mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
51d6296fde
- added new test for usb_host_lib example for all targets
- CI USB host test are run on esp32p4
- CI USB device tests temporarily disabled until usb_device runner is fixed
- hcd and usb_host tests which do not require PHY are run on esp32p4
40 lines
1.5 KiB
Python
40 lines
1.5 KiB
Python
# SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
|
# SPDX-License-Identifier: CC0-1.0
|
|
import pytest
|
|
from pytest_embedded import Dut
|
|
|
|
|
|
@pytest.mark.esp32s2
|
|
@pytest.mark.esp32s3
|
|
@pytest.mark.esp32p4
|
|
@pytest.mark.temp_skip_ci(targets=['esp32s2'], reason='lack of runners with usb_host_flash_disk tag')
|
|
@pytest.mark.usb_host_flash_disk
|
|
def test_usb_host_msc_example(dut: Dut) -> None:
|
|
# Get wMaxPacketSize to get USB device speed
|
|
max_packet_size = int(dut.expect(r'wMaxPacketSize (\d{2,3})')[1].decode())
|
|
|
|
# Check result of file_operations()
|
|
dut.expect_exact("example: Read from file '/usb/esp/test.txt': 'Hello World!'")
|
|
|
|
# Check result of speed_test()
|
|
write_throughput = float(dut.expect(r'example: Write speed ([0-9]*[.]?[0-9]+) MiB')[1].decode())
|
|
read_throughput = float(dut.expect(r'example: Read speed ([0-9]*[.]?[0-9]+) MiB')[1].decode())
|
|
|
|
# Set write and read throughput limits
|
|
if (max_packet_size == 512): # wMaxPacketSize = 512 for HS
|
|
write_throughput_limit = 4.9
|
|
read_throughput_limit = 11.5
|
|
else: # wMaxPacketSize = 64 for FS
|
|
write_throughput_limit = 0.9
|
|
read_throughput_limit = 1.0
|
|
|
|
# These values should be updated for HS targets
|
|
if write_throughput > write_throughput_limit:
|
|
print('Write throughput put OK')
|
|
else:
|
|
print('write throughput too slow!')
|
|
if read_throughput > read_throughput_limit:
|
|
print('Read throughput put OK')
|
|
else:
|
|
print('Read throughput too slow!')
|