alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-20 10:46:02 -04:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
61bf801d0f
esp-idf/components/esp_hw_support/cpu.c
Guillaume Souchere b5bacffbd3 esp_hw_support: allow writing in IRAM when CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT is not set for esp32C2 
when CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT is not set, the PMP rule for esp32c2 shoud allow write access.
Fix esp_cpu_configure_region_protection() in cpu.c accordingly.
2023-01-02 08:41:16 +01:00

949 lines
40 KiB
C
Raw Blame History

/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <stdint.h>
#include <assert.h>
#include "soc/soc.h"
#include "soc/soc_caps.h"
// TODO: IDF-5645
#if CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32H2
#include "soc/lp_aon_reg.h"
#include "soc/pcr_reg.h"
#define SYSTEM_CPU_PER_CONF_REG PCR_CPU_WAITI_CONF_REG
#define SYSTEM_CPU_WAIT_MODE_FORCE_ON PCR_CPU_WAIT_MODE_FORCE_ON
#else
#include "soc/rtc_cntl_reg.h"
#endif
#include "hal/soc_hal.h"
#include "hal/mpu_hal.h"
#include "esp_bit_defs.h"
#include "esp_attr.h"
#include "esp_err.h"
#include "esp_cpu.h"
#include "esp_memory_utils.h"
#include "esp_fault.h"
#if __XTENSA__
#include "xtensa/config/core-isa.h"
#else
#include "soc/system_reg.h" // For SYSTEM_CPU_PER_CONF_REG
#include "soc/dport_access.h" // For Dport access
#include "riscv/semihosting.h"
#include "riscv/csr.h" // For PMP_ENTRY. [refactor-todo] create PMP abstraction in rv_utils.h
#endif
#if SOC_CPU_HAS_FLEXIBLE_INTC
#include "riscv/instruction_decode.h"
#endif
/* --------------------------------------------------- CPU Control -----------------------------------------------------
*
* ------------------------------------------------------------------------------------------------------------------ */
void esp_cpu_stall(int core_id)
{
assert(core_id >= 0 && core_id < SOC_CPU_CORES_NUM);
#if SOC_CPU_CORES_NUM > 1 // We don't allow stalling of the current core
/*
We need to write the value "0x86" to stall a particular core. The write location is split into two separate
bit fields named "c0" and "c1", and the two fields are located in different registers. Each core has its own pair of
"c0" and "c1" bit fields.
Note: This function can be called when the cache is disabled. We use "ternary if" instead of an array so that the
"rodata" of the register masks/shifts will be stored in this function's "rodata" section, instead of the source
file's "rodata" section (see IDF-5214).
*/
int rtc_cntl_c0_m = (core_id == 0) ? RTC_CNTL_SW_STALL_PROCPU_C0_M : RTC_CNTL_SW_STALL_APPCPU_C0_M;
int rtc_cntl_c0_s = (core_id == 0) ? RTC_CNTL_SW_STALL_PROCPU_C0_S : RTC_CNTL_SW_STALL_APPCPU_C0_S;
int rtc_cntl_c1_m = (core_id == 0) ? RTC_CNTL_SW_STALL_PROCPU_C1_M : RTC_CNTL_SW_STALL_APPCPU_C1_M;
int rtc_cntl_c1_s = (core_id == 0) ? RTC_CNTL_SW_STALL_PROCPU_C1_S : RTC_CNTL_SW_STALL_APPCPU_C1_S;
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, rtc_cntl_c0_m);
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, 2 << rtc_cntl_c0_s);
CLEAR_PERI_REG_MASK(RTC_CNTL_SW_CPU_STALL_REG, rtc_cntl_c1_m);
SET_PERI_REG_MASK(RTC_CNTL_SW_CPU_STALL_REG, 0x21 << rtc_cntl_c1_s);
#endif
}
void esp_cpu_unstall(int core_id)
{
assert(core_id >= 0 && core_id < SOC_CPU_CORES_NUM);
#if SOC_CPU_CORES_NUM > 1 // We don't allow stalling of the current core
/*
We need to write clear the value "0x86" to unstall a particular core. The location of this value is split into
two separate bit fields named "c0" and "c1", and the two fields are located in different registers. Each core has
its own pair of "c0" and "c1" bit fields.
Note: This function can be called when the cache is disabled. We use "ternary if" instead of an array so that the
"rodata" of the register masks/shifts will be stored in this function's "rodata" section, instead of the source
file's "rodata" section (see IDF-5214).
*/
int rtc_cntl_c0_m = (core_id == 0) ? RTC_CNTL_SW_STALL_PROCPU_C0_M : RTC_CNTL_SW_STALL_APPCPU_C0_M;
int rtc_cntl_c1_m = (core_id == 0) ? RTC_CNTL_SW_STALL_PROCPU_C1_M : RTC_CNTL_SW_STALL_APPCPU_C1_M;
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, rtc_cntl_c0_m);
CLEAR_PERI_REG_MASK(RTC_CNTL_SW_CPU_STALL_REG, rtc_cntl_c1_m);
#endif
}
void esp_cpu_reset(int core_id)
{
#if CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32H2// TODO: IDF-5645
SET_PERI_REG_MASK(LP_AON_CPUCORE0_CFG_REG, LP_AON_CPU_CORE0_SW_RESET);
#else
assert(core_id >= 0 && core_id < SOC_CPU_CORES_NUM);
#if SOC_CPU_CORES_NUM > 1
/*
Note: This function can be called when the cache is disabled. We use "ternary if" instead of an array so that the
"rodata" of the register masks/shifts will be stored in this function's "rodata" section, instead of the source
file's "rodata" section (see IDF-5214).
*/
int rtc_cntl_rst_m = (core_id == 0) ? RTC_CNTL_SW_PROCPU_RST_M : RTC_CNTL_SW_APPCPU_RST_M;
#else // SOC_CPU_CORES_NUM > 1
int rtc_cntl_rst_m = RTC_CNTL_SW_PROCPU_RST_M;
#endif // SOC_CPU_CORES_NUM > 1
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, rtc_cntl_rst_m);
#endif
}
void esp_cpu_wait_for_intr(void)
{
#if __XTENSA__
xt_utils_wait_for_intr();
#else
// TODO: IDF-5645 (better to implement with ll) C6 register names converted in the #include section at the top
if (esp_cpu_dbgr_is_attached() && DPORT_REG_GET_BIT(SYSTEM_CPU_PER_CONF_REG, SYSTEM_CPU_WAIT_MODE_FORCE_ON) == 0) {
/* when SYSTEM_CPU_WAIT_MODE_FORCE_ON is disabled in WFI mode SBA access to memory does not work for debugger,
so do not enter that mode when debugger is connected */
return;
}
rv_utils_wait_for_intr();
#endif // __XTENSA__
}
/* -------------------------------------------------- CPU Registers ----------------------------------------------------
*
* ------------------------------------------------------------------------------------------------------------------ */
/* ------------------------------------------------- CPU Interrupts ----------------------------------------------------
*
* ------------------------------------------------------------------------------------------------------------------ */
// ---------------- Interrupt Descriptors ------------------
#if SOC_CPU_HAS_FLEXIBLE_INTC
static bool is_intr_num_resv(int intr_num)
{
// Workaround to reserve interrupt number 1 for Wi-Fi, 5,8 for Bluetooth, 6 for "permanently disabled interrupt"
// [TODO: IDF-2465]
uint32_t reserved = BIT(1) | BIT(5) | BIT(6) | BIT(8);
// int_num 0,3,4,7 are inavaliable for PULP cpu
#if CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32H2// TODO: IDF-5728 replace with a better macro name
reserved |= BIT(0) | BIT(3) | BIT(4) | BIT(7);
#endif
if (reserved & BIT(intr_num)) {
return true;
}
extern int _vector_table;
extern int _interrupt_handler;
const intptr_t pc = (intptr_t)(&_vector_table + intr_num);
/* JAL instructions are relative to the PC there are executed from. */
const intptr_t destination = pc + riscv_decode_offset_from_jal_instruction(pc);
return destination != (intptr_t)&_interrupt_handler;
}
void esp_cpu_intr_get_desc(int core_id, int intr_num, esp_cpu_intr_desc_t *intr_desc_ret)
{
intr_desc_ret->priority = 1; //Todo: We should make this -1
intr_desc_ret->type = ESP_CPU_INTR_TYPE_NA;
#if __riscv
intr_desc_ret->flags = is_intr_num_resv(intr_num) ? ESP_CPU_INTR_DESC_FLAG_RESVD : 0;
#else
intr_desc_ret->flags = 0;
#endif
}
#else // SOC_CPU_HAS_FLEXIBLE_INTC
typedef struct {
int priority;
esp_cpu_intr_type_t type;
uint32_t flags[SOC_CPU_CORES_NUM];
} intr_desc_t;
#if SOC_CPU_CORES_NUM > 1
// Note: We currently only have dual core targets, so the table initializer is hard coded
const static intr_desc_t intr_desc_table [SOC_CPU_INTR_NUM] = {
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //0
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //1
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //2
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //3
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, 0 } }, //4
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //5
#if CONFIG_FREERTOS_CORETIMER_0
{ 1, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //6
#else
{ 1, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL, ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //6
#endif
{ 1, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL, ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //7
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //8
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //9
{ 1, ESP_CPU_INTR_TYPE_EDGE, { 0, 0 } }, //10
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL, ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //11
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0} }, //12
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0} }, //13
{ 7, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //14, NMI
#if CONFIG_FREERTOS_CORETIMER_1
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //15
#else
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL, ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //15
#endif
{ 5, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL, ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //16
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //17
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //18
{ 2, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //19
{ 2, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //20
{ 2, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //21
{ 3, ESP_CPU_INTR_TYPE_EDGE, { ESP_CPU_INTR_DESC_FLAG_RESVD, 0 } }, //22
{ 3, ESP_CPU_INTR_TYPE_LEVEL, { 0, 0 } }, //23
{ 4, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, 0 } }, //24
{ 4, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //25
{ 5, ESP_CPU_INTR_TYPE_LEVEL, { 0, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //26
{ 3, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //27
{ 4, ESP_CPU_INTR_TYPE_EDGE, { 0, 0 } }, //28
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL, ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //29
{ 4, ESP_CPU_INTR_TYPE_EDGE, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //30
{ 5, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD, ESP_CPU_INTR_DESC_FLAG_RESVD } }, //31
};
#else // SOC_CPU_CORES_NUM > 1
const static intr_desc_t intr_desc_table [SOC_CPU_INTR_NUM] = {
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //0
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //1
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //2
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //3
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //4
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //5
#if CONFIG_FREERTOS_CORETIMER_0
{ 1, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //6
#else
{ 1, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //6
#endif
{ 1, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //7
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //8
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //9
{ 1, ESP_CPU_INTR_TYPE_EDGE, { 0 } }, //10
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //11
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //12
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //13
{ 7, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //14, NMI
#if CONFIG_FREERTOS_CORETIMER_1
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //15
#else
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //15
#endif
{ 5, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //16
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //17
{ 1, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //18
{ 2, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //19
{ 2, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //20
{ 2, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //21
{ 3, ESP_CPU_INTR_TYPE_EDGE, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //22
{ 3, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //23
{ 4, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //24
{ 4, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //25
{ 5, ESP_CPU_INTR_TYPE_LEVEL, { 0 } }, //26
{ 3, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //27
{ 4, ESP_CPU_INTR_TYPE_EDGE, { 0 } }, //28
{ 3, ESP_CPU_INTR_TYPE_NA, { ESP_CPU_INTR_DESC_FLAG_SPECIAL } }, //29
{ 4, ESP_CPU_INTR_TYPE_EDGE, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //30
{ 5, ESP_CPU_INTR_TYPE_LEVEL, { ESP_CPU_INTR_DESC_FLAG_RESVD } }, //31
};
#endif // SOC_CPU_CORES_NUM > 1
void esp_cpu_intr_get_desc(int core_id, int intr_num, esp_cpu_intr_desc_t *intr_desc_ret)
{
assert(core_id >= 0 && core_id < SOC_CPU_CORES_NUM);
#if SOC_CPU_CORES_NUM == 1
core_id = 0; //If this is a single core target, hard code CPU ID to 0
#endif
intr_desc_ret->priority = intr_desc_table[intr_num].priority;
intr_desc_ret->type = intr_desc_table[intr_num].type;
intr_desc_ret->flags = intr_desc_table[intr_num].flags[core_id];
}
#endif // SOC_CPU_HAS_FLEXIBLE_INTC
/* -------------------------------------------------- Memory Ports -----------------------------------------------------
*
* ------------------------------------------------------------------------------------------------------------------ */
#if SOC_CPU_HAS_PMA
static void esp_cpu_configure_invalid_regions(void)
{
const unsigned PMA_NONE = PMA_EN;
__attribute__((unused)) const unsigned PMA_RW = PMA_EN | PMA_R | PMA_W;
__attribute__((unused)) const unsigned PMA_RX = PMA_EN | PMA_R | PMA_X;
__attribute__((unused)) const unsigned PMA_RWX = PMA_EN | PMA_R | PMA_W | PMA_X;
// 1. Gap at bottom of address space
PMA_ENTRY_SET_TOR(0, SOC_DEBUG_LOW, PMA_TOR | PMA_NONE);
// 2. Gap between debug region & IROM
PMA_ENTRY_SET_TOR(1, SOC_DEBUG_HIGH, PMA_NONE);
PMA_ENTRY_SET_TOR(2, SOC_IROM_MASK_LOW, PMA_TOR | PMA_NONE);
// 3. Gap between ROM & RAM
PMA_ENTRY_SET_TOR(3, SOC_DROM_MASK_HIGH, PMA_NONE);
PMA_ENTRY_SET_TOR(4, SOC_IRAM_LOW, PMA_TOR | PMA_NONE);
// 4. Gap between DRAM and I_Cache
PMA_ENTRY_SET_TOR(5, SOC_IRAM_HIGH, PMA_NONE);
PMA_ENTRY_SET_TOR(6, SOC_IROM_LOW, PMA_TOR | PMA_NONE);
// 5. Gap between D_Cache & LP_RAM
PMA_ENTRY_SET_TOR(7, SOC_DROM_HIGH, PMA_NONE);
PMA_ENTRY_SET_TOR(8, SOC_RTC_IRAM_LOW, PMA_TOR | PMA_NONE);
// 6. Gap between LP memory & peripheral addresses
PMA_ENTRY_SET_TOR(9, SOC_RTC_IRAM_HIGH, PMA_NONE);
PMA_ENTRY_SET_TOR(10, SOC_PERIPHERAL_LOW, PMA_TOR | PMA_NONE);
// 7. End of address space
PMA_ENTRY_SET_TOR(11, SOC_PERIPHERAL_HIGH, PMA_NONE);
PMA_ENTRY_SET_TOR(12, UINT32_MAX, PMA_TOR | PMA_NONE);
}
#endif
#if CONFIG_IDF_TARGET_ESP32 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
void esp_cpu_configure_region_protection(void)
{
/* Note: currently this is configured the same on all Xtensa targets
*
* Both chips have the address space divided into 8 regions, 512MB each.
*/
const int illegal_regions[] = {0, 4, 5, 6, 7}; // 0x00000000, 0x80000000, 0xa0000000, 0xc0000000, 0xe0000000
for (size_t i = 0; i < sizeof(illegal_regions) / sizeof(illegal_regions[0]); ++i) {
mpu_hal_set_region_access(illegal_regions[i], MPU_REGION_ILLEGAL);
}
mpu_hal_set_region_access(1, MPU_REGION_RW); // 0x20000000
}
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H4
void esp_cpu_configure_region_protection(void)
{
/* Notes on implementation:
*
* 1) Note: ESP32-C3/H4 CPU doesn't support overlapping PMP regions
*
* 2) Therefore, we use TOR (top of range) entries to map the whole address
* space, bottom to top.
*
* 3) There are not enough entries to describe all the memory regions 100% accurately.
*
* 4) This means some gaps (invalid memory) are accessible. Priority for extending regions
* to cover gaps is to extend read-only or read-execute regions or read-only regions only
* (executing unmapped addresses should always fault with invalid instruction, read-only means
* stores will correctly fault even if reads may return some invalid value.)
*
* 5) Entries are grouped in order with some static asserts to try and verify everything is
* correct.
*/
const unsigned NONE = PMP_L | PMP_TOR;
const unsigned R = PMP_L | PMP_TOR | PMP_R;
const unsigned RW = PMP_L | PMP_TOR | PMP_R | PMP_W;
const unsigned RX = PMP_L | PMP_TOR | PMP_R | PMP_X;
const unsigned RWX = PMP_L | PMP_TOR | PMP_R | PMP_W | PMP_X;
// 1. Gap at bottom of address space
PMP_ENTRY_SET(0, SOC_DEBUG_LOW, NONE);
// 2. Debug region
PMP_ENTRY_SET(1, SOC_DEBUG_HIGH, RWX);
_Static_assert(SOC_DEBUG_LOW < SOC_DEBUG_HIGH, "Invalid CPU debug region");
// 3. Gap between debug region & DROM (flash cache)
PMP_ENTRY_SET(2, SOC_DROM_LOW, NONE);
_Static_assert(SOC_DEBUG_HIGH < SOC_DROM_LOW, "Invalid PMP entry order");
// 4. DROM (flash cache)
// 5. Gap between DROM & DRAM
// (Note: To save PMP entries these two are merged into one read-only region)
PMP_ENTRY_SET(3, SOC_DRAM_LOW, R);
_Static_assert(SOC_DROM_LOW < SOC_DROM_HIGH, "Invalid DROM region");
_Static_assert(SOC_DROM_HIGH < SOC_DRAM_LOW, "Invalid PMP entry order");
// 6. DRAM
PMP_ENTRY_SET(4, SOC_DRAM_HIGH, RW);
_Static_assert(SOC_DRAM_LOW < SOC_DRAM_HIGH, "Invalid DRAM region");
// 7. Gap between DRAM and Mask DROM
// 8. Mask DROM
// (Note: to save PMP entries these two are merged into one read-only region)
PMP_ENTRY_SET(5, SOC_DROM_MASK_HIGH, R);
_Static_assert(SOC_DRAM_HIGH < SOC_DROM_MASK_LOW, "Invalid PMP entry order");
_Static_assert(SOC_DROM_MASK_LOW < SOC_DROM_MASK_HIGH, "Invalid mask DROM region");
// 9. Gap between mask DROM and mask IROM
// 10. Mask IROM
// (Note: to save PMP entries these two are merged into one RX region)
PMP_ENTRY_SET(6, SOC_IROM_MASK_HIGH, RX);
_Static_assert(SOC_DROM_MASK_HIGH < SOC_IROM_MASK_LOW, "Invalid PMP entry order");
_Static_assert(SOC_IROM_MASK_LOW < SOC_IROM_MASK_HIGH, "Invalid mask IROM region");
// 11. Gap between mask IROM & IRAM
PMP_ENTRY_SET(7, SOC_IRAM_LOW, NONE);
_Static_assert(SOC_IROM_MASK_HIGH < SOC_IRAM_LOW, "Invalid PMP entry order");
// 12. IRAM
PMP_ENTRY_SET(8, SOC_IRAM_HIGH, RWX);
_Static_assert(SOC_IRAM_LOW < SOC_IRAM_HIGH, "Invalid IRAM region");
// 13. Gap between IRAM and IROM
// 14. IROM (flash cache)
// (Note: to save PMP entries these two are merged into one RX region)
PMP_ENTRY_SET(9, SOC_IROM_HIGH, RX);
_Static_assert(SOC_IRAM_HIGH < SOC_IROM_LOW, "Invalid PMP entry order");
_Static_assert(SOC_IROM_LOW < SOC_IROM_HIGH, "Invalid IROM region");
// 15. Gap between IROM & RTC slow memory
PMP_ENTRY_SET(10, SOC_RTC_IRAM_LOW, NONE);
_Static_assert(SOC_IROM_HIGH < SOC_RTC_IRAM_LOW, "Invalid PMP entry order");
// 16. RTC fast memory
PMP_ENTRY_SET(11, SOC_RTC_IRAM_HIGH, RWX);
_Static_assert(SOC_RTC_IRAM_LOW < SOC_RTC_IRAM_HIGH, "Invalid RTC IRAM region");
// 17. Gap between RTC fast memory & peripheral addresses
PMP_ENTRY_SET(12, SOC_PERIPHERAL_LOW, NONE);
_Static_assert(SOC_RTC_IRAM_HIGH < SOC_PERIPHERAL_LOW, "Invalid PMP entry order");
// 18. Peripheral addresses
PMP_ENTRY_SET(13, SOC_PERIPHERAL_HIGH, RW);
_Static_assert(SOC_PERIPHERAL_LOW < SOC_PERIPHERAL_HIGH, "Invalid peripheral region");
// 19. End of address space
PMP_ENTRY_SET(14, UINT32_MAX, NONE); // all but last 4 bytes
PMP_ENTRY_SET(15, UINT32_MAX, PMP_L | PMP_NA4); // last 4 bytes
}
#elif CONFIG_IDF_TARGET_ESP32C2
#if CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT && !BOOTLOADER_BUILD
extern int _iram_end;
extern int _data_start;
#define IRAM_END (int)&_iram_end
#define DRAM_START (int)&_data_start
#else
#define IRAM_END SOC_DIRAM_IRAM_HIGH
#define DRAM_START SOC_DIRAM_DRAM_LOW
#endif
#ifdef BOOTLOADER_BUILD
// Without L bit set
#define CONDITIONAL_NONE 0x0
#define CONDITIONAL_RX PMP_R | PMP_X
#define CONDITIONAL_RW PMP_R | PMP_W
#define CONDITIONAL_RWX PMP_R | PMP_W | PMP_X
#else
// With L bit set
#define CONDITIONAL_NONE NONE
#define CONDITIONAL_RX RX
#define CONDITIONAL_RW RW
#define CONDITIONAL_RWX RWX
#endif
void esp_cpu_configure_region_protection(void)
{
/* Notes on implementation:
*
* 1) ESP32-C2 CPU support overlapping PMP regions, configuration is based on static priority
* feature(lowest numbered entry has highest priority).
*
* 2) Therefore, we use TOR (top of range) and NAOPT entries to map the effective area.
* Finally, define any address without access permission.
*
* 3) 3-15 PMPADDR entries be hardcoded to fixed value, 0-2 PMPADDR be programmed to split ID SRAM
* as IRAM/DRAM. All PMPCFG entryies be available.
*
* 4) Ideally, PMPADDR 0-2 entries should be configured twice, once during bootloader startup and another during app startup.
* However, the CPU currently always executes in machine mode and to enforce these permissions in machine mode, we need
* to set the Lock (L) bit but if set once, it cannot be reconfigured. So, we only configure 0-2 PMPADDR during app startup.
*/
const unsigned NONE = PMP_L ;
const unsigned R = PMP_L | PMP_R;
const unsigned X = PMP_L | PMP_X;
const unsigned RW = PMP_L | PMP_R | PMP_W;
const unsigned RX = PMP_L | PMP_R | PMP_X;
const unsigned RWX = PMP_L | PMP_R | PMP_W | PMP_X;
/* There are 4 configuration scenarios for PMPADDR 0-2
*
* 1. Bootloader build:
* - We cannot set the lock bit as we need to reconfigure it again for the application.
* We configure PMPADDR 0-1 to cover entire valid IRAM range and PMPADDR 2-3 to cover entire valid DRAM range.
*
* 2. Application build with CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT enabled
* - We split the SRAM into IRAM and DRAM such that IRAM region cannot be accessed via DBUS
* and DRAM region cannot be accessed via IBUS. We use _iram_end and _data_start markers to set the boundaries.
* We also lock these entries so the R/W/X permissions are enforced even for machine mode
*
* 3. Application build with CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT disabled
* - The IRAM-DRAM split is not enabled so we just need to ensure that access to only valid address ranges are successful
* so for that we set PMPADDR 0-1 to cover entire valid IRAM range and PMPADDR 2-3 to cover entire DRAM region.
* We also lock these entries so the R/W/X permissions are enforced even for machine mode
*
* 4. CPU is in OCD debug mode
* - The IRAM-DRAM split is not enabled so that OpenOCD can write and execute from IRAM.
* We set PMPADDR 0-1 to cover entire valid IRAM range and PMPADDR 2-3 to cover entire DRAM region.
* We also lock these entries so the R/W/X permissions are enforced even for machine mode
*
* PMPADDR 3-15 are hard-coded and are appicable to both, bootloader and application. So we configure and lock
* these during BOOTLOADER build itself. During application build, reconfiguration of these PMPADDR entries
* are silently ignored by the CPU
*/
if (esp_cpu_dbgr_is_attached()) {
// Anti-FI check that cpu is really in ocd mode
ESP_FAULT_ASSERT(esp_cpu_dbgr_is_attached());
// 1. IRAM
PMP_ENTRY_SET(0, SOC_DIRAM_IRAM_LOW, NONE);
PMP_ENTRY_SET(1, SOC_DIRAM_IRAM_HIGH, PMP_TOR | RWX);
// 2. DRAM
PMP_ENTRY_SET(2, SOC_DIRAM_DRAM_LOW, NONE);
PMP_ENTRY_CFG_SET(3, PMP_TOR | RW);
} else {
// 1. IRAM
PMP_ENTRY_SET(0, SOC_DIRAM_IRAM_LOW, CONDITIONAL_NONE);
#if CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT
PMP_ENTRY_SET(1, IRAM_END, PMP_TOR | CONDITIONAL_RX);
#else
PMP_ENTRY_SET(1, IRAM_END, PMP_TOR | CONDITIONAL_RWX);
#endif
// 2. DRAM
PMP_ENTRY_SET(2, DRAM_START, CONDITIONAL_NONE);
PMP_ENTRY_CFG_SET(3, PMP_TOR | CONDITIONAL_RW);
}
// 3. Debug region
PMP_ENTRY_CFG_SET(4, PMP_NAPOT | RWX);
// 4. DROM (flash dcache)
PMP_ENTRY_CFG_SET(5, PMP_NAPOT | R);
// 5. DROM_MASK
PMP_ENTRY_CFG_SET(6, NONE);
PMP_ENTRY_CFG_SET(7, PMP_TOR | R);
// 6. IROM_MASK
PMP_ENTRY_CFG_SET(8, NONE);
PMP_ENTRY_CFG_SET(9, PMP_TOR | RX);
// 7. IROM (flash icache)
PMP_ENTRY_CFG_SET(10, PMP_NAPOT | RX);
// 8. Peripheral addresses
PMP_ENTRY_CFG_SET(11, PMP_NAPOT | RW);
// 9. SRAM (used as ICache)
PMP_ENTRY_CFG_SET(12, PMP_NAPOT | X);
// 10. no access to any address below(0x0-0xFFFF_FFFF)
PMP_ENTRY_CFG_SET(13, PMP_NA4 | NONE);// last 4 bytes(0xFFFFFFFC)
PMP_ENTRY_CFG_SET(14, NONE);
PMP_ENTRY_CFG_SET(15, PMP_TOR | NONE);
}
#elif CONFIG_IDF_TARGET_ESP32C6
#ifdef BOOTLOADER_BUILD
// Without L bit set
#define CONDITIONAL_NONE 0x0
#define CONDITIONAL_RX PMP_R | PMP_X
#define CONDITIONAL_RW PMP_R | PMP_W
#define CONDITIONAL_RWX PMP_R | PMP_W | PMP_X
#else
// With L bit set
#define CONDITIONAL_NONE PMP_NONE
#define CONDITIONAL_RX PMP_RX
#define CONDITIONAL_RW PMP_RW
#define CONDITIONAL_RWX PMP_RWX
#endif
void esp_cpu_configure_region_protection(void)
{
/* Notes on implementation:
*
* 1) Note: ESP32-C6 CPU doesn't support overlapping PMP regions
*
* 2) ESP32-C6 supports 16 PMA regions so we use this feature to block all the invalid address ranges
*
* 3) We use combination of NAPOT (Naturally Aligned Power Of Two) and TOR (top of range)
* entries to map all the valid address space, bottom to top. This leaves us with some extra PMP entries
* which can be used to provide more granular access
*
* 4) Entries are grouped in order with some static asserts to try and verify everything is
* correct.
*/
/* There are 4 configuration scenarios for SRAM
*
* 1. Bootloader build:
* - We cannot set the lock bit as we need to reconfigure it again for the application.
* We configure PMP to cover entire valid IRAM and DRAM range.
*
* 2. Application build with CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT enabled
* - We split the SRAM into IRAM and DRAM such that IRAM region cannot be written to
* and DRAM region cannot be executed. We use _iram_end and _data_start markers to set the boundaries.
* We also lock these entries so the R/W/X permissions are enforced even for machine mode
*
* 3. Application build with CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT disabled
* - The IRAM-DRAM split is not enabled so we just need to ensure that access to only valid address ranges are successful
* so for that we set PMP to cover entire valid IRAM and DRAM region.
* We also lock these entries so the R/W/X permissions are enforced even for machine mode
*
* 4. CPU is in OCD debug mode
* - The IRAM-DRAM split is not enabled so that OpenOCD can write and execute from IRAM.
* We set PMP to cover entire valid IRAM and DRAM region.
* We also lock these entries so the R/W/X permissions are enforced even for machine mode
*/
const unsigned PMP_NONE = PMP_L;
const unsigned PMP_RW = PMP_L | PMP_R | PMP_W;
const unsigned PMP_RX = PMP_L | PMP_R | PMP_X;
const unsigned PMP_RWX = PMP_L | PMP_R | PMP_W | PMP_X;
//
// Configure all the invalid address regions using PMA
//
esp_cpu_configure_invalid_regions();
//
// Configure all the valid address regions using PMP
//
// 1. Debug region
const uint32_t pmpaddr0 = PMPADDR_NAPOT(SOC_DEBUG_LOW, SOC_DEBUG_HIGH);
PMP_ENTRY_SET(0, pmpaddr0, PMP_NAPOT | PMP_RWX);
_Static_assert(SOC_DEBUG_LOW < SOC_DEBUG_HIGH, "Invalid CPU debug region");
// 2.1 I-ROM
PMP_ENTRY_SET(1, SOC_IROM_MASK_LOW, PMP_NONE);
PMP_ENTRY_SET(2, SOC_IROM_MASK_HIGH, PMP_TOR | PMP_RX);
_Static_assert(SOC_IROM_MASK_LOW < SOC_IROM_MASK_HIGH, "Invalid I-ROM region");
// 2.2 D-ROM
PMP_ENTRY_SET(3, SOC_DROM_MASK_LOW, PMP_NONE);
PMP_ENTRY_SET(4, SOC_DROM_MASK_HIGH, PMP_TOR | PMP_R);
_Static_assert(SOC_DROM_MASK_LOW < SOC_DROM_MASK_HIGH, "Invalid D-ROM region");
if (esp_cpu_dbgr_is_attached()) {
// Anti-FI check that cpu is really in ocd mode
ESP_FAULT_ASSERT(esp_cpu_dbgr_is_attached());
// 5. IRAM and DRAM
const uint32_t pmpaddr5 = PMPADDR_NAPOT(SOC_IRAM_LOW, SOC_IRAM_HIGH);
PMP_ENTRY_SET(5, pmpaddr5, PMP_NAPOT | PMP_RWX);
_Static_assert(SOC_IRAM_LOW < SOC_IRAM_HIGH, "Invalid RAM region");
} else {
#if CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT && !BOOTLOADER_BUILD
extern int _iram_end;
// 5. IRAM and DRAM
PMP_ENTRY_SET(5, SOC_IRAM_LOW, PMP_NONE);
PMP_ENTRY_SET(6, (int)&_iram_end, PMP_TOR | PMP_RX);
PMP_ENTRY_SET(7, SOC_DRAM_HIGH, PMP_TOR | PMP_RW);
#else
// 5. IRAM and DRAM
const uint32_t pmpaddr5 = PMPADDR_NAPOT(SOC_IRAM_LOW, SOC_IRAM_HIGH);
PMP_ENTRY_SET(5, pmpaddr5, PMP_NAPOT | CONDITIONAL_RWX);
_Static_assert(SOC_IRAM_LOW < SOC_IRAM_HIGH, "Invalid RAM region");
#endif
}
// 4. I_Cache (flash)
const uint32_t pmpaddr8 = PMPADDR_NAPOT(SOC_IROM_LOW, SOC_IROM_HIGH);
PMP_ENTRY_SET(8, pmpaddr8, PMP_NAPOT | PMP_RX);
_Static_assert(SOC_IROM_LOW < SOC_IROM_HIGH, "Invalid I_Cache region");
// 5. D_Cache (flash)
const uint32_t pmpaddr9 = PMPADDR_NAPOT(SOC_DROM_LOW, SOC_DROM_HIGH);
PMP_ENTRY_SET(9, pmpaddr9, PMP_NAPOT | PMP_R);
_Static_assert(SOC_DROM_LOW < SOC_DROM_HIGH, "Invalid D_Cache region");
// 6. LP memory
#if CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT && !BOOTLOADER_BUILD
extern int _rtc_text_end;
PMP_ENTRY_SET(10, SOC_RTC_IRAM_LOW, PMP_NONE);
PMP_ENTRY_SET(11, (int)&_rtc_text_end, PMP_TOR | PMP_RX);
PMP_ENTRY_SET(12, SOC_RTC_IRAM_HIGH, PMP_TOR | PMP_RW);
#else
const uint32_t pmpaddr10 = PMPADDR_NAPOT(SOC_RTC_IRAM_LOW, SOC_RTC_IRAM_HIGH);
PMP_ENTRY_SET(10, pmpaddr10, PMP_NAPOT | CONDITIONAL_RWX);
_Static_assert(SOC_RTC_IRAM_LOW < SOC_RTC_IRAM_HIGH, "Invalid RTC IRAM region");
#endif
// 7. Peripheral addresses
const uint32_t pmpaddr13 = PMPADDR_NAPOT(SOC_PERIPHERAL_LOW, SOC_PERIPHERAL_HIGH);
PMP_ENTRY_SET(13, pmpaddr13, PMP_NAPOT | PMP_RW);
_Static_assert(SOC_PERIPHERAL_LOW < SOC_PERIPHERAL_HIGH, "Invalid peripheral region");
}
#elif CONFIG_IDF_TARGET_ESP32H2
// ESP32H2-TODO: IDF-6452
void esp_cpu_configure_region_protection(void)
{
/* Notes on implementation:
*
* 1) Note: ESP32-H2 CPU doesn't support overlapping PMP regions
*
* 2) Therefore, we use TOR (top of range) entries to map the whole address
* space, bottom to top.
*
* 3) There are not enough entries to describe all the memory regions 100% accurately.
*
* 4) This means some gaps (invalid memory) are accessible. Priority for extending regions
* to cover gaps is to extend read-only or read-execute regions or read-only regions only
* (executing unmapped addresses should always fault with invalid instruction, read-only means
* stores will correctly fault even if reads may return some invalid value.)
*
* 5) Entries are grouped in order with some static asserts to try and verify everything is
* correct.
*/
const unsigned NONE = PMP_L | PMP_TOR;
const unsigned RW = PMP_L | PMP_TOR | PMP_R | PMP_W;
const unsigned RX = PMP_L | PMP_TOR | PMP_R | PMP_X;
const unsigned RWX = PMP_L | PMP_TOR | PMP_R | PMP_W | PMP_X;
// 1. Gap at bottom of address space
PMP_ENTRY_SET(0, SOC_DEBUG_LOW, NONE);
// 2. Debug region
PMP_ENTRY_SET(1, SOC_DEBUG_HIGH, RWX);
_Static_assert(SOC_DEBUG_LOW < SOC_DEBUG_HIGH, "Invalid CPU debug region");
// 3. Gap between debug region & IROM
PMP_ENTRY_SET(2, SOC_IROM_MASK_LOW, NONE);
_Static_assert(SOC_DEBUG_HIGH < SOC_IROM_MASK_LOW, "Invalid PMP entry order");
// 4. ROM
PMP_ENTRY_SET(3, SOC_DROM_MASK_HIGH, RX);
_Static_assert(SOC_IROM_MASK_LOW < SOC_DROM_MASK_HIGH, "Invalid ROM region");
// 5. Gap between ROM & RAM
PMP_ENTRY_SET(4, SOC_IRAM_LOW, NONE);
_Static_assert(SOC_DROM_MASK_HIGH < SOC_IRAM_LOW, "Invalid PMP entry order");
// 6. RAM
PMP_ENTRY_SET(5, SOC_IRAM_HIGH, RWX);
_Static_assert(SOC_IRAM_LOW < SOC_IRAM_HIGH, "Invalid RAM region");
// 7. Gap between DRAM and I_Cache
PMP_ENTRY_SET(6, SOC_IROM_LOW, NONE);
_Static_assert(SOC_IRAM_HIGH < SOC_IROM_LOW, "Invalid PMP entry order");
// 8. I_Cache (flash)
PMP_ENTRY_SET(7, SOC_IROM_HIGH, RWX);
_Static_assert(SOC_IROM_LOW < SOC_IROM_HIGH, "Invalid I_Cache region");
// 9. D_Cache (flash)
PMP_ENTRY_SET(8, SOC_DROM_HIGH, RW);
_Static_assert(SOC_DROM_LOW < SOC_DROM_HIGH, "Invalid D_Cache region");
// 10. Gap between D_Cache & LP_RAM
PMP_ENTRY_SET(9, SOC_RTC_IRAM_LOW, NONE);
_Static_assert(SOC_DROM_HIGH < SOC_RTC_IRAM_LOW, "Invalid PMP entry order");
// 16. LP memory
PMP_ENTRY_SET(10, SOC_RTC_IRAM_HIGH, RWX);
_Static_assert(SOC_RTC_IRAM_LOW < SOC_RTC_IRAM_HIGH, "Invalid RTC IRAM region");
// 17. Gap between LP memory & peripheral addresses
PMP_ENTRY_SET(11, SOC_PERIPHERAL_LOW, NONE);
_Static_assert(SOC_RTC_IRAM_HIGH < SOC_PERIPHERAL_LOW, "Invalid PMP entry order");
// 18. Peripheral addresses
PMP_ENTRY_SET(12, SOC_PERIPHERAL_HIGH, RW);
_Static_assert(SOC_PERIPHERAL_LOW < SOC_PERIPHERAL_HIGH, "Invalid peripheral region");
// 19. End of address space
PMP_ENTRY_SET(13, UINT32_MAX, NONE); // all but last 4 bytes
PMP_ENTRY_SET(14, UINT32_MAX, PMP_L | PMP_NA4); // last 4 bytes
}
#endif
/* ---------------------------------------------------- Debugging ------------------------------------------------------
*
* ------------------------------------------------------------------------------------------------------------------ */
// --------------- Breakpoints/Watchpoints -----------------
#if SOC_CPU_BREAKPOINTS_NUM > 0
esp_err_t esp_cpu_set_breakpoint(int bp_num, const void *bp_addr)
{
/*
Todo:
- Check that bp_num is in range
*/
#if __XTENSA__
xt_utils_set_breakpoint(bp_num, (uint32_t)bp_addr);
#else
if (esp_cpu_dbgr_is_attached()) {
/* If we want to set breakpoint which when hit transfers control to debugger
* we need to set `action` in `mcontrol` to 1 (Enter Debug Mode).
* That `action` value is supported only when `dmode` of `tdata1` is set.
* But `dmode` can be modified by debugger only (from Debug Mode).
*
* So when debugger is connected we use special syscall to ask it to set breakpoint for us.
*/
long args[] = {true, bp_num, (long)bp_addr};
int ret = semihosting_call_noerrno(ESP_SEMIHOSTING_SYS_BREAKPOINT_SET, args);
if (ret == 0) {
return ESP_ERR_INVALID_RESPONSE;
}
}
rv_utils_set_breakpoint(bp_num, (uint32_t)bp_addr);
#endif // __XTENSA__
return ESP_OK;
}
esp_err_t esp_cpu_clear_breakpoint(int bp_num)
{
/*
Todo:
- Check if the bp_num is valid
*/
#if __XTENSA__
xt_utils_clear_breakpoint(bp_num);
#else
if (esp_cpu_dbgr_is_attached()) {
// See description in esp_cpu_set_breakpoint()
long args[] = {false, bp_num};
int ret = semihosting_call_noerrno(ESP_SEMIHOSTING_SYS_BREAKPOINT_SET, args);
if (ret == 0) {
return ESP_ERR_INVALID_RESPONSE;
}
}
rv_utils_clear_breakpoint(bp_num);
#endif // __XTENSA__
return ESP_OK;
}
#endif // SOC_CPU_BREAKPOINTS_NUM > 0
#if SOC_CPU_WATCHPOINTS_NUM > 0
esp_err_t esp_cpu_set_watchpoint(int wp_num, const void *wp_addr, size_t size, esp_cpu_watchpoint_trigger_t trigger)
{
/*
Todo:
- Check that wp_num is in range
- Check if the wp_num is already in use
*/
// Check if size is 2^n, where n is in [0...6]
if (size < 1 || size > 64 || (size & (size - 1)) != 0) {
return ESP_ERR_INVALID_ARG;
}
bool on_read = (trigger == ESP_CPU_WATCHPOINT_LOAD || trigger == ESP_CPU_WATCHPOINT_ACCESS);
bool on_write = (trigger == ESP_CPU_WATCHPOINT_STORE || trigger == ESP_CPU_WATCHPOINT_ACCESS);
#if __XTENSA__
xt_utils_set_watchpoint(wp_num, (uint32_t)wp_addr, size, on_read, on_write);
#else
if (esp_cpu_dbgr_is_attached()) {
// See description in esp_cpu_set_breakpoint()
long args[] = {true, wp_num, (long)wp_addr, (long)size,
(long)((on_read ? ESP_SEMIHOSTING_WP_FLG_RD : 0) | (on_write ? ESP_SEMIHOSTING_WP_FLG_WR : 0))
};
int ret = semihosting_call_noerrno(ESP_SEMIHOSTING_SYS_WATCHPOINT_SET, args);
if (ret == 0) {
return ESP_ERR_INVALID_RESPONSE;
}
}
rv_utils_set_watchpoint(wp_num, (uint32_t)wp_addr, size, on_read, on_write);
#endif // __XTENSA__
return ESP_OK;
}
esp_err_t esp_cpu_clear_watchpoint(int wp_num)
{
/*
Todo:
- Check if the wp_num is valid
*/
#if __XTENSA__
xt_utils_clear_watchpoint(wp_num);
#else
if (esp_cpu_dbgr_is_attached()) {
// See description in esp_cpu_dbgr_is_attached()
long args[] = {false, wp_num};
int ret = semihosting_call_noerrno(ESP_SEMIHOSTING_SYS_WATCHPOINT_SET, args);
if (ret == 0) {
return ESP_ERR_INVALID_RESPONSE;
}
}
rv_utils_clear_watchpoint(wp_num);
#endif // __XTENSA__
return ESP_OK;
}
#endif // SOC_CPU_WATCHPOINTS_NUM > 0
/* ------------------------------------------------------ Misc ---------------------------------------------------------
*
* ------------------------------------------------------------------------------------------------------------------ */
#if __XTENSA__ && XCHAL_HAVE_S32C1I && CONFIG_SPIRAM
static DRAM_ATTR uint32_t external_ram_cas_lock = 0;
#endif
bool esp_cpu_compare_and_set(volatile uint32_t *addr, uint32_t compare_value, uint32_t new_value)
{
#if __XTENSA__
bool ret;
#if XCHAL_HAVE_S32C1I && CONFIG_SPIRAM
// Check if the target address is in external RAM
if ((uint32_t)addr >= SOC_EXTRAM_DATA_LOW && (uint32_t)addr < SOC_EXTRAM_DATA_HIGH) {
/* The target address is in external RAM, thus the native CAS instruction cannot be used. Instead, we achieve
atomicity by disabling interrupts and then acquiring an external RAM CAS lock. */
uint32_t intr_level;
__asm__ __volatile__ ("rsil %0, " XTSTR(XCHAL_EXCM_LEVEL) "\n"
: "=r"(intr_level));
if (!xt_utils_compare_and_set(&external_ram_cas_lock, 0, 1)) {
// External RAM CAS lock already taken. Exit
ret = false;
goto exit;
}
// Now we compare and set the target address
ret = (*addr == compare_value);
if (ret) {
*addr = new_value;
}
// Release the external RAM CAS lock
external_ram_cas_lock = 0;
exit:
// Reenable interrupts
__asm__ __volatile__ ("memw \n"
"wsr %0, ps\n"
:: "r"(intr_level));
} else
#endif // XCHAL_HAVE_S32C1I && CONFIG_SPIRAM
{
// The target address is in internal RAM. Use the CPU's native CAS instruction
ret = xt_utils_compare_and_set(addr, compare_value, new_value);
}
return ret;
#else // __XTENSA__
// Single core targets don't have atomic CAS instruction. So access method is the same for internal and external RAM
return rv_utils_compare_and_set(addr, compare_value, new_value);
#endif
}
Reference in New Issue View Git Blame Copy Permalink