esp-idf/docs/en/hw-reference/esp32/user-guide-devkitm-1.rst
2022-05-07 13:09:41 +08:00

319 lines
9.7 KiB
ReStructuredText

===================
ESP32-DevKitM-1
===================
:link_to_translation:`zh_CN:[中文]`
This user guide will help you get started with ESP32-DevKitM-1 and will also provide more in-depth information.
ESP32-DevKitM-1 is an ESP32-MINI-1(1U)-based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Users can either connect peripherals with jumper wires or mount ESP32-DevKitM-1 on a breadboard.
+---------------------------+-------------------------------+
| |ESP32-DevKitM-1 - front| | |ESP32-DevKitM-1 - isometric| |
+---------------------------+-------------------------------+
| ESP32-DevKitM-1 - front | ESP32-DevKitM-1 - isometric |
+---------------------------+-------------------------------+
.. |ESP32-DevKitM-1 - front| image:: ../../../_static/esp32-DevKitM-1-front.png
.. |ESP32-DevKitM-1 - isometric| image:: ../../../_static/esp32-DevKitM-1-isometric.png
The document consists of the following major sections:
- `Getting started`_: Provides an overview of the ESP32-DevKitM-1 and hardware/software setup instructions to get started.
- `Hardware reference`_: Provides more detailed information about the ESP32-DevKitM-1's hardware.
- `Related Documents`_: Gives links to related documentaiton.
Getting Started
===================
This section describes how to get started with ESP32-DevKitM-1. It begins with a few introductory sections about the ESP32-DevKitM-1, then Section `Start Application Development`_ provides instructions on how to do the initial hardware setup and then how to flash firmware onto the ESP32-DevKitM-1.
Overview
-------------
This is a small and convenient development board that features:
- `ESP32-MINI-1, or ESP32-MINI-1U module <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_
- USB-to-serial programming interface that also provides power supply for the board
- pin headers
- pushbuttons for reset and activation of Firmware Download mode
- a few other components
Contents and Packaging
--------------------------
Retail orders
^^^^^^^^^^^^^^^^^^^^^^^^^^
If you order a few samples, each ESP32-DevKitM-1 comes in an individual package in either antistatic bag or any packaging depending on your retailer.
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
Wholesale Orders
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you order in bulk, the boards come in large cardboard boxes.
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
Description of Components
----------------------------
The following figure and the table below describe the key components, interfaces and controls of the ESP32-DevKitM-1 board. We take the board with a ESP32-MINI-1 module as an example in the following sections.
.. figure:: ../../../_static/esp32-devkitm-1-v1-annotated-photo.png
:align: center
:alt: ESP32-DevKitM-1 - front
:figclass: align-center
ESP32-DevKitM-1 - front
.. list-table::
:widths: 25 75
:header-rows: 1
* - Key Component
- Description
* - On-board module
- ESP32-MINI-1 module or ESP32-MINI-1U module. ESP32-MINI-1 comes with an on-board PCB antenna. ESP32-MINI-1U comes with an external antenna connector. The two modules both have a 4 MB flash in chip package. For details, please see `ESP32-MINI-1 & ESP32-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_.
* - 5 V to 3.3 V LDO
- Power regulator converts 5 V to 3.3 V.
* - Boot Button
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
* - Reset Button
- Reset Button
* - Micro-USB Port
- USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32 chip.
* - USB-to-UART Bridge
- Single USB-UART bridge chip provides transfer rates up to 3 Mbps.
* - 3.3 V Power On LED
- Turns on when the USB is connected to the board. For details, please see the schematics in `Related Documents`_.
* - I/O Connector
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board. Users can program ESP32 chip to enable multiple functions.
Start Application Development
----------------------------------
Before powering up your ESP32-DevKitM-1, please make sure that it is in good condition with no obvious signs of damage.
Required Hardware
^^^^^^^^^^^^^^^^^^^^^^
- ESP32-DevKitM-1
- USB 2.0 cable (Standard-A to Micro-B)
- Computer running Windows, Linux, or macOS
Software Setup
^^^^^^^^^^^^^^^^^^^^^
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your ESP32-DevKitM-1.
.. attention::
ESP32-DevKitM-1 is a board with a single core module, please enable single core mode (:ref:`CONFIG_FREERTOS_UNICORE`) in :ref:`menuconfig <get-started-configure>` before flashing your applications.
Hardware Reference
======================
Block Diagram
----------------------
A block diagram below shows the components of ESP32-DevKitM-1 and their interconnections.
.. figure:: ../../../_static/esp32-DevKitM-1_v1_SystemBlock.png
:align: center
:alt: ESP32-DevKitM-1
:figclass: align-center
ESP32-DevKitM-1
Power Source Select
----------------------
There are three mutually exclusive ways to provide power to the board:
* Micro USB port, default power supply
* 5V and GND header pins
* 3V3 and GND header pins
.. warning::
- The power supply must be provided using **one and only one of the options above**, otherwise the board and/or the power supply source can be damaged.
- Power supply by micro USB port is recommended.
Pin Descriptions
-------------------
The table below provides the Name and Function of pins on both sides of the board. For peripheral pin configurations, please refer to `ESP32 Datasheet`_.
.. list-table::
:header-rows: 1
:widths: 10 12 12 66
* - No.
- Name
- Type
- Function
* - 1
- GND
- P
- Ground
* - 2
- 3V3
- P
- 3.3 V power supply
* - 3
- I36
- I
- GPIO36, ADC1_CH0, RTC_GPIO0
* - 4
- I37
- I
- GPIO37, ADC1_CH1, RTC_GPIO1
* - 5
- I38
- I
- GPIO38, ADC1_CH2, RTC_GPIO2
* - 6
- I39
- I
- GPIO39, ADC1_CH3, RTC_GPIO3
* - 7
- RST
- I
- Reset; High: enable; Low: powers off
* - 8
- I34
- I
- GPIO34, ADC1_CH6, RTC_GPIO4
* - 9
- I35
- I
- GPIO35, ADC1_CH7, RTC_GPIO5
* - 10
- IO32
- I/O
- GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
* - 11
- IO33
- I/O
- GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
* - 12
- IO25
- I/O
- GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
* - 13
- IO26
- I/O
- GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
* - 14
- IO27
- I/O
- GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
* - 15
- IO14
- I/O
- GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
* - 16
- 5V
- P
- 5 V power supply
* - 17
- IO12
- I/O
- GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
* - 18
- IO13
- I/O
- GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
* - 19
- IO15
- I/O
- GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3
* - 20
- IO2
- I/O
- GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
* - 21
- IO0
- I/O
- GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
* - 22
- IO4
- I/O
- GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
* - 23
- IO9
- I/O
- GPIO9, HS1_DATA2, U1RXD, SD_DATA2
* - 24
- IO10
- I/O
- GPIO10, HS1_DATA3, U1TXD, SD_DATA3
* - 25
- IO5
- I/O
- GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK
* - 26
- IO18
- I/O
- GPIO18, HS1_DATA7, VSPICLK
* - 27
- IO23
- I/O
- GPIO23, HS1_STROBE, VSPID
* - 28
- IO19
- I/O
- GPIO19, VSPIQ, U0CTS, EMAC_TXD0
* - 29
- IO22
- I/O
- GPIO22, VSPIWP, U0RTS, EMAC_TXD1
* - 30
- IO21
- I/O
- GPIO21, VSPIHD, EMAC_TX_EN
* - 31
- TXD0
- I/O
- GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
* - 32
- RXD0
- I/O
- GPIO3, U0RXD, CLK_OUT2
Hardware Revision Details
============================
No previous versions available.
Related Documents
============================
* `ESP32-MINI-1 & ESP32-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_ (PDF)
* `ESP32-DevKitM-1 Schematics <https://dl.espressif.com/dl/schematics/SCH_ESP32-DEVKITM-1_V1_20200910A.pdf>`_ (PDF)
* `ESP32-DevKitM-1 PCB layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-DevKitM-1_V1_20200910AE.pdf>`_ (PDF)
* `ESP32-DevKitM-1 layout <https://dl.espressif.com/dl/schematics/ESP32-DevKitM-1_V1.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
* `ESP32 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf>`_ (PDF)
* `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
For other design documentation for the board, please contact us at sales@espressif.com.