esp-idf/components/driver/test/test_spi_bus_lock.c
2021-05-24 01:06:17 +02:00

356 lines
11 KiB
C

/*
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include "esp_log.h"
#include "driver/spi_master.h"
#include "driver/gpio.h"
#include "esp_flash_spi_init.h"
#include "test/test_common_spi.h"
#include "unity.h"
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3, ESP32C3)
#if CONFIG_IDF_TARGET_ESP32
// The VSPI pins on UT_T1_ESP_FLASH are connected to a external flash
#define TEST_BUS_PIN_NUM_MISO VSPI_IOMUX_PIN_NUM_MISO
#define TEST_BUS_PIN_NUM_MOSI VSPI_IOMUX_PIN_NUM_MOSI
#define TEST_BUS_PIN_NUM_CLK VSPI_IOMUX_PIN_NUM_CLK
#define TEST_BUS_PIN_NUM_CS VSPI_IOMUX_PIN_NUM_CS
#define TEST_BUS_PIN_NUM_WP VSPI_IOMUX_PIN_NUM_WP
#define TEST_BUS_PIN_NUM_HD VSPI_IOMUX_PIN_NUM_HD
#elif CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
#define TEST_BUS_PIN_NUM_MISO FSPI_IOMUX_PIN_NUM_MISO
#define TEST_BUS_PIN_NUM_MOSI FSPI_IOMUX_PIN_NUM_MOSI
#define TEST_BUS_PIN_NUM_CLK FSPI_IOMUX_PIN_NUM_CLK
#define TEST_BUS_PIN_NUM_CS FSPI_IOMUX_PIN_NUM_CS
#define TEST_BUS_PIN_NUM_WP FSPI_IOMUX_PIN_NUM_WP
#define TEST_BUS_PIN_NUM_HD FSPI_IOMUX_PIN_NUM_HD
#endif
typedef struct {
union {
spi_device_handle_t handle;
esp_flash_t* chip;
};
bool finished;
} task_context_t;
#ifndef CONFIG_ESP32_SPIRAM_SUPPORT
const static char TAG[] = "test_spi";
void spi_task1(void* arg)
{
//task1 send 50 polling transactions, acquire the bus and send another 50
int count=0;
spi_transaction_t t = {
.flags = SPI_TRANS_USE_TXDATA,
.tx_data = { 0x80, 0x12, 0x34, 0x56 },
.length = 4*8,
};
spi_device_handle_t handle = ((task_context_t*)arg)->handle;
for( int j = 0; j < 50; j ++ ) {
TEST_ESP_OK(spi_device_polling_transmit( handle, &t ));
ESP_LOGI(TAG, "task1:%d", count++ );
}
TEST_ESP_OK(spi_device_acquire_bus( handle, portMAX_DELAY ));
for( int j = 0; j < 50; j ++ ) {
TEST_ESP_OK(spi_device_polling_transmit( handle, &t ));
ESP_LOGI(TAG, "task1:%d", count++ );
}
spi_device_release_bus(handle);
ESP_LOGI(TAG, "task1 terminates");
((task_context_t*)arg)->finished = true;
vTaskDelete(NULL);
}
void spi_task2(void* arg)
{
int count=0;
//task2 acquire the bus, send 50 polling transactions and then 50 non-polling
spi_transaction_t t = {
.flags = SPI_TRANS_USE_TXDATA,
.tx_data = { 0x80, 0x12, 0x34, 0x56 },
.length = 4*8,
};
spi_transaction_t *ret_t;
spi_device_handle_t handle = ((task_context_t*)arg)->handle;
TEST_ESP_OK(spi_device_acquire_bus( handle, portMAX_DELAY ));
for (int i = 0; i < 50; i ++) {
TEST_ESP_OK(spi_device_polling_transmit(handle, &t));
ESP_LOGI( TAG, "task2: %d", count++ );
}
for( int j = 0; j < 50; j ++ ) {
TEST_ESP_OK(spi_device_queue_trans(handle, &t, portMAX_DELAY));
}
for( int j = 0; j < 50; j ++ ) {
TEST_ESP_OK(spi_device_get_trans_result(handle, &ret_t, portMAX_DELAY));
assert(ret_t == &t);
ESP_LOGI( TAG, "task2: %d", count++ );
}
spi_device_release_bus(handle);
vTaskDelay(1);
ESP_LOGI(TAG, "task2 terminates");
((task_context_t*)arg)->finished = true;
vTaskDelete(NULL);
}
void spi_task3(void* arg)
{
//task3 send 30 polling transactions, acquire the bus, send 20 polling transactions and then 50 non-polling
int count=0;
spi_transaction_t t = {
.flags = SPI_TRANS_USE_TXDATA,
.tx_data = { 0x80, 0x12, 0x34, 0x56 },
.length = 4*8,
};
spi_transaction_t *ret_t;
spi_device_handle_t handle = ((task_context_t*)arg)->handle;
for (int i = 0; i < 30; i ++) {
TEST_ESP_OK(spi_device_polling_transmit(handle, &t));
ESP_LOGI( TAG, "task3: %d", count++ );
}
TEST_ESP_OK(spi_device_acquire_bus( handle, portMAX_DELAY ));
for (int i = 0; i < 20; i ++) {
TEST_ESP_OK(spi_device_polling_transmit(handle, &t));
ESP_LOGI( TAG, "task3: %d", count++ );
}
for (int j = 0; j < 50; j++) {
TEST_ESP_OK(spi_device_queue_trans(handle, &t, portMAX_DELAY));
}
for (int j = 0; j < 50; j++) {
TEST_ESP_OK(spi_device_get_trans_result(handle, &ret_t, portMAX_DELAY));
assert(ret_t == &t);
ESP_LOGI(TAG, "task3: %d", count++);
}
spi_device_release_bus(handle);
ESP_LOGI(TAG, "task3 terminates");
((task_context_t*)arg)->finished = true;
vTaskDelete(NULL);
}
static void write_large_buffer(esp_flash_t *chip, const esp_partition_t *part, const uint8_t *source, size_t length)
{
printf("Erasing chip %p, %d bytes\n", chip, length);
TEST_ESP_OK(esp_flash_erase_region(chip, part->address, (length + SPI_FLASH_SEC_SIZE) & ~(SPI_FLASH_SEC_SIZE - 1)) );
printf("Writing chip %p, %d bytes from source %p\n", chip, length, source);
// note writing to unaligned address
TEST_ESP_OK(esp_flash_write(chip, source, part->address + 1, length) );
printf("Write done.\n");
}
static void read_and_check(esp_flash_t *chip, const esp_partition_t *part, const uint8_t *source, size_t length)
{
printf("Checking chip %p, %d bytes\n", chip, length);
uint8_t *buf = malloc(length);
TEST_ASSERT_NOT_NULL(buf);
TEST_ESP_OK(esp_flash_read(chip, buf, part->address + 1, length) );
TEST_ASSERT_EQUAL_HEX8_ARRAY(source, buf, length);
free(buf);
// check nothing was written at beginning or end
uint8_t ends[8];
TEST_ESP_OK(esp_flash_read(chip, ends, part->address, sizeof(ends)) );
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[0]);
TEST_ASSERT_EQUAL_HEX8(source[0], ends[1]);
TEST_ESP_OK(esp_flash_read(chip, ends, part->address + length, sizeof(ends)) );
TEST_ASSERT_EQUAL_HEX8(source[length - 1], ends[0]);
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[1]);
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[2]);
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[3]);
}
void spi_task4(void* arg)
{
esp_flash_t *chip = ((task_context_t*)arg)->chip;
// buffer in RAM
const int test_len = 16400;
uint8_t *source_buf = heap_caps_malloc(test_len, MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
TEST_ASSERT_NOT_NULL(source_buf);
srand(676);
for (int i = 0; i < test_len; i++) {
source_buf[i] = rand();
}
ESP_LOGI(TAG, "Testing chip %p...", chip);
const esp_partition_t *part = get_test_data_partition();
TEST_ASSERT(part->size > test_len + 2 + SPI_FLASH_SEC_SIZE);
write_large_buffer(chip, part, source_buf, test_len);
read_and_check(chip, part, source_buf, test_len);
free(source_buf);
ESP_LOGI(TAG, "task4 terminates");
((task_context_t*)arg)->finished = true;
vTaskDelete(NULL);
}
static void test_bus_lock(bool test_flash)
{
task_context_t context1={};
task_context_t context2={};
task_context_t context3={};
task_context_t context4={};
TaskHandle_t task1, task2, task3, task4;
esp_err_t ret;
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
buscfg.miso_io_num = TEST_BUS_PIN_NUM_MISO;
buscfg.mosi_io_num = TEST_BUS_PIN_NUM_MOSI;
buscfg.sclk_io_num = TEST_BUS_PIN_NUM_CLK;
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
devcfg.queue_size = 100;
//Initialize the SPI bus and 3 devices
ret=spi_bus_initialize(TEST_SPI_HOST, &buscfg, 1);
TEST_ESP_OK(ret);
ret=spi_bus_add_device(TEST_SPI_HOST, &devcfg, &context1.handle);
TEST_ESP_OK(ret);
ret=spi_bus_add_device(TEST_SPI_HOST, &devcfg, &context2.handle);
TEST_ESP_OK(ret);
//only have 3 cs pins, leave one for the flash
devcfg.spics_io_num = -1;
ret=spi_bus_add_device(TEST_SPI_HOST, &devcfg, &context3.handle);
TEST_ESP_OK(ret);
esp_flash_spi_device_config_t flash_cfg = {
.host_id = TEST_SPI_HOST,
.cs_id = 2,
.cs_io_num = TEST_BUS_PIN_NUM_CS,
.io_mode = SPI_FLASH_DIO,
.speed = ESP_FLASH_5MHZ,
.input_delay_ns = 0,
};
//Clamp the WP and HD pins to VDD to make it work in DIO mode
gpio_set_direction(TEST_BUS_PIN_NUM_HD, GPIO_MODE_OUTPUT);
gpio_set_direction(TEST_BUS_PIN_NUM_WP, GPIO_MODE_OUTPUT);
gpio_set_level(TEST_BUS_PIN_NUM_HD, 1);
gpio_set_level(TEST_BUS_PIN_NUM_WP, 1);
esp_flash_t *chip;
(void) chip;
if (test_flash) {
ret = spi_bus_add_flash_device(&chip, &flash_cfg);
TEST_ESP_OK(ret);
ret = esp_flash_init(chip);
TEST_ESP_OK(ret);
context4.chip = chip;
}
ESP_LOGI(TAG, "Start testing...");
xTaskCreate( spi_task1, "task1", 4096, &context1, 0, &task1 );
xTaskCreate( spi_task2, "task2", 4096, &context2, 0, &task2 );
xTaskCreate( spi_task3, "task3", 4096, &context3, 0, &task3 );
if (test_flash) {
xTaskCreate( spi_task4, "task4", 2048, &context4, 0, &task4 );
} else {
context4.finished = true;
}
for(;;){
vTaskDelay(10);
if (context1.finished && context2.finished && context3.finished && context4.finished) break;
}
TEST_ESP_OK(spi_bus_remove_device(context1.handle));
TEST_ESP_OK(spi_bus_remove_device(context2.handle));
TEST_ESP_OK(spi_bus_remove_device(context3.handle));
if (test_flash) {
TEST_ESP_OK(spi_bus_remove_flash_device(chip));
}
TEST_ESP_OK(spi_bus_free(TEST_SPI_HOST) );
}
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
//no runners
TEST_CASE("spi bus lock, with flash","[spi][test_env=UT_T1_ESP_FLASH]")
{
test_bus_lock(true);
}
#endif //!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
TEST_CASE("spi bus lock","[spi]")
{
test_bus_lock(false);
}
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
//SPI1 not supported by driver
static IRAM_ATTR esp_err_t test_polling_send(spi_device_handle_t handle)
{
for (int i = 0; i < 10; i++) {
spi_transaction_t trans = {
.length = 16,
.flags = SPI_TRANS_USE_TXDATA | SPI_TRANS_USE_RXDATA,
};
esp_err_t err = spi_device_polling_transmit(handle, &trans);
if (err != ESP_OK) {
return err;
}
}
return ESP_OK;
}
static IRAM_ATTR NOINLINE_ATTR void test_acquire(spi_device_handle_t handle)
{
esp_err_t err = spi_device_acquire_bus(handle, portMAX_DELAY);
if (err == ESP_OK) {
err = test_polling_send(handle);
spi_device_release_bus(handle);
}
TEST_ESP_OK(err);
}
TEST_CASE("spi master can be used on SPI1", "[spi]")
{
spi_device_interface_config_t dev_cfg = {
.mode = 1,
.clock_speed_hz = 1*1000*1000,
.spics_io_num = -1,
.queue_size = 1,
};
spi_device_handle_t handle;
esp_err_t err;
err = spi_bus_add_device(SPI1_HOST, &dev_cfg, &handle);
TEST_ESP_OK(err);
err = test_polling_send(handle);
TEST_ESP_OK(err);
test_acquire(handle);
err = spi_bus_remove_device(handle);
TEST_ESP_OK(err);
}
#endif //!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
//TODO: add a case when a non-polling transaction happened in the bus-acquiring time and then release the bus then queue a new trans
#endif //!CONFIG_ESP32_SPIRAM_SUPPORT
#endif //!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S3, ESP32C3)