esp-idf/components/idf_test/integration_test/TC_IT_MESH_MISC.yml

.MESH_CASE: &MESH_CASE
  SDK: ESP32_IDF
  Test App: SSC_MESH
  auto test: 'Yes'
  category: Function
  test point 1: basic function
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T50_MESH1
  execution time: 0.0
  module: Mesh
  sub module: Misc
  version: v1 (2018-08-15)
  CI ready: 'No'
  level: Integration
  allow fail: ''

.set_softap_dut1: &set_softap_dut1
  LIST_MERGE:
    - - 'SSC SSC1 op -S -o 2'
      - ['P SSC1 C +MODE:OK']
    - - 'SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>'
      - ['P SSC1 C +SAP:OK']
    - - 'SSC SSC1 dhcp -E -o 2'
      - ['R SSC1 C +DHCP:AP,OK']
    - - 'SSC SSC1 ip -S -o 2 -i 192.168.123.1'
      - ['R SSC1 C +IP:OK']
    - - 'SSC SSC1 dhcp -S -o 2'
      - ['R SSC1 C +DHCP:AP,OK']

test cases:
- ID: MESH_MISC_0101
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -I -o 1
    - - P SSC1 C +MESH:DEINIT,OK
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 init/config mesh
    2. dut1 deinit mesh    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: 1 dut mesh deinit after mesh configured
  test point 2: mesh deinit/stop test
  CI ready: 'Yes'
- ID: MESH_MISC_0102
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 1 5
    - - ''
  - - SSC SSC1 mesh -I -o 1
    - - P SSC1 C +MESH:DEINIT,OK
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh
    2. dut1 deinit mesh    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: 1 dut mesh deinit after mesh started
  test point 2: mesh deinit/stop test
  CI ready: 'Yes'
- ID: MESH_MISC_0103
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY 1 5
    - - ''
  - - MSSC SSC[1-<node_num>] mesh -T -o 1
    - - P SSC[1-<node_num>] C +MESH:STOP,OK
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh
    2. dut1 stop mesh    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T6_MESH1
  summary: 6 duts mesh stop after mesh started
  test point 2: mesh deinit/stop test
  CI ready: 'Yes'
- ID: MESH_MISC_0104
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -T -o 2
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - MSSC SSC[1-<node_num>] mesh -Q -o 2
    - - P SSC[1-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "MESHTREE:%%s"%%(<node_num>)
  - - SSC MNODE(0) meshsend -S -d <MNODE(0,-1)_mac> -l 1000 -c 20 -b 20 -f 2
    - - P MNODE(0) C +MESHTXPKT,OK C +MESHSEND,OK
      - P MNODE(0,-1) C +MESHRXPKT,OK
  - - SSC MNODE(0,-1) meshsend -S -d <server_mac> -l 1000 -c 20 -b 20 -f 8
    - - P MNODE(0,-1) C +MESHTXPKT,OK C +MESHSEND,OK
      - P MNODE(0) C TODS_PKT,OK
  - - SSC MNODE(0) mesh -R -o 1
    - - P MNODE(0) C +MESHRX:STOP,OK
  - - SSC MNODE(0,-1) meshsend -S -d <server_mac> -l 1000 -c 100 -b 20 -f 8
    - - ''
  - - DELAY 10
    - - P PC_COM C DELAYDONE
      - P MNODE(0,-1) C +MESHTXPKT,OK NC +MESHTXPKT,FAIL NC +MESHSEND,OK
  - - SSC MNODE(0) mesh -R -o 0
    - - P MNODE(0) C +MESHRX:START,OK C TODS_PKT,OK
      - P MNODE(0,-1) C +MESHSEND,OK
  expected result: |-
    1. restart mesh and establish network
    2. root send packet to leaf
    3. leaf send packet tods
    4. stop recv task on root
    5. leaf send packet tods, blocked
    5. start recv task on root, leaf send out all packet    
  steps: |-
    1. dut1 start mesh
    2. dut1 stop mesh    
  initial condition: MESH_INIT1
  test environment: SSC_T6_MESH1
  summary: mesh restart and send packet test
  test point 2: mesh deinit/stop test
  CI ready: 'No'



- ID: MESH_MISC_0201
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. start dut1 and connect to router
    2. check MESH_EVENT_ROOT_GOT_IP    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: MESH_EVENT_CHILD_CONNECTED and MESH_EVENT_ROOT_GOT_IP test
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0202
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED C MESH_EVENT_ROUTING_TABLE_ADD
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. start dut1 to be root first
    2. start another and check event on dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_CHILD_CONNECTED and MESH_EVENT_ROUTING_TABLE_ADD test
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0203
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] mesh -I
    - - P SSC[1-3] C +MESH:INIT,OK
  - - SSC SSC[1-3] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-3] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 10
    - - P SSC[1-2] C MESH_EVENT_CONNECTED
  - - SSC SSC3 mesh -T
    - - P SSC3 C +MESH:START,OK C MESH_EVENT_CONNECTED,3
      - P SSC[1-2] C MESH_EVENT_ROUTING_TABLE_ADD
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set max_connect=1 and two duts start mesh and establish network
    2. start another and check event on dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T3_MESH1
  summary: MESH_EVENT_ROUTING_TABLE_ADD test (layer3 join)
  test point 2: mesh event test
  CI ready: 'Yes'
#TODO: wrong password should not find MESH_EVENT_ROUTING_TABLE_ADD
- ID: MESH_MISC_0205
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) reboot
    - - P MNODE(0,0) C !!!ready!!!
      - P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
      - P MNODE(0) C MESH_EVENT_ROUTING_TABLE_REMOVE
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot root
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_CHILD_DISCONNECTED and MESH_EVENT_ROUTING_TABLE_REMOVE test
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0206
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0,0)
    - - P MNODE(0,0) C !!!ready!!!
  - - DELAY 10
    - - P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
      - P MNODE(0) C MESH_EVENT_ROUTING_TABLE_REMOVE
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot root
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_CHILD_DISCONNECTED and MESH_EVENT_ROUTING_TABLE_REMOVE test (power reset)
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0207
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) mesh -I -o 1
    - - P MNODE(0,0) C MESH:DEINIT,OK
      - P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
      - P MNODE(0) C MESH_EVENT_ROUTING_TABLE_REMOVE
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot root
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_CHILD_DISCONNECTED and MESH_EVENT_ROUTING_TABLE_REMOVE test (mesh deinit)
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0208
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0,0) reboot
    - - P MNODE(0,0,0) C !!!ready!!!
      - P MNODE(0,0) C MESH_EVENT_ROUTING_TABLE_REMOVE
      - P MNODE(0) C MESH_EVENT_ROUTING_TABLE_REMOVE
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot root
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T12_MESH1
  summary: MESH_EVENT_ROUTING_TABLE_REMOVE test (layer3 leave)
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0209
  <<: *MESH_CASE
  cmd set:
  - ''
  - - LOOP 2 1 "[1,0]" "[1,0]"
    - - ''
  - - SSC MNODE(0) mesh -O -t {%d}
    - - P MNODE(0) C +MESH_POST_STATE,OK
      - P SSC[1-<node_num>] C MESH_EVENT_TODS_STATE,{%d}
  - - SSC MNODE(0) mesh -O -t 0
    - - P MNODE(0) C +MESH_POST_STATE,OK
  - - DELAY 5
    - - P PC_COM C DELAYDONE
      - P SSC[1-<node_num>] NC MESH_EVENT_TODS_STATE
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh network
    2. root post toDS state
    3. check MESH_EVENT_TODS_STATE on all dut    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_TODS_STATE test when root post state
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0210
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 mesh -O -t 1
    - - P SSC1 C +MESH_POST_STATE,OK
      - P SSC1 C MESH_EVENT_TODS_STATE,1
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK MESH_EVENT_CONNECTED,2
      - P SSC2 C MESH_EVENT_TODS_STATE,1
  - - SSC SSC1 reboot
    - - P SSC2 C MESH_EVENT_DISCONNECTED
      - P SSC2 C MESH_EVENT_NETWORK_STATE,1
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh network
    2. root post toDS state
    3. check MESH_EVENT_TODS_STATE on all dut    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_TODS_STATE test when layer2 connected and root disappear
  test point 2: mesh event test
  CI ready: 'Yes'
  # TODO: not work on v3.1
- ID: MESH_MISC_0211
  <<: *MESH_CASE
  cmd set:
  - ''
  - - LOOP 2 1 "[1,0]" "[1,0]"
    - - ''
  - - SSC MNODE(0) mesh -O -t {%d}
    - - P MNODE(0) C +MESH_POST_STATE,OK
      - P SSC[1-<node_num>] C MESH_EVENT_TODS_STATE,{%d}
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh network
    2. root post toDS state
    3. check MESH_EVENT_TODS_STATE on all duts    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, MESH_EVENT_TODS_STATE test
  test point 2: mesh event test
  CI ready: 'No'
- ID: MESH_MISC_0212
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C MESH_EVENT_STARTED
  - - DELAY 5
    - - ''
  - - SSC SSC1 mesh -T -o 1
    - - P SSC1 C MESH_EVENT_STOPPED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh
    2. check MESH_EVENT_STARTED on dut1
    2. dut1 stop mesh
    2. check MESH_EVENT_STOPPED on dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: MESH_EVENT_STARTED and MESH_EVENT_STOPPED test
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0213
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <wrong_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh
    2. check MESH_EVENT_STARTED on dut1
    2. dut1 stop mesh
    2. check MESH_EVENT_STOPPED on dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: MESH_EVENT_NO_PARENT_FOUND test
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0214
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -O -o 0 -n 0 -t 0
    - - P SSC1 C +MESHSET:SELF_ORG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - SSC SSC1 sta -S -n <router_channel>
    - - P SSC1 C MESH_EVENT_SCAN_DONE
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh self_organized=false
    2. wifi scan
    2. check MESH_EVENT_SCAN_DONE on dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: MESH_EVENT_SCAN_DONE test
  test point 2: mesh event test
  CI ready: 'No'
  #TODO: need discussion
- ID: MESH_MISC_0215
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -W -o 1
    - - P MNODE(0) C +MESH:VOTE,OK
      - P SSC[1-<node_num>] C MESH_EVENT_VOTE_STARTED
  - - DELAY 10
    - - P SSC[1-<node_num>] C MESH_EVENT_VOTE_STOPPED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root vote
    2. check all duts start vote    
  initial condition: MESH_INIT1
  test environment: SSC_T6_MESH1
  summary: MESH_EVENT_VOTE_STARTED and MESH_EVENT_VOTE_STOPPED test
  test point 2: mesh event test
  CI ready: 'No'
- ID: MESH_MISC_0216
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -W -o 1
    - - P MNODE(0) C +MESH:VOTE,OK
      - P SSC[1-<node_num>] C MESH_EVENT_VOTE_STARTED
  - - SSC MNODE(0) reboot
    - - P MNODE(0) !!!ready!!!
  - - DELAY 30
    - - ''
  - - SSC SSC[1-<node_num>] mesh -W -o 2
    - - P SSC[1-<node_num>] C VOTE_START_STOP_EQUAL
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh self_organized=false
    2. wifi scan
    2. check MESH_EVENT_SCAN_DONE on dut1    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, MESH_EVENT VOTE_STARTED and VOTE_STOPPED equal test
  test point 2: mesh event test
  CI ready: 'No'
  #TODO: need discussion
- ID: MESH_MISC_0217
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -W -o 1
    - - P MNODE(0) C +MESH:VOTE,OK
      - P SSC[1-<node_num>] C MESH_EVENT_VOTE_STARTED
  - - DELAY 10
    - - P SSC[1-<node_num>] C MESH_EVENT_VOTE_STOPPED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root vote
    2. check all duts start vote    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, MESH_EVENT_VOTE_STARTED and MESH_EVENT_VOTE_STOPPED test
  test point 2: mesh event test
- ID: MESH_MISC_0218
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) meshset -X -o 0 -i 1
    - - P MNODE(0) C +MESHSET:FIX_ROOT,OK
      - P SSC[1-<node_num>] C MESH_EVENT_ROOT_FIXED,1
  - - SSC MNODE(0) meshset -X -o 0 -i 0
    - - P MNODE(0) C +MESHSET:FIX_ROOT,OK
      - P SSC[1-<node_num>] C MESH_EVENT_ROOT_FIXED,0
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set root fix on root
    2. check all duts MESH_EVENT_ROOT_FIXED    
  initial condition: MESH_INIT1
  test environment: SSC_T6_MESH1
  summary: stable network, MESH_EVENT_ROOT_FIXED test
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0219
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 meshset -X -o 0 -i 1
    - - P SSC1 C +MESHSET:FIX_ROOT,OK C MESH_EVENT_ROOT_FIXED,1
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2 C MESH_EVENT_ROOT_FIXED,1
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. set dut1 fix root first
    2. dut2 connected with dut1
    3. check MESH_EVENT_ROOT_FIXED on dut2    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: MESH_EVENT_ROOT_FIXED when connected with parent
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0220
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) meshset -X -o 0 -i 1
    - - P MNODE(0) C +MESHSET:FIX_ROOT,OK
      - P SSC[1-<node_num>] C MESH_EVENT_ROOT_FIXED,1
  - - SSC MNODE(0) meshset -X -o 0 -i 0
    - - P MNODE(0) C +MESHSET:FIX_ROOT,OK
      - P SSC[1-<node_num>] C MESH_EVENT_ROOT_FIXED,0
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set root fix on root
    2. check all duts MESH_EVENT_ROOT_FIXED    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, MESH_EVENT_ROOT_FIXED test
  test point 2: mesh event test
  CI ready: 'No'
- ID: MESH_MISC_0221
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 ap -Q
    - - R SSC1 A <meshap_ssid>:\+APCONFIG:(\w+),
  - - SSC SSC2 meshset -U -o 0 -m <mesh_id2> -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
    - - P SSC2 C +MESHSET:PARENT,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_DISCONNECTED,103
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. start dut1 and check it connected with router
    3. dut2 parent set to dut1 with wrong mesh_id
    4. start dut2 and check disconnected rason DIFF_ID    
  test environment: SSC_T2_MESH1
  summary: test MESH_EVENT_DISCONNECTED, reason DIFF_ID(103)
  test point 2: mesh event test
  CI ready: 'Yes'
- ID: MESH_MISC_0301
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SOC SOC1 LISTEN <test_tcp_port1>
    - - R SOC_COM L OK
  - - SSC MNODE(0) soc -B -t TCP -p <test_tcp_port1>
    - - P MNODE(0) A <sock_id>:\+BIND:(\d+),OK
  - - SSC MNODE(0) soc -C -s <sock_id> -i <pc_ip> -p <test_tcp_port1>
    - - P MNODE(0) RE \+CONNECT:\d+,OK
  - - SOC SOC1 ACCEPT SOC2
    - - R SOC_COM L OK
  - - SSC MNODE(0) soc -S -s <sock_id> -l 1460 -n 10 -j 20
    - - P MNODE(0) RE \+SEND:\d+,OK
  - - SOC SOC2 SEND 1460
    - - R MNODE(0) SL <sock_id>+1460
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root connect to pc
    2. root send pecket to pc    
  initial condition: MESH_INIT1
  test environment: SSC_T1_MESH2
  summary: use socket TCP between root and pc
  test point 2: socket after mesh start
- ID: MESH_MISC_0302
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SOC SOC1 BIND <test_udp_port1> <pc_ip>
    - - R SOC_COM L OK
  - - SSC MNODE(0) ip -Q
    - - P MNODE(0) A <sta_ip>:\+STAIP:(\d+.\d+.\d+.\d+)
  - - SSC MNODE(0) soc -B -t UDP -i <sta_ip> -p <test_udp_port1>
    - - P MNODE(0) A <sock1>:\+BIND:(\d+),OK
  - - SSC MNODE(0) soc -S -s <sock1> -l 1460 -n 10 -i <pc_ip> -p <test_udp_port1> -j 20
    - - P MNODE(0) RE \+SEND:\d+,OK
      - P SOC1 UL 14600
  - - DELAY 5
    - ''
  - - SOC SOC1 SENDTO 1460 <test_udp_port1> <sta_ip>
    - - R MNODE(0) RE "RECVFROM:%%s,1460,%%s,%%u"%%(<sock1>,<pc_ip>,<test_udp_port1>)
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root connect to pc
    2. root send pecket to pc    
  initial condition: MESH_INIT1
  test environment: SSC_T1_MESH2
  summary: use socket UDP between root and pc
  test point 2: socket after mesh start
  CI ready: 'No'
- ID: MESH_MISC_0303
  <<: *MESH_CASE
  cmd set:
  - ''
  - *set_softap_dut1
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 ip -Q
    - - P SSC1 A <ssc1_ip>:\+APIP:(\d+.\d+.\d+.\d+)
  - - SSC SSC[1-2] soc -T
    - - P SSC[1-2] C +CLOSEALL
  - - SSC SSC1 soc -B -t TCP -p <test_tcp_port1>
    - - P SSC1 A <sock_id>:\+BIND:(\d+),OK
  - - SSC SSC1 soc -L -s <sock_id>
    - - P SSC1 RE \+LISTEN:\d+,OK
  - - SSC SSC2 soc -B -t TCP
    - - P SSC2 A <client_sock>:\+BIND:(\d+),OK
  - - SSC SSC2 soc -C -s <client_sock> -i <ssc1_ip> -p <test_tcp_port1>
    - - P SSC2 RE \+CONNECT:\d+,OK
      - P SSC1 A <server_sock>:\+ACCEPT:(\d+)
  - - SSC SSC1 soc -S -s <server_sock> -l 1460 -n 10
    - - P SSC1 RE \+SEND:\d+,OK
  - - SSC SSC2 soc -S -s <client_sock> -l 1460 -n 10
    - - P SSC2 RE \+SEND:\d+,OK
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set dut1 softAP
    2. dut2 start mesh and connect to dut1
    3. use TCP between dut1 and dut2    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: use socket TCP between root and esp32 softAP
  test point 2: socket after mesh start
  CI ready: 'Yes'
- ID: MESH_MISC_0304
  <<: *MESH_CASE
  cmd set:
  - ''
  - *set_softap_dut1
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 ip -Q
    - - P SSC1 A <ssc1_ip>:\+APIP:(\d+.\d+.\d+.\d+)
  - - SSC SSC2 ip -Q
    - - P SSC2 A <ssc2_ip>:\+STAIP:(\d+.\d+.\d+.\d+)
  - - SSC SSC[1-2] soc -T
    - - P SSC[1-2] C +CLOSEALL
  - - SSC SSC1 soc -B -t UDP -i <ssc1_ip> -p <test_udp_port1>
    - - P SSC1 A <sock1>:\+BIND:(\d+),OK
  - - SSC SSC2 soc -B -t UDP -i <ssc2_ip> -p <test_udp_port1>
    - - P SSC2 A <sock2>:\+BIND:(\d+),OK
  - - SSC SSC1 soc -S -s <sock1> -l 1460 -n 10 -i <ssc2_ip> -p <test_udp_port1>
    - - P SSC1 RE \+SEND:\d+,OK
  - - SSC SSC2 soc -S -s <sock2> -l 1460 -n 10 -i <ssc1_ip> -p <test_udp_port1>
    - - P SSC2 RE \+SEND:\d+,OK
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. set dut1 softAP
    2. dut2 start mesh and connect to dut1
    3. use UDP between dut1 and dut2    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: use socket UDP between root and esp32 softAP
  test point 2: socket after mesh start
  CI ready: 'Yes'

- ID: MESH_MISC_5001
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - ''
  - - SSC SSC1 ram
    - - R SSC1 C +FREEHEAP
  - - LOOP 300 8
    - - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - SSC SSC1 ram
    - - R SSC1 C +FREEHEAP
  - - DELAY 1 15
    - - ''
  - - SSC SSC1 mesh -T -o 1
    - - P SSC1 C +MESH:STOP,OK
  - - DELAY 2
    - - ''
  - - SSC SSC1 ram
    - - R SSC1 C +FREEHEAP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed
    5. succeed
    6. succeed
    7. succeed    
  steps: |-
    1. mesh init
    2. mesh config
    3. mesh start
    4. check heap size
    5. mesh stop
    6. check heap size
    7. loop    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: cycle calling mesh_stop/mesh_start, check heap size
  test point 2: mesh deinit/stop test
- ID: MESH_MISC_5002
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - ''
  - - SSC SSC[1-6] ram
    - - R SSC[1-6] C +FREEHEAP
  - - LOOP 200 8
    - - ''
  - - SSC SSC[1-6] mesh -I
    - - P SSC[1-6] C +MESH:INIT,OK
  - - SSC SSC[1-6] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-6] C +MESHSET:CFG,OK
  - - SSC SSC[1-6] mesh -T
    - - P SSC[1-6] C +MESH:START,OK
  - - SSC SSC[1-6] ram
    - - R SSC[1-6] C +FREEHEAP
  - - DELAY 5 30
    - - ''
  - - SSC SSC[1-6] mesh -T -o 1
    - - P SSC[1-6] C +MESH:STOP,OK
  - - DELAY 2
    - - ''
  - - SSC SSC[1-6] ram
    - - R SSC[1-6] C +FREEHEAP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. all duts start mesh
    2. check heap size
    3. mesh stop and check heap size
    4. loop    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T6_MESH1
  summary: 6 duts cycle eatablish network and stop mesh, check heap size
  test point 2: mesh deinit/stop test