alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
5b39159e66
esp-idf/docs/en/hw-reference/esp32s3/user-guide-devkitc-1-v1.0.rst
mofeifei a664eb9e5a docs:update s3-devkitc-1 user guide v1.1
2022-07-08 07:57:29 +00:00

323 lines
12 KiB
ReStructuredText
Raw Blame History

===================
ESP32-S3-DevKitC-1
===================
:link_to_translation:`zh_CN:[中文]`
The latest version: :doc:`user-guide-devkitc-1`
This user guide will help you get started with ESP32-S3-DevKitC-1 and will also provide more in-depth information.
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, or ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.
Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC-1 on a breadboard.
.. figure:: ../../../_static/esp32-s3-devkitc-1-v1-isometric.png
:align: center
:alt: ESP32-S3-DevKitC-1 with ESP32-S3-WROOM-1 Module
ESP32-S3-DevKitC-1 with ESP32-S3-WROOM-1 Module
The document consists of the following major sections:
- `Getting started`_: Overview of the board and hardware/software setup instructions to get started.
- `Hardware Reference`_: More detailed information about the board's hardware.
- `Hardware Revision Details`_: Revision history, known issues, and links to user guides for previous versions (if any) of the board.
- `Related Documents`_: Links to related documentation.
Getting Started
===============
This section provides a brief introduction of ESP32-S3-DevKitC-1, instructions on how to do the initial hardware setup and how to flash firmware onto it.
Description of Components
-------------------------
.. _user-guide-s3-devkitc-1-v1-board-front:
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-annotated-photo.png
:align: center
:alt: ESP32-S3-DevKitC-1 - front
ESP32-S3-DevKitC-1 - front
The key components of the board are described in a counter-clockwise direction.
.. list-table::
:widths: 30 70
:header-rows: 1
* - Key Component
- Description
* - ESP32-S3-WROOM-1/1U/2
- ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, and ESP32-S3-WROOM-2 are powerful, generic Wi-Fi + Bluetooth LE MCU modules that have a rich set of peripherals. They provide acceleration for neural network computing and signal processing workloads. ESP32-S3-WROOM-1 and ESP32-S3-WROOM-2 comes with a PCB antenna. ESP32-S3-WROOM-1U comes with an external antenna connector.
* - 5 V to 3.3 V LDO
- Power regulator that converts a 5 V supply into a 3.3 V output.
* - Pin Headers
- All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing and programming. For details, please see :ref:`user-guide-s3-devkitc-1-v1-header-blocks`.
* - USB-to-UART Port
- A Micro-USB port used for power supply to the board, for flashing applications to the chip, as well as for communication with the chip via the on-board USB-to-UART bridge.
* - Boot Button
- Download button. Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
* - Reset Button
- Press this button to restart the system.
* - ESP32-S3 USB Port
- ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 specification. The interface is used for power supply to the board, for flashing applications to the chip, for communication with the chip using USB 1.1 protocols, as well as for JTAG debugging.
* - USB-to-UART Bridge
- Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
* - RGB LED
- Addressable RGB LED, driven by GPIO48.
* - 3.3 V Power On LED
- Turns on when the USB power is connected to the board.
.. note::
For boards with ESP32-S3-WROOM-2 modules, the pins GPIO35, GPIO36 and GPIO37 are used for the internal communication between ESP32-S3 and SPI flash/PSRAM memory, thus not availablt for external use.
Start Application Development
-----------------------------
Before powering up your board, please make sure that it is in good condition with no obvious signs of damage.
Required Hardware
^^^^^^^^^^^^^^^^^
- ESP32-S3-DevKitC-1
- USB 2.0 cable (Standard-A to Micro-B)
- Computer running Windows, Linux, or macOS
.. note::
Be sure to use an appropriate USB cable. Some cables are for charging only and do not provide the needed data lines nor work for programming the boards.
Hardware Setup
^^^^^^^^^^^^^^
Connect the board with the computer using **USB-to-UART Port**. Connection using **ESP32-S3 USB Port** is not fully implemented in software. In subsequent steps, **USB-to-UART Port** will be used by default.
Software Setup
^^^^^^^^^^^^^^
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your board.
Contents and Packaging
-----------------------
Ordering Information
^^^^^^^^^^^^^^^^^^^^^^^^
The development board has a variety of variants to choose from, as shown in the table below.
.. list-table::
:widths: 28 29 19 17 15
:header-rows: 1
* - Ordering Code
- Module Integrated
- Flash
- PSRAM
- SPI Voltage
* - ESP32-S3-DevKitC-1-N8
- ESP32-S3-WROOM-1-N8
- 8 MB QD
- —
- 3.3 V
* - ESP32-S3-DevKitC-1-N8R2
- ESP32-S3-WROOM-1-N8R2
- 8 MB QD
- 2 MB QD
- 3.3 V
* - ESP32-S3-DevKitC-1-N8R8
- ESP32-S3-WROOM-1-N8R8
- 8 MB QD
- 8 MB OT
- 3.3 V
* - ESP32-S3-DevKitC-1-N16R8V
- ESP32-S3-WROOM-2-N16R8V
- 16 MB OT
- 8 MB OT
- 1.8 V
* - ESP32-S3-DevKitC-1-N32R8V
- ESP32-S3-WROOM-2-N32R8V
- 32 MB OT
- 8 MB OT
- 1.8 V
* - ESP32-S3-DevKitC-1U-N8
- ESP32-S3-WROOM-1U-N8
- 8 MB QD
- —
- 3.3 V
* - ESP32-S3-DevKitC-1U-N8R2
- ESP32-S3-WROOM-1U-N8R2
- 8 MB QD
- 2 MB QD
- 3.3 V
* - ESP32-S3-DevKitC-1U-N8R8
- ESP32-S3-WROOM-1U-N8R8
- 8 MB QD
- 8 MB OT
- 3.3 V
.. note::
In the table above, QD stands for Quad SPI and OT stands for Octal SPI.
Retail Orders
^^^^^^^^^^^^^
If you order a few samples, each board comes in an individual package in either antistatic bag or any packaging depending on your retailer.
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
Wholesale Orders
^^^^^^^^^^^^^^^^^
If you order in bulk, the boards come in large cardboard boxes.
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
Hardware Reference
==================
Block Diagram
-------------
The block diagram below shows the components of ESP32-S3-DevKitC-1 and their interconnections.
.. figure:: ../../../_static/ESP32-S3-DevKitC-1_v2-SystemBlock.png
:align: center
:scale: 70%
:alt: ESP32-S3-DevKitC-1 (click to enlarge)
ESP32-S3-DevKitC-1 (click to enlarge)
Power Supply Options
^^^^^^^^^^^^^^^^^^^^^
There are three mutually exclusive ways to provide power to the board:
- USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
- 5V and G (GND) pins
- 3V3 and G (GND) pins
.. _user-guide-s3-devkitc-1-v1-header-blocks:
Header Block
-------------
The two tables below provide the **Name** and **Function** of the pins on both sides of the board (J1 and J3). The pin names are shown in :ref:`user-guide-s3-devkitc-1-v1-board-front`. The numbering is the same as in the `Board Schematic <https://dl.espressif.com/dl/SCH_ESP32-S3-DEVKITC-1_V1_20210312C.pdf>`_ (PDF).
J1
^^^
=== ==== ========== ===================================
No. Name Type [#]_ Function
=== ==== ========== ===================================
1 3V3 P 3.3 V power supply
2 3V3 P 3.3 V power supply
3 RST I EN
4 4 I/O/T RTC_GPIO4, GPIO4, TOUCH4, ADC1_CH3
5 5 I/O/T RTC_GPIO5, GPIO5, TOUCH5, ADC1_CH4
6 6 I/O/T RTC_GPIO6, GPIO6, TOUCH6, ADC1_CH5
7 7 I/O/T RTC_GPIO7, GPIO7, TOUCH7, ADC1_CH6
8 15 I/O/T RTC_GPIO15, GPIO15, U0RTS, ADC2_CH4, XTAL_32K_P
9 16 I/O/T RTC_GPIO16, GPIO16, U0CTS, ADC2_CH5, XTAL_32K_N
10 17 I/O/T RTC_GPIO17, GPIO17, U1TXD, ADC2_CH6
11 18 I/O/T RTC_GPIO18, GPIO18, U1RXD, ADC2_CH7, CLK_OUT3
12 8 I/O/T RTC_GPIO8, GPIO8, TOUCH8, ADC1_CH7, SUBSPICS1
13 3 I/O/T RTC_GPIO3, GPIO3, TOUCH3, ADC1_CH2
14 46 I/O/T GPIO46
15 9 I/O/T RTC_GPIO9, GPIO9, TOUCH9, ADC1_CH8, FSPIHD, SUBSPIHD
16 10 I/O/T RTC_GPIO10, GPIO10, TOUCH10, ADC1_CH9, FSPICS0, FSPIIO4, SUBSPICS0
17 11 I/O/T RTC_GPIO11, GPIO11, TOUCH11, ADC2_CH0, FSPID, FSPIIO5, SUBSPID
18 12 I/O/T RTC_GPIO12, GPIO12, TOUCH12, ADC2_CH1, FSPICLK, FSPIIO6, SUBSPICLK
19 13 I/O/T RTC_GPIO13, GPIO13, TOUCH13, ADC2_CH2, FSPIQ, FSPIIO7, SUBSPIQ
20 14 I/O/T RTC_GPIO14, GPIO14, TOUCH14, ADC2_CH3, FSPIWP, FSPIDQS, SUBSPIWP
21 5V P 5 V power supply
22 G G Ground
=== ==== ========== ===================================
J3
^^^
=== ==== ===== ====================================
No. Name Type Function
=== ==== ===== ====================================
1 G G Ground
2 TX I/O/T U0TXD, GPIO43, CLK_OUT1
3 RX I/O/T U0RXD, GPIO44, CLK_OUT2
4 1 I/O/T RTC_GPIO1, GPIO1, TOUCH1, ADC1_CH0
5 2 I/O/T RTC_GPIO2, GPIO2, TOUCH2, ADC1_CH1
6 42 I/O/T MTMS, GPIO42
7 41 I/O/T MTDI, GPIO41, CLK_OUT1
8 40 I/O/T MTDO, GPIO40, CLK_OUT2
9 39 I/O/T MTCK, GPIO39, CLK_OUT3, SUBSPICS1
10 38 I/O/T GPIO38, FSPIWP, SUBSPIWP
11 37 I/O/T SPIDQS, GPIO37, FSPIQ, SUBSPIQ
12 36 I/O/T SPIIO7, GPIO36, FSPICLK, SUBSPICLK
13 35 I/O/T SPIIO6, GPIO35, FSPID, SUBSPID
14 0 I/O/T RTC_GPIO0, GPIO0
15 45 I/O/T GPIO45
16 48 I/O/T GPIO48, SPICLK_N, SUBSPICLK_N_DIFF, RGB LED
17 47 I/O/T GPIO47, SPICLK_P, SUBSPICLK_P_DIFF
18 21 I/O/T RTC_GPIO21, GPIO21
19 20 I/O/T RTC_GPIO20, GPIO20, U1CTS, ADC2_CH9, CLK_OUT1, USB_D+
20 19 I/O/T RTC_GPIO19, GPIO19, U1RTS, ADC2_CH8, CLK_OUT2, USB_D-
21 G G Ground
22 G G Ground
=== ==== ===== ====================================
.. [#] P: Power supply; I: Input; O: Output; T: High impedance.
For description of function names, please refer to `Chip Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF).
Pin Layout
^^^^^^^^^^^
.. figure:: ../../../_static/ESP32-S3_DevKitC-1_pinlayout.jpg
:align: center
:scale: 50%
:alt: ESP32-S3-DevKitC-1 (click to enlarge)
ESP32-S3-DevKitC-1 Pin Layout (click to enlarge)
Hardware Revision Details
=========================
This is the first revision of this board released.
Related Documents
=================
- `ESP32-S3 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf>`_ (PDF)
- `ESP32-S3-WROOM-1 & ESP32-S3-WROOM-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf>`_ (PDF)
- `ESP32-S3-WROOM-2 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-2_datasheet_en.pdf>`_ (PDF)
- `ESP32-S3-DevKitC-1 Schematic <https://dl.espressif.com/dl/SCH_ESP32-S3-DEVKITC-1_V1_20210312C.pdf>`_ (PDF)
- `ESP32-S3-DevKitC-1 PCB layout <https://dl.espressif.com/dl/PCB_ESP32-S3-DevKitC-1_V1_20210312CB.pdf>`_ (PDF)
- `ESP32-S3-DevKitC-1 Dimensions <https://dl.espressif.com/dl/DXF_ESP32-S3-DevKitC-1_V1_20210312CB.pdf>`_ (PDF)
- `ESP32-S3-DevKitC-1 Dimensions source file <https://dl.espressif.com/dl/DXF_ESP32-S3-DevKitC-1_V1_20210312CB.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
For further design documentation for the board, please contact us at `sales@espressif.com <sales@espressif.com>`_.
Reference in New Issue View Git Blame Copy Permalink