esp-idf/components/bt/host/bluedroid/external/sbc/plc/sbc_plc.c
Angus Gratton 66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00

307 lines
8.8 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "common/bt_target.h"
#include "sbc_plc.h"
#if (PLC_INCLUDED == TRUE)
/* msbc */
static const uint8_t indices0[] = { 0xad, 0x00, 0x00, 0xc5, 0x00, 0x00, 0x00, 0x00, 0x77, 0x6d,
0xb6, 0xdd, 0xdb, 0x6d, 0xb7, 0x76, 0xdb, 0x6d, 0xdd, 0xb6, 0xdb, 0x77, 0x6d,
0xb6, 0xdd, 0xdb, 0x6d, 0xb7, 0x76, 0xdb, 0x6d, 0xdd, 0xb6, 0xdb, 0x77, 0x6d,
0xb6, 0xdd, 0xdb, 0x6d, 0xb7, 0x76, 0xdb, 0x6d, 0xdd, 0xb6, 0xdb, 0x77, 0x6d,
0xb6, 0xdd, 0xdb, 0x6d, 0xb7, 0x76, 0xdb, 0x6c};
/* 8 kHZ */
static const int16_t indices0_pcm[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
/* Raised COSine table for OLA */
/* 16 kHZ */
static float rcos[SBC_OLAL] = {
0.99148655f,0.96623611f,0.92510857f,0.86950446f,
0.80131732f,0.72286918f,0.63683150f,0.54613418f,
0.45386582f,0.36316850f,0.27713082f,0.19868268f,
0.13049554f,0.07489143f,0.03376389f,0.00851345f};
// /* 8 kHZ */
// static float rcos[SBC_OLAL] = {
// 0.96984631f,0.88302222f, 0.75f,0.58682409f,
// 0.41317591f, 0.25f,0.11697778f,0.09015369f};
static float SqrtByCarmack(const float x){
union {
int i;
float y;
} float_int;
float x2;
const float threehalfs = 1.5f;
x2 = x * 0.5f;
float_int.y = x;
float_int.i = 0x5f375a86 - (float_int.i >> 1);
float_int.y = float_int.y * (threehalfs - (x2 * float_int.y * float_int.y));
// float_int.y = float_int.y * (threehalfs - (x2 * float_int.y * float_int.y));
// float_int.y = float_int.y * (threehalfs - (x2 * float_int.y * float_int.y));
return (x * float_int.y);
}
static float absolute(float x){
if (x < 0) {
x = -x;
}
return x;
}
/**
* Compute the cross correlation according to Eq. (4) of Goodman
* paper, except that the true correlation is used. His formula
* seems to be incorrect.
*
* @param x pointer to x input vector
* @param y pointer to y input vector
*
* @return value containing the cross-correlation of x and y
*/
static float CrossCorrelation(int16_t *x, int16_t *y){
int m;
float num = 0;
float den = 0;
float x2 = 0;
float y2 = 0;
for (m = 0; m < SBC_M; m++) {
num += ((float)x[m]) * y[m];
x2 += ((float)x[m]) * x[m];
y2 += ((float)y[m]) * y[m];
}
den = (float)SqrtByCarmack(x2 * y2);
return num / den;
}
/**
* Perform pattern matching to find the match of template with the
* history buffer according to Section B of Goodman paper.
*
* @param y pointer to history buffer
*
* @return the lag corresponding to the best match. The lag is
* with respect to the beginning of the history buffer.
*
*/
static int PatternMatch(int16_t *y){
int n;
float maxCn = -999999.0; // large negative number
float Cn;
int bestmatch = 0;
for (n = 0; n < SBC_N; n++){
Cn = CrossCorrelation(&y[SBC_LHIST-SBC_M], &y[n]);
if (Cn > maxCn){
bestmatch = n;
maxCn = Cn;
}
}
return bestmatch;
}
/**
* Perform amplitude matching using mean-absolute-value according
* to Goodman paper.
*
* @param y pointer to history buffer
* @param bestmatch value of the lag to the best match
*
* @return scale factor
*/
static float AmplitudeMatch(int16_t *y, int16_t bestmatch) {
int i;
float sumx = 0;
float sumy = 0.000001f;
float sf;
for (i = 0; i < SBC_FS; i++){
sumx += absolute(y[SBC_LHIST - SBC_FS + i]);
sumy += absolute(y[bestmatch + i]);
}
sf = sumx / sumy;
// This is not in the paper, but limit the scaling factor to something reasonable to avoid creating artifacts
if (sf < 0.75f) {
sf = 0.75f;
}
if (sf > 1.2f) {
sf = 1.2f;
}
return sf;
}
static int16_t crop_sample(float val){
float croped_val = val;
if (croped_val > 32767.0) croped_val= 32767.0;
if (croped_val < -32768.0) croped_val=-32768.0;
return (int16_t) croped_val;
}
/**
* Get a zero signal eSCO frame
* @return pointer to data buffer
*/
uint8_t * sbc_plc_zero_signal_frame(void){
return (uint8_t *)&indices0;
}
/**
* Get a zero signal eSCO pcm frame
* @return pointer to data buffer
*/
int16_t * sbc_plc_zero_signal_frame_pcm(void){
return (int16_t *)&indices0_pcm;
}
/**
* Perform PLC initialization of memory vectors.
*
* @param plc_state pointer to PLC state memory
*/
void sbc_plc_init(sbc_plc_state_t *plc_state){
plc_state->nbf=0;
plc_state->bestlag=0;
memset(plc_state->hist, 0, sizeof(plc_state->hist));
}
/**
* Perform PLC deinitialization of memory vectors.
*
* @param plc_state pointer to PLC state memory
*/
void sbc_plc_deinit(sbc_plc_state_t *plc_state){
plc_state->nbf=0;
plc_state->bestlag=0;
memset(plc_state->hist, 0, sizeof(plc_state->hist));
}
/**
* Perform bad frame processing.
*
* @param plc_state pointer to PLC state memory
* @param ZIRbuf pointer to the ZIR response of the SBC decoder
* @param out pointer to the output samples
*/
void sbc_plc_bad_frame(sbc_plc_state_t *plc_state, int16_t *ZIRbuf, int16_t *out){
int i = 0;
float val;
float sf = 1;
plc_state->nbf++;
if (plc_state->nbf == 1){
// Perform pattern matching to find where to replicate
plc_state->bestlag = PatternMatch(plc_state->hist);
// the replication begins after the template match
plc_state->bestlag += SBC_M;
// Compute Scale Factor to Match Amplitude of Substitution Packet to that of Preceding Packet
sf = AmplitudeMatch(plc_state->hist, plc_state->bestlag);
for (i = 0; i < SBC_OLAL; i++){
val = ZIRbuf[i] * rcos[i]
+ sf * plc_state->hist[plc_state->bestlag + i] * rcos[SBC_OLAL - i - 1];
plc_state->hist[SBC_LHIST + i] = crop_sample(val);
}
for (; i < SBC_FS; i++){
val = sf*plc_state->hist[plc_state->bestlag + i];
plc_state->hist[SBC_LHIST + i] = crop_sample(val);
}
for (; i < SBC_FS + SBC_OLAL; i++){
val = sf * plc_state->hist[plc_state->bestlag + i] * rcos[i-SBC_FS]
+ plc_state->hist[plc_state->bestlag + i] * rcos[SBC_OLAL - 1 - i + SBC_FS];
plc_state->hist[SBC_LHIST + i] = crop_sample(val);
}
for (; i < SBC_FS + SBC_RT + SBC_OLAL; i++){
plc_state->hist[SBC_LHIST + i] = plc_state->hist[plc_state->bestlag + i];
}
} else {
for ( ;i < SBC_FS + SBC_RT + SBC_OLAL; i++){
plc_state->hist[SBC_LHIST + i] = plc_state->hist[plc_state->bestlag + i];
}
}
for (i = 0; i < SBC_FS; i++){
out[i] = plc_state->hist[SBC_LHIST + i];
}
// shift the history buffer
for (i = 0; i < SBC_LHIST + SBC_RT + SBC_OLAL; i++){
plc_state->hist[i] = plc_state->hist[i + SBC_FS];
}
}
/**
* Perform good frame processing. Most of the time, this function
* just updates history buffers and passes the input to the output,
* but in the first good frame after frame loss, it must conceal the
* received signal as it reconverges with the true output.
*
* @param plc_state pointer to PLC state memory
* @param in pointer to the input vector
* @param out pointer to the output samples
*/
void sbc_plc_good_frame(sbc_plc_state_t *plc_state, int16_t *in, int16_t *out){
int i = 0;
if (plc_state->nbf > 0){
for (i = 0; i < SBC_RT; i++){
out[i] = plc_state->hist[SBC_LHIST + i];
}
for (i = SBC_RT; i < SBC_RT + SBC_OLAL; i++){
out[i] = (int16_t)(plc_state->hist[SBC_LHIST + i] * rcos[i - SBC_RT] + in[i] * rcos[SBC_OLAL - 1 - i + SBC_RT]);
}
}
for (; i < SBC_FS; i++){
out[i] = in[i];
}
// Copy the output to the history buffer
for (i = 0; i < SBC_FS; i++){
plc_state->hist[SBC_LHIST + i] = out[i];
}
// shift the history buffer
for (i = 0; i < SBC_LHIST; i++){
plc_state->hist[i] = plc_state->hist[i + SBC_FS];
}
plc_state->nbf = 0;
}
#endif ///(PLC_INCLUDED == TRUE)