esp-idf/components/soc/esp32h2/spi_periph.c
wanlei 96aa2792f8 spi_master:fix error when use spi_bus_add_device more than 3 device
update gpio_sig at `spics_out` array in each spi_periph.c of chips later than s2
then `spi_bus_add_device` can correctly distribute gpio_signals for cs_signal

Closes https://github.com/espressif/esp-idf/issues/8876
2022-09-05 12:10:22 +08:00

64 lines
2.3 KiB
C

/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/spi_periph.h"
#include "stddef.h"
/*
Bunch of constants for every SPI peripheral: GPIO signals, irqs, hw addr of registers etc
*/
const spi_signal_conn_t spi_periph_signal[SOC_SPI_PERIPH_NUM] = {
{
.spiclk_out = SPICLK_OUT_MUX_IDX,
.spiclk_in = 0,/* SPI clock is not an input signal*/
.spid_out = SPID_OUT_IDX,
.spiq_out = SPIQ_OUT_IDX,
.spiwp_out = SPIWP_OUT_IDX,
.spihd_out = SPIHD_OUT_IDX,
.spid_in = SPID_IN_IDX,
.spiq_in = SPIQ_IN_IDX,
.spiwp_in = SPIWP_IN_IDX,
.spihd_in = SPIHD_IN_IDX,
.spics_out = {SPICS0_OUT_IDX, SPICS1_OUT_IDX},/* SPI0/1 do not have CS2 now */
.spics_in = 0,/* SPI cs is not an input signal*/
.spiclk_iomux_pin = SPI_IOMUX_PIN_NUM_CLK,
.spid_iomux_pin = SPI_IOMUX_PIN_NUM_MOSI,
.spiq_iomux_pin = SPI_IOMUX_PIN_NUM_MISO,
.spiwp_iomux_pin = SPI_IOMUX_PIN_NUM_WP,
.spihd_iomux_pin = SPI_IOMUX_PIN_NUM_HD,
.spics0_iomux_pin = SPI_IOMUX_PIN_NUM_CS,
.irq = ETS_SPI1_INTR_SOURCE,
.irq_dma = -1,
.module = PERIPH_SPI_MODULE,
.hw = (spi_dev_t *) &SPIMEM1,
.func = SPI_FUNC_NUM,
}, {
.spiclk_out = FSPICLK_OUT_IDX,
.spiclk_in = FSPICLK_IN_IDX,
.spid_out = FSPID_OUT_IDX,
.spiq_out = FSPIQ_OUT_IDX,
.spiwp_out = FSPIWP_OUT_IDX,
.spihd_out = FSPIHD_OUT_IDX,
.spid_in = FSPID_IN_IDX,
.spiq_in = FSPIQ_IN_IDX,
.spiwp_in = FSPIWP_IN_IDX,
.spihd_in = FSPIHD_IN_IDX,
.spics_out = {FSPICS0_OUT_IDX, FSPICS1_OUT_IDX, FSPICS2_OUT_IDX, FSPICS3_OUT_IDX, FSPICS4_OUT_IDX, FSPICS5_OUT_IDX},
.spics_in = FSPICS0_IN_IDX,
.spiclk_iomux_pin = SPI2_IOMUX_PIN_NUM_CLK,
.spid_iomux_pin = SPI2_IOMUX_PIN_NUM_MOSI,
.spiq_iomux_pin = SPI2_IOMUX_PIN_NUM_MISO,
.spiwp_iomux_pin = SPI2_IOMUX_PIN_NUM_WP,
.spihd_iomux_pin = SPI2_IOMUX_PIN_NUM_HD,
.spics0_iomux_pin = SPI2_IOMUX_PIN_NUM_CS,
.irq = ETS_SPI2_INTR_SOURCE,
.irq_dma = -1,
.module = PERIPH_SPI2_MODULE,
.hw = &GPSPI2,
.func = SPI2_FUNC_NUM,
}
};