esp-idf/components/driver/test/test_i2s.c
2021-12-29 10:13:13 +08:00

738 lines
26 KiB
C

/*
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Unlicense OR CC0-1.0
*/
/**
* I2S test environment UT_T1_I2S:
* We use internal signals instead of external wiring, but please keep the following IO connections, or connect nothing to prevent the signal from being disturbed.
* connect GPIO15 and GPIO19, GPIO25(ESP32)/GPIO17(ESP32-S2) and GPIO26, GPIO21 and GPIO22(ESP32)/GPIO20(ESP32-S2)
* Please do not connect GPIO32(ESP32) any pull-up resistors externally, it will be used to test i2s adc function.
*/
#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "driver/gpio.h"
#include "hal/gpio_hal.h"
#include "unity.h"
#include "math.h"
#include "esp_rom_gpio.h"
#if SOC_I2S_SUPPORTED
#include "driver/i2s.h"
#define SAMPLE_RATE (36000)
#define SAMPLE_BITS (16)
#if CONFIG_IDF_TARGET_ESP32
#define MASTER_BCK_IO 15
#define MASTER_WS_IO 25
#define SLAVE_BCK_IO 19
#define SLAVE_WS_IO 26
#define DATA_IN_IO 21
#define DATA_OUT_IO 22
#define ADC1_CHANNEL_4_IO 32
#define I2S0_DATA_OUT_IDX I2S0O_DATA_OUT23_IDX
#define I2S0_DATA_IN_IDX I2S0I_DATA_IN15_IDX
#define I2S1_DATA_OUT_IDX I2S1O_DATA_OUT23_IDX
#define I2S1_DATA_IN_IDX I2S1I_DATA_IN15_IDX
#elif CONFIG_IDF_TARGET_ESP32S2
#define MASTER_BCK_IO 15
#define MASTER_WS_IO 28
#define SLAVE_BCK_IO 19
#define SLAVE_WS_IO 26
#define DATA_IN_IO 21
#define DATA_OUT_IO 20
#define I2S0_DATA_OUT_IDX I2S0O_DATA_OUT23_IDX
#define I2S0_DATA_IN_IDX I2S0I_DATA_IN15_IDX
#elif CONFIG_IDF_TARGET_ESP32C3
// TODO: change pins
#define MASTER_BCK_IO 4
#define MASTER_WS_IO 5
#define SLAVE_BCK_IO 14
#define SLAVE_WS_IO 15
#define DATA_IN_IO 19
#define DATA_OUT_IO 18
#define I2S0_DATA_OUT_IDX I2SO_SD_OUT_IDX
#define I2S0_DATA_IN_IDX I2SI_SD_IN_IDX
#elif CONFIG_IDF_TARGET_ESP32S3
#define MASTER_BCK_IO 4
#define MASTER_WS_IO 5
#define SLAVE_BCK_IO 14
#define SLAVE_WS_IO 15
#define DATA_IN_IO 19
#define DATA_OUT_IO 18
#define I2S0_DATA_OUT_IDX I2S0O_SD_OUT_IDX
#define I2S0_DATA_IN_IDX I2S0I_SD_IN_IDX
#define I2S1_DATA_OUT_IDX I2S1O_SD_OUT_IDX
#define I2S1_DATA_IN_IDX I2S1I_SD_IN_IDX
#endif
#define PERCENT_DIFF 0.0001
#define I2S_TEST_MODE_SLAVE_TO_MAXTER 0
#define I2S_TEST_MODE_MASTER_TO_SLAVE 1
#define I2S_TEST_MODE_LOOPBACK 2
// mode: 0, master rx, slave tx. mode: 1, master tx, slave rx. mode: 2, master tx rx loopback
// Since ESP32-S2 has only one I2S, only loop back test can be tested.
static void i2s_test_io_config(int mode)
{
// Connect internal signals using IO matrix.
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[MASTER_BCK_IO], PIN_FUNC_GPIO);
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[MASTER_WS_IO], PIN_FUNC_GPIO);
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[DATA_OUT_IO], PIN_FUNC_GPIO);
gpio_set_direction(MASTER_BCK_IO, GPIO_MODE_INPUT_OUTPUT);
gpio_set_direction(MASTER_WS_IO, GPIO_MODE_INPUT_OUTPUT);
gpio_set_direction(DATA_OUT_IO, GPIO_MODE_INPUT_OUTPUT);
switch (mode) {
#if SOC_I2S_NUM > 1
case I2S_TEST_MODE_SLAVE_TO_MAXTER: {
esp_rom_gpio_connect_out_signal(MASTER_BCK_IO, I2S0I_BCK_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(MASTER_BCK_IO, I2S1O_BCK_IN_IDX, 0);
esp_rom_gpio_connect_out_signal(MASTER_WS_IO, I2S0I_WS_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(MASTER_WS_IO, I2S1O_WS_IN_IDX, 0);
esp_rom_gpio_connect_out_signal(DATA_OUT_IO, I2S1_DATA_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(DATA_OUT_IO, I2S0_DATA_IN_IDX, 0);
}
break;
case I2S_TEST_MODE_MASTER_TO_SLAVE: {
esp_rom_gpio_connect_out_signal(MASTER_BCK_IO, I2S0O_BCK_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(MASTER_BCK_IO, I2S1I_BCK_IN_IDX, 0);
esp_rom_gpio_connect_out_signal(MASTER_WS_IO, I2S0O_WS_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(MASTER_WS_IO, I2S1I_WS_IN_IDX, 0);
esp_rom_gpio_connect_out_signal(DATA_OUT_IO, I2S0_DATA_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(DATA_OUT_IO, I2S1_DATA_IN_IDX, 0);
}
break;
#endif
case I2S_TEST_MODE_LOOPBACK: {
esp_rom_gpio_connect_out_signal(DATA_OUT_IO, I2S0_DATA_OUT_IDX, 0, 0);
esp_rom_gpio_connect_in_signal(DATA_OUT_IO, I2S0_DATA_IN_IDX, 0);
}
break;
default: {
TEST_FAIL_MESSAGE("error: mode not supported");
}
break;
}
}
/**
* i2s initialize test
* 1. i2s_driver_install
* 2. i2s_set_pin
*/
TEST_CASE("I2S basic driver install, uninstall, set pin test", "[i2s]")
{
// dac, adc i2s
i2s_config_t i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 60,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
// normal i2s
i2s_pin_config_t pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = DATA_OUT_IO,
.data_in_num = -1
};
QueueHandle_t evt_que;
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 16, &evt_que));
TEST_ASSERT(evt_que);
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &pin_config));
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
//error param test
TEST_ASSERT(i2s_driver_install(I2S_NUM_MAX, &i2s_config, 0, NULL) == ESP_ERR_INVALID_ARG);
TEST_ASSERT(i2s_driver_install(I2S_NUM_0, NULL, 0, NULL) == ESP_ERR_INVALID_ARG);
i2s_config.dma_desc_num = 1;
TEST_ASSERT(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL) == ESP_ERR_INVALID_ARG);
i2s_config.dma_desc_num = 129;
TEST_ASSERT(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL) == ESP_ERR_INVALID_ARG);
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_STATE, i2s_driver_uninstall(I2S_NUM_0));
}
TEST_CASE("I2S Loopback test(master tx and rx)", "[i2s]")
{
// master driver installed and send data
i2s_config_t master_i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_TX | I2S_MODE_RX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
i2s_pin_config_t master_pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = DATA_OUT_IO,
.data_in_num = DATA_IN_IO
};
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
i2s_test_io_config(I2S_TEST_MODE_LOOPBACK);
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
uint8_t *data_wr = (uint8_t *)malloc(sizeof(uint8_t) * 400);
size_t i2s_bytes_write = 0;
size_t bytes_read = 0;
int length = 0;
uint8_t *i2s_read_buff = (uint8_t *)malloc(sizeof(uint8_t) * 10000);
for (int i = 0; i < 100; i++) {
data_wr[i] = i + 1;
}
int flag = 0; // break loop flag
int end_position = 0;
// write data to slave
i2s_write(I2S_NUM_0, data_wr, sizeof(uint8_t) * 400, &i2s_bytes_write, 1000 / portTICK_PERIOD_MS);
while (!flag) {
if (length >= 10000 - 500) {
break;
}
i2s_read(I2S_NUM_0, i2s_read_buff + length, sizeof(uint8_t) * 500, &bytes_read, 1000 / portMAX_DELAY);
if (bytes_read > 0) {
for (int i = length; i < length + bytes_read; i++) {
if (i2s_read_buff[i] == 100) {
flag = 1;
end_position = i;
break;
}
}
}
length = length + bytes_read;
}
// test the read data right or not
for (int i = end_position - 99; i <= end_position; i++) {
TEST_ASSERT_EQUAL_UINT8((i - end_position + 100), *(i2s_read_buff + i));
}
free(data_wr);
free(i2s_read_buff);
i2s_driver_uninstall(I2S_NUM_0);
}
#if SOC_I2S_SUPPORTS_TDM
TEST_CASE("I2S TDM Loopback test(master tx and rx)", "[i2s]")
{
// master driver installed and send data
i2s_config_t master_i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_TX | I2S_MODE_RX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_MULTIPLE,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.total_chan = 4,
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1 | I2S_TDM_ACTIVE_CH2 | I2S_TDM_ACTIVE_CH3,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
};
i2s_pin_config_t master_pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = DATA_OUT_IO,
.data_in_num = DATA_IN_IO
};
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
i2s_test_io_config(I2S_TEST_MODE_LOOPBACK);
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
uint8_t *data_wr = (uint8_t *)malloc(sizeof(uint8_t) * 400);
size_t i2s_bytes_write = 0;
size_t bytes_read = 0;
int length = 0;
uint8_t *i2s_read_buff = (uint8_t *)malloc(sizeof(uint8_t) * 10000);
for (int i = 0; i < 100; i++) {
data_wr[i] = i + 1;
}
int flag = 0; // break loop flag
int end_position = 0;
// write data to slave
i2s_write(I2S_NUM_0, data_wr, sizeof(uint8_t) * 400, &i2s_bytes_write, 1000 / portTICK_PERIOD_MS);
while (!flag) {
if (length >= 10000 - 500) {
break;
}
i2s_read(I2S_NUM_0, i2s_read_buff + length, sizeof(uint8_t) * 500, &bytes_read, 1000 / portMAX_DELAY);
if (bytes_read > 0) {
for (int i = length; i < length + bytes_read; i++) {
if (i2s_read_buff[i] == 100) {
flag = 1;
end_position = i;
break;
}
}
}
length = length + bytes_read;
}
// test the read data right or not
for (int i = end_position - 99; i <= end_position; i++) {
TEST_ASSERT_EQUAL_UINT8((i - end_position + 100), *(i2s_read_buff + i));
}
free(data_wr);
free(i2s_read_buff);
i2s_driver_uninstall(I2S_NUM_0);
}
#endif
#if SOC_I2S_NUM > 1
/* ESP32S2 and ESP32C3 has only single I2S port and hence following test cases are not applicable */
TEST_CASE("I2S write and read test(master tx and slave rx)", "[i2s]")
{
// master driver installed and send data
i2s_config_t master_i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
i2s_pin_config_t master_pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = DATA_OUT_IO,
.data_in_num = -1
};
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
i2s_test_io_config(I2S_TEST_MODE_MASTER_TO_SLAVE);
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
i2s_config_t slave_i2s_config = {
.mode = I2S_MODE_SLAVE | I2S_MODE_RX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
i2s_pin_config_t slave_pin_config = {
.mck_io_num = -1,
.bck_io_num = SLAVE_BCK_IO,
.ws_io_num = SLAVE_WS_IO,
.data_out_num = -1,
.data_in_num = DATA_IN_IO,
};
// slave driver installed and receive data
TEST_ESP_OK(i2s_driver_install(I2S_NUM_1, &slave_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_1, &slave_pin_config));
i2s_test_io_config(I2S_TEST_MODE_MASTER_TO_SLAVE);
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
uint8_t *data_wr = (uint8_t *)malloc(sizeof(uint8_t) * 400);
size_t i2s_bytes_write = 0;
size_t bytes_read = 0;
int length = 0;
uint8_t *i2s_read_buff = (uint8_t *)malloc(sizeof(uint8_t) * 10000);
for (int i = 0; i < 100; i++) {
data_wr[i] = i + 1;
}
int flag = 0; // break loop flag
int end_position = 0;
// write data to slave
i2s_write(I2S_NUM_0, data_wr, sizeof(uint8_t) * 400, &i2s_bytes_write, 1000 / portTICK_PERIOD_MS);
printf("write data size: %d\n", i2s_bytes_write);
while (!flag) {
i2s_read(I2S_NUM_1, i2s_read_buff + length, sizeof(uint8_t) * 500, &bytes_read, 1000 / portTICK_PERIOD_MS);
if (bytes_read > 0) {
printf("read data size: %d\n", bytes_read);
for (int i = length; i < length + bytes_read; i++) {
if (i2s_read_buff[i] == 100) {
flag = 1;
end_position = i;
break;
}
}
}
length = length + bytes_read;
}
// test the readed data right or not
for (int i = end_position - 99; i <= end_position; i++) {
TEST_ASSERT_EQUAL_UINT8((i - end_position + 100), *(i2s_read_buff + i));
}
free(data_wr);
free(i2s_read_buff);
i2s_driver_uninstall(I2S_NUM_0);
i2s_driver_uninstall(I2S_NUM_1);
}
TEST_CASE("I2S write and read test(master rx and slave tx)", "[i2s]")
{
// master driver installed and send data
i2s_config_t master_i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_RX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 1,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
i2s_pin_config_t master_pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = -1,
.data_in_num = DATA_IN_IO,
};
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
i2s_test_io_config(I2S_TEST_MODE_SLAVE_TO_MAXTER);
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
i2s_config_t slave_i2s_config = {
.mode = I2S_MODE_SLAVE | I2S_MODE_TX, // Only RX
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT, //2-channels
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 1,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
i2s_pin_config_t slave_pin_config = {
.mck_io_num = -1,
.bck_io_num = SLAVE_BCK_IO,
.ws_io_num = SLAVE_WS_IO,
.data_out_num = DATA_OUT_IO,
.data_in_num = -1
};
// slave driver installed and receive data
TEST_ESP_OK(i2s_driver_install(I2S_NUM_1, &slave_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_1, &slave_pin_config));
i2s_test_io_config(I2S_TEST_MODE_SLAVE_TO_MAXTER);
printf("\r\nheap size: %d\n", esp_get_free_heap_size());
uint8_t *data_wr = (uint8_t *)malloc(sizeof(uint8_t) * 400);
size_t i2s_bytes_write = 0;
size_t bytes_read = 0;
int length = 0;
uint8_t *i2s_read_buff = (uint8_t *)malloc(sizeof(uint8_t) * 10000);
for (int i = 0; i < 100; i++) {
data_wr[i] = i + 1;
}
// slave write data to master
i2s_write(I2S_NUM_1, data_wr, sizeof(uint8_t) * 400, &i2s_bytes_write, 1000 / portTICK_PERIOD_MS);
printf("write data size: %d\n", i2s_bytes_write);
int flag = 0; // break loop flag
volatile int end_position = 0;
// write data to slave
while (!flag) {
TEST_ESP_OK(i2s_read(I2S_NUM_0, i2s_read_buff + length, 10000 - length, &bytes_read, 1000 / portTICK_PERIOD_MS));
if (bytes_read > 0) {
printf("read data size: %d\n", bytes_read);
for (int i = length; i < length + bytes_read; i++) {
if (i2s_read_buff[i] == 100) {
flag = 1;
end_position = i;
break;
}
}
}
length = length + bytes_read;
}
// test the readed data right or not
for (int i = end_position - 99; i <= end_position; i++) {
TEST_ASSERT_EQUAL_UINT8((i - end_position + 100), *(i2s_read_buff + i));
}
free(data_wr);
free(i2s_read_buff);
i2s_driver_uninstall(I2S_NUM_0);
i2s_driver_uninstall(I2S_NUM_1);
}
#endif
TEST_CASE("I2S memory leaking test", "[i2s]")
{
i2s_config_t master_i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_RX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 100,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
i2s_pin_config_t master_pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = -1,
.data_in_num = DATA_IN_IO
};
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
i2s_driver_uninstall(I2S_NUM_0);
int initial_size = esp_get_free_heap_size();
for (int i = 0; i < 100; i++) {
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &master_i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &master_pin_config));
i2s_driver_uninstall(I2S_NUM_0);
TEST_ASSERT(initial_size == esp_get_free_heap_size());
}
vTaskDelay(100 / portTICK_PERIOD_MS);
TEST_ASSERT(initial_size == esp_get_free_heap_size());
}
#if SOC_I2S_SUPPORTS_APLL
/*
* The I2S APLL clock variation test used to test the difference between the different sample rates, different bits per sample
* and the APLL clock generate for it. The TEST_CASE passes PERCENT_DIFF variation from the provided sample rate in APLL generated clock
* The percentage difference calculated as (mod((obtained clock rate - desired clock rate)/(desired clock rate))) * 100.
*/
TEST_CASE("I2S APLL clock variation test", "[i2s]")
{
i2s_pin_config_t pin_config = {
.mck_io_num = -1,
.bck_io_num = MASTER_BCK_IO,
.ws_io_num = MASTER_WS_IO,
.data_out_num = DATA_OUT_IO,
.data_in_num = -1
};
i2s_config_t i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 60,
.use_apll = true,
.intr_alloc_flags = 0,
#if SOC_I2S_SUPPORTS_TDM
.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1,
.total_chan = 2,
.left_align = false,
.big_edin = false,
.bit_order_msb = false,
.skip_msk = false
#endif
};
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &pin_config));
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
int initial_size = esp_get_free_heap_size();
uint32_t sample_rate_arr[8] = { 10675, 11025, 16000, 22050, 32000, 44100, 48000, 96000 };
int bits_per_sample_arr[3] = { 16, 24, 32 };
for (int i = 0; i < (sizeof(sample_rate_arr) / sizeof(sample_rate_arr[0])); i++) {
for (int j = 0; j < (sizeof(bits_per_sample_arr) / sizeof(bits_per_sample_arr[0])); j++) {
i2s_config.sample_rate = sample_rate_arr[i];
i2s_config.bits_per_sample = bits_per_sample_arr[j];
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, &pin_config));
TEST_ASSERT((fabs((i2s_get_clk(I2S_NUM_0) - sample_rate_arr[i])) / (sample_rate_arr[i])) * 100 < PERCENT_DIFF);
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
TEST_ASSERT(initial_size == esp_get_free_heap_size());
}
}
vTaskDelay(100 / portTICK_PERIOD_MS);
TEST_ASSERT(initial_size == esp_get_free_heap_size());
}
#endif
#if SOC_I2S_SUPPORTS_ADC
/* Only ESP32 need I2S adc/dac test */
TEST_CASE("I2S adc test", "[i2s]")
{
// init I2S ADC
i2s_config_t i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_ADC_BUILT_IN,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.intr_alloc_flags = 0,
.dma_desc_num = 2,
.dma_frame_num = 1024,
.use_apll = 0,
};
// install and start I2S driver
i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL);
// init ADC pad
i2s_set_adc_mode(ADC_UNIT_1, ADC1_CHANNEL_4);
// enable adc sampling, ADC_WIDTH_BIT_12, ADC_ATTEN_DB_11 hard-coded in adc_i2s_mode_init
i2s_adc_enable(I2S_NUM_0);
// init read buffer
uint16_t *i2sReadBuffer = (uint16_t *)calloc(1024, sizeof(uint16_t));
size_t bytesRead;
for (int loop = 0; loop < 10; loop++) {
for (int level = 0; level <= 1; level++) {
if (level == 0) {
gpio_set_pull_mode(ADC1_CHANNEL_4_IO, GPIO_PULLDOWN_ONLY);
} else {
gpio_set_pull_mode(ADC1_CHANNEL_4_IO, GPIO_PULLUP_ONLY);
}
vTaskDelay(200 / portTICK_RATE_MS);
// read data from adc, will block until buffer is full
i2s_read(I2S_NUM_0, (void *)i2sReadBuffer, 1024 * sizeof(uint16_t), &bytesRead, portMAX_DELAY);
// calc average
int64_t adcSumValue = 0;
for (size_t i = 0; i < 1024; i++) {
adcSumValue += i2sReadBuffer[i] & 0xfff;
}
int adcAvgValue = adcSumValue / 1024;
printf("adc average val: %d\n", adcAvgValue);
if (level == 0) {
if (adcAvgValue > 100) {
i2s_adc_disable(I2S_NUM_0);
free(i2sReadBuffer);
i2s_driver_uninstall(I2S_NUM_0);
TEST_ASSERT_LESS_THAN(100, adcAvgValue);
}
} else {
if (adcAvgValue < 4000) {
i2s_adc_disable(I2S_NUM_0);
free(i2sReadBuffer);
i2s_driver_uninstall(I2S_NUM_0);
TEST_ASSERT_GREATER_THAN(4000, adcAvgValue);
}
}
}
}
i2s_adc_disable(I2S_NUM_0);
free(i2sReadBuffer);
i2s_driver_uninstall(I2S_NUM_0);
}
#endif
#if SOC_I2S_SUPPORTS_DAC
TEST_CASE("I2S dac test", "[i2s]")
{
// dac, adc i2s
i2s_config_t i2s_config = {
.mode = I2S_MODE_MASTER | I2S_MODE_TX,
.sample_rate = SAMPLE_RATE,
.bits_per_sample = SAMPLE_BITS,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
.dma_desc_num = 6,
.dma_frame_num = 60,
.use_apll = 0,
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
};
//install and start i2s driver
TEST_ESP_OK(i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL));
//for internal DAC, this will enable both of the internal channels
TEST_ESP_OK(i2s_set_pin(I2S_NUM_0, NULL));
//stop & destroy i2s driver
TEST_ESP_OK(i2s_driver_uninstall(I2S_NUM_0));
}
#endif
#endif //SOC_I2S_SUPPORTED