esp-idf/components/bt/bluedroid/stack/include/btm_ble_api.h
Tian Hao 0073ff3acd component/bt : add api to set raw adv_data/scan_rsp_data
1. add api to set raw scan response data
2. add api to set raw scan response data
3. update doxygen
4. add menuconfig to config gatt server demo
2017-01-19 17:36:40 +08:00

1959 lines
73 KiB
C

/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the Bluetooth Manager (BTM) API function external
* definitions.
*
******************************************************************************/
#ifndef BTM_BLE_API_H
#define BTM_BLE_API_H
#include "bt_defs.h"
#include "btm_api.h"
#include "gki.h"
#include "bt_common_types.h"
#define CHANNEL_MAP_LEN 5
typedef UINT8 tBTM_BLE_CHNL_MAP[CHANNEL_MAP_LEN];
/* 0x00-0x04 only used for set advertising parameter command */
#define BTM_BLE_CONNECT_EVT 0x00 /* 0x00-0x04 only used for set advertising
parameter command */
#define BTM_BLE_CONNECT_DIR_EVT 0x01 /* Connectable directed advertising */
#define BTM_BLE_DISCOVER_EVT 0x02 /* Scannable undirected advertising */
#define BTM_BLE_NON_CONNECT_EVT 0x03 /* Non connectable undirected advertising */
#define BTM_BLE_CONNECT_LO_DUTY_DIR_EVT 0x04 /* Connectable low duty
cycle directed advertising */
/* 0x00 - 0x05 can be received on adv event type */
#define BTM_BLE_SCAN_RSP_EVT 0x04
#define BTM_BLE_SCAN_REQ_EVT 0x05
#define BTM_BLE_UNKNOWN_EVT 0xff
#define BTM_BLE_UNKNOWN_EVT 0xff
typedef UINT8 tBTM_BLE_EVT;
typedef UINT8 tBTM_BLE_CONN_MODE;
typedef UINT32 tBTM_BLE_REF_VALUE;
#define BTM_BLE_SCAN_MODE_PASS 0
#define BTM_BLE_SCAN_MODE_ACTI 1
#define BTM_BLE_SCAN_MODE_NONE 0xff
typedef UINT8 tBLE_SCAN_MODE;
#define BTM_BLE_BATCH_SCAN_MODE_DISABLE 0
#define BTM_BLE_BATCH_SCAN_MODE_PASS 1
#define BTM_BLE_BATCH_SCAN_MODE_ACTI 2
#define BTM_BLE_BATCH_SCAN_MODE_PASS_ACTI 3
typedef UINT8 tBTM_BLE_BATCH_SCAN_MODE;
/* advertising channel map */
#define BTM_BLE_ADV_CHNL_37 (0x01 << 0)
#define BTM_BLE_ADV_CHNL_38 (0x01 << 1)
#define BTM_BLE_ADV_CHNL_39 (0x01 << 2)
typedef UINT8 tBTM_BLE_ADV_CHNL_MAP;
/*d efault advertising channel map */
#ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP
#define BTM_BLE_DEFAULT_ADV_CHNL_MAP (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39)
#endif
/* advertising filter policy */
#define AP_SCAN_CONN_ALL 0x00 /* default */
#define AP_SCAN_WL_CONN_ALL 0x01
#define AP_SCAN_ALL_CONN_WL 0x02
#define AP_SCAN_CONN_WL 0x03
#define AP_SCAN_CONN_POLICY_MAX 0x04
typedef UINT8 tBTM_BLE_AFP;
/* default advertising filter policy */
#ifndef BTM_BLE_DEFAULT_AFP
#define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL
#endif
/* scanning filter policy */
#define SP_ADV_ALL 0x00 /* 0: accept adv packet from all, directed adv pkt not directed */
/* to local device is ignored */
#define SP_ADV_WL 0x01 /* 1: accept adv packet from device in white list, directed adv */
/* packet not directed to local device is ignored */
#define SP_ADV_ALL_RPA_DIR_ADV 0x02 /* 2: accept adv packet from all, directed adv pkt */
/* not directed to me is ignored except direct adv with RPA */
#define SP_ADV_WL_RPA_DIR_ADV 0x03 /* 3: accept adv packet from device in white list, directed */
/* adv pkt not directed to me is ignored except direct adv */
/* with RPA */
typedef UINT8 tBTM_BLE_SFP;
#ifndef BTM_BLE_DEFAULT_SFP
#define BTM_BLE_DEFAULT_SFP SP_ADV_ALL
#endif
/* adv parameter boundary values */
#define BTM_BLE_ADV_INT_MIN 0x0020
#define BTM_BLE_ADV_INT_MAX 0x4000
/* Full scan boundary values */
#define BTM_BLE_ADV_SCAN_FULL_MIN 0x00
#define BTM_BLE_ADV_SCAN_FULL_MAX 0x64
/* Partial scan boundary values */
#define BTM_BLE_ADV_SCAN_TRUNC_MIN BTM_BLE_ADV_SCAN_FULL_MIN
#define BTM_BLE_ADV_SCAN_TRUNC_MAX BTM_BLE_ADV_SCAN_FULL_MAX
/* Threshold values */
#define BTM_BLE_ADV_SCAN_THR_MIN BTM_BLE_ADV_SCAN_FULL_MIN
#define BTM_BLE_ADV_SCAN_THR_MAX BTM_BLE_ADV_SCAN_FULL_MAX
/* connection parameter boundary values */
#define BTM_BLE_SCAN_INT_MIN 0x0004
#define BTM_BLE_SCAN_INT_MAX 0x4000
#define BTM_BLE_SCAN_WIN_MIN 0x0004
#define BTM_BLE_SCAN_WIN_MAX 0x4000
#define BTM_BLE_EXT_SCAN_INT_MAX 0x00FFFFFF
#define BTM_BLE_EXT_SCAN_WIN_MAX 0xFFFF
#define BTM_BLE_CONN_INT_MIN 0x0006
#define BTM_BLE_CONN_INT_MAX 0x0C80
#define BTM_BLE_CONN_LATENCY_MAX 500
#define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A
#define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80
#define BTM_BLE_CONN_PARAM_UNDEF 0xffff /* use this value when a specific value not to be overwritten */
#define BTM_BLE_SCAN_PARAM_UNDEF 0xffffffff
/* default connection parameters if not configured, use GAP recommend value for auto/selective connection */
/* default scan interval */
#ifndef BTM_BLE_SCAN_FAST_INT
#define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60) = 96 *0.625 */
#endif
/* default scan window for background connection, applicable for auto connection or selective conenction */
#ifndef BTM_BLE_SCAN_FAST_WIN
#define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */
#endif
/* default scan paramter used in reduced power cycle (background scanning) */
#ifndef BTM_BLE_SCAN_SLOW_INT_1
#define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s = 2048 *0.625 */
#endif
#ifndef BTM_BLE_SCAN_SLOW_WIN_1
#define BTM_BLE_SCAN_SLOW_WIN_1 48 /* 30 ms = 48 *0.625 */
#endif
/* default scan paramter used in reduced power cycle (background scanning) */
#ifndef BTM_BLE_SCAN_SLOW_INT_2
#define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s = 4096 *0.625 */
#endif
#ifndef BTM_BLE_SCAN_SLOW_WIN_2
#define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */
#endif
/* default connection interval min */
#ifndef BTM_BLE_CONN_INT_MIN_DEF
#define BTM_BLE_CONN_INT_MIN_DEF 24 /* recommended min: 30ms = 24 * 1.25 */
#endif
/* default connection interval max */
#ifndef BTM_BLE_CONN_INT_MAX_DEF
#define BTM_BLE_CONN_INT_MAX_DEF 40 /* recommended max: 50 ms = 56 * 1.25 */
#endif
/* default slave latency */
#ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF
#define BTM_BLE_CONN_SLAVE_LATENCY_DEF 0 /* 0 */
#endif
/* default supervision timeout */
#ifndef BTM_BLE_CONN_TIMEOUT_DEF
#define BTM_BLE_CONN_TIMEOUT_DEF 2000
#endif
/* minimum acceptable connection interval */
#ifndef BTM_BLE_CONN_INT_MIN_LIMIT
#define BTM_BLE_CONN_INT_MIN_LIMIT 0x0009
#endif
#define BTM_BLE_DIR_CONN_FALLBACK_UNDIR 1
#define BTM_BLE_DIR_CONN_FALLBACK_NO_ADV 2
#ifndef BTM_BLE_DIR_CONN_FALLBACK
#define BTM_BLE_DIR_CONN_FALLBACK BTM_BLE_DIR_CONN_FALLBACK_UNDIR
#endif
#define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */
#define BTM_BLE_AUTH_SIGN_LEN 12 /* BLE data signature length 8 Bytes + 4 bytes counter*/
typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */
#ifndef BTM_BLE_HOST_SUPPORT
#define BTM_BLE_HOST_SUPPORT 0x01
#endif
#ifndef BTM_BLE_SIMULTANEOUS_HOST
#define BTM_BLE_SIMULTANEOUS_HOST 0x01
#endif
/* Appearance Values Reported with BTM_BLE_AD_TYPE_APPEARANCE */
#define BTM_BLE_APPEARANCE_UKNOWN 0x0000
#define BTM_BLE_APPEARANCE_GENERIC_PHONE 0x0040
#define BTM_BLE_APPEARANCE_GENERIC_COMPUTER 0x0080
#define BTM_BLE_APPEARANCE_GENERIC_WATCH 0x00C0
#define BTM_BLE_APPEARANCE_SPORTS_WATCH 0x00C1
#define BTM_BLE_APPEARANCE_GENERIC_CLOCK 0x0100
#define BTM_BLE_APPEARANCE_GENERIC_DISPLAY 0x0140
#define BTM_BLE_APPEARANCE_GENERIC_REMOTE 0x0180
#define BTM_BLE_APPEARANCE_GENERIC_EYEGLASSES 0x01C0
#define BTM_BLE_APPEARANCE_GENERIC_TAG 0x0200
#define BTM_BLE_APPEARANCE_GENERIC_KEYRING 0x0240
#define BTM_BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 0x0280
#define BTM_BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 0x02C0
#define BTM_BLE_APPEARANCE_GENERIC_THERMOMETER 0x0300
#define BTM_BLE_APPEARANCE_THERMOMETER_EAR 0x0301
#define BTM_BLE_APPEARANCE_GENERIC_HEART_RATE 0x0340
#define BTM_BLE_APPEARANCE_HEART_RATE_BELT 0x0341
#define BTM_BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 0x0380
#define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_ARM 0x0381
#define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 0x0382
#define BTM_BLE_APPEARANCE_GENERIC_HID 0x03C0
#define BTM_BLE_APPEARANCE_HID_KEYBOARD 0x03C1
#define BTM_BLE_APPEARANCE_HID_MOUSE 0x03C2
#define BTM_BLE_APPEARANCE_HID_JOYSTICK 0x03C3
#define BTM_BLE_APPEARANCE_HID_GAMEPAD 0x03C4
#define BTM_BLE_APPEARANCE_HID_DIGITIZER_TABLET 0x03C5
#define BTM_BLE_APPEARANCE_HID_CARD_READER 0x03C6
#define BTM_BLE_APPEARANCE_HID_DIGITAL_PEN 0x03C7
#define BTM_BLE_APPEARANCE_HID_BARCODE_SCANNER 0x03C8
#define BTM_BLE_APPEARANCE_GENERIC_GLUCOSE 0x0400
#define BTM_BLE_APPEARANCE_GENERIC_WALKING 0x0440
#define BTM_BLE_APPEARANCE_WALKING_IN_SHOE 0x0441
#define BTM_BLE_APPEARANCE_WALKING_ON_SHOE 0x0442
#define BTM_BLE_APPEARANCE_WALKING_ON_HIP 0x0443
#define BTM_BLE_APPEARANCE_GENERIC_CYCLING 0x0480
#define BTM_BLE_APPEARANCE_CYCLING_COMPUTER 0x0481
#define BTM_BLE_APPEARANCE_CYCLING_SPEED 0x0482
#define BTM_BLE_APPEARANCE_CYCLING_CADENCE 0x0483
#define BTM_BLE_APPEARANCE_CYCLING_POWER 0x0484
#define BTM_BLE_APPEARANCE_CYCLING_SPEED_CADENCE 0x0485
#define BTM_BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 0x0C40
#define BTM_BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 0x0C41
#define BTM_BLE_APPEARANCE_PULSE_OXIMETER_WRIST 0x0C42
#define BTM_BLE_APPEARANCE_GENERIC_WEIGHT 0x0C80
#define BTM_BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS 0x1440
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION 0x1441
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_AND_NAV 0x1442
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD 0x1443
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD_AND_NAV 0x1444
/* Structure returned with Rand/Encrypt complete callback */
typedef struct {
UINT8 status;
UINT8 param_len;
UINT16 opcode;
UINT8 param_buf[BT_OCTET16_LEN];
} tBTM_RAND_ENC;
/* General callback function for notifying an application that a synchronous
** BTM function is complete. The pointer contains the address of any returned data.
*/
typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1);
#define BTM_BLE_FILTER_TARGET_SCANNER 0x01
#define BTM_BLE_FILTER_TARGET_ADVR 0x00
#define BTM_BLE_POLICY_BLACK_ALL 0x00 /* relevant to both */
#define BTM_BLE_POLICY_ALLOW_SCAN 0x01 /* relevant to advertiser */
#define BTM_BLE_POLICY_ALLOW_CONN 0x02 /* relevant to advertiser */
#define BTM_BLE_POLICY_WHITE_ALL 0x03 /* relevant to both */
/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
#define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0)
#define BTM_BLE_GEN_DISC_FLAG (0x01 << 1)
#define BTM_BLE_BREDR_NOT_SPT (0x01 << 2)
/* 4.1 spec adv flag for simultaneous BR/EDR+LE connection support */
#define BTM_BLE_DMT_CONTROLLER_SPT (0x01 << 3)
#define BTM_BLE_DMT_HOST_SPT (0x01 << 4)
#define BTM_BLE_NON_LIMIT_DISC_FLAG (0x00 ) /* lowest bit unset */
#define BTM_BLE_ADV_FLAG_MASK (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG)
#define BTM_BLE_LIMIT_DISC_MASK (BTM_BLE_LIMIT_DISC_FLAG )
#define BTM_BLE_AD_BIT_DEV_NAME (0x00000001 << 0)
#define BTM_BLE_AD_BIT_FLAGS (0x00000001 << 1)
#define BTM_BLE_AD_BIT_MANU (0x00000001 << 2)
#define BTM_BLE_AD_BIT_TX_PWR (0x00000001 << 3)
#define BTM_BLE_AD_BIT_INT_RANGE (0x00000001 << 5)
#define BTM_BLE_AD_BIT_SERVICE (0x00000001 << 6)
#define BTM_BLE_AD_BIT_SERVICE_SOL (0x00000001 << 7)
#define BTM_BLE_AD_BIT_SERVICE_DATA (0x00000001 << 8)
#define BTM_BLE_AD_BIT_SIGN_DATA (0x00000001 << 9)
#define BTM_BLE_AD_BIT_SERVICE_128SOL (0x00000001 << 10)
#define BTM_BLE_AD_BIT_APPEARANCE (0x00000001 << 11)
#define BTM_BLE_AD_BIT_PUBLIC_ADDR (0x00000001 << 12)
#define BTM_BLE_AD_BIT_RANDOM_ADDR (0x00000001 << 13)
#define BTM_BLE_AD_BIT_SERVICE_32 (0x00000001 << 4)
#define BTM_BLE_AD_BIT_SERVICE_32SOL (0x00000001 << 14)
#define BTM_BLE_AD_BIT_PROPRIETARY (0x00000001 << 15)
#define BTM_BLE_AD_BIT_SERVICE_128 (0x00000001 << 16) /*128-bit Service UUIDs*/
typedef UINT32 tBTM_BLE_AD_MASK;
#define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */
#define BTM_BLE_AD_TYPE_16SRV_PART HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */
#define BTM_BLE_AD_TYPE_16SRV_CMPL HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */
#define BTM_BLE_AD_TYPE_32SRV_PART HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */
#define BTM_BLE_AD_TYPE_32SRV_CMPL HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */
#define BTM_BLE_AD_TYPE_128SRV_PART HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */
#define BTM_BLE_AD_TYPE_128SRV_CMPL HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */
#define BTM_BLE_AD_TYPE_NAME_SHORT HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */
#define BTM_BLE_AD_TYPE_NAME_CMPL HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */
#define BTM_BLE_AD_TYPE_TX_PWR HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */
#define BTM_BLE_AD_TYPE_DEV_CLASS 0x0D
#define BTM_BLE_AD_TYPE_SM_TK 0x10
#define BTM_BLE_AD_TYPE_SM_OOB_FLAG 0x11
#define BTM_BLE_AD_TYPE_INT_RANGE 0x12
#define BTM_BLE_AD_TYPE_SOL_SRV_UUID 0x14
#define BTM_BLE_AD_TYPE_128SOL_SRV_UUID 0x15
#define BTM_BLE_AD_TYPE_SERVICE_DATA 0x16
#define BTM_BLE_AD_TYPE_PUBLIC_TARGET 0x17
#define BTM_BLE_AD_TYPE_RANDOM_TARGET 0x18
#define BTM_BLE_AD_TYPE_APPEARANCE 0x19
#define BTM_BLE_AD_TYPE_ADV_INT 0x1a
#define BTM_BLE_AD_TYPE_32SOL_SRV_UUID 0x1b
#define BTM_BLE_AD_TYPE_32SERVICE_DATA 0x1c
#define BTM_BLE_AD_TYPE_128SERVICE_DATA 0x1d
#define BTM_BLE_AD_TYPE_MANU HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xff */
typedef UINT8 tBTM_BLE_AD_TYPE;
/* Security settings used with L2CAP LE COC */
#define BTM_SEC_LE_LINK_ENCRYPTED 0x01
#define BTM_SEC_LE_LINK_PAIRED_WITHOUT_MITM 0x02
#define BTM_SEC_LE_LINK_PAIRED_WITH_MITM 0x04
/* Min/max Preferred number of payload octets that the local Controller
should include in a single Link Layer Data Channel PDU. */
#define BTM_BLE_DATA_SIZE_MAX 0x00fb
#define BTM_BLE_DATA_SIZE_MIN 0x001b
/* Preferred maximum number of microseconds that the local Controller
should use to transmit a single Link Layer Data Channel PDU. */
#define BTM_BLE_DATA_TX_TIME_MIN 0x0148
#define BTM_BLE_DATA_TX_TIME_MAX 0x0848
/* adv tx power level */
#define BTM_BLE_ADV_TX_POWER_MIN 0 /* minimum tx power */
#define BTM_BLE_ADV_TX_POWER_LOW 1 /* low tx power */
#define BTM_BLE_ADV_TX_POWER_MID 2 /* middle tx power */
#define BTM_BLE_ADV_TX_POWER_UPPER 3 /* upper tx power */
#define BTM_BLE_ADV_TX_POWER_MAX 4 /* maximum tx power */
typedef UINT8 tBTM_BLE_ADV_TX_POWER;
/* adv tx power in dBm */
typedef struct {
UINT8 adv_inst_max; /* max adv instance supported in controller */
UINT8 rpa_offloading;
UINT16 tot_scan_results_strg;
UINT8 max_irk_list_sz;
UINT8 filter_support;
UINT8 max_filter;
UINT8 energy_support;
BOOLEAN values_read;
UINT16 version_supported;
UINT16 total_trackable_advertisers;
UINT8 extended_scan_support;
UINT8 debug_logging_supported;
} tBTM_BLE_VSC_CB;
/* slave preferred connection interval range */
typedef struct {
UINT16 low;
UINT16 hi;
} tBTM_BLE_INT_RANGE;
/* Service tag supported in the device */
typedef struct {
UINT8 num_service;
BOOLEAN list_cmpl;
UINT16 *p_uuid;
} tBTM_BLE_SERVICE;
/* 32 bits Service supported in the device */
typedef struct {
UINT8 num_service;
BOOLEAN list_cmpl;
UINT32 *p_uuid;
} tBTM_BLE_32SERVICE;
/* 128 bits Service supported in the device */
typedef struct {
BOOLEAN list_cmpl;
UINT8 uuid128[MAX_UUID_SIZE];
} tBTM_BLE_128SERVICE;
typedef struct {
UINT8 len;
UINT8 *p_val;
} tBTM_BLE_MANU;
typedef struct {
tBT_UUID service_uuid;
UINT8 len;
UINT8 *p_val;
} tBTM_BLE_SERVICE_DATA;
typedef struct {
UINT8 adv_type;
UINT8 len;
UINT8 *p_val; /* number of len byte */
} tBTM_BLE_PROP_ELEM;
typedef struct {
UINT8 num_elem;
tBTM_BLE_PROP_ELEM *p_elem;
} tBTM_BLE_PROPRIETARY;
typedef struct {
tBTM_BLE_INT_RANGE int_range; /* slave prefered conn interval range */
tBTM_BLE_MANU *p_manu; /* manufactuer data */
tBTM_BLE_SERVICE *p_services; /* services */
tBTM_BLE_128SERVICE *p_services_128b; /* 128 bits service */
tBTM_BLE_32SERVICE *p_service_32b; /* 32 bits Service UUID */
tBTM_BLE_SERVICE *p_sol_services; /* 16 bits services Solicitation UUIDs */
tBTM_BLE_32SERVICE *p_sol_service_32b; /* List of 32 bit Service Solicitation UUIDs */
tBTM_BLE_128SERVICE *p_sol_service_128b; /* List of 128 bit Service Solicitation UUIDs */
tBTM_BLE_PROPRIETARY *p_proprietary;
tBTM_BLE_SERVICE_DATA *p_service_data; /* service data */
UINT16 appearance;
UINT8 flag;
UINT8 tx_power;
} tBTM_BLE_ADV_DATA;
#ifndef BTM_BLE_MULTI_ADV_MAX
#define BTM_BLE_MULTI_ADV_MAX 16 /* controller returned adv_inst_max should be less
than this number */
#endif
#define BTM_BLE_MULTI_ADV_INVALID 0
#define BTM_BLE_MULTI_ADV_ENB_EVT 1
#define BTM_BLE_MULTI_ADV_DISABLE_EVT 2
#define BTM_BLE_MULTI_ADV_PARAM_EVT 3
#define BTM_BLE_MULTI_ADV_DATA_EVT 4
typedef UINT8 tBTM_BLE_MULTI_ADV_EVT;
#define BTM_BLE_MULTI_ADV_DEFAULT_STD 0
typedef struct {
UINT16 adv_int_min;
UINT16 adv_int_max;
UINT8 adv_type;
tBTM_BLE_ADV_CHNL_MAP channel_map;
tBTM_BLE_AFP adv_filter_policy;
tBTM_BLE_ADV_TX_POWER tx_power;
} tBTM_BLE_ADV_PARAMS;
typedef struct {
UINT8 *p_sub_code; /* dynamic array to store sub code */
UINT8 *p_inst_id; /* dynamic array to store instance id */
UINT8 pending_idx;
UINT8 next_idx;
} tBTM_BLE_MULTI_ADV_OPQ;
typedef void (tBTM_BLE_MULTI_ADV_CBACK)(tBTM_BLE_MULTI_ADV_EVT evt, UINT8 inst_id,
void *p_ref, tBTM_STATUS status);
typedef struct {
UINT8 inst_id;
BOOLEAN in_use;
UINT8 adv_evt;
BD_ADDR rpa;
TIMER_LIST_ENT raddr_timer_ent;
tBTM_BLE_MULTI_ADV_CBACK *p_cback;
void *p_ref;
UINT8 index;
} tBTM_BLE_MULTI_ADV_INST;
typedef struct {
UINT8 inst_index_queue[BTM_BLE_MULTI_ADV_MAX];
int front;
int rear;
} tBTM_BLE_MULTI_ADV_INST_IDX_Q;
typedef struct {
tBTM_BLE_MULTI_ADV_INST *p_adv_inst; /* dynamic array to store adv instance */
tBTM_BLE_MULTI_ADV_OPQ op_q;
} tBTM_BLE_MULTI_ADV_CB;
typedef UINT8 tGATT_IF;
typedef void (tBTM_BLE_SCAN_THRESHOLD_CBACK)(tBTM_BLE_REF_VALUE ref_value);
typedef void (tBTM_BLE_SCAN_REP_CBACK)(tBTM_BLE_REF_VALUE ref_value, UINT8 report_format,
UINT8 num_records, UINT16 total_len,
UINT8 *p_rep_data, UINT8 status);
typedef void (tBTM_BLE_SCAN_SETUP_CBACK)(UINT8 evt, tBTM_BLE_REF_VALUE ref_value, UINT8 status);
#ifndef BTM_BLE_BATCH_SCAN_MAX
#define BTM_BLE_BATCH_SCAN_MAX 5
#endif
#ifndef BTM_BLE_BATCH_REP_MAIN_Q_SIZE
#define BTM_BLE_BATCH_REP_MAIN_Q_SIZE 2
#endif
typedef enum {
BTM_BLE_SCAN_INVALID_STATE = 0,
BTM_BLE_SCAN_ENABLE_CALLED = 1,
BTM_BLE_SCAN_ENABLED_STATE = 2,
BTM_BLE_SCAN_DISABLE_CALLED = 3,
BTM_BLE_SCAN_DISABLED_STATE = 4
} tBTM_BLE_BATCH_SCAN_STATE;
enum {
BTM_BLE_DISCARD_OLD_ITEMS,
BTM_BLE_DISCARD_LOWER_RSSI_ITEMS
};
typedef UINT8 tBTM_BLE_DISCARD_RULE;
typedef struct {
UINT8 sub_code[BTM_BLE_BATCH_SCAN_MAX];
tBTM_BLE_BATCH_SCAN_STATE cur_state[BTM_BLE_BATCH_SCAN_MAX];
tBTM_BLE_REF_VALUE ref_value[BTM_BLE_BATCH_SCAN_MAX];
UINT8 pending_idx;
UINT8 next_idx;
} tBTM_BLE_BATCH_SCAN_OPQ;
typedef struct {
UINT8 rep_mode[BTM_BLE_BATCH_REP_MAIN_Q_SIZE];
tBTM_BLE_REF_VALUE ref_value[BTM_BLE_BATCH_REP_MAIN_Q_SIZE];
UINT8 num_records[BTM_BLE_BATCH_REP_MAIN_Q_SIZE];
UINT16 data_len[BTM_BLE_BATCH_REP_MAIN_Q_SIZE];
UINT8 *p_data[BTM_BLE_BATCH_REP_MAIN_Q_SIZE];
UINT8 pending_idx;
UINT8 next_idx;
} tBTM_BLE_BATCH_SCAN_REP_Q;
typedef struct {
tBTM_BLE_BATCH_SCAN_STATE cur_state;
tBTM_BLE_BATCH_SCAN_MODE scan_mode;
UINT32 scan_interval;
UINT32 scan_window;
tBLE_ADDR_TYPE addr_type;
tBTM_BLE_DISCARD_RULE discard_rule;
tBTM_BLE_BATCH_SCAN_OPQ op_q;
tBTM_BLE_BATCH_SCAN_REP_Q main_rep_q;
tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback;
tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback;
tBTM_BLE_SCAN_REP_CBACK *p_scan_rep_cback;
tBTM_BLE_REF_VALUE ref_value;
} tBTM_BLE_BATCH_SCAN_CB;
/* filter selection bit index */
#define BTM_BLE_PF_ADDR_FILTER 0
#define BTM_BLE_PF_SRVC_DATA 1
#define BTM_BLE_PF_SRVC_UUID 2
#define BTM_BLE_PF_SRVC_SOL_UUID 3
#define BTM_BLE_PF_LOCAL_NAME 4
#define BTM_BLE_PF_MANU_DATA 5
#define BTM_BLE_PF_SRVC_DATA_PATTERN 6
#define BTM_BLE_PF_TYPE_ALL 7 /* when passed in payload filter type all, only clear action is applicable */
#define BTM_BLE_PF_TYPE_MAX 8
/* max number of filter spot for different filter type */
#ifndef BTM_BLE_MAX_UUID_FILTER
#define BTM_BLE_MAX_UUID_FILTER 8
#endif
#ifndef BTM_BLE_MAX_ADDR_FILTER
#define BTM_BLE_MAX_ADDR_FILTER 8
#endif
#ifndef BTM_BLE_PF_STR_COND_MAX
#define BTM_BLE_PF_STR_COND_MAX 4 /* apply to manu data , or local name */
#endif
#ifndef BTM_BLE_PF_STR_LEN_MAX
#define BTM_BLE_PF_STR_LEN_MAX 29 /* match for first 29 bytes */
#endif
typedef UINT8 tBTM_BLE_PF_COND_TYPE;
#define BTM_BLE_PF_LOGIC_OR 0
#define BTM_BLE_PF_LOGIC_AND 1
typedef UINT8 tBTM_BLE_PF_LOGIC_TYPE;
#define BTM_BLE_PF_ENABLE 1
#define BTM_BLE_PF_CONFIG 2
typedef UINT8 tBTM_BLE_PF_ACTION;
typedef UINT8 tBTM_BLE_PF_FILT_INDEX;
typedef UINT8 tBTM_BLE_PF_AVBL_SPACE;
#define BTM_BLE_PF_BRDCAST_ADDR_FILT 1
#define BTM_BLE_PF_SERV_DATA_CHG_FILT 2
#define BTM_BLE_PF_SERV_UUID 4
#define BTM_BLE_PF_SERV_SOLC_UUID 8
#define BTM_BLE_PF_LOC_NAME_CHECK 16
#define BTM_BLE_PF_MANUF_NAME_CHECK 32
#define BTM_BLE_PF_SERV_DATA_CHECK 64
typedef UINT16 tBTM_BLE_PF_FEAT_SEL;
#define BTM_BLE_PF_LIST_LOGIC_OR 1
#define BTM_BLE_PF_LIST_LOGIC_AND 2
typedef UINT16 tBTM_BLE_PF_LIST_LOGIC_TYPE;
#define BTM_BLE_PF_FILT_LOGIC_OR 0
#define BTM_BLE_PF_FILT_LOGIC_AND 1
typedef UINT16 tBTM_BLE_PF_FILT_LOGIC_TYPE;
typedef UINT8 tBTM_BLE_PF_RSSI_THRESHOLD;
typedef UINT8 tBTM_BLE_PF_DELIVERY_MODE;
typedef UINT16 tBTM_BLE_PF_TIMEOUT;
typedef UINT8 tBTM_BLE_PF_TIMEOUT_CNT;
typedef UINT16 tBTM_BLE_PF_ADV_TRACK_ENTRIES;
typedef struct {
tBTM_BLE_PF_FEAT_SEL feat_seln;
tBTM_BLE_PF_LIST_LOGIC_TYPE logic_type;
tBTM_BLE_PF_FILT_LOGIC_TYPE filt_logic_type;
tBTM_BLE_PF_RSSI_THRESHOLD rssi_high_thres;
tBTM_BLE_PF_RSSI_THRESHOLD rssi_low_thres;
tBTM_BLE_PF_DELIVERY_MODE dely_mode;
tBTM_BLE_PF_TIMEOUT found_timeout;
tBTM_BLE_PF_TIMEOUT lost_timeout;
tBTM_BLE_PF_TIMEOUT_CNT found_timeout_cnt;
tBTM_BLE_PF_ADV_TRACK_ENTRIES num_of_tracking_entries;
} tBTM_BLE_PF_FILT_PARAMS;
enum {
BTM_BLE_SCAN_COND_ADD,
BTM_BLE_SCAN_COND_DELETE,
BTM_BLE_SCAN_COND_CLEAR = 2
};
typedef UINT8 tBTM_BLE_SCAN_COND_OP;
enum {
BTM_BLE_FILT_ENABLE_DISABLE = 1,
BTM_BLE_FILT_CFG = 2,
BTM_BLE_FILT_ADV_PARAM = 3
};
typedef UINT8 tBTM_BLE_FILT_CB_EVT;
/* BLE adv payload filtering config complete callback */
typedef void (tBTM_BLE_PF_CFG_CBACK)(tBTM_BLE_PF_ACTION action, tBTM_BLE_SCAN_COND_OP cfg_op,
tBTM_BLE_PF_AVBL_SPACE avbl_space, tBTM_STATUS status,
tBTM_BLE_REF_VALUE ref_value);
typedef void (tBTM_BLE_PF_CMPL_CBACK) (tBTM_BLE_PF_CFG_CBACK);
/* BLE adv payload filtering status setup complete callback */
typedef void (tBTM_BLE_PF_STATUS_CBACK) (UINT8 action, tBTM_STATUS status,
tBTM_BLE_REF_VALUE ref_value);
/* BLE adv payload filtering param setup complete callback */
typedef void (tBTM_BLE_PF_PARAM_CBACK) (tBTM_BLE_PF_ACTION action_type,
tBTM_BLE_PF_AVBL_SPACE avbl_space,
tBTM_BLE_REF_VALUE ref_value, tBTM_STATUS status);
typedef union {
UINT16 uuid16_mask;
UINT32 uuid32_mask;
UINT8 uuid128_mask[LEN_UUID_128];
} tBTM_BLE_PF_COND_MASK;
typedef struct {
tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */
tBT_UUID uuid; /* UUID condition */
tBTM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */
tBTM_BLE_PF_COND_MASK *p_uuid_mask; /* UUID mask */
} tBTM_BLE_PF_UUID_COND;
typedef struct {
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_data;
} tBTM_BLE_PF_LOCAL_NAME_COND;
typedef struct {
UINT16 company_id; /* company ID */
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_pattern;
UINT16 company_id_mask; /* UUID value mask */
UINT8 *p_pattern_mask; /* Manufacturer data matching mask,
same length as data pattern,
set to all 0xff, match exact data */
} tBTM_BLE_PF_MANU_COND;
typedef struct {
UINT16 uuid; /* service ID */
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_pattern;
UINT8 *p_pattern_mask; /* Service data matching mask, same length as data pattern,
set to all 0xff, match exact data */
} tBTM_BLE_PF_SRVC_PATTERN_COND;
typedef union {
tBLE_BD_ADDR target_addr;
tBTM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */
tBTM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */
tBTM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */
tBTM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */
tBTM_BLE_PF_SRVC_PATTERN_COND srvc_data; /* service data pattern */
} tBTM_BLE_PF_COND_PARAM;
typedef struct {
UINT8 action_ocf[BTM_BLE_PF_TYPE_MAX];
tBTM_BLE_REF_VALUE ref_value[BTM_BLE_PF_TYPE_MAX];
tBTM_BLE_PF_PARAM_CBACK *p_filt_param_cback[BTM_BLE_PF_TYPE_MAX];
tBTM_BLE_PF_CFG_CBACK *p_scan_cfg_cback[BTM_BLE_PF_TYPE_MAX];
UINT8 cb_evt[BTM_BLE_PF_TYPE_MAX];
UINT8 pending_idx;
UINT8 next_idx;
} tBTM_BLE_ADV_FILTER_ADV_OPQ;
#define BTM_BLE_MAX_FILTER_COUNTER (BTM_BLE_MAX_ADDR_FILTER + 1) /* per device filter + one generic filter indexed by 0 */
#ifndef BTM_CS_IRK_LIST_MAX
#define BTM_CS_IRK_LIST_MAX 0x20
#endif
typedef struct {
BOOLEAN in_use;
BD_ADDR bd_addr;
UINT8 pf_counter[BTM_BLE_PF_TYPE_MAX]; /* number of filter indexed by tBTM_BLE_PF_COND_TYPE */
} tBTM_BLE_PF_COUNT;
typedef struct {
BOOLEAN enable;
UINT8 op_type;
tBTM_BLE_PF_COUNT *p_addr_filter_count; /* per BDA filter array */
tBLE_BD_ADDR cur_filter_target;
tBTM_BLE_PF_STATUS_CBACK *p_filt_stat_cback;
tBTM_BLE_ADV_FILTER_ADV_OPQ op_q;
} tBTM_BLE_ADV_FILTER_CB;
/* Sub codes */
#define BTM_BLE_META_PF_ENABLE 0x00
#define BTM_BLE_META_PF_FEAT_SEL 0x01
#define BTM_BLE_META_PF_ADDR 0x02
#define BTM_BLE_META_PF_UUID 0x03
#define BTM_BLE_META_PF_SOL_UUID 0x04
#define BTM_BLE_META_PF_LOCAL_NAME 0x05
#define BTM_BLE_META_PF_MANU_DATA 0x06
#define BTM_BLE_META_PF_SRVC_DATA 0x07
#define BTM_BLE_META_PF_ALL 0x08
typedef UINT8 BTM_BLE_ADV_STATE;
typedef UINT8 BTM_BLE_ADV_INFO_PRESENT;
typedef UINT8 BTM_BLE_RSSI_VALUE;
typedef UINT16 BTM_BLE_ADV_INFO_TIMESTAMP;
/* These are the fields returned in each device adv packet. It
** is returned in the results callback if registered.
*/
typedef struct {
UINT8 conn_mode;
tBTM_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */
UINT8 flag;
UINT8 tx_power_level;
UINT8 remote_name_len;
UINT8 *p_remote_name;
tBTM_BLE_SERVICE service;
} tBTM_BLE_INQ_DATA;
enum {
BTM_BLE_CONN_NONE,
BTM_BLE_CONN_AUTO,
BTM_BLE_CONN_SELECTIVE
};
typedef UINT8 tBTM_BLE_CONN_TYPE;
#define ADV_INFO_PRESENT 0x00
#define NO_ADV_INFO_PRESENT 0x01
typedef btgatt_track_adv_info_t tBTM_BLE_TRACK_ADV_DATA;
typedef void (tBTM_BLE_TRACK_ADV_CBACK)(tBTM_BLE_TRACK_ADV_DATA *p_track_adv_data);
typedef UINT8 tBTM_BLE_TRACK_ADV_EVT;
typedef struct {
tBTM_BLE_REF_VALUE ref_value;
tBTM_BLE_TRACK_ADV_CBACK *p_track_cback;
} tBTM_BLE_ADV_TRACK_CB;
enum {
BTM_BLE_TRACK_ADV_ADD,
BTM_BLE_TRACK_ADV_REMOVE
};
typedef UINT8 tBTM_BLE_TRACK_ADV_ACTION;
#define BTM_BLE_MULTI_ADV_INVALID 0
#define BTM_BLE_BATCH_SCAN_ENABLE_EVT 1
#define BTM_BLE_BATCH_SCAN_CFG_STRG_EVT 2
#define BTM_BLE_BATCH_SCAN_READ_REPTS_EVT 3
#define BTM_BLE_BATCH_SCAN_THR_EVT 4
#define BTM_BLE_BATCH_SCAN_PARAM_EVT 5
#define BTM_BLE_BATCH_SCAN_DISABLE_EVT 6
typedef UINT8 tBTM_BLE_BATCH_SCAN_EVT;
typedef UINT32 tBTM_BLE_TX_TIME_MS;
typedef UINT32 tBTM_BLE_RX_TIME_MS;
typedef UINT32 tBTM_BLE_IDLE_TIME_MS;
typedef UINT32 tBTM_BLE_ENERGY_USED;
typedef void (tBTM_BLE_ENERGY_INFO_CBACK)(tBTM_BLE_TX_TIME_MS tx_time, tBTM_BLE_RX_TIME_MS rx_time,
tBTM_BLE_IDLE_TIME_MS idle_time,
tBTM_BLE_ENERGY_USED energy_used,
tBTM_STATUS status);
typedef struct {
tBTM_BLE_ENERGY_INFO_CBACK *p_ener_cback;
} tBTM_BLE_ENERGY_INFO_CB;
typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name);
typedef void (tBTM_BLE_CTRL_FEATURES_CBACK)(tBTM_STATUS status);
/* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */
typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data);
typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match);
/* random address set complete callback */
typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda);
typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt);
typedef void (*tBLE_SCAN_PARAM_SETUP_CBACK)(tGATT_IF client_if, tBTM_STATUS status);
tBTM_BLE_SCAN_SETUP_CBACK bta_ble_scan_setup_cb;
/*****************************************************************************
** EXTERNAL FUNCTION DECLARATIONS
*****************************************************************************/
/*
#ifdef __cplusplus
extern "C" {
#endif
*/
/*******************************************************************************
**
** Function BTM_SecAddBleDevice
**
** Description Add/modify device. This function will be normally called
** during host startup to restore all required information
** for a LE device stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** bd_name - Name of the peer device. NULL if unknown.
** dev_type - Remote device's device type.
** addr_type - LE device address type.
**
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
//extern
BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name,
tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type);
/*******************************************************************************
**
** Function BTM_SecAddBleKey
**
** Description Add/modify LE device information. This function will be
** normally called during host startup to restore all required
** information stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** p_le_key - LE key values.
** key_type - LE SMP key type.
*
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
//extern
BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key,
tBTM_LE_KEY_TYPE key_type);
/*******************************************************************************
**
** Function BTM_BleSetAdvParams
**
** Description This function is called to set advertising parameters.
**
** Parameters: None.
**
** Returns void
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max,
tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map);
/*******************************************************************************
**
** Function BTM_BleSetAdvParamsStartAdv
**
** Description This function is called to set all of the advertising parameters.
**
** Parameters: None.
**
** Returns void
**
*******************************************************************************/
tBTM_STATUS BTM_BleSetAdvParamsStartAdv(UINT16 adv_int_min, UINT16 adv_int_max, UINT8 adv_type,
tBLE_ADDR_TYPE own_bda_type, tBLE_BD_ADDR *p_dir_bda,
tBTM_BLE_ADV_CHNL_MAP chnl_map, tBTM_BLE_AFP afp);
/*******************************************************************************
**
** Function BTM_BleWriteAdvData
**
** Description This function is called to write advertising data.
**
** Parameters: None.
**
** Returns void
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask,
tBTM_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTM_BleWriteAdvDataRaw
**
** Description This function is called to write raw advertising data.
**
** Parameters: p_raw_adv : point to raw advertising data
** raw_adv_len : raw advertising data
**
** Returns BTM_SUCCESS means success.
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleWriteAdvDataRaw(UINT8 *p_raw_adv, UINT32 raw_adv_len);
BOOLEAN BTM_BleSetRandAddress(BD_ADDR rand_addr);
/*******************************************************************************
**
** Function BTM_BleSetAdvParams
**
** Description This function is called to set advertising parameters.
**
** Parameters adv_int_min: minimum advertising interval
** adv_int_max: maximum advertising interval
** p_dir_bda: connectable direct initiator's LE device address
** chnl_map: advertising channel map.
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max,
tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map);
/*******************************************************************************
**
** Function BTM_BleObtainVendorCapabilities
**
** Description This function is called to obatin vendor capabilties
**
** Parameters p_cmn_vsc_cb - Returns the vednor capabilities
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleObtainVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb);
/*******************************************************************************
**
** Function BTM_BleSetScanParams
**
** Description This function is called to set Scan parameters.
**
** Parameters client_if - Client IF value
** scan_interval - Scan interval
** scan_window - Scan window
** scan_type - Scan type
** scan_setup_status_cback - Scan setup status callback
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleSetScanParams(tGATT_IF client_if, UINT32 scan_interval,
UINT32 scan_window, tBLE_SCAN_MODE scan_type,
tBLE_SCAN_PARAM_SETUP_CBACK scan_setup_status_cback);
/*******************************************************************************
**
** Function BTM_BleSetScanFilterParams
**
** Description This function is called to set Scan Filter & parameters.
**
** Parameters client_if - Client IF value
** scan_interval - Scan interval
** scan_window - Scan window
** scan_type - Scan type
** addr_type_own - owner address type
** scan_filter_policy - scan filter policy
** scan_setup_status_cback - Scan setup status callback
**
** Returns void
**
*******************************************************************************/
void BTM_BleSetScanFilterParams(tGATT_IF client_if, UINT32 scan_interval, UINT32 scan_window,
tBLE_SCAN_MODE scan_mode, UINT8 addr_type_own, tBTM_BLE_SFP scan_filter_policy,
tBLE_SCAN_PARAM_SETUP_CBACK scan_setup_status_cback);
/*******************************************************************************
**
** Function BTM_BleGetVendorCapabilities
**
** Description This function reads local LE features
**
** Parameters p_cmn_vsc_cb : Locala LE capability structure
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleGetVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb);
/*******************************************************************************
**
** Function BTM_BleSetStorageConfig
**
** Description This function is called to setup storage configuration and setup callbacks.
**
** Parameters UINT8 batch_scan_full_max -Batch scan full maximum
UINT8 batch_scan_trunc_max - Batch scan truncated value maximum
UINT8 batch_scan_notify_threshold - Threshold value
tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback - Setup callback
tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback -Threshold callback
void *p_ref - Reference value
**
** Returns tBTM_STATUS
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleSetStorageConfig(UINT8 batch_scan_full_max,
UINT8 batch_scan_trunc_max,
UINT8 batch_scan_notify_threshold,
tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback,
tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback,
tBTM_BLE_SCAN_REP_CBACK *p_cback,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleEnableBatchScan
**
** Description This function is called to enable batch scan
**
** Parameters tBTM_BLE_BATCH_SCAN_MODE scan_mode - Batch scan mode
UINT32 scan_interval -Scan interval
UINT32 scan_window - Scan window value
tBLE_ADDR_TYPE addr_type - Address type
tBTM_BLE_DISCARD_RULE discard_rule - Data discard rules
**
** Returns tBTM_STATUS
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleEnableBatchScan(tBTM_BLE_BATCH_SCAN_MODE scan_mode,
UINT32 scan_interval, UINT32 scan_window,
tBTM_BLE_DISCARD_RULE discard_rule,
tBLE_ADDR_TYPE addr_type,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleDisableBatchScan
**
** Description This function is called to disable batch scanning
**
** Parameters void
**
** Returns void
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleDisableBatchScan(tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleReadScanReports
**
** Description This function is called to read batch scan reports
**
** Parameters tBLE_SCAN_MODE scan_mode - Scan mode report to be read out
tBTM_BLE_SCAN_REP_CBACK* p_cback - Reports callback
**
** Returns tBTM_STATUS
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleReadScanReports(tBLE_SCAN_MODE scan_mode,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleTrackAdvertiser
**
** Description This function is called to read batch scan reports
**
** Parameters p_track_cback - Tracking callback
** ref_value - Reference value
**
** Returns tBTM_STATUS
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleTrackAdvertiser(tBTM_BLE_TRACK_ADV_CBACK *p_track_cback,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleWriteScanRsp
**
** Description This function is called to write LE scan response.
**
** Parameters: p_scan_rsp: scan response.
**
** Returns status
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask,
tBTM_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTM_BleWriteScanRspRaw
**
** Description This function is called to write raw scan response data
**
** Parameters: None.
**
** Returns void
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleWriteScanRspRaw(UINT8 *p_raw_scan_rsp, UINT32 raw_scan_rsp_len);
/*******************************************************************************
**
** Function BTM_BleObserve
**
** Description This procedure keep the device listening for advertising
** events from a broadcast device.
**
** Parameters start: start or stop observe.
**
** Returns void
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration,
tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb);
/*******************************************************************************
**
** Function BTM_GetDeviceIDRoot
**
** Description This function is called to read the local device identity
** root.
**
** Returns void
** the local device ER is copied into er
**
*******************************************************************************/
//extern
void BTM_GetDeviceIDRoot (BT_OCTET16 ir);
/*******************************************************************************
**
** Function BTM_GetDeviceEncRoot
**
** Description This function is called to read the local device encryption
** root.
**
** Returns void
** the local device ER is copied into er
**
*******************************************************************************/
//extern
void BTM_GetDeviceEncRoot (BT_OCTET16 er);
/*******************************************************************************
**
** Function BTM_GetDeviceDHK
**
** Description This function is called to read the local device DHK.
**
** Returns void
** the local device DHK is copied into dhk
**
*******************************************************************************/
//extern
void BTM_GetDeviceDHK (BT_OCTET16 dhk);
/*******************************************************************************
**
** Function BTM_SecurityGrant
**
** Description This function is called to grant security process.
**
** Parameters bd_addr - peer device bd address.
** res - result of the operation BTM_SUCCESS if success.
** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts.
**
** Returns None
**
*******************************************************************************/
//extern
void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res);
/*******************************************************************************
**
** Function BTM_BlePasskeyReply
**
** Description This function is called after Security Manager submitted
** passkey request to the application.
**
** Parameters: bd_addr - Address of the device for which passkey was requested
** res - result of the operation SMP_SUCCESS if success
** passkey - numeric value in the range of
** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
**
*******************************************************************************/
//extern
void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey);
/*******************************************************************************
**
** Function BTM_BleConfirmReply
**
** Description This function is called after Security Manager submitted
** numeric comparison request to the application.
**
** Parameters: bd_addr - Address of the device with which numeric
** comparison was requested
** res - comparison result BTM_SUCCESS if success
**
*******************************************************************************/
//extern
void BTM_BleConfirmReply (BD_ADDR bd_addr, UINT8 res);
/*******************************************************************************
**
** Function BTM_LeOobDataReply
**
** Description This function is called to provide the OOB data for
** SMP in response to BTM_LE_OOB_REQ_EVT
**
** Parameters: bd_addr - Address of the peer device
** res - result of the operation SMP_SUCCESS if success
** p_data - simple pairing Randomizer C.
**
*******************************************************************************/
//extern
void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data);
/*******************************************************************************
**
** Function BTM_BleDataSignature
**
** Description This function is called to sign the data using AES128 CMAC
** algorith.
**
** Parameter bd_addr: target device the data to be signed for.
** p_text: singing data
** len: length of the signing data
** signature: output parameter where data signature is going to
** be stored.
**
** Returns TRUE if signing sucessul, otherwise FALSE.
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len,
BLE_SIGNATURE signature);
/*******************************************************************************
**
** Function BTM_BleVerifySignature
**
** Description This function is called to verify the data signature
**
** Parameter bd_addr: target device the data to be signed for.
** p_orig: original data before signature.
** len: length of the signing data
** counter: counter used when doing data signing
** p_comp: signature to be compared against.
** Returns TRUE if signature verified correctly; otherwise FALSE.
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig,
UINT16 len, UINT32 counter,
UINT8 *p_comp);
/*******************************************************************************
**
** Function BTM_ReadConnectionAddr
**
** Description This function is called to set the local device random address
** .
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr,
tBLE_ADDR_TYPE *p_addr_type);
/*******************************************************************************
**
** Function BTM_ReadRemoteConnectionAddr
**
** Description This function is read the remote device address currently used
** .
**
** Returns void
**
*******************************************************************************/
//extern
BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr,
BD_ADDR conn_addr,
tBLE_ADDR_TYPE *p_addr_type);
/*******************************************************************************
**
** Function BTM_BleLoadLocalKeys
**
** Description Local local identity key, encryption root or sign counter.
**
** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER
** or BTM_BLE_KEY_TYPE_COUNTER.
** p_key: pointer to the key.
*
** Returns non2.
**
*******************************************************************************/
//extern
void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key);
/*******************************************************************************
**
** Function BTM_BleSetBgConnType
**
** Description This function is called to set BLE background connection
** procedure type. It can be auto connection, or selective connection.
**
** Parameters conn_type: it can be auto connection, or selective connection.
** p_select_cback: callback function when selective connection procedure
** is being used.
**
** Returns void
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type,
tBTM_BLE_SEL_CBACK *p_select_cback);
/*******************************************************************************
**
** Function BTM_BleUpdateBgConnDev
**
** Description This function is called to add or remove a device into/from
** background connection procedure. The background connection
* procedure is decided by the background connection type, it can be
* auto connection, or selective connection.
**
** Parameters add_remove: TRUE to add; FALSE to remove.
** remote_bda: device address to add/remove.
**
** Returns void
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda);
/*******************************************************************************
**
** Function BTM_BleClearBgConnDev
**
** Description This function is called to clear the whitelist,
** end any pending whitelist connections,
* and reset the local bg device list.
**
** Parameters void
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleClearBgConnDev(void);
/********************************************************
**
** Function BTM_BleSetPrefConnParams
**
** Description Set a peripheral's preferred connection parameters. When
** any of the value does not want to be updated while others
** do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to
** leave untouched.
**
** Parameters: bd_addr - BD address of the peripheral
** min_conn_int - minimum preferred connection interval
** max_conn_int - maximum preferred connection interval
** slave_latency - preferred slave latency
** supervision_tout - preferred supervision timeout
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
UINT16 min_conn_int, UINT16 max_conn_int,
UINT16 slave_latency, UINT16 supervision_tout);
/******************************************************************************
**
** Function BTM_BleSetConnScanParams
**
** Description Set scan parameters used in BLE connection request
**
** Parameters: scan_interval - scan interval
** scan_window - scan window
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleSetConnScanParams (UINT32 scan_interval, UINT32 scan_window);
/******************************************************************************
**
** Function BTM_BleReadControllerFeatures
**
** Description Reads BLE specific controller features
**
** Parameters: tBTM_BLE_CTRL_FEATURES_CBACK : Callback to notify when features are read
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleReadControllerFeatures(tBTM_BLE_CTRL_FEATURES_CBACK *p_vsc_cback);
/*******************************************************************************
**
** Function BTM_CheckAdvData
**
** Description This function is called to get ADV data for a specific type.
**
** Parameters p_adv - pointer of ADV data
** type - finding ADV data type
** p_length - return the length of ADV data not including type
**
** Returns pointer of ADV data
**
*******************************************************************************/
//extern
UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length);
/*******************************************************************************
**
** Function BTM__BLEReadDiscoverability
**
** Description This function is called to read the current LE discoverability
** mode of the device.
**
** Returns BTM_BLE_NON_DISCOVERABLE ,BTM_BLE_LIMITED_DISCOVERABLE or
** BTM_BLE_GENRAL_DISCOVERABLE
**
*******************************************************************************/
UINT16 BTM_BleReadDiscoverability();
/*******************************************************************************
**
** Function BTM__BLEReadConnectability
**
** Description This function is called to read the current LE connectibility
** mode of the device.
**
** Returns BTM_BLE_NON_CONNECTABLE or BTM_BLE_CONNECTABLE
**
*******************************************************************************/
//extern
UINT16 BTM_BleReadConnectability ();
/*******************************************************************************
**
** Function BTM_ReadDevInfo
**
** Description This function is called to read the device/address type
** of BD address.
**
** Parameter remote_bda: remote device address
** p_dev_type: output parameter to read the device type.
** p_addr_type: output parameter to read the address type.
**
*******************************************************************************/
//extern
void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type,
tBLE_ADDR_TYPE *p_addr_type);
/*******************************************************************************
**
** Function BTM_ReadConnectedTransportAddress
**
** Description This function is called to read the paired device/address type of other device paired
** corresponding to the BD_address
**
** Parameter remote_bda: remote device address, carry out the transport address
** transport: active transport
**
** Return TRUE if an active link is identified; FALSE otherwise
**
*******************************************************************************/
//extern
BOOLEAN BTM_ReadConnectedTransportAddress(BD_ADDR remote_bda,
tBT_TRANSPORT transport);
/*******************************************************************************
**
** Function BTM_BleBroadcast
**
** Description This function is to start or stop broadcasting.
**
** Parameters start: start or stop broadcasting.
**
** Returns status.
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleBroadcast(BOOLEAN start);
/*******************************************************************************
**
** Function BTM_BleConfigPrivacy
**
** Description This function is called to enable or disable the privacy in
** the local device.
**
** Parameters enable: TRUE to enable it; FALSE to disable it.
**
** Returns BOOLEAN privacy mode set success; otherwise failed.
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleConfigPrivacy(BOOLEAN enable);
/*******************************************************************************
**
** Function BTM_BleLocalPrivacyEnabled
**
** Description Checks if local device supports private address
**
** Returns Return TRUE if local privacy is enabled else FALSE
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleLocalPrivacyEnabled(void);
/*******************************************************************************
**
** Function BTM_BleEnableMixedPrivacyMode
**
** Description This function is called to enabled Mixed mode if privacy 1.2
** is applicable in controller.
**
** Parameters mixed_on: mixed mode to be used or not.
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleEnableMixedPrivacyMode(BOOLEAN mixed_on);
/*******************************************************************************
**
** Function BTM_BleMaxMultiAdvInstanceCount
**
** Description Returns max number of multi adv instances supported by controller
**
** Returns Max multi adv instance count
**
*******************************************************************************/
//extern
UINT8 BTM_BleMaxMultiAdvInstanceCount();
/*******************************************************************************
**
** Function BTM_BleSetConnectableMode
**
** Description This function is called to set BLE connectable mode for a
** peripheral device.
**
** Parameters connectable_mode: directed connectable mode, or non-directed.It can
** be BTM_BLE_CONNECT_EVT, BTM_BLE_CONNECT_DIR_EVT or
** BTM_BLE_CONNECT_LO_DUTY_DIR_EVT
**
** Returns BTM_ILLEGAL_VALUE if controller does not support BLE.
** BTM_SUCCESS is status set successfully; otherwise failure.
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleSetConnectableMode(tBTM_BLE_CONN_MODE connectable_mode);
/*******************************************************************************
**
** Function BTM_BleTurnOnPrivacyOnRemote
**
** Description This function is called to enable or disable the privacy on the
** remote device.
**
** Parameters bd_addr: remote device address.
** privacy_on: TRUE to enable it; FALSE to disable it.
**
** Returns void
**
*******************************************************************************/
//extern
void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr,
BOOLEAN privacy_on);
/*******************************************************************************
**
** Function BTM_BleUpdateAdvWhitelist
**
** Description Add or remove device from advertising white list
**
** Returns void
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR emote_bda);
/*******************************************************************************
**
** Function BTM_BleUpdateAdvFilterPolicy
**
** Description This function update the filter policy of advertiser.
**
** Parameter adv_policy: advertising filter policy
**
** Return void
*******************************************************************************/
//extern
void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy);
/*******************************************************************************
**
** Function BTM_BleReceiverTest
**
** Description This function is called to start the LE Receiver test
**
** Parameter rx_freq - Frequency Range
** p_cmd_cmpl_cback - Command Complete callback
**
*******************************************************************************/
void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback);
/*******************************************************************************
**
** Function BTM_BleTransmitterTest
**
** Description This function is called to start the LE Transmitter test
**
** Parameter tx_freq - Frequency Range
** test_data_len - Length in bytes of payload data in each packet
** packet_payload - Pattern to use in the payload
** p_cmd_cmpl_cback - Command Complete callback
**
*******************************************************************************/
void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len,
UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback);
/*******************************************************************************
**
** Function BTM_BleTestEnd
**
** Description This function is called to stop the in-progress TX or RX test
**
** Parameter p_cmd_cmpl_cback - Command complete callback
**
*******************************************************************************/
void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback);
/*******************************************************************************
**
** Function BTM_UseLeLink
**
** Description This function is to select the underneath physical link to use.
**
** Returns TRUE to use LE, FALSE use BR/EDR.
**
*******************************************************************************/
//extern
BOOLEAN BTM_UseLeLink (BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTM_BleStackEnable
**
** Description Enable/Disable BLE functionality on stack regarless controller
** capability.
**
** Parameters: enable: TRUE to enable, FALSE to disable.
**
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleStackEnable (BOOLEAN enable);
/*******************************************************************************
**
** Function BTM_GetLeSecurityState
**
** Description This function is called to get security mode 1 flags and
** encryption key size for LE peer.
**
** Returns BOOLEAN TRUE if LE device is found, FALSE otherwise.
**
*******************************************************************************/
//extern
BOOLEAN BTM_GetLeSecurityState (BD_ADDR bd_addr,
UINT8 *p_le_dev_sec_flags,
UINT8 *p_le_key_size);
/*******************************************************************************
**
** Function BTM_BleSecurityProcedureIsRunning
**
** Description This function indicates if LE security procedure is
** currently running with the peer.
**
** Returns BOOLEAN TRUE if security procedure is running, FALSE otherwise.
**
*******************************************************************************/
//extern
BOOLEAN BTM_BleSecurityProcedureIsRunning (BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTM_BleGetSupportedKeySize
**
** Description This function gets the maximum encryption key size in bytes
** the local device can suport.
** record.
**
** Returns the key size or 0 if the size can't be retrieved.
**
*******************************************************************************/
//extern
UINT8 BTM_BleGetSupportedKeySize (BD_ADDR bd_addr);
/*******************************************************************************/
/* Multi ADV API */
/*******************************************************************************
**
** Function BTM_BleEnableAdvInstance
**
** Description This function enable a Multi-ADV instance with the specified
** adv parameters
**
** Parameters p_params: pointer to the adv parameter structure, set as default
** adv parameter when the instance is enabled.
** p_cback: callback function for the adv instance.
** p_ref: reference data attach to the adv instance to be enabled.
**
** Returns status
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleEnableAdvInstance (tBTM_BLE_ADV_PARAMS *p_params,
tBTM_BLE_MULTI_ADV_CBACK *p_cback,
void *p_ref);
/*******************************************************************************
**
** Function BTM_BleUpdateAdvInstParam
**
** Description This function update a Multi-ADV instance with the specififed
** adv parameters.
**
** Parameters inst_id: adv instance ID
** p_params: pointer to the adv parameter structure.
**
** Returns status
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleUpdateAdvInstParam (UINT8 inst_id, tBTM_BLE_ADV_PARAMS *p_params);
/*******************************************************************************
**
** Function BTM_BleCfgAdvInstData
**
** Description This function configure a Multi-ADV instance with the specified
** adv data or scan response data.
**
** Parameters inst_id: adv instance ID
** is_scan_rsp: is this scacn response, if no set as adv data.
** data_mask: adv data mask.
** p_data: pointer to the adv data structure.
**
** Returns status
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp,
tBTM_BLE_AD_MASK data_mask,
tBTM_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTM_BleDisableAdvInstance
**
** Description This function disable a Multi-ADV instance.
**
** Parameters inst_id: adv instance ID
**
** Returns status
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleDisableAdvInstance (UINT8 inst_id);
/*******************************************************************************
**
** Function BTM_BleAdvFilterParamSetup
**
** Description This function is called to setup the adv data payload filter
** condition.
**
** Parameters p_target: enabble the filter condition on a target device; if NULL
** enable the generic scan condition.
** enable: enable or disable the filter condition
**
** Returns void
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleAdvFilterParamSetup(int action,
tBTM_BLE_PF_FILT_INDEX filt_index,
tBTM_BLE_PF_FILT_PARAMS *p_filt_params,
tBLE_BD_ADDR *p_target, tBTM_BLE_PF_PARAM_CBACK *p_cmpl_cback,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleCfgFilterCondition
**
** Description This function is called to configure the adv data payload filter
** condition.
**
** Parameters action: to read/write/clear
** cond_type: filter condition type.
** p_cond: filter condition paramter
**
** Returns tBTM_STATUS
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleCfgFilterCondition(tBTM_BLE_SCAN_COND_OP action,
tBTM_BLE_PF_COND_TYPE cond_type,
tBTM_BLE_PF_FILT_INDEX filt_index,
tBTM_BLE_PF_COND_PARAM *p_cond,
tBTM_BLE_PF_CFG_CBACK *p_cmpl_cback,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleEnableDisableFilterFeature
**
** Description This function is called to enable or disable the APCF feature
**
** Parameters enable - TRUE - enables the APCF, FALSE - disables the APCF
** ref_value - Ref value
**
** Returns tBTM_STATUS
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleEnableDisableFilterFeature(UINT8 enable,
tBTM_BLE_PF_STATUS_CBACK *p_stat_cback,
tBTM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTM_BleGetEnergyInfo
**
** Description This function obtains the energy info
**
** Parameters p_ener_cback - Callback pointer
**
** Returns status
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_BleGetEnergyInfo(tBTM_BLE_ENERGY_INFO_CBACK *p_ener_cback);
/*******************************************************************************
**
** Function BTM_SetBleDataLength
**
** Description This function is called to set maximum BLE transmission packet size
**
** Returns BTM_SUCCESS if success; otherwise failed.
**
*******************************************************************************/
//extern
tBTM_STATUS BTM_SetBleDataLength(BD_ADDR bd_addr, UINT16 tx_pdu_length);
/*
#ifdef __cplusplus
}
#endif
*/
#endif