mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
91 lines
5.0 KiB
ReStructuredText
91 lines
5.0 KiB
ReStructuredText
High-Level Interrupts
|
|
=====================
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
|
|
The Xtensa architecture has support for 32 interrupts, divided over 7 levels (levels 1 to 7, with 7 being an NMI), plus an assortment of exceptions. On the {IDF_TARGET_NAME}, the interrupt mux allows most interrupt sources to be routed to these interrupts using the :doc:`interrupt allocator <../api-reference/system/intr_alloc>`. Normally, interrupts will be written in C, but ESP-IDF allows high-level interrupts to be written in assembly as well, resulting in very low interrupt latencies.
|
|
|
|
Interrupt Levels
|
|
----------------
|
|
|
|
.. only:: esp32
|
|
|
|
===== ================= ====================================================
|
|
Level Symbol Remark
|
|
===== ================= ====================================================
|
|
1 N/A Exception and level 0 interrupts. Handled by ESP-IDF
|
|
2-3 N/A Medium level interrupts. Handled by ESP-IDF
|
|
4 xt_highint4 Free to use :ref:`(See 1) <hlinterrupts-pin-notes>`
|
|
5 xt_highint5 Normally used by ESP-IDF debug logic :ref:`(See 1) <hlinterrupts-pin-notes>`
|
|
NMI xt_nmi Free to use
|
|
dbg xt_debugexception Debug exception. Called on e.g. a BREAK instruction. :ref:`(See 2) <hlinterrupts-pin-notes>`
|
|
===== ================= ====================================================
|
|
|
|
|
|
.. _hlinterrupts-pin-notes:
|
|
|
|
The following notes give more information about the items in the tables above.
|
|
|
|
1. ESP-IDF debug logic can be configured to run on `xt_highint4` or `xt_highint5` in :ref:`CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL`. Bluetooth's interrupt can be configured to run on level 4 by enabling :ref:`CONFIG_BTDM_CTRL_HLI`. If :ref:`CONFIG_BTDM_CTRL_HLI` is enabled, ESP-IDF debug logic must be running on level 5 interrupt.
|
|
2. If :ref:`CONFIG_BTDM_CTRL_HLI` is enabled, `xt_debugexception` is used to fix `live lock issue <https://www.espressif.com/sites/default/files/documentation/eco_and_workarounds_for_bugs_in_esp32_en.pdf>`_ in ESP32 ECO3.
|
|
|
|
.. only:: not esp32
|
|
|
|
===== ================= ====================================================
|
|
Level Symbol Remark
|
|
===== ================= ====================================================
|
|
1 N/A Exception and level 0 interrupts. Handled by ESP-IDF
|
|
2-3 N/A Medium level interrupts. Handled by ESP-IDF
|
|
4 xt_highint4 Normally used by ESP-IDF debug logic
|
|
5 xt_highint5 Free to use
|
|
NMI xt_nmi Free to use
|
|
dbg xt_debugexception Debug exception. Called on e.g. a BREAK instruction.
|
|
===== ================= ====================================================
|
|
|
|
Using these symbols is done by creating an assembly file (suffix .S) and defining the named symbols, like this::
|
|
|
|
.section .iram1,"ax"
|
|
.global xt_highint5
|
|
.type xt_highint5,@function
|
|
.align 4
|
|
xt_highint5:
|
|
... your code here
|
|
rsr a0, EXCSAVE_5
|
|
rfi 5
|
|
|
|
For a real-life example, see the :component_file:`esp_system/port/soc/{IDF_TARGET_PATH_NAME}/highint_hdl.S` file; the panic handler interrupt is implemented there.
|
|
|
|
|
|
Notes
|
|
-----
|
|
|
|
- Do not call C code from a high-level interrupt; as these interrupts are run from a critical section, this can cause the target to crash.
|
|
Note that although the panic handler interrupt does call normal C code, this exception is allowed due to the fact that this handler never returns (i.e., the application will not continue to run after the panic handler).
|
|
so breaking C code execution flow is not a problem.
|
|
|
|
.. only:: esp32
|
|
|
|
When :ref:`CONFIG_BTDM_CTRL_HLI` is enabled, C code is also called from a high-level interrupt, this is possible thanks to some additional protection added to it.
|
|
|
|
- Make sure your assembly code gets linked in. Indeed, as the free-to-use symbols are declared as weak, the linker may discard the file containing the symbol. This will
|
|
happen if the only symbol defined, or used, from the user file is the ``xt_*`` free-to-use symbol. To avoid this, in the assembly file containing the ``xt_*`` symbol,
|
|
define another symbol, like::
|
|
|
|
.global ld_include_my_isr_file
|
|
ld_include_my_isr_file:
|
|
|
|
Here it is called ``ld_include_my_isr_file`` but can have any name, as long as it is not defined anywhere else in the project.
|
|
|
|
Then, in the component ``CMakeLists.txt``, add this name as an unresolved symbol to the ld command line arguments::
|
|
|
|
target_link_libraries(${COMPONENT_TARGET} "-u ld_include_my_isr_file")
|
|
|
|
This should cause the linker to always include the file defining ``ld_include_my_isr_file``, causing the ISR to always be linked in.
|
|
|
|
- High-level interrupts can be routed and handled using :cpp:func:`esp_intr_alloc` and associated functions. The handler and handler arguments
|
|
to :cpp:func:`esp_intr_alloc` must be NULL, however.
|
|
|
|
- In theory, medium priority interrupts could also be handled in this way. ESP-IDF does not support this yet.
|
|
|