esp-idf/components/esp32/include/esp_spiram.h
morris b6d7675e60 ethernet: fix some bugs in phy&mac driver
1. Original register mapping for LAN8720 has some registers that doesn't exist/support.
So just remove them, and fix the power and init function for LAN8720.
2. GPIO16 and GPIO17 is occupied by PSRAM, so only ETH_CLOCK_GPIO_IN mode is supported in that case if using PSRAM.
3. Fix bug of OTA failing with Ethernet
4. Fix bug of multicast with Ethernet

Closes https://github.com/espressif/esp-idf/issues/2564
Closes https://github.com/espressif/esp-idf/issues/2620
Closes https://github.com/espressif/esp-idf/issues/2657
2018-11-06 11:07:22 +08:00

116 lines
3.2 KiB
C

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_SPIRAM_H
#define __ESP_SPIRAM_H
#include <stddef.h>
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
typedef enum {
ESP_SPIRAM_SIZE_32MBITS = 0, /*!< SPI RAM size is 32 MBits */
ESP_SPIRAM_SIZE_64MBITS = 1, /*!< SPI RAM size is 64 MBits */
ESP_SPIRAM_SIZE_INVALID, /*!< SPI RAM size is invalid */
} esp_spiram_size_t;
/**
* @brief get SPI RAM size
* @return
* - ESP_SPIRAM_SIZE_INVALID if SPI RAM not enabled or not valid
* - SPI RAM size
*/
esp_spiram_size_t esp_spiram_get_chip_size();
/**
* @brief Initialize spiram interface/hardware. Normally called from cpu_start.c.
*
* @return ESP_OK on success
*/
esp_err_t esp_spiram_init();
/**
* @brief Configure Cache/MMU for access to external SPI RAM.
*
* Normally this function is called from cpu_start, if CONFIG_SPIRAM_BOOT_INIT
* option is enabled. Applications which need to enable SPI RAM at run time
* can disable CONFIG_SPIRAM_BOOT_INIT, and call this function later.
*
* @attention this function must be called with flash cache disabled.
*/
void esp_spiram_init_cache();
/**
* @brief Memory test for SPI RAM. Should be called after SPI RAM is initialized and
* (in case of a dual-core system) the app CPU is online. This test overwrites the
* memory with crap, so do not call after e.g. the heap allocator has stored important
* stuff in SPI RAM.
*
* @return true on success, false on failed memory test
*/
bool esp_spiram_test();
/**
* @brief Add the initialized SPI RAM to the heap allocator.
*/
esp_err_t esp_spiram_add_to_heapalloc();
/**
* @brief Get the size of the attached SPI RAM chip selected in menuconfig
*
* @return Size in bytes, or 0 if no external RAM chip support compiled in.
*/
size_t esp_spiram_get_size();
/**
* @brief Force a writeback of the data in the SPI RAM cache. This is to be called whenever
* cache is disabled, because disabling cache on the ESP32 discards the data in the SPI
* RAM cache.
*
* This is meant for use from within the SPI flash code.
*/
void esp_spiram_writeback_cache();
/**
* @brief Reserve a pool of internal memory for specific DMA/internal allocations
*
* @param size Size of reserved pool in bytes
*
* @return
* - ESP_OK on success
* - ESP_ERR_NO_MEM when no memory available for pool
*/
esp_err_t esp_spiram_reserve_dma_pool(size_t size);
/**
* @brief If SPI RAM(PSRAM) has been initialized
*
* @return
* - true SPI RAM has been initialized successfully
* - false SPI RAM hasn't been initialized or initialized failed
*/
bool esp_spiram_is_initialized(void);
#endif