esp-idf/components/esp_driver_i2c/i2c_private.h

248 lines
11 KiB
C

/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <stdatomic.h>
#include <sys/queue.h>
#include "esp_err.h"
#include "driver/i2c_types.h"
#include "hal/i2c_hal.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/task.h"
#include "freertos/ringbuf.h"
#include "driver/i2c_slave.h"
#include "esp_private/periph_ctrl.h"
#include "esp_pm.h"
#ifdef __cplusplus
extern "C" {
#endif
#if SOC_PERIPH_CLK_CTRL_SHARED
#define I2C_CLOCK_SRC_ATOMIC() PERIPH_RCC_ATOMIC()
#else
#define I2C_CLOCK_SRC_ATOMIC()
#endif
#if !SOC_RCC_IS_INDEPENDENT
#define I2C_RCC_ATOMIC() PERIPH_RCC_ATOMIC()
#else
#define I2C_RCC_ATOMIC()
#endif
#if CONFIG_I2C_ISR_IRAM_SAFE
#define I2C_MEM_ALLOC_CAPS (MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT)
#else
#define I2C_MEM_ALLOC_CAPS (MALLOC_CAP_DEFAULT)
#endif
// I2C driver object is per-mode, the interrupt source is shared between modes
#if CONFIG_I2C_ISR_IRAM_SAFE
#define I2C_INTR_ALLOC_FLAG (ESP_INTR_FLAG_SHARED | ESP_INTR_FLAG_IRAM | ESP_INTR_FLAG_LOWMED)
#else
#define I2C_INTR_ALLOC_FLAG (ESP_INTR_FLAG_SHARED | ESP_INTR_FLAG_LOWMED)
#endif
#define I2C_ALLOW_INTR_PRIORITY_MASK ESP_INTR_FLAG_LOWMED
#define I2C_PM_LOCK_NAME_LEN_MAX 16
#define I2C_STATIC_OPERATION_ARRAY_MAX 6
#define ACK_VAL 0
#define NACK_VAL 1
#define I2C_TRANS_READ_COMMAND(ack_value) {.ack_val = (ack_value), .op_code = I2C_LL_CMD_READ}
#define I2C_TRANS_WRITE_COMMAND(ack_check) {.ack_en = (ack_check), .op_code = I2C_LL_CMD_WRITE}
#define I2C_TRANS_STOP_COMMAND {.op_code = I2C_LL_CMD_STOP}
#define I2C_TRANS_START_COMMAND {.op_code = I2C_LL_CMD_RESTART}
typedef struct i2c_bus_t i2c_bus_t;
typedef struct i2c_master_bus_t i2c_master_bus_t;
typedef struct i2c_bus_t *i2c_bus_handle_t;
typedef struct i2c_master_dev_t i2c_master_dev_t;
typedef struct i2c_slave_dev_t i2c_slave_dev_t;
typedef enum {
I2C_BUS_MODE_MASTER = 0,
I2C_BUS_MODE_SLAVE = 1,
} i2c_bus_mode_t;
typedef enum {
I2C_SLAVE_FIFO = 0,
I2C_SLAVE_NONFIFO = 1,
} i2c_slave_fifo_mode_t;
enum {
I2C_TRANS_QUEUE_READY,
I2C_TRANS_QUEUE_PROGRESS,
I2C_TRANS_QUEUE_COMPLETE,
I2C_TRANS_QUEUE_MAX,
};
typedef struct {
i2c_ll_hw_cmd_t hw_cmd; // I2C command, defined by hardware
uint8_t *data; // Pointer to data
uint16_t bytes_used; // I2C data has been used
size_t total_bytes; // Total bytes to be transferred
} i2c_operation_t;
typedef struct {
uint32_t device_address; // Address of I2C device
i2c_operation_t *ops; // Pointer to I2C operation structure
size_t cmd_count; // Record how many I2C hardware commands in one transaction
} i2c_transaction_t;
struct i2c_bus_t {
i2c_port_num_t port_num; // Port(Bus) ID, index from 0
portMUX_TYPE spinlock; // To protect pre-group register level concurrency access
i2c_hal_context_t hal; // Hal layer for each port(bus)
i2c_clock_source_t clk_src; // Record the port clock source
uint32_t clk_src_freq_hz; // Record the clock source frequency
int sda_num; // SDA pin number
int scl_num; // SCL pin number
bool pull_up_enable; // Enable pull-ups
intr_handle_t intr_handle; // I2C interrupt handle
esp_pm_lock_handle_t pm_lock; // power manange lock
#if CONFIG_PM_ENABLE
char pm_lock_name[I2C_PM_LOCK_NAME_LEN_MAX]; // pm lock name
#endif
i2c_bus_mode_t bus_mode; // I2C bus mode
};
typedef struct i2c_master_device_list {
i2c_master_dev_t *device;
SLIST_ENTRY(i2c_master_device_list) next;
} i2c_master_device_list_t;
struct i2c_master_bus_t {
i2c_bus_t *base; // bus base class
SemaphoreHandle_t bus_lock_mux; // semaphore to lock bus process
int cmd_idx; //record current command index, for master mode
_Atomic i2c_master_status_t status; // record current command status, for master mode
i2c_master_event_t event; // record current i2c bus event
int rx_cnt; // record current read index, for master mode
i2c_transaction_t i2c_trans; // Pointer to I2C transfer structure
i2c_operation_t i2c_ops[I2C_STATIC_OPERATION_ARRAY_MAX]; // I2C operation array
_Atomic uint16_t trans_idx; // Index of I2C transaction command.
SemaphoreHandle_t cmd_semphr; // Semaphore between task and interrupt, using for synchronizing ISR and I2C task.
QueueHandle_t event_queue; // I2C event queue
uint32_t read_buf_pos; // Read buffer position
bool contains_read; // Whether command array includes read operation, true: yes, otherwise, false.
uint32_t read_len_static; // Read static buffer length
uint32_t w_r_size; // The size send/receive last time.
bool trans_over_buffer; // Data length is more than hardware fifo length, needs interrupt.
bool async_trans; // asynchronous transaction, true after callback is installed.
volatile bool trans_done; // transaction command finish
SLIST_HEAD(i2c_master_device_list_head, i2c_master_device_list) device_list; // I2C device (instance) list
// asnyc trans members
bool async_break; // break transaction loop flag.
i2c_addr_bit_len_t addr_10bits_bus; // Slave address is 10 bits.
size_t queue_size; // I2C transaction queue size.
size_t num_trans_inflight; // Indicates the number of transactions that are undergoing but not recycled to ready_queue
size_t num_trans_inqueue; // Indicates the number of transaction in queue transaction.
void* queues_storage; // storage of transaction queues
bool sent_all; // true if the queue transaction is sent
bool in_progress; // true if current transaction is in progress
bool trans_finish; // true if current command has been sent out.
bool queue_trans; // true if current transaction is in queue
bool new_queue; // true if allow a new queue transaction
QueueHandle_t trans_queues[I2C_TRANS_QUEUE_MAX]; // transaction queues.
StaticQueue_t trans_queue_structs[I2C_TRANS_QUEUE_MAX]; // memory to store the static structure for trans_queues
i2c_operation_t (*i2c_async_ops)[I2C_STATIC_OPERATION_ARRAY_MAX]; // pointer to asynchronous operation(s).
uint32_t ops_prepare_idx; // Index for the operations can be written into `i2c_async_ops` array.
uint32_t ops_cur_size; // Indicates how many operations have already put in `i2c_async_ops`.
i2c_transaction_t i2c_trans_pool[]; // I2C transaction pool.
};
struct i2c_master_dev_t {
i2c_master_bus_t *master_bus; // I2C master bus base class
uint16_t device_address; // I2C device address
uint32_t scl_speed_hz; // SCL clock frequency
i2c_addr_bit_len_t addr_10bits; // Whether I2C device is a 10-bits address device.
i2c_master_callback_t on_trans_done; // I2C master transaction done callback.
void *user_ctx; // Callback user context
};
typedef struct {
bool trans_complete; // Event of transaction complete
bool slave_stretch; // Event of slave stretch happens
bool addr_unmatch; // Event of address unmatched
} i2c_slave_evt_t;
typedef struct {
uint8_t *buffer; // Pointer to the buffer need to be received in ISR
uint32_t rcv_fifo_cnt; // receive fifo count.
} i2c_slave_receive_t;
struct i2c_slave_dev_t {
i2c_bus_t *base; // bus base class
SemaphoreHandle_t slv_rx_mux; // Mutex for slave rx direction
SemaphoreHandle_t slv_tx_mux; // Mutex for slave tx direction
RingbufHandle_t rx_ring_buf; // Handle for rx ringbuffer
RingbufHandle_t tx_ring_buf; // Handle for tx ringbuffer
uint8_t data_buf[SOC_I2C_FIFO_LEN]; // Data buffer for slave
uint32_t trans_data_length; // Send data length
i2c_slave_event_callbacks_t callbacks; // I2C slave callbacks
void *user_ctx; // Callback user context
i2c_slave_fifo_mode_t fifo_mode; // Slave fifo mode.
QueueHandle_t slv_evt_queue; // Event Queue used in slave nonfifo mode.
i2c_slave_evt_t slave_evt; // Slave event structure.
i2c_slave_receive_t receive_desc; // Slave receive descriptor
uint32_t already_receive_len; // Data length already received in ISR.
};
/**
* @brief Acquire I2C bus handle
*
* @param port_num I2C port number.
* @return
* - ESP_OK: Acquire bus handle successfully.
* - ESP_ERR_INVALID_ARG: Argument error.
* - ESP_ERR_INVALID_STATE: Acquire bus invalid state because bus has already acquired.
*/
esp_err_t i2c_acquire_bus_handle(i2c_port_num_t port_num, i2c_bus_handle_t *i2c_new_bus, i2c_bus_mode_t mode);
/**
* @brief Release I2C bus handle
*
* @param i2c_bus I2C bus handle, returned from `i2c_acquire_bus_handle`
* @return ESP_OK: If release successfully
* ESP_ERR_INVALID_STATE: Release bus failed because same bus has been required several times.
* Otherwise: Other reasons.
*/
esp_err_t i2c_release_bus_handle(i2c_bus_handle_t i2c_bus);
/**
* @brief Set clock source for I2C peripheral
*
* @param handle I2C bus handle
* @param clk_src Clock source
* @return
* - ESP_OK: Set clock source successfully
* - ESP_ERR_NOT_SUPPORTED: Set clock source failed because the clk_src is not supported
* - ESP_ERR_INVALID_STATE: Set clock source failed because the clk_src is different from other I2C controller
* - ESP_FAIL: Set clock source failed because of other error
*/
esp_err_t i2c_select_periph_clock(i2c_bus_handle_t handle, i2c_clock_source_t clk_src);
/**
* @brief Set I2C SCL/SDA pins
*
* @param handle I2C bus handle
* @return
* - ESP_OK: I2C set SCL/SDA pins successfully.
* - ESP_ERR_INVALID_ARG: Argument error.
* - Otherwise: Set SCL/SDA IOs error.
*/
esp_err_t i2c_common_set_pins(i2c_bus_handle_t handle);
#ifdef __cplusplus
}
#endif