
UINT16 result, UINT16 status);
/*******************************************************************************
**
** Function L2CA_ErtmConnectReq
**
** Description Higher layers call this function to create an L2CAP connection
** that needs to use Enhanced Retransmission Mode.
** Note that the connection is not established at this time, but
** connection establishment gets started. The callback function
** will be invoked when connection establishes or fails.
**
** Returns the CID of the connection, or 0 if it failed to start
**
*******************************************************************************/
extern UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr,
tL2CAP_ERTM_INFO *p_ertm_info);
// This function sets the callback routines for the L2CAP connection referred to by
// |local_cid|. The callback routines can only be modified for outgoing connections
// established by |L2CA_ConnectReq| or accepted incoming connections. |callbacks|
// must not be NULL. This function returns true if the callbacks could be updated,
// false if not (e.g. |local_cid| was not found).
bool L2CA_SetConnectionCallbacks(uint16_t local_cid, const tL2CAP_APPL_INFO *callbacks);
/*******************************************************************************
**
** Function L2CA_ErtmConnectRsp
**
** Description Higher layers call this function to accept an incoming
** L2CAP connection, for which they had gotten an connect
** indication callback, and for which the higher layer wants
** to use Enhanced Retransmission Mode.
**
** Returns TRUE for success, FALSE for failure
**
*******************************************************************************/
extern BOOLEAN L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid,
UINT16 result, UINT16 status,
tL2CAP_ERTM_INFO *p_ertm_info);
/*******************************************************************************
**
** Function L2CA_ConfigReq
**
** Description Higher layers call this function to send configuration.
**
** Returns TRUE if configuration sent, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_ConfigReq (UINT16 cid, tL2CAP_CFG_INFO *p_cfg);
/*******************************************************************************
**
** Function L2CA_ConfigRsp
**
** Description Higher layers call this function to send a configuration
** response.
**
** Returns TRUE if configuration response sent, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_ConfigRsp (UINT16 cid, tL2CAP_CFG_INFO *p_cfg);
/*******************************************************************************
**
** Function L2CA_DisconnectReq
**
** Description Higher layers call this function to disconnect a channel.
**
** Returns TRUE if disconnect sent, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_DisconnectReq (UINT16 cid);
/*******************************************************************************
**
** Function L2CA_DisconnectRsp
**
** Description Higher layers call this function to acknowledge the
** disconnection of a channel.
**
** Returns void
**
*******************************************************************************/
extern BOOLEAN L2CA_DisconnectRsp (UINT16 cid);
#endif ///CLASSIC_BT_INCLUDED == TRUE
#if (BLE_L2CAP_COC_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_RegisterLECoc
**
** Description Other layers call this function to register for L2CAP
** Connection Oriented Channel.
**
** Returns PSM to use or zero if error. Typically, the PSM returned
** is the same as was passed in, but for an outgoing-only
** connection to a dynamic PSM, a "virtual" PSM is returned
** and should be used in the calls to L2CA_ConnectLECocReq()
** and BTM_SetSecurityLevel().
**
*******************************************************************************/
extern UINT16 L2CA_RegisterLECoc (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info);
/*******************************************************************************
**
** Function L2CA_DeregisterLECoc
**
** Description Other layers call this function to deregister for L2CAP
** Connection Oriented Channel.
**
** Returns void
**
*******************************************************************************/
extern void L2CA_DeregisterLECoc (UINT16 psm);
/*******************************************************************************
**
** Function L2CA_ConnectLECocReq
**
** Description Higher layers call this function to create an L2CAP LE COC.
** Note that the connection is not established at this time, but
** connection establishment gets started. The callback function
** will be invoked when connection establishes or fails.
**
** Returns the CID of the connection, or 0 if it failed to start
**
*******************************************************************************/
extern UINT16 L2CA_ConnectLECocReq (UINT16 psm, BD_ADDR p_bd_addr, tL2CAP_LE_CFG_INFO *p_cfg);
/*******************************************************************************
**
** Function L2CA_ConnectLECocRsp
**
** Description Higher layers call this function to accept an incoming
** L2CAP LE COC connection, for which they had gotten an connect
** indication callback.
**
** Returns TRUE for success, FALSE for failure
**
*******************************************************************************/
extern BOOLEAN L2CA_ConnectLECocRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, UINT16 result,
UINT16 status, tL2CAP_LE_CFG_INFO *p_cfg);
/*******************************************************************************
**
** Function L2CA_GetPeerLECocConfig
**
** Description Get peers configuration for LE Connection Oriented Channel.
**
** Return value: TRUE if peer is connected
**
*******************************************************************************/
extern BOOLEAN L2CA_GetPeerLECocConfig (UINT16 lcid, tL2CAP_LE_CFG_INFO* peer_cfg);
#endif // (BLE_L2CAP_COC_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_DataWrite
**
** Description Higher layers call this function to write data.
**
** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE
** L2CAP_DW_CONGESTED, if data accepted and the channel is congested
** L2CAP_DW_FAILED, if error
**
*******************************************************************************/
extern UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data);
#if (CLASSIC_BT_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_Ping
**
** Description Higher layers call this function to send an echo request.
**
** Returns TRUE if echo request sent, else FALSE.
**
*******************************************************************************/
extern BOOLEAN L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_cb);
/*******************************************************************************
**
** Function L2CA_Echo
**
** Description Higher layers call this function to send an echo request
** with application-specific data.
**
** Returns TRUE if echo request sent, else FALSE.
**
*******************************************************************************/
extern BOOLEAN L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback);
#endif ///CLASSIC_BT_INCLUDED == TRUE
// Given a local channel identifier, |lcid|, this function returns the bound remote
// channel identifier, |rcid|, and the ACL link handle, |handle|. If |lcid| is not
// known or is invalid, this function returns false and does not modify the values
// pointed at by |rcid| and |handle|. |rcid| and |handle| may be NULL.
bool L2CA_GetIdentifiers(uint16_t lcid, uint16_t *rcid, uint16_t *handle);
/*******************************************************************************
**
** Function L2CA_SetIdleTimeout
**
** Description Higher layers call this function to set the idle timeout for
** a connection, or for all future connections. The "idle timeout"
** is the amount of time that a connection can remain up with
** no L2CAP channels on it. A timeout of zero means that the
** connection will be torn down immediately when the last channel
** is removed. A timeout of 0xFFFF means no timeout. Values are
** in seconds.
**
** Returns TRUE if command succeeded, FALSE if failed
**
*******************************************************************************/
extern BOOLEAN L2CA_SetIdleTimeout (UINT16 cid, UINT16 timeout,
BOOLEAN is_global);
/*******************************************************************************
**
** Function L2CA_SetIdleTimeoutByBdAddr
**
** Description Higher layers call this function to set the idle timeout for
** a connection. The "idle timeout" is the amount of time that
** a connection can remain up with no L2CAP channels on it.
** A timeout of zero means that the connection will be torn
** down immediately when the last channel is removed.
** A timeout of 0xFFFF means no timeout. Values are in seconds.
** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY,
** then the idle timeouts for all active l2cap links will be
** changed.
**
** Returns TRUE if command succeeded, FALSE if failed
**
** NOTE This timeout applies to all logical channels active on the
** ACL link.
*******************************************************************************/
extern BOOLEAN L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, UINT16 timeout,
tBT_TRANSPORT transport);
/*******************************************************************************
**
** Function L2CA_SetTraceLevel
**
** Description This function sets the trace level for L2CAP. If called with
** a value of 0xFF, it simply reads the current trace level.
**
** Returns the new (current) trace level
**
*******************************************************************************/
extern UINT8 L2CA_SetTraceLevel (UINT8 trace_level);
/*******************************************************************************
**
** Function L2CA_SetDesireRole
**
** Description This function sets the desire role for L2CAP.
** If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on
** HciCreateConnection.
** If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on
** HciCreateConnection.
**
** If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE),
** the desire role is set to the new value. Otherwise, it is not changed.
**
** Returns the new (current) role
**
*******************************************************************************/
extern UINT8 L2CA_SetDesireRole (UINT8 new_role);
#if (CLASSIC_BT_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_LocalLoopbackReq
**
** Description This function sets up a CID for local loopback
**
** Returns CID of 0 if none.
**
*******************************************************************************/
extern UINT16 L2CA_LocalLoopbackReq (UINT16 psm, UINT16 handle, BD_ADDR p_bd_addr);
/*******************************************************************************
**
** Function L2CA_FlushChannel
**
** Description This function flushes none, some or all buffers queued up
** for xmission for a particular CID. If called with
** L2CAP_FLUSH_CHANS_GET (0), it simply returns the number
** of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff)
** flushes all buffers. All other values specifies the maximum
** buffers to flush.
**
** Returns Number of buffers left queued for that CID
**
*******************************************************************************/
extern UINT16 L2CA_FlushChannel (UINT16 lcid, UINT16 num_to_flush);
/*******************************************************************************
**
** Function L2CA_SetAclPriority
**
** Description Sets the transmission priority for an ACL channel.
** (For initial implementation only two values are valid.
** L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH).
**
** Returns TRUE if a valid channel, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_SetAclPriority (BD_ADDR bd_addr, UINT8 priority);
/*******************************************************************************
**
** Function L2CA_FlowControl
**
** Description Higher layers call this function to flow control a channel.
**
** data_enabled - TRUE data flows, FALSE data is stopped
**
** Returns TRUE if valid channel, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_FlowControl (UINT16 cid, BOOLEAN data_enabled);
/*******************************************************************************
**
** Function L2CA_SendTestSFrame
**
** Description Higher layers call this function to send a test S-frame.
**
** Returns TRUE if valid Channel, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_SendTestSFrame (UINT16 cid, UINT8 sup_type,
UINT8 back_track);
/*******************************************************************************
**
** Function L2CA_SetTxPriority
**
** Description Sets the transmission priority for a channel. (FCR Mode)
**
** Returns TRUE if a valid channel, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_SetTxPriority (UINT16 cid, tL2CAP_CHNL_PRIORITY priority);
/*******************************************************************************
**
** Function L2CA_RegForNoCPEvt
**
** Description Register callback for Number of Completed Packets event.
**
** Input Param p_cb - callback for Number of completed packets event
** p_bda - BT address of remote device
**
** Returns
**
*******************************************************************************/
extern BOOLEAN L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda);
/*******************************************************************************
**
** Function L2CA_SetChnlDataRate
**
** Description Sets the tx/rx data rate for a channel.
**
** Returns TRUE if a valid channel, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_SetChnlDataRate (UINT16 cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx);
typedef void (tL2CA_RESERVE_CMPL_CBACK) (void);
/*******************************************************************************
**
** Function L2CA_SetFlushTimeout
**
** Description This function set the automatic flush time out in Baseband
** for ACL-U packets.
** BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY
** then the flush time out will be applied to all ACL link.
** FlushTimeout: flush time out in ms
** 0x0000 : No automatic flush
** L2CAP_NO_RETRANSMISSION : No retransmission
** 0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5)
** <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot).
** Otherwise, return FALSE.
** L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush
**
** Returns TRUE if command succeeded, FALSE if failed
**
** NOTE This flush timeout applies to all logical channels active on the
** ACL link.
*******************************************************************************/
extern BOOLEAN L2CA_SetFlushTimeout (BD_ADDR bd_addr, UINT16 flush_tout);
#endif ///CLASSIC_BT_INCLUDED == TRUE
/*******************************************************************************
**
** Function L2CA_DataWriteEx
**
** Description Higher layers call this function to write data with extended
** flags.
** flags : L2CAP_FLUSHABLE_CH_BASED
** L2CAP_FLUSHABLE_PKT
** L2CAP_NON_FLUSHABLE_PKT
**
** Returns L2CAP_DW_SUCCESS, if data accepted, else FALSE
** L2CAP_DW_CONGESTED, if data accepted and the channel is congested
** L2CAP_DW_FAILED, if error
**
*******************************************************************************/
extern UINT8 L2CA_DataWriteEx (UINT16 cid, BT_HDR *p_data, UINT16 flags);
/*******************************************************************************
**
** Function L2CA_SetChnlFlushability
**
** Description Higher layers call this function to set a channels
** flushability flags
**
** Returns TRUE if CID found, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_SetChnlFlushability (UINT16 cid, BOOLEAN is_flushable);
/*******************************************************************************
**
** Function L2CA_GetPeerFeatures
**
** Description Get a peers features and fixed channel map
**
** Parameters: BD address of the peer
** Pointers to features and channel mask storage area
**
** Return value: TRUE if peer is connected
**
*******************************************************************************/
extern BOOLEAN L2CA_GetPeerFeatures (BD_ADDR bd_addr, UINT32 *p_ext_feat, UINT8 *p_chnl_mask);
/*******************************************************************************
**
** Function L2CA_GetBDAddrbyHandle
**
** Description Get BD address for the given HCI handle
**
** Parameters: HCI handle
** BD address of the peer
**
** Return value: TRUE if found lcb for the given handle, FALSE otherwise
**
*******************************************************************************/
extern BOOLEAN L2CA_GetBDAddrbyHandle (UINT16 handle, BD_ADDR bd_addr);
#if (CLASSIC_BT_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_GetChnlFcrMode
**
** Description Get the channel FCR mode
**
** Parameters: Local CID
**
** Return value: Channel mode
**
*******************************************************************************/
extern UINT8 L2CA_GetChnlFcrMode (UINT16 lcid);
#endif ///CLASSIC_BT_INCLUDED == TRUE
/*******************************************************************************
**
** UCD callback prototypes
**
*******************************************************************************/
/* UCD discovery. Parameters are
** BD Address of remote
** Data Type
** Data
*/
#define L2CAP_UCD_INFO_TYPE_RECEPTION 0x01
#define L2CAP_UCD_INFO_TYPE_MTU 0x02
typedef void (tL2CA_UCD_DISCOVER_CB) (BD_ADDR, UINT8, UINT32);
/* UCD data received. Parameters are
** BD Address of remote
** Pointer to buffer with data
*/
typedef void (tL2CA_UCD_DATA_CB) (BD_ADDR, BT_HDR *);
/* Congestion status callback protype. This callback is optional. If
** an application tries to send data when the transmit queue is full,
** the data will anyways be dropped. The parameter is:
** remote BD_ADDR
** TRUE if congested, FALSE if uncongested
*/
typedef void (tL2CA_UCD_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN);
/* UCD registration info (the callback addresses and PSM)
*/
typedef struct {
tL2CA_UCD_DISCOVER_CB *pL2CA_UCD_Discover_Cb;
tL2CA_UCD_DATA_CB *pL2CA_UCD_Data_Cb;
tL2CA_UCD_CONGESTION_STATUS_CB *pL2CA_UCD_Congestion_Status_Cb;
} tL2CAP_UCD_CB_INFO;
/*******************************************************************************
**
** Function L2CA_UcdRegister
**
** Description Register PSM on UCD.
**
** Parameters: tL2CAP_UCD_CB_INFO
**
** Return value: TRUE if successs
**
*******************************************************************************/
extern BOOLEAN L2CA_UcdRegister ( UINT16 psm, tL2CAP_UCD_CB_INFO *p_cb_info );
/*******************************************************************************
**
** Function L2CA_UcdDeregister
**
** Description Deregister PSM on UCD.
**
** Parameters: PSM
**
** Return value: TRUE if successs
**
*******************************************************************************/
extern BOOLEAN L2CA_UcdDeregister ( UINT16 psm );
/*******************************************************************************
**
** Function L2CA_UcdDiscover
**
** Description Discover UCD of remote device.
**
** Parameters: PSM
** BD_ADDR of remote device
** info_type : L2CAP_UCD_INFO_TYPE_RECEPTION
** L2CAP_UCD_INFO_TYPE_MTU
**
**
** Return value: TRUE if successs
**
*******************************************************************************/
extern BOOLEAN L2CA_UcdDiscover ( UINT16 psm, BD_ADDR rem_bda, UINT8 info_type );
/*******************************************************************************
**
** Function L2CA_UcdDataWrite
**
** Description Send UCD to remote device
**
** Parameters: PSM
** BD Address of remote
** Pointer to buffer of type BT_HDR
** flags : L2CAP_FLUSHABLE_CH_BASED
** L2CAP_FLUSHABLE_PKT
** L2CAP_NON_FLUSHABLE_PKT
**
** Return value L2CAP_DW_SUCCESS, if data accepted
** L2CAP_DW_FAILED, if error
**
*******************************************************************************/
extern UINT16 L2CA_UcdDataWrite (UINT16 psm, BD_ADDR rem_bda, BT_HDR *p_buf, UINT16 flags);
/*******************************************************************************
**
** Function L2CA_UcdSetIdleTimeout
**
** Description Set UCD Idle timeout.
**
** Parameters: BD Addr
** Timeout in second
**
** Return value: TRUE if successs
**
*******************************************************************************/
extern BOOLEAN L2CA_UcdSetIdleTimeout ( BD_ADDR rem_bda, UINT16 timeout );
/*******************************************************************************
**
** Function L2CA_UCDSetTxPriority
**
** Description Sets the transmission priority for a connectionless channel.
**
** Returns TRUE if a valid channel, else FALSE
**
*******************************************************************************/
extern BOOLEAN L2CA_UCDSetTxPriority ( BD_ADDR rem_bda, tL2CAP_CHNL_PRIORITY priority );
/*******************************************************************************
**
** Fixed Channel callback prototypes
**
*******************************************************************************/
/* Fixed channel connected and disconnected. Parameters are
** channel
** BD Address of remote
** TRUE if channel is connected, FALSE if disconnected
** Reason for connection failure
** transport : physical transport, BR/EDR or LE
*/
typedef void (tL2CA_FIXED_CHNL_CB) (UINT16, BD_ADDR, BOOLEAN, UINT16, tBT_TRANSPORT);
/* Signalling data received. Parameters are
** channel
** BD Address of remote
** Pointer to buffer with data
*/
typedef void (tL2CA_FIXED_DATA_CB) (UINT16, BD_ADDR, BT_HDR *);
/* Congestion status callback protype. This callback is optional. If
** an application tries to send data when the transmit queue is full,
** the data will anyways be dropped. The parameter is:
** remote BD_ADDR
** TRUE if congested, FALSE if uncongested
*/
typedef void (tL2CA_FIXED_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN);
/* Fixed channel registration info (the callback addresses and channel config)
*/
typedef struct {
tL2CA_FIXED_CHNL_CB *pL2CA_FixedConn_Cb;
tL2CA_FIXED_DATA_CB *pL2CA_FixedData_Cb;
tL2CA_FIXED_CONGESTION_STATUS_CB *pL2CA_FixedCong_Cb;
tL2CAP_FCR_OPTS fixed_chnl_opts;
UINT16 default_idle_tout;
tL2CA_TX_COMPLETE_CB *pL2CA_FixedTxComplete_Cb; /* fixed channel tx complete callback */
} tL2CAP_FIXED_CHNL_REG;
#if (L2CAP_NUM_FIXED_CHNLS > 0)
/*******************************************************************************
**
** Function L2CA_RegisterFixedChannel
**
** Description Register a fixed channel.
**
** Parameters: Fixed Channel #
** Channel Callbacks and config
**
** Return value: TRUE if registered OK
**
*******************************************************************************/
extern BOOLEAN L2CA_RegisterFixedChannel (UINT16 fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg);
/*******************************************************************************
**
** Function L2CA_ConnectFixedChnl
**
** Description Connect an fixed signalling channel to a remote device.
**
** Parameters: Fixed CID
** BD Address of remote
** BD Address type
**
** Return value: TRUE if connection started
**
*******************************************************************************/
extern BOOLEAN L2CA_ConnectFixedChnl (UINT16 fixed_cid, BD_ADDR bd_addr, tBLE_ADDR_TYPE bd_addr_type, BOOLEAN is_aux);
/*******************************************************************************
**
** Function L2CA_SendFixedChnlData
**
** Description Write data on a fixed signalling channel.
**
** Parameters: Fixed CID
** BD Address of remote
** Pointer to buffer of type BT_HDR
**
** Return value L2CAP_DW_SUCCESS, if data accepted
** L2CAP_DW_FAILED, if error
**
*******************************************************************************/
extern UINT16 L2CA_SendFixedChnlData (UINT16 fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf);
/*******************************************************************************
**
** Function L2CA_RemoveFixedChnl
**
** Description Remove a fixed channel to a remote device.
**
** Parameters: Fixed CID
** BD Address of remote
** Idle timeout to use (or 0xFFFF if don't care)
**
** Return value: TRUE if channel removed
**
*******************************************************************************/
extern BOOLEAN L2CA_RemoveFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda);
/*******************************************************************************
**
** Function L2CA_SetFixedChannelTout
**
** Description Higher layers call this function to set the idle timeout for
** a fixed channel. The "idle timeout" is the amount of time that
** a connection can remain up with no L2CAP channels on it.
** A timeout of zero means that the connection will be torn
** down immediately when the last channel is removed.
** A timeout of 0xFFFF means no timeout. Values are in seconds.
** A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY,
** then the idle timeouts for all active l2cap links will be
** changed.
**
** Returns TRUE if command succeeded, FALSE if failed
**
*******************************************************************************/
extern BOOLEAN L2CA_SetFixedChannelTout (BD_ADDR rem_bda, UINT16 fixed_cid, UINT16 idle_tout);
#endif /* (L2CAP_NUM_FIXED_CHNLS > 0) */
#if (CLASSIC_BT_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_GetCurrentConfig
**
** Description This function returns configurations of L2CAP channel
** pp_our_cfg : pointer of our saved configuration options
** p_our_cfg_bits : valid config in bitmap
** pp_peer_cfg: pointer of peer's saved configuration options
** p_peer_cfg_bits : valid config in bitmap
**
** Returns TRUE if successful
**
*******************************************************************************/
extern BOOLEAN L2CA_GetCurrentConfig (UINT16 lcid,
tL2CAP_CFG_INFO **pp_our_cfg, tL2CAP_CH_CFG_BITS *p_our_cfg_bits,
tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits);
#endif ///CLASSIC_BT_INCLUDED == TRUE
#if (BLE_INCLUDED == TRUE)
/*******************************************************************************
**
** Function L2CA_CancelBleConnectReq
**
** Description Cancel a pending connection attempt to a BLE device.
**
** Parameters: BD Address of remote
**
** Return value: TRUE if connection was cancelled
**
*******************************************************************************/
extern BOOLEAN L2CA_CancelBleConnectReq (BD_ADDR rem_bda);
/*******************************************************************************
**
** Function L2CA_UpdateBleConnParams
**
** Description Update BLE connection parameters.
**
** Parameters: BD Address of remote
**
** Return value: TRUE if update started
**
*******************************************************************************/
extern BOOLEAN L2CA_UpdateBleConnParams (BD_ADDR rem_bdRa, UINT16 min_int,
UINT16 max_int, UINT16 latency, UINT16 timeout);
/*******************************************************************************
**
** Function L2CA_EnableUpdateBleConnParams
**
** Description Update BLE connection parameters.
**
** Parameters: BD Address of remote
** enable flag
**
** Return value: TRUE if update started
**
*******************************************************************************/
extern BOOLEAN L2CA_EnableUpdateBleConnParams (BD_ADDR rem_bda, BOOLEAN enable);
/*******************************************************************************
**
** Function L2CA_GetBleConnRole
**
** Description This function returns the connection role.
**
** Returns link role.
**
*******************************************************************************/
extern UINT8 L2CA_GetBleConnRole (BD_ADDR bd_addr);
/*******************************************************************************
**
** Function L2CA_BleDisconnect
**
** Description This function use to disconnect LE connection.
**
** Parameters BD Address of remote
**
** Returns TRUE if disconnect successfully.
**
*******************************************************************************/
extern BOOLEAN L2CA_BleDisconnect (BD_ADDR rem_bda);
#endif /* (BLE_INCLUDED == TRUE) */
/*******************************************************************************
**
** Function L2CA_GetDisconnectReason
**
** Description This function returns the disconnect reason code.
**
** Parameters: BD Address of remote
** Physical transport for the L2CAP connection (BR/EDR or LE)
**
** Returns disconnect reason
**
*******************************************************************************/
extern UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda, tBT_TRANSPORT transport);
extern BOOLEAN L2CA_CheckIsCongest(UINT16 fixed_cid, BD_ADDR addr);
#define L2CA_GET_ATT_NUM 0
#define L2CA_ADD_BTC_NUM 1
#define L2CA_DECREASE_BTC_NUM 2
#define L2CA_ADD_BTU_NUM 3
#define L2CA_DECREASE_BTU_NUM 4
#define L2CA_BUFF_INI 5
#define L2CA_BUFF_DEINIT 6
#define L2CA_BUFF_FREE 7
typedef struct {
UINT16 conn_id;
UINT16 * get_num;
} tl2c_buff_param_t;
extern void l2ble_update_att_acl_pkt_num(UINT8 type, tl2c_buff_param_t *param);
#ifdef __cplusplus
}
#endif
#endif /* L2C_API_H */
Reference in New Issue View Git Blame Copy Permalink