esp-idf/docs/get-started/macos-setup.rst
Ivan Grokhotkov 0f503dee50 toolchain: update to 1.22.0-75-gbaf03c2
- enable condition variable support in gthread
- add provisions to allow emergency exception pool size to be configured
2017-11-21 19:30:52 +08:00

58 lines
1.6 KiB
ReStructuredText

**************************************
Standard Setup of Toolchain for Mac OS
**************************************
Install Prerequisites
=====================
- install pip::
sudo easy_install pip
- install pyserial::
sudo pip install pyserial
Toolchain Setup
===============
ESP32 toolchain for macOS is available for download from Espressif website:
https://dl.espressif.com/dl/xtensa-esp32-elf-osx-1.22.0-75-gbaf03c2-5.2.0.tar.gz
Download this file, then extract it in ``~/esp`` directory::
mkdir -p ~/esp
cd ~/esp
tar -xzf ~/Downloads/xtensa-esp32-elf-osx-1.22.0-75-gbaf03c2-5.2.0.tar.gz
.. _setup-macos-toolchain-add-it-to-path:
The toolchain will be extracted into ``~/esp/xtensa-esp32-elf/`` directory.
To use it, you will need to update your ``PATH`` environment variable in ``~/.profile`` file. To make ``xtensa-esp32-elf`` available for all terminal sessions, add the following line to your ``~/.profile`` file::
export PATH=$PATH:$HOME/esp/xtensa-esp32-elf/bin
Alternatively, you may create an alias for the above command. This way you can get the toolchain only when you need it. To do this, add different line to your ``~/.profile`` file::
alias get_esp32="export PATH=$PATH:$HOME/esp/xtensa-esp32-elf/bin"
Then when you need the toolchain you can type ``get_esp32`` on the command line and the toolchain will be added to your ``PATH``.
Next Steps
==========
To carry on with development environment setup, proceed to section :ref:`get-started-get-esp-idf`.
Related Documents
=================
.. toctree::
:maxdepth: 1
macos-setup-scratch