esp-idf/examples/protocols/pppos_client/main/Kconfig.projbuild

147 lines
4.3 KiB
Plaintext

menu "Example Configuration"
choice EXAMPLE_MODEM_DEVICE
prompt "Choose supported modem device (DCE)"
default EXAMPLE_MODEM_DEVICE_BG96
help
Select modem device connected to the ESP DTE.
config EXAMPLE_MODEM_DEVICE_SIM800
bool "SIM800"
help
SIMCom SIM800L is a GSM/GPRS module.
It supports Quad-band 850/900/1800/1900MHz.
config EXAMPLE_MODEM_DEVICE_BG96
bool "BG96"
help
Quectel BG96 is a series of LTE Cat M1/Cat NB1/EGPRS module.
config EXAMPLE_MODEM_DEVICE_SIM7600
bool "SIM7600"
help
SIM7600 is Multi-Band LTE-TDD/LTE-FDD/HSPA+ and GSM/GPRS/EDGE module
endchoice
config EXAMPLE_MODEM_PPP_AUTH_USERNAME
string "Set username for authentication"
default "espressif"
depends on !EXAMPLE_MODEM_PPP_AUTH_NONE
help
Set username for PPP Authentication.
config EXAMPLE_MODEM_PPP_AUTH_PASSWORD
string "Set password for authentication"
default "esp32"
depends on !EXAMPLE_MODEM_PPP_AUTH_NONE
help
Set password for PPP Authentication.
config EXAMPLE_MODEM_PPP_AUTH_NONE
bool "Skip PPP authentication"
default n
help
Set to true for the PPP client to skip authentication
config EXAMPLE_SEND_MSG
bool "Short message (SMS)"
default n
help
Select this, the modem will send a short message before power off.
if EXAMPLE_SEND_MSG
config EXAMPLE_SEND_MSG_PEER_PHONE_NUMBER
string "Peer Phone Number (with area code)"
default "+8610086"
help
Enter the peer phone number that you want to send message to.
endif
config EXAMPLE_UART_ISR_IN_RAM
bool "Use UART ISR in RAM"
default n
select UART_ISR_IN_IRAM
help
Enable placing UART ISR to IRAM.
This options is useful if PPPoS client needs to perform
flash operations (e.g. OTA) while keeping the network operational.
config EXAMPLE_LCP_ECHO
bool "Enable LCP ECHO"
default n
select LWIP_ENABLE_LCP_ECHO
help
Enable this option to make use of LCP keepalive using
LCP_ECHO_INTERVAL and LCP_MAXECHOFAILS to default values
menu "UART Configuration"
config EXAMPLE_MODEM_UART_TX_PIN
int "TXD Pin Number"
default 25
range 0 31
help
Pin number of UART TX.
config EXAMPLE_MODEM_UART_RX_PIN
int "RXD Pin Number"
default 26
range 0 31
help
Pin number of UART RX.
config EXAMPLE_MODEM_UART_RTS_PIN
int "RTS Pin Number"
default 27
range 0 31
help
Pin number of UART RTS.
config EXAMPLE_MODEM_UART_CTS_PIN
int "CTS Pin Number"
default 23
range 0 31
help
Pin number of UART CTS.
config EXAMPLE_MODEM_UART_EVENT_TASK_STACK_SIZE
int "UART Event Task Stack Size"
range 2000 6000
default 3072
help
Stack size of UART event task.
config EXAMPLE_MODEM_UART_EVENT_TASK_PRIORITY
int "UART Event Task Priority"
range 3 22
default 5
help
Priority of UART event task.
config EXAMPLE_MODEM_UART_EVENT_QUEUE_SIZE
int "UART Event Queue Size"
range 10 40
default 30
help
Length of UART event queue.
config EXAMPLE_MODEM_UART_PATTERN_QUEUE_SIZE
int "UART Pattern Queue Size"
range 10 40
default 20
help
Length of UART pattern queue.
config EXAMPLE_MODEM_UART_TX_BUFFER_SIZE
int "UART TX Buffer Size"
range 256 2048
default 512
help
Buffer size of UART TX buffer.
config EXAMPLE_MODEM_UART_RX_BUFFER_SIZE
int "UART RX Buffer Size"
range 256 2048
default 1024
help
Buffer size of UART RX buffer.
endmenu
endmenu