esp-idf/examples
Roman Leonov 0c9e30fa8e Merge branch 'feature/usb_host_hid_example' into 'master'
USB Host: Add HID example

Closes IDF-2213 and IDFGH-7795

Closes https://github.com/espressif/esp-idf/issues/9330

See merge request espressif/esp-idf!20902
2022-12-12 21:36:10 +08:00
..
bluetooth Merge branch 'bugfix/fix_ble_hid_output_report' into 'master' 2022-12-12 15:35:31 +08:00
build_system ci: Make consistence between pytest_*.py and .build-test-rules.yml for esp32c6 (i.e. to pass check_test_scripts_build_test_rules.py) 2022-11-28 11:58:30 +08:00
common_components Merge branch 'feature/add_iperf_format_change' into 'master' 2022-12-05 16:31:12 +08:00
custom_bootloader soc: Add a soc cap, SOC_CLK_RC_FAST_D256_SUPPORTED, for whether the target has the RC_FAST_D256 clock 2022-11-01 11:23:26 +08:00
cxx system: fix printf format errors in all system and cxx examples 2022-12-12 12:55:02 +08:00
ethernet Merge branch 'feature/enc28j60_not_new_design' into 'master' 2022-12-01 05:27:38 +08:00
get-started hello_world: revert to %d for 8/16-bit for newlib-nano compatibility 2022-12-06 14:59:34 +01:00
mesh ci: Enable esp32c6 example, test_apps, and unit tests CI build stage 2022-11-01 11:23:21 +08:00
network Merge branch 'feature/eth_bridge_test' into 'master' 2022-12-01 17:51:11 +08:00
openthread openthread: add service_discovery and NAT64 cases for openthread CI 2022-11-11 16:52:49 +08:00
peripherals Merge branch 'feature/usb_host_hid_example' into 'master' 2022-12-12 21:36:10 +08:00
protocols protocols/security: Remove -Wno-format compile option for examples 2022-12-07 13:02:00 +05:30
provisioning Wifi Prov: Disabled the default support for BLE Encrpytion on characteristics read /write 2022-11-25 11:26:10 +05:30
security protocols/security: Remove -Wno-format compile option for examples 2022-12-07 13:02:00 +05:30
storage ci: move more openocd scripts into pytest-embedded 2022-12-08 14:25:02 +08:00
system Merge branch 'bugfix/system_examples_print_format' into 'master' 2022-12-12 16:15:30 +08:00
wifi esp_wifi: upload more wifi pkt info in rx callback for espnow & csi 2022-12-05 22:30:08 +08:00
zigbee zigbee: update Zigbee example signal handler API 2022-11-21 15:39:57 +08:00
README.md docs: improve the installation instructions 2022-08-01 15:52:21 +08:00

Examples

This directory contains a range of example ESP-IDF projects. These examples are intended to demonstrate parts of the ESP-IDF functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into subdirectories by category. Each category directory contains one or more example projects:

  • bluetooth/bluedroid Classic BT, BLE and coex examples using default Bluedroid host stack.
  • bluetooth/nimble BLE examples using NimBLE host stack.
  • bluetooth/esp_ble_mesh ESP BLE Mesh examples.
  • bluetooth/hci HCI transport (VHCI and HCI UART) examples.
  • build_system Examples of build system features.
  • cxx C++ language utilization examples and experimental components.
  • ethernet Ethernet network examples.
  • get-started Simple examples with minimal functionality. Good start point for beginners.
  • mesh Wi-Fi Mesh examples.
  • network Examples related to general network environment, test & analysis.
  • openthread OpenThread examples.
  • peripherals Examples showing driver functionality for the various onboard ESP32 peripherals.
  • protocols Examples showing network protocol interactions.
  • provisioning Wi-Fi provisioning examples.
  • security Examples about security features.
  • storage Examples showing data storage methods using SPI flash, external storage like the SD/MMC interface and flash partitioning.
  • system Demonstrates some internal chip features, or debugging & development tools.
  • wifi Advanced Wi-Fi features (For network protocol examples, see protocols instead.)
  • Zigbee Zigbee network and device examples.

In addition to these examples, commmon_components directory contains code shared by several examples.

Using Examples

Before building an example, be sure to follow the ESP-IDF Getting Started Guide to ensure you have the required development environment.

Building an example is the same as building any other project:

  • Change into the directory of the new example you'd like to build.
  • Run idf.py set-target TARGET to select the correct chip target to build before opening the project configuration menu. By default the target is esp32. For all options see idf.py set-target --help
  • Run idf.py menuconfig to open the project configuration menu. Most examples have a project-specific "Example Configuration" section here (for example, to set the WiFi SSID & password to use).
  • idf.py build to build the example.
  • Follow the printed instructions to flash, or run idf.py -p PORT flash.

Running Test Python Script (ttfw)

Some of the examples have ..._test.py scripts that are used to test that the example works as expected. These scripts run automatically in the internal test queue. They are not intended to be run by ESP-IDF users but sometimes you may want to run them locally.

Install Python dependencies and export the Python path where the IDF CI Python modules are found with the following commands:

bash install.sh --enable-ttfw
source export.sh
export PYTHONPATH=$IDF_PATH/tools/ci/python_packages:$IDF_PATH/tools:$PYTHONPATH

Running Test Python Script (pytest)

Some of the examples have pytest_....py scripts that are using the pytest as the test framework. For detailed information, please refer to the "Run the Tests Locally" Section under ESP-IDF tests in Pytest documentation

Using pytest is the recommended way to write new tests. We will migrate all the example test scripts to this new framework soon.

Copying Examples

Each example is a standalone project. The examples do not have to be inside the esp-idf directory. You can copy an example directory to anywhere on your computer in order to make a copy that you can modify and work with.

The IDF_PATH environment variable is the only thing that connects the example to the rest of ESP-IDF.

If you're looking for a more bare-bones project to start from, try esp-idf-template.

Contributing Examples

If you have a new example you think we'd like, please consider sending it to us as a Pull Request.

In the ESP-IDF documentation, you can find a "Creating Examples" page which lays out the steps to creating a top quality example.