mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
967 lines
37 KiB
Python
Executable File
967 lines
37 KiB
Python
Executable File
#!/usr/bin/env python
|
|
#
|
|
# esp-idf serial output monitor tool. Does some helpful things:
|
|
# - Looks up hex addresses in ELF file with addr2line
|
|
# - Reset ESP32 via serial RTS line (Ctrl-T Ctrl-R)
|
|
# - Run flash build target to rebuild and flash entire project (Ctrl-T Ctrl-F)
|
|
# - Run app-flash build target to rebuild and flash app only (Ctrl-T Ctrl-A)
|
|
# - If gdbstub output is detected, gdb is automatically loaded
|
|
#
|
|
# Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
# Contains elements taken from miniterm "Very simple serial terminal" which
|
|
# is part of pySerial. https://github.com/pyserial/pyserial
|
|
# (C)2002-2015 Chris Liechti <cliechti@gmx.net>
|
|
#
|
|
# Originally released under BSD-3-Clause license.
|
|
#
|
|
from __future__ import print_function, division
|
|
from __future__ import unicode_literals
|
|
from builtins import chr
|
|
from builtins import object
|
|
from builtins import bytes
|
|
import subprocess
|
|
import argparse
|
|
import codecs
|
|
import datetime
|
|
import re
|
|
import os
|
|
try:
|
|
import queue
|
|
except ImportError:
|
|
import Queue as queue
|
|
import shlex
|
|
import time
|
|
import sys
|
|
import serial
|
|
import serial.tools.list_ports
|
|
import serial.tools.miniterm as miniterm
|
|
import threading
|
|
import ctypes
|
|
import types
|
|
from distutils.version import StrictVersion
|
|
from io import open
|
|
import textwrap
|
|
|
|
key_description = miniterm.key_description
|
|
|
|
# Control-key characters
|
|
CTRL_A = '\x01'
|
|
CTRL_B = '\x02'
|
|
CTRL_F = '\x06'
|
|
CTRL_H = '\x08'
|
|
CTRL_R = '\x12'
|
|
CTRL_T = '\x14'
|
|
CTRL_Y = '\x19'
|
|
CTRL_P = '\x10'
|
|
CTRL_X = '\x18'
|
|
CTRL_L = '\x0c'
|
|
CTRL_RBRACKET = '\x1d' # Ctrl+]
|
|
|
|
# Command parsed from console inputs
|
|
CMD_STOP = 1
|
|
CMD_RESET = 2
|
|
CMD_MAKE = 3
|
|
CMD_APP_FLASH = 4
|
|
CMD_OUTPUT_TOGGLE = 5
|
|
CMD_TOGGLE_LOGGING = 6
|
|
CMD_ENTER_BOOT = 7
|
|
|
|
# ANSI terminal codes (if changed, regular expressions in LineMatcher need to be udpated)
|
|
ANSI_RED = '\033[1;31m'
|
|
ANSI_YELLOW = '\033[0;33m'
|
|
ANSI_NORMAL = '\033[0m'
|
|
|
|
|
|
def color_print(message, color):
|
|
""" Print a message to stderr with colored highlighting """
|
|
sys.stderr.write("%s%s%s\n" % (color, message, ANSI_NORMAL))
|
|
|
|
|
|
def yellow_print(message):
|
|
color_print(message, ANSI_YELLOW)
|
|
|
|
|
|
def red_print(message):
|
|
color_print(message, ANSI_RED)
|
|
|
|
|
|
__version__ = "1.1"
|
|
|
|
# Tags for tuples in queues
|
|
TAG_KEY = 0
|
|
TAG_SERIAL = 1
|
|
TAG_SERIAL_FLUSH = 2
|
|
TAG_CMD = 3
|
|
|
|
# regex matches an potential PC value (0x4xxxxxxx)
|
|
MATCH_PCADDR = re.compile(r'0x4[0-9a-f]{7}', re.IGNORECASE)
|
|
|
|
DEFAULT_TOOLCHAIN_PREFIX = "xtensa-esp32-elf-"
|
|
|
|
DEFAULT_PRINT_FILTER = ""
|
|
|
|
|
|
class StoppableThread(object):
|
|
"""
|
|
Provide a Thread-like class which can be 'cancelled' via a subclass-provided
|
|
cancellation method.
|
|
|
|
Can be started and stopped multiple times.
|
|
|
|
Isn't an instance of type Thread because Python Thread objects can only be run once
|
|
"""
|
|
def __init__(self):
|
|
self._thread = None
|
|
|
|
@property
|
|
def alive(self):
|
|
"""
|
|
Is 'alive' whenever the internal thread object exists
|
|
"""
|
|
return self._thread is not None
|
|
|
|
def start(self):
|
|
if self._thread is None:
|
|
self._thread = threading.Thread(target=self._run_outer)
|
|
self._thread.start()
|
|
|
|
def _cancel(self):
|
|
pass # override to provide cancellation functionality
|
|
|
|
def run(self):
|
|
pass # override for the main thread behaviour
|
|
|
|
def _run_outer(self):
|
|
try:
|
|
self.run()
|
|
finally:
|
|
self._thread = None
|
|
|
|
def stop(self):
|
|
if self._thread is not None:
|
|
old_thread = self._thread
|
|
self._thread = None
|
|
self._cancel()
|
|
old_thread.join()
|
|
|
|
|
|
class ConsoleReader(StoppableThread):
|
|
""" Read input keys from the console and push them to the queue,
|
|
until stopped.
|
|
"""
|
|
def __init__(self, console, event_queue, cmd_queue, parser, test_mode):
|
|
super(ConsoleReader, self).__init__()
|
|
self.console = console
|
|
self.event_queue = event_queue
|
|
self.cmd_queue = cmd_queue
|
|
self.parser = parser
|
|
self.test_mode = test_mode
|
|
|
|
def run(self):
|
|
self.console.setup()
|
|
try:
|
|
while self.alive:
|
|
try:
|
|
if os.name == 'nt':
|
|
# Windows kludge: because the console.cancel() method doesn't
|
|
# seem to work to unblock getkey() on the Windows implementation.
|
|
#
|
|
# So we only call getkey() if we know there's a key waiting for us.
|
|
import msvcrt
|
|
while not msvcrt.kbhit() and self.alive:
|
|
time.sleep(0.1)
|
|
if not self.alive:
|
|
break
|
|
elif self.test_mode:
|
|
# In testing mode the stdin is connected to PTY but is not used for input anything. For PTY
|
|
# the canceling by fcntl.ioctl isn't working and would hang in self.console.getkey().
|
|
# Therefore, we avoid calling it.
|
|
while self.alive:
|
|
time.sleep(0.1)
|
|
break
|
|
c = self.console.getkey()
|
|
except KeyboardInterrupt:
|
|
c = '\x03'
|
|
if c is not None:
|
|
ret = self.parser.parse(c)
|
|
if ret is not None:
|
|
(tag, cmd) = ret
|
|
# stop command should be executed last
|
|
if tag == TAG_CMD and cmd != CMD_STOP:
|
|
self.cmd_queue.put(ret)
|
|
else:
|
|
self.event_queue.put(ret)
|
|
|
|
finally:
|
|
self.console.cleanup()
|
|
|
|
def _cancel(self):
|
|
if os.name == 'posix' and not self.test_mode:
|
|
# this is the way cancel() is implemented in pyserial 3.3 or newer,
|
|
# older pyserial (3.1+) has cancellation implemented via 'select',
|
|
# which does not work when console sends an escape sequence response
|
|
#
|
|
# even older pyserial (<3.1) does not have this method
|
|
#
|
|
# on Windows there is a different (also hacky) fix, applied above.
|
|
#
|
|
# note that TIOCSTI is not implemented in WSL / bash-on-Windows.
|
|
# TODO: introduce some workaround to make it work there.
|
|
#
|
|
# Note: This would throw exception in testing mode when the stdin is connected to PTY.
|
|
import fcntl
|
|
import termios
|
|
fcntl.ioctl(self.console.fd, termios.TIOCSTI, b'\0')
|
|
|
|
|
|
class ConsoleParser(object):
|
|
|
|
def __init__(self, eol="CRLF"):
|
|
self.translate_eol = {
|
|
"CRLF": lambda c: c.replace("\n", "\r\n"),
|
|
"CR": lambda c: c.replace("\n", "\r"),
|
|
"LF": lambda c: c.replace("\r", "\n"),
|
|
}[eol]
|
|
self.menu_key = CTRL_T
|
|
self.exit_key = CTRL_RBRACKET
|
|
self._pressed_menu_key = False
|
|
|
|
def parse(self, key):
|
|
ret = None
|
|
if self._pressed_menu_key:
|
|
ret = self._handle_menu_key(key)
|
|
elif key == self.menu_key:
|
|
self._pressed_menu_key = True
|
|
elif key == self.exit_key:
|
|
ret = (TAG_CMD, CMD_STOP)
|
|
else:
|
|
key = self.translate_eol(key)
|
|
ret = (TAG_KEY, key)
|
|
return ret
|
|
|
|
def _handle_menu_key(self, c):
|
|
ret = None
|
|
if c == self.exit_key or c == self.menu_key: # send verbatim
|
|
ret = (TAG_KEY, c)
|
|
elif c in [CTRL_H, 'h', 'H', '?']:
|
|
red_print(self.get_help_text())
|
|
elif c == CTRL_R: # Reset device via RTS
|
|
ret = (TAG_CMD, CMD_RESET)
|
|
elif c == CTRL_F: # Recompile & upload
|
|
ret = (TAG_CMD, CMD_MAKE)
|
|
elif c in [CTRL_A, 'a', 'A']: # Recompile & upload app only
|
|
# "CTRL-A" cannot be captured with the default settings of the Windows command line, therefore, "A" can be used
|
|
# instead
|
|
ret = (TAG_CMD, CMD_APP_FLASH)
|
|
elif c == CTRL_Y: # Toggle output display
|
|
ret = (TAG_CMD, CMD_OUTPUT_TOGGLE)
|
|
elif c == CTRL_L: # Toggle saving output into file
|
|
ret = (TAG_CMD, CMD_TOGGLE_LOGGING)
|
|
elif c == CTRL_P:
|
|
yellow_print("Pause app (enter bootloader mode), press Ctrl-T Ctrl-R to restart")
|
|
# to fast trigger pause without press menu key
|
|
ret = (TAG_CMD, CMD_ENTER_BOOT)
|
|
elif c in [CTRL_X, 'x', 'X']: # Exiting from within the menu
|
|
ret = (TAG_CMD, CMD_STOP)
|
|
else:
|
|
red_print('--- unknown menu character {} --'.format(key_description(c)))
|
|
|
|
self._pressed_menu_key = False
|
|
return ret
|
|
|
|
def get_help_text(self):
|
|
text = """\
|
|
--- idf_monitor ({version}) - ESP-IDF monitor tool
|
|
--- based on miniterm from pySerial
|
|
---
|
|
--- {exit:8} Exit program
|
|
--- {menu:8} Menu escape key, followed by:
|
|
--- Menu keys:
|
|
--- {menu:14} Send the menu character itself to remote
|
|
--- {exit:14} Send the exit character itself to remote
|
|
--- {reset:14} Reset target board via RTS line
|
|
--- {makecmd:14} Build & flash project
|
|
--- {appmake:14} Build & flash app only
|
|
--- {output:14} Toggle output display
|
|
--- {log:14} Toggle saving output into file
|
|
--- {pause:14} Reset target into bootloader to pause app via RTS line
|
|
--- {menuexit:14} Exit program
|
|
""".format(version=__version__,
|
|
exit=key_description(self.exit_key),
|
|
menu=key_description(self.menu_key),
|
|
reset=key_description(CTRL_R),
|
|
makecmd=key_description(CTRL_F),
|
|
appmake=key_description(CTRL_A) + ' (or A)',
|
|
output=key_description(CTRL_Y),
|
|
log=key_description(CTRL_L),
|
|
pause=key_description(CTRL_P),
|
|
menuexit=key_description(CTRL_X) + ' (or X)')
|
|
return textwrap.dedent(text)
|
|
|
|
def get_next_action_text(self):
|
|
text = """\
|
|
--- Press {} to exit monitor.
|
|
--- Press {} to build & flash project.
|
|
--- Press {} to build & flash app.
|
|
--- Press any other key to resume monitor (resets target).
|
|
""".format(key_description(self.exit_key),
|
|
key_description(CTRL_F),
|
|
key_description(CTRL_A))
|
|
return textwrap.dedent(text)
|
|
|
|
def parse_next_action_key(self, c):
|
|
ret = None
|
|
if c == self.exit_key:
|
|
ret = (TAG_CMD, CMD_STOP)
|
|
elif c == CTRL_F: # Recompile & upload
|
|
ret = (TAG_CMD, CMD_MAKE)
|
|
elif c in [CTRL_A, 'a', 'A']: # Recompile & upload app only
|
|
# "CTRL-A" cannot be captured with the default settings of the Windows command line, therefore, "A" can be used
|
|
# instead
|
|
ret = (TAG_CMD, CMD_APP_FLASH)
|
|
return ret
|
|
|
|
|
|
class SerialReader(StoppableThread):
|
|
""" Read serial data from the serial port and push to the
|
|
event queue, until stopped.
|
|
"""
|
|
def __init__(self, serial, event_queue):
|
|
super(SerialReader, self).__init__()
|
|
self.baud = serial.baudrate
|
|
self.serial = serial
|
|
self.event_queue = event_queue
|
|
if not hasattr(self.serial, 'cancel_read'):
|
|
# enable timeout for checking alive flag,
|
|
# if cancel_read not available
|
|
self.serial.timeout = 0.25
|
|
|
|
def run(self):
|
|
if not self.serial.is_open:
|
|
self.serial.baudrate = self.baud
|
|
self.serial.rts = True # Force an RTS reset on open
|
|
self.serial.open()
|
|
self.serial.rts = False
|
|
self.serial.dtr = self.serial.dtr # usbser.sys workaround
|
|
try:
|
|
while self.alive:
|
|
data = self.serial.read(self.serial.in_waiting or 1)
|
|
if len(data):
|
|
self.event_queue.put((TAG_SERIAL, data), False)
|
|
finally:
|
|
self.serial.close()
|
|
|
|
def _cancel(self):
|
|
if hasattr(self.serial, 'cancel_read'):
|
|
try:
|
|
self.serial.cancel_read()
|
|
except Exception:
|
|
pass
|
|
|
|
|
|
class LineMatcher(object):
|
|
"""
|
|
Assembles a dictionary of filtering rules based on the --print_filter
|
|
argument of idf_monitor. Then later it is used to match lines and
|
|
determine whether they should be shown on screen or not.
|
|
"""
|
|
LEVEL_N = 0
|
|
LEVEL_E = 1
|
|
LEVEL_W = 2
|
|
LEVEL_I = 3
|
|
LEVEL_D = 4
|
|
LEVEL_V = 5
|
|
|
|
level = {'N': LEVEL_N, 'E': LEVEL_E, 'W': LEVEL_W, 'I': LEVEL_I, 'D': LEVEL_D,
|
|
'V': LEVEL_V, '*': LEVEL_V, '': LEVEL_V}
|
|
|
|
def __init__(self, print_filter):
|
|
self._dict = dict()
|
|
self._re = re.compile(r'^(?:\033\[[01];?[0-9]+m?)?([EWIDV]) \([0-9]+\) ([^:]+): ')
|
|
items = print_filter.split()
|
|
if len(items) == 0:
|
|
self._dict["*"] = self.LEVEL_V # default is to print everything
|
|
for f in items:
|
|
s = f.split(r':')
|
|
if len(s) == 1:
|
|
# specifying no warning level defaults to verbose level
|
|
lev = self.LEVEL_V
|
|
elif len(s) == 2:
|
|
if len(s[0]) == 0:
|
|
raise ValueError('No tag specified in filter ' + f)
|
|
try:
|
|
lev = self.level[s[1].upper()]
|
|
except KeyError:
|
|
raise ValueError('Unknown warning level in filter ' + f)
|
|
else:
|
|
raise ValueError('Missing ":" in filter ' + f)
|
|
self._dict[s[0]] = lev
|
|
|
|
def match(self, line):
|
|
try:
|
|
m = self._re.search(line)
|
|
if m:
|
|
lev = self.level[m.group(1)]
|
|
if m.group(2) in self._dict:
|
|
return self._dict[m.group(2)] >= lev
|
|
return self._dict.get("*", self.LEVEL_N) >= lev
|
|
except (KeyError, IndexError):
|
|
# Regular line written with something else than ESP_LOG*
|
|
# or an empty line.
|
|
pass
|
|
# We need something more than "*.N" for printing.
|
|
return self._dict.get("*", self.LEVEL_N) > self.LEVEL_N
|
|
|
|
|
|
class SerialStopException(Exception):
|
|
"""
|
|
This exception is used for stopping the IDF monitor in testing mode.
|
|
"""
|
|
pass
|
|
|
|
|
|
class Monitor(object):
|
|
"""
|
|
Monitor application main class.
|
|
|
|
This was originally derived from miniterm.Miniterm, but it turned out to be easier to write from scratch for this
|
|
purpose.
|
|
|
|
Main difference is that all event processing happens in the main thread, not the worker threads.
|
|
"""
|
|
def __init__(self, serial_instance, elf_file, print_filter, make="make", encrypted=False,
|
|
toolchain_prefix=DEFAULT_TOOLCHAIN_PREFIX, eol="CRLF"):
|
|
super(Monitor, self).__init__()
|
|
self.event_queue = queue.Queue()
|
|
self.cmd_queue = queue.Queue()
|
|
self.console = miniterm.Console()
|
|
if os.name == 'nt':
|
|
sys.stderr = ANSIColorConverter(sys.stderr, decode_output=True)
|
|
self.console.output = ANSIColorConverter(self.console.output)
|
|
self.console.byte_output = ANSIColorConverter(self.console.byte_output)
|
|
|
|
if StrictVersion(serial.VERSION) < StrictVersion('3.3.0'):
|
|
# Use Console.getkey implementation from 3.3.0 (to be in sync with the ConsoleReader._cancel patch above)
|
|
def getkey_patched(self):
|
|
c = self.enc_stdin.read(1)
|
|
if c == chr(0x7f):
|
|
c = chr(8) # map the BS key (which yields DEL) to backspace
|
|
return c
|
|
|
|
self.console.getkey = types.MethodType(getkey_patched, self.console)
|
|
|
|
socket_mode = serial_instance.port.startswith("socket://") # testing hook - data from serial can make exit the monitor
|
|
self.serial = serial_instance
|
|
self.console_parser = ConsoleParser(eol)
|
|
self.console_reader = ConsoleReader(self.console, self.event_queue, self.cmd_queue, self.console_parser, socket_mode)
|
|
self.serial_reader = SerialReader(self.serial, self.event_queue)
|
|
self.elf_file = elf_file
|
|
if not os.path.exists(make):
|
|
self.make = shlex.split(make) # allow for possibility the "make" arg is a list of arguments (for idf.py)
|
|
else:
|
|
self.make = make
|
|
self.encrypted = encrypted
|
|
self.toolchain_prefix = toolchain_prefix
|
|
|
|
# internal state
|
|
self._last_line_part = b""
|
|
self._gdb_buffer = b""
|
|
self._pc_address_buffer = b""
|
|
self._line_matcher = LineMatcher(print_filter)
|
|
self._invoke_processing_last_line_timer = None
|
|
self._force_line_print = False
|
|
self._output_enabled = True
|
|
self._serial_check_exit = socket_mode
|
|
self._log_file = None
|
|
|
|
def invoke_processing_last_line(self):
|
|
self.event_queue.put((TAG_SERIAL_FLUSH, b''), False)
|
|
|
|
def main_loop(self):
|
|
self.console_reader.start()
|
|
self.serial_reader.start()
|
|
try:
|
|
while self.console_reader.alive and self.serial_reader.alive:
|
|
try:
|
|
item = self.cmd_queue.get_nowait()
|
|
except queue.Empty:
|
|
try:
|
|
item = self.event_queue.get(True, 0.03)
|
|
except queue.Empty:
|
|
continue
|
|
|
|
(event_tag, data) = item
|
|
if event_tag == TAG_CMD:
|
|
self.handle_commands(data)
|
|
elif event_tag == TAG_KEY:
|
|
try:
|
|
self.serial.write(codecs.encode(data))
|
|
except serial.SerialException:
|
|
pass # this shouldn't happen, but sometimes port has closed in serial thread
|
|
except UnicodeEncodeError:
|
|
pass # this can happen if a non-ascii character was passed, ignoring
|
|
elif event_tag == TAG_SERIAL:
|
|
self.handle_serial_input(data)
|
|
if self._invoke_processing_last_line_timer is not None:
|
|
self._invoke_processing_last_line_timer.cancel()
|
|
self._invoke_processing_last_line_timer = threading.Timer(0.1, self.invoke_processing_last_line)
|
|
self._invoke_processing_last_line_timer.start()
|
|
# If no futher data is received in the next short period
|
|
# of time then the _invoke_processing_last_line_timer
|
|
# generates an event which will result in the finishing of
|
|
# the last line. This is fix for handling lines sent
|
|
# without EOL.
|
|
elif event_tag == TAG_SERIAL_FLUSH:
|
|
self.handle_serial_input(data, finalize_line=True)
|
|
else:
|
|
raise RuntimeError("Bad event data %r" % ((event_tag,data),))
|
|
except SerialStopException:
|
|
sys.stderr.write(ANSI_NORMAL + "Stopping condition has been received\n")
|
|
finally:
|
|
try:
|
|
self.console_reader.stop()
|
|
self.serial_reader.stop()
|
|
self.stop_logging()
|
|
# Cancelling _invoke_processing_last_line_timer is not
|
|
# important here because receiving empty data doesn't matter.
|
|
self._invoke_processing_last_line_timer = None
|
|
except Exception:
|
|
pass
|
|
sys.stderr.write(ANSI_NORMAL + "\n")
|
|
|
|
def handle_serial_input(self, data, finalize_line=False):
|
|
sp = data.split(b'\n')
|
|
if self._last_line_part != b"":
|
|
# add unprocessed part from previous "data" to the first line
|
|
sp[0] = self._last_line_part + sp[0]
|
|
self._last_line_part = b""
|
|
if sp[-1] != b"":
|
|
# last part is not a full line
|
|
self._last_line_part = sp.pop()
|
|
for line in sp:
|
|
if line != b"":
|
|
if self._serial_check_exit and line == self.console_parser.exit_key.encode('latin-1'):
|
|
raise SerialStopException()
|
|
if self._force_line_print or self._line_matcher.match(line.decode(errors="ignore")):
|
|
self._print(line + b'\n')
|
|
self.handle_possible_pc_address_in_line(line)
|
|
self.check_gdbstub_trigger(line)
|
|
self._force_line_print = False
|
|
# Now we have the last part (incomplete line) in _last_line_part. By
|
|
# default we don't touch it and just wait for the arrival of the rest
|
|
# of the line. But after some time when we didn't received it we need
|
|
# to make a decision.
|
|
if self._last_line_part != b"":
|
|
if self._force_line_print or (finalize_line and self._line_matcher.match(self._last_line_part.decode(errors="ignore"))):
|
|
self._force_line_print = True
|
|
self._print(self._last_line_part)
|
|
self.handle_possible_pc_address_in_line(self._last_line_part)
|
|
self.check_gdbstub_trigger(self._last_line_part)
|
|
# It is possible that the incomplete line cuts in half the PC
|
|
# address. A small buffer is kept and will be used the next time
|
|
# handle_possible_pc_address_in_line is invoked to avoid this problem.
|
|
# MATCH_PCADDR matches 10 character long addresses. Therefore, we
|
|
# keep the last 9 characters.
|
|
self._pc_address_buffer = self._last_line_part[-9:]
|
|
# GDB sequence can be cut in half also. GDB sequence is 7
|
|
# characters long, therefore, we save the last 6 characters.
|
|
self._gdb_buffer = self._last_line_part[-6:]
|
|
self._last_line_part = b""
|
|
# else: keeping _last_line_part and it will be processed the next time
|
|
# handle_serial_input is invoked
|
|
|
|
def handle_possible_pc_address_in_line(self, line):
|
|
line = self._pc_address_buffer + line
|
|
self._pc_address_buffer = b""
|
|
for m in re.finditer(MATCH_PCADDR, line.decode(errors="ignore")):
|
|
self.lookup_pc_address(m.group())
|
|
|
|
def __enter__(self):
|
|
""" Use 'with self' to temporarily disable monitoring behaviour """
|
|
self.serial_reader.stop()
|
|
self.console_reader.stop()
|
|
|
|
def __exit__(self, *args, **kwargs):
|
|
""" Use 'with self' to temporarily disable monitoring behaviour """
|
|
self.console_reader.start()
|
|
self.serial_reader.start()
|
|
|
|
def prompt_next_action(self, reason):
|
|
self.console.setup() # set up console to trap input characters
|
|
try:
|
|
red_print("--- {}".format(reason))
|
|
red_print(self.console_parser.get_next_action_text())
|
|
|
|
k = CTRL_T # ignore CTRL-T here, so people can muscle-memory Ctrl-T Ctrl-F, etc.
|
|
while k == CTRL_T:
|
|
k = self.console.getkey()
|
|
finally:
|
|
self.console.cleanup()
|
|
ret = self.console_parser.parse_next_action_key(k)
|
|
if ret is not None:
|
|
cmd = ret[1]
|
|
if cmd == CMD_STOP:
|
|
# the stop command should be handled last
|
|
self.event_queue.put(ret)
|
|
else:
|
|
self.cmd_queue.put(ret)
|
|
|
|
def run_make(self, target):
|
|
with self:
|
|
if isinstance(self.make, list):
|
|
popen_args = self.make + [target]
|
|
else:
|
|
popen_args = [self.make, target]
|
|
yellow_print("Running %s..." % " ".join(popen_args))
|
|
p = subprocess.Popen(popen_args)
|
|
try:
|
|
p.wait()
|
|
except KeyboardInterrupt:
|
|
p.wait()
|
|
if p.returncode != 0:
|
|
self.prompt_next_action("Build failed")
|
|
else:
|
|
self.output_enable(True)
|
|
|
|
def lookup_pc_address(self, pc_addr):
|
|
cmd = ["%saddr2line" % self.toolchain_prefix,
|
|
"-pfiaC", "-e", self.elf_file, pc_addr]
|
|
try:
|
|
translation = subprocess.check_output(cmd, cwd=".")
|
|
if b"?? ??:0" not in translation:
|
|
self._print(translation.decode(), console_printer=yellow_print)
|
|
except OSError as e:
|
|
red_print("%s: %s" % (" ".join(cmd), e))
|
|
|
|
def check_gdbstub_trigger(self, line):
|
|
line = self._gdb_buffer + line
|
|
self._gdb_buffer = b""
|
|
m = re.search(b"\\$(T..)#(..)", line) # look for a gdb "reason" for a break
|
|
if m is not None:
|
|
try:
|
|
chsum = sum(ord(bytes([p])) for p in m.group(1)) & 0xFF
|
|
calc_chsum = int(m.group(2), 16)
|
|
except ValueError:
|
|
return # payload wasn't valid hex digits
|
|
if chsum == calc_chsum:
|
|
self.run_gdb()
|
|
else:
|
|
red_print("Malformed gdb message... calculated checksum %02x received %02x" % (chsum, calc_chsum))
|
|
|
|
def run_gdb(self):
|
|
with self: # disable console control
|
|
sys.stderr.write(ANSI_NORMAL)
|
|
try:
|
|
cmd = ["%sgdb" % self.toolchain_prefix,
|
|
"-ex", "set serial baud %d" % self.serial.baudrate,
|
|
"-ex", "target remote %s" % self.serial.port,
|
|
"-ex", "interrupt", # monitor has already parsed the first 'reason' command, need a second
|
|
self.elf_file]
|
|
process = subprocess.Popen(cmd, cwd=".")
|
|
process.wait()
|
|
except OSError as e:
|
|
red_print("%s: %s" % (" ".join(cmd), e))
|
|
except KeyboardInterrupt:
|
|
pass # happens on Windows, maybe other OSes
|
|
finally:
|
|
try:
|
|
# on Linux, maybe other OSes, gdb sometimes seems to be alive even after wait() returns...
|
|
process.terminate()
|
|
except Exception:
|
|
pass
|
|
try:
|
|
# also on Linux, maybe other OSes, gdb sometimes exits uncleanly and breaks the tty mode
|
|
subprocess.call(["stty", "sane"])
|
|
except Exception:
|
|
pass # don't care if there's no stty, we tried...
|
|
self.prompt_next_action("gdb exited")
|
|
|
|
def output_enable(self, enable):
|
|
self._output_enabled = enable
|
|
|
|
def output_toggle(self):
|
|
self._output_enabled = not self._output_enabled
|
|
yellow_print("\nToggle output display: {}, Type Ctrl-T Ctrl-Y to show/disable output again.".format(self._output_enabled))
|
|
|
|
def toggle_logging(self):
|
|
if self._log_file:
|
|
self.stop_logging()
|
|
else:
|
|
self.start_logging()
|
|
|
|
def start_logging(self):
|
|
if not self._log_file:
|
|
try:
|
|
name = "log.{}.{}.txt".format(os.path.splitext(os.path.basename(self.elf_file))[0],
|
|
datetime.datetime.now().strftime('%Y%m%d%H%M%S'))
|
|
self._log_file = open(name, "wb+")
|
|
yellow_print("\nLogging is enabled into file {}".format(name))
|
|
except Exception as e:
|
|
red_print("\nLog file {} cannot be created: {}".format(name, e))
|
|
|
|
def stop_logging(self):
|
|
if self._log_file:
|
|
try:
|
|
name = self._log_file.name
|
|
self._log_file.close()
|
|
yellow_print("\nLogging is disabled and file {} has been closed".format(name))
|
|
except Exception as e:
|
|
red_print("\nLog file cannot be closed: {}".format(e))
|
|
finally:
|
|
self._log_file = None
|
|
|
|
def _print(self, string, console_printer=None):
|
|
if console_printer is None:
|
|
console_printer = self.console.write_bytes
|
|
if self._output_enabled:
|
|
console_printer(string)
|
|
if self._log_file:
|
|
try:
|
|
if isinstance(string, type(u'')):
|
|
string = string.encode()
|
|
self._log_file.write(string)
|
|
except Exception as e:
|
|
red_print("\nCannot write to file: {}".format(e))
|
|
# don't fill-up the screen with the previous errors (probably consequent prints would fail also)
|
|
self.stop_logging()
|
|
|
|
def handle_commands(self, cmd):
|
|
if cmd == CMD_STOP:
|
|
self.console_reader.stop()
|
|
self.serial_reader.stop()
|
|
elif cmd == CMD_RESET:
|
|
self.serial.setRTS(True)
|
|
self.serial.setDTR(self.serial.dtr) # usbser.sys workaround
|
|
time.sleep(0.2)
|
|
self.serial.setRTS(False)
|
|
self.serial.setDTR(self.serial.dtr) # usbser.sys workaround
|
|
self.output_enable(True)
|
|
elif cmd == CMD_MAKE:
|
|
self.run_make("encrypted-flash" if self.encrypted else "flash")
|
|
elif cmd == CMD_APP_FLASH:
|
|
self.run_make("encrypted-app-flash" if self.encrypted else "app-flash")
|
|
elif cmd == CMD_OUTPUT_TOGGLE:
|
|
self.output_toggle()
|
|
elif cmd == CMD_TOGGLE_LOGGING:
|
|
self.toggle_logging()
|
|
elif cmd == CMD_ENTER_BOOT:
|
|
self.serial.setDTR(False) # IO0=HIGH
|
|
self.serial.setRTS(True) # EN=LOW, chip in reset
|
|
self.serial.setDTR(self.serial.dtr) # usbser.sys workaround
|
|
time.sleep(1.3) # timeouts taken from esptool.py, includes esp32r0 workaround. defaults: 0.1
|
|
self.serial.setDTR(True) # IO0=LOW
|
|
self.serial.setRTS(False) # EN=HIGH, chip out of reset
|
|
self.serial.setDTR(self.serial.dtr) # usbser.sys workaround
|
|
time.sleep(0.45) # timeouts taken from esptool.py, includes esp32r0 workaround. defaults: 0.05
|
|
self.serial.setDTR(False) # IO0=HIGH, done
|
|
else:
|
|
raise RuntimeError("Bad command data %d" % (cmd))
|
|
|
|
|
|
def main():
|
|
|
|
def _get_default_serial_port():
|
|
"""
|
|
Same logic for detecting serial port as esptool.py and idf.py: reverse sort by name and choose the first port.
|
|
"""
|
|
|
|
try:
|
|
ports = list(reversed(sorted(p.device for p in serial.tools.list_ports.comports())))
|
|
return ports[0]
|
|
except Exception:
|
|
return '/dev/ttyUSB0'
|
|
|
|
parser = argparse.ArgumentParser("idf_monitor - a serial output monitor for esp-idf")
|
|
|
|
parser.add_argument(
|
|
'--port', '-p',
|
|
help='Serial port device',
|
|
default=os.environ.get('ESPTOOL_PORT', _get_default_serial_port())
|
|
)
|
|
|
|
parser.add_argument(
|
|
'--baud', '-b',
|
|
help='Serial port baud rate',
|
|
type=int,
|
|
default=os.getenv('IDF_MONITOR_BAUD', os.getenv('MONITORBAUD', 115200)))
|
|
|
|
parser.add_argument(
|
|
'--make', '-m',
|
|
help='Command to run make',
|
|
type=str, default='make')
|
|
|
|
parser.add_argument(
|
|
'--encrypted',
|
|
help='Use encrypted targets while running make',
|
|
action='store_true')
|
|
|
|
parser.add_argument(
|
|
'--toolchain-prefix',
|
|
help="Triplet prefix to add before cross-toolchain names",
|
|
default=DEFAULT_TOOLCHAIN_PREFIX)
|
|
|
|
parser.add_argument(
|
|
"--eol",
|
|
choices=['CR', 'LF', 'CRLF'],
|
|
type=lambda c: c.upper(),
|
|
help="End of line to use when sending to the serial port",
|
|
default='CR')
|
|
|
|
parser.add_argument(
|
|
'elf_file', help='ELF file of application',
|
|
type=argparse.FileType('rb'))
|
|
|
|
parser.add_argument(
|
|
'--print_filter',
|
|
help="Filtering string",
|
|
default=DEFAULT_PRINT_FILTER)
|
|
|
|
args = parser.parse_args()
|
|
|
|
if args.port.startswith("/dev/tty."):
|
|
args.port = args.port.replace("/dev/tty.", "/dev/cu.")
|
|
yellow_print("--- WARNING: Serial ports accessed as /dev/tty.* will hang gdb if launched.")
|
|
yellow_print("--- Using %s instead..." % args.port)
|
|
|
|
serial_instance = serial.serial_for_url(args.port, args.baud,
|
|
do_not_open=True)
|
|
serial_instance.dtr = False
|
|
serial_instance.rts = False
|
|
|
|
args.elf_file.close() # don't need this as a file
|
|
|
|
# remove the parallel jobserver arguments from MAKEFLAGS, as any
|
|
# parent make is only running 1 job (monitor), so we can re-spawn
|
|
# all of the child makes we need (the -j argument remains part of
|
|
# MAKEFLAGS)
|
|
try:
|
|
makeflags = os.environ["MAKEFLAGS"]
|
|
makeflags = re.sub(r"--jobserver[^ =]*=[0-9,]+ ?", "", makeflags)
|
|
os.environ["MAKEFLAGS"] = makeflags
|
|
except KeyError:
|
|
pass # not running a make jobserver
|
|
|
|
monitor = Monitor(serial_instance, args.elf_file.name, args.print_filter, args.make, args.encrypted,
|
|
args.toolchain_prefix, args.eol)
|
|
|
|
yellow_print('--- idf_monitor on {p.name} {p.baudrate} ---'.format(
|
|
p=serial_instance))
|
|
yellow_print('--- Quit: {} | Menu: {} | Help: {} followed by {} ---'.format(
|
|
key_description(monitor.console_parser.exit_key),
|
|
key_description(monitor.console_parser.menu_key),
|
|
key_description(monitor.console_parser.menu_key),
|
|
key_description(CTRL_H)))
|
|
if args.print_filter != DEFAULT_PRINT_FILTER:
|
|
yellow_print('--- Print filter: {} ---'.format(args.print_filter))
|
|
|
|
monitor.main_loop()
|
|
|
|
|
|
if os.name == 'nt':
|
|
# Windows console stuff
|
|
|
|
STD_OUTPUT_HANDLE = -11
|
|
STD_ERROR_HANDLE = -12
|
|
|
|
# wincon.h values
|
|
FOREGROUND_INTENSITY = 8
|
|
FOREGROUND_GREY = 7
|
|
|
|
# matches the ANSI color change sequences that IDF sends
|
|
RE_ANSI_COLOR = re.compile(b'\033\\[([01]);3([0-7])m')
|
|
|
|
# list mapping the 8 ANSI colors (the indexes) to Windows Console colors
|
|
ANSI_TO_WINDOWS_COLOR = [0, 4, 2, 6, 1, 5, 3, 7]
|
|
|
|
GetStdHandle = ctypes.windll.kernel32.GetStdHandle
|
|
SetConsoleTextAttribute = ctypes.windll.kernel32.SetConsoleTextAttribute
|
|
|
|
class ANSIColorConverter(object):
|
|
"""Class to wrap a file-like output stream, intercept ANSI color codes,
|
|
and convert them into calls to Windows SetConsoleTextAttribute.
|
|
|
|
Doesn't support all ANSI terminal code escape sequences, only the sequences IDF uses.
|
|
|
|
Ironically, in Windows this console output is normally wrapped by winpty which will then detect the console text
|
|
color changes and convert these back to ANSI color codes for MSYS' terminal to display. However this is the
|
|
least-bad working solution, as winpty doesn't support any "passthrough" mode for raw output.
|
|
"""
|
|
|
|
def __init__(self, output=None, decode_output=False):
|
|
self.output = output
|
|
self.decode_output = decode_output
|
|
self.handle = GetStdHandle(STD_ERROR_HANDLE if self.output == sys.stderr else STD_OUTPUT_HANDLE)
|
|
self.matched = b''
|
|
|
|
def _output_write(self, data):
|
|
try:
|
|
if self.decode_output:
|
|
self.output.write(data.decode())
|
|
else:
|
|
self.output.write(data)
|
|
except (IOError, OSError):
|
|
# Windows 10 bug since the Fall Creators Update, sometimes writing to console randomly throws
|
|
# an exception (however, the character is still written to the screen)
|
|
# Ref https://github.com/espressif/esp-idf/issues/1163
|
|
#
|
|
# Also possible for Windows to throw an OSError error if the data is invalid for the console
|
|
# (garbage bytes, etc)
|
|
pass
|
|
|
|
def write(self, data):
|
|
if isinstance(data, bytes):
|
|
data = bytearray(data)
|
|
else:
|
|
data = bytearray(data, 'utf-8')
|
|
for b in data:
|
|
b = bytes([b])
|
|
length = len(self.matched)
|
|
if b == b'\033': # ESC
|
|
self.matched = b
|
|
elif (length == 1 and b == b'[') or (1 < length < 7):
|
|
self.matched += b
|
|
if self.matched == ANSI_NORMAL.encode('latin-1'): # reset console
|
|
# Flush is required only with Python3 - switching color before it is printed would mess up the console
|
|
self.flush()
|
|
SetConsoleTextAttribute(self.handle, FOREGROUND_GREY)
|
|
self.matched = b''
|
|
elif len(self.matched) == 7: # could be an ANSI sequence
|
|
m = re.match(RE_ANSI_COLOR, self.matched)
|
|
if m is not None:
|
|
color = ANSI_TO_WINDOWS_COLOR[int(m.group(2))]
|
|
if m.group(1) == b'1':
|
|
color |= FOREGROUND_INTENSITY
|
|
# Flush is required only with Python3 - switching color before it is printed would mess up the console
|
|
self.flush()
|
|
SetConsoleTextAttribute(self.handle, color)
|
|
else:
|
|
self._output_write(self.matched) # not an ANSI color code, display verbatim
|
|
self.matched = b''
|
|
else:
|
|
self._output_write(b)
|
|
self.matched = b''
|
|
|
|
def flush(self):
|
|
try:
|
|
self.output.flush()
|
|
except OSError:
|
|
# Account for Windows Console refusing to accept garbage bytes (serial noise, etc)
|
|
pass
|
|
|
|
|
|
if __name__ == "__main__":
|
|
main()
|