esp-idf/components/esp32/phy_init_data.h
Tian Hao 09862b5918 component/esp32 : update phy & rtc
RTC V230
add BT AGC saturation protection, replace RTC V229.

PHY V362
Power up print: "phy_version: 362.0, 61e8d92, Sep 8 2017, 18:48:13"
1. esp_init_data_v3.bin
modify TX target power
modify WIFI & BT RX gain table
2. modify phy_close_rf()
3. add phy_set_most_tpw()
4. 26M crystal work OK
5. noise_check_loop ok
2017-10-17 18:02:42 +08:00

141 lines
2.6 KiB
C

// Copyright 2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "esp_phy_init.h"
#include "sdkconfig.h"
// constrain a value between 'low' and 'high', inclusive
#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val)
#define PHY_INIT_MAGIC "PHYINIT"
static const char phy_init_magic_pre[] = PHY_INIT_MAGIC;
/**
* @brief Structure containing default recommended PHY initialization parameters.
*/
static const esp_phy_init_data_t phy_init_data= { {
3,
3,
0x05,
0x09,
0x06,
0x05,
0x03,
0x06,
0x05,
0x04,
0x06,
0x04,
0x05,
0x00,
0x00,
0x00,
0x00,
0x05,
0x09,
0x06,
0x05,
0x03,
0x06,
0x05,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0x00,
0xfc,
0xfc,
0xfe,
0xf0,
0xf0,
0xf0,
0xe0,
0xe0,
0xe0,
0x18,
0x18,
0x18,
LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 78),
LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 72),
LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 66),
LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 60),
LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 56),
LIMIT(CONFIG_ESP32_PHY_MAX_TX_POWER * 4, 0, 52),
0,
1,
1,
2,
2,
3,
4,
5,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
} };
static const char phy_init_magic_post[] = PHY_INIT_MAGIC;