esp-idf/examples/system/deep_sleep/main/ext_wakeup.c
2024-04-15 20:33:02 +08:00

116 lines
4.8 KiB
C

/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Unlicense OR CC0-1.0
*/
#include <stdio.h>
#include "esp_sleep.h"
#include "sdkconfig.h"
#include "driver/rtc_io.h"
#if CONFIG_EXAMPLE_EXT0_WAKEUP
#if CONFIG_IDF_TARGET_ESP32
const int ext_wakeup_pin_0 = 25;
#else
const int ext_wakeup_pin_0 = 3;
#endif
void example_deep_sleep_register_ext0_wakeup(void)
{
printf("Enabling EXT0 wakeup on pin GPIO%d\n", ext_wakeup_pin_0);
ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(ext_wakeup_pin_0, 1));
// Configure pullup/downs via RTCIO to tie wakeup pins to inactive level during deepsleep.
// EXT0 resides in the same power domain (RTC_PERIPH) as the RTC IO pullup/downs.
// No need to keep that power domain explicitly, unlike EXT1.
ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_0));
ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_0));
}
#endif // CONFIG_EXAMPLE_EXT0_WAKEUP
#if CONFIG_EXAMPLE_EXT1_WAKEUP
void example_deep_sleep_register_ext1_wakeup(void)
{
const int ext_wakeup_pin_1 = CONFIG_EXAMPLE_EXT1_WAKEUP_PIN_1;
const int ext_wakeup_pin_2 = CONFIG_EXAMPLE_EXT1_WAKEUP_PIN_2;
const uint64_t ext_wakeup_pin_1_mask = 1ULL << ext_wakeup_pin_1;
const uint64_t ext_wakeup_pin_2_mask = 1ULL << ext_wakeup_pin_2;
printf("Enabling EXT1 wakeup on pins GPIO%d, GPIO%d\n", ext_wakeup_pin_1, ext_wakeup_pin_2);
#if SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(ext_wakeup_pin_1_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_1));
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(ext_wakeup_pin_2_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_2));
#else
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup_io(ext_wakeup_pin_1_mask | ext_wakeup_pin_2_mask, CONFIG_EXAMPLE_EXT1_WAKEUP_MODE));
#endif
/* If there are no external pull-up/downs, tie wakeup pins to inactive level with internal pull-up/downs via RTC IO
* during deepsleep. However, RTC IO relies on the RTC_PERIPH power domain. Keeping this power domain on will
* increase some power comsumption. However, if we turn off the RTC_PERIPH domain or if certain chips lack the RTC_PERIPH
* domain, we will use the HOLD feature to maintain the pull-up and pull-down on the pins during sleep.*/
#if CONFIG_EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
#if SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
#if SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
if (CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_1) {
ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_1));
ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_1));
} else {
ESP_ERROR_CHECK(rtc_gpio_pulldown_dis(ext_wakeup_pin_1));
ESP_ERROR_CHECK(rtc_gpio_pullup_en(ext_wakeup_pin_1));
}
if (CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_2) {
ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_2));
ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_2));
} else {
ESP_ERROR_CHECK(rtc_gpio_pulldown_dis(ext_wakeup_pin_2));
ESP_ERROR_CHECK(rtc_gpio_pullup_en(ext_wakeup_pin_2));
}
#else // !SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
if (CONFIG_EXAMPLE_EXT1_WAKEUP_MODE) {
ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_1));
ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_1));
ESP_ERROR_CHECK(rtc_gpio_pullup_dis(ext_wakeup_pin_2));
ESP_ERROR_CHECK(rtc_gpio_pulldown_en(ext_wakeup_pin_2));
} else {
ESP_ERROR_CHECK(rtc_gpio_pulldown_dis(ext_wakeup_pin_1));
ESP_ERROR_CHECK(rtc_gpio_pullup_en(ext_wakeup_pin_1));
ESP_ERROR_CHECK(rtc_gpio_pulldown_dis(ext_wakeup_pin_2));
ESP_ERROR_CHECK(rtc_gpio_pullup_en(ext_wakeup_pin_2));
}
#endif
#else // ! SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
#if SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
if (CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_1) {
gpio_pullup_dis(ext_wakeup_pin_1);
gpio_pulldown_en(ext_wakeup_pin_1);
} else {
gpio_pulldown_dis(ext_wakeup_pin_1);
gpio_pullup_en(ext_wakeup_pin_1);
}
if (CONFIG_EXAMPLE_EXT1_WAKEUP_MODE_PIN_2) {
gpio_pullup_dis(ext_wakeup_pin_2);
gpio_pulldown_en(ext_wakeup_pin_2);
} else {
gpio_pulldown_dis(ext_wakeup_pin_2);
gpio_pullup_en(ext_wakeup_pin_2);
}
#else
if (CONFIG_EXAMPLE_EXT1_WAKEUP_MODE) {
ESP_ERROR_CHECK(gpio_pullup_dis(ext_wakeup_pin_1));
ESP_ERROR_CHECK(gpio_pulldown_en(ext_wakeup_pin_1));
ESP_ERROR_CHECK(gpio_pullup_dis(ext_wakeup_pin_2));
ESP_ERROR_CHECK(gpio_pulldown_en(ext_wakeup_pin_2));
} else {
ESP_ERROR_CHECK(gpio_pulldown_dis(ext_wakeup_pin_1));
ESP_ERROR_CHECK(gpio_pullup_en(ext_wakeup_pin_1));
ESP_ERROR_CHECK(gpio_pulldown_dis(ext_wakeup_pin_2));
ESP_ERROR_CHECK(gpio_pullup_en(ext_wakeup_pin_2));
}
#endif
#endif
#endif // CONFIG_EXAMPLE_EXT1_USE_INTERNAL_PULLUPS
}
#endif // CONFIG_EXAMPLE_EXT1_WAKEUP