esp-idf/components/idf_test/integration_test/TC_IT_MESH_EST.yml

.MESH_CASE: &MESH_CASE
  SDK: ESP32_IDF
  Test App: SSC_MESH
  auto test: 'Yes'
  category: Function
  test point 1: self organized function
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T50_MESH1
  execution time: 0.0
  module: Mesh
  sub module: Establish
  version: v1 (2018-08-15)
  CI ready: 'No'
  level: Integration
  allow fail: ''

.mesh_init_all_duts: &mesh_init_all_duts
  LIST_MERGE:
    - - 'MSSC SSC[1-<node_num>] mesh -I'
      - ['P SSC[1-<node_num>] C +MESH:INIT,OK']

.mesh_start_all_duts: &mesh_start_all_duts
  LIST_MERGE:
    - - 'MSSC SSC[1-<node_num>] mesh -T'
      - ['P SSC[1-<node_num>] C +MESH:START,OK']

.mesh_config_all_duts: &mesh_config_all_duts
  LIST_MERGE:
    - - 'MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
      - ['P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
        <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>'
      - ['P SSC[1-<node_num>] C +MESHSET:CFG,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>'
      - ['P SSC[1-<node_num>] C +MESHSET:MLAYER,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
      - ['P SSC[1-<node_num>] C +MESHSET:SWITCH,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>'
      - ['P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>'
      - ['P SSC[1-<node_num>] C +MESHSET:ASSOC,OK']

.mesh_config_all_duts_no_router: &mesh_config_all_duts_no_router
  LIST_MERGE:
    - - 'SSC SSC1 meshset -T -o 0 -t 1'
      - ['P SSC1 C +MESHSET:TYPE,OK']
    - - 'MSSC SSC[2-<node_num>] meshset -X -o 0 -i 1'
      - ['P SSC[2-<node_num>] C +MESHSET:FIX_ROOT,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
      - ['P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK']
    - - 'SSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>'
      - ['P SSC[1-<node_num>] C +MESHSET:CFG,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>'
      - ['P SSC[1-<node_num>] C +MESHSET:MLAYER,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
      - ['P SSC[1-<node_num>] C +MESHSET:SWITCH,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>'
      - ['P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK']
    - - 'MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>'
      - ['P SSC[1-<node_num>] C +MESHSET:ASSOC,OK']

.mesh_config_dut1: &mesh_config_dut1
  LIST_MERGE:
    - - 'SSC SSC1 meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
      - ['P SSC1 C +MESHSET:MAP_AUTH,OK']
    - - 'SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
        <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>'
      - ['P SSC1 C +MESHSET:CFG,OK']
    - - 'SSC SSC meshset -L -o 0 -l <max_layer>'
      - ['P SSC1 C +MESHSET:MLAYER,OK']
    - - 'SSC SSC1 meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
      - ['P SSC1 C +MESHSET:SWITCH,OK']
    - - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
    - - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
      - ['P SSC1 C +MESHSET:ALLOW_ROOTS,OK']
    - - 'SSC SSC1 meshset -J -o 0 -t <assoc_expire>'
      - ['P SSC1 C +MESHSET:ASSOC,OK']

.mesh_config_dut1_no_router: &mesh_config_dut1_no_router
  LIST_MERGE:
    - - 'SSC SSC1 meshset -T -o 0 -t 1'
      - ['P SSC1 C +MESHSET:TYPE,OK']
    - - 'SSC SSC1 meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
      - ['P SSC1 C +MESHSET:MAP_AUTH,OK']
    - - 'SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>'
      - ['P SSC1 C +MESHSET:CFG,OK']
    - - 'SSC SSC1 meshset -L -o 0 -l <max_layer>'
      - ['P SSC1 C +MESHSET:MLAYER,OK']
    - - 'SSC SSC1 meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
      - ['P SSC1 C +MESHSET:SWITCH,OK']
    - - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
    - - 'SSC SSC1 meshset -K -o 0 -i <allow_roots>'
      - ['P SSC1 C +MESHSET:ALLOW_ROOTS,OK']
    - - 'SSC SSC1 meshset -J -o 0 -t <assoc_expire>'
      - ['P SSC1 C +MESHSET:ASSOC,OK']

.mesh_config_cs_duts: &mesh_config_cs_duts
  LIST_MERGE:
    - - 'MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10'
      - ['P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK']
    - - 'MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n <try_channel> -h 1 -t
        <max_connect> -e <map_password> -i <ie_encrypt>'
      - ['P SSC[4-<node_num>] C +MESHSET:CFG,OK']
    - - 'MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>'
      - ['P SSC[4-<node_num>] C +MESHSET:MLAYER,OK']
    - - 'MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>'
      - ['P SSC[4-<node_num>] C +MESHSET:SWITCH,OK']
    - - 'MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>'
      - ['P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK']
    - - 'MSSC SSC[4-<node_num>] meshset -J -o 0 -t 15'
      - ['P SSC[4-<node_num>] C +MESHSET:ASSOC,OK']

.mesh_check_tree_num: &mesh_check_tree_num
  LIST_MERGE:
    - - 'MSSC SSC[1-<node_num>] mesh -Q -o 2'
      - ['P SSC[1-<node_num>] T topo']
    - - 'MESHTREE'
      - ['R PC_COM RE "MESHTREE:%%s"%%(<tree_node_num>)']

.mesh_tree_stably: &mesh_tree_stably
  LIST_MERGE:
    - - 'SSC MNODE(0) mesh -Q -o 1 -t <stable_check_time>'
      - ['R MNODE(0) C MESH_STABLE_CHECK:PASS']

.est_performance_cmd_set: &est_performance_cmd_set
  LIST_MERGE:
    - - 'test_counts = 15'
      - ['']
    - - 'start_number_list = [0]'
      - ['']
    - - 'ie_encrypt = True'
      - ['']
    - - 'establish_fail_time = 1200'
      - ['']
    - - 'assoc_time = 20'
      - ['']
    - - 'stable_time = 120'
      - ['']
    - - 'map_encrypt = True'
      - ['']
    - - 'destroy_mode = "deinit"'
      - ['']

test cases:
- ID: MESH_EST_0101
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n 15 -t <max_connect>
    - - R SSC1 C +MESHSET:CFG,FAIL
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n <router_channel> -t 11
    - - R SSC1 C +MESHSET:CFG,FAIL
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n <router_channel> -t 0
    - - R SSC1 C +MESHSET:CFG,FAIL
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect>
    - - R SSC1 C +MESHSET:CFG,FAIL
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -G -o 1
    - - P SSC1 RE "MESH_ID,%%s"%%(<mesh_id>)
      - P SSC1 C +MESHGET:CFG,OK
  expected result: |-
    1. fail
    2. fail
    3. fail
    4. fail
    5. succeed    
  steps: |-
    1. mesh init
    2. set config with channel 15
    3. set config with max_connection 0 / 11
    4. set config without router ssid
    5. set/get valid config    
  test environment: SSC_T1_MESH1
  summary: mesh set/get config before mesh start
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0102
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -S -o 0 -t 0
    - - P SSC1 C +MESHSET:SCAN_TIME,FAIL
  - - SSC SSC1 meshset -S -o 0 -t 2000
    - - P SSC1 C +MESHSET:SCAN_TIME,FAIL
  - - SSC SSC1 meshset -S -o 0 -t 500
    - - P SSC1 C +MESHSET:SCAN_TIME,OK
  - - SSC SSC1 meshset -S -o 1
    - - P SSC1 C +MESHGET:SCAN_TIME,OK,500
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid scan time
    3. set/get valid scan time    
  test environment: SSC_T1_MESH1
  summary: mesh set/get passive scan time before mesh start
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0103
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -Q -o 0 -i 15
    - - P SSC1 C +MESHSET:QSIZE,FAIL
  - - SSC SSC1 meshset -Q -o 0 -i 40
    - - P SSC1 C +MESHSET:QSIZE,OK
  - - SSC SSC1 meshset -Q -o 1
    - - P SSC1 C +MESHGET:QSIZE,OK,40
  expected result: |-
    1. succeed
    2. fail
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid qsize
    3. set/get valid qsize    
  test environment: SSC_T1_MESH1
  summary: mesh set/get qsize before mesh start
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0104
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -P -o 0 -n 0
    - - P SSC1 C +MESHSET:PERCENT,FAIL
  - - SSC SSC1 meshset -P -o 0 -n 110
    - - P SSC1 C +MESHSET:PERCENT,FAIL
  - - SSC SSC1 meshset -P -o 0 -n 100
    - - P SSC1 C +MESHSET:PERCENT,OK
  - - SSC SSC1 meshset -P -o 1
    - - P SSC1 C +MESHGET:PERCENT,OK,1
  expected result: |-
    1. succeed
    2. fail
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid vote percentage
    3. set/get valid vote percentage    
  test environment: SSC_T1_MESH1
  summary: mesh set/get vote percentage before mesh start
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0105
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
#  - - SSC SSC1 meshset -Z -x 1 -o 0 -t 300 -l 3000
#    - - P SSC1 C +MESHSET:ANNOUNCE,FAIL
#  - - SSC SSC1 meshset -Z -x 1 -o 0 -t 500 -l 1000
#    - - P SSC1 C +MESHSET:ANNOUNCE,FAIL
  - - SSC SSC1 meshset -Z -x 1 -o 0 -t 500 -l 3000
    - - P SSC1 C +MESHSET:ANNOUNCE,OK
  - - SSC SSC1 meshset -Z -x 1 -o 1
    - - P SSC1 C +MESHGET:ANNOUNCE,OK,500,3000
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid announce interval
    3. set/get valid announce interval    
  test environment: SSC_T1_MESH1
  summary: mesh set/get announce interval before mesh start
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0106
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -J -o 0 -t 9
    - - P SSC1 C +MESHSET:ASSOC,FAIL
  - - SSC SSC1 meshset -J -o 0 -t 10
    - - P SSC1 C +MESHSET:ASSOC,OK
  - - SSC SSC1 meshset -J -o 1
    - - P SSC1 C +MESHGET:ASSOC,OK,10
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid assoc expire
    3. set/get valid assoc expire    
  test environment: SSC_T1_MESH1
  summary: mesh set/get assoc expire before mesh start
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0107 #TODO: support max_layer>127
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -L -o 0 -l 0
    - - P SSC1 C +MESHSET:MLAYER,FAIL
  - - SSC SSC1 meshset -L -o 0 -l -1
    - - P SSC1 C +MESHSET:MLAYER,FAIL
  - - SSC SSC1 meshset -L -o 0 -l 65537
    - - P SSC1 C +MESHSET:MLAYER,FAIL
#  - - SSC SSC1 meshset -L -o 0 -l 26
#    - - P SSC1 C +MESHSET:MLAYER,FAIL
  - - SSC SSC1 meshset -L -o 0 -l 1
    - - P SSC1 C +MESHSET:MLAYER,OK
  - - SSC SSC1 meshset -L -o 1
    - - P SSC1 C +MESHGET:MLAYER,OK,1
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid max_layer
    3. set/get valid max_layer    
  test environment: SSC_T1_MESH1
  summary: mesh set/get max_lay test
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0108 #TODO: map_password can only be set in esp_mesh_set_config
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC1 C +MESHSET:MAP_AUTH,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -o 0 -L -l 2
    - - P SSC1 C +MESHSET:MLAYER,OK
  - - SSC SSC1 meshset -P -o 0 -n 60
    - - P SSC1 C +MESHSET:PERCENT,OK
  - - SSC SSC1 meshset -o 0 -J -t 20
    - - P SSC1 C +MESHSET:ASSOC,OK
  - - SSC SSC1 meshset -o 0 -K -i 1
    - - P SSC1 C +MESHSET:ALLOW_ROOTS,OK
  - - SSC SSC1 meshset -S -o 0 -t 500
    - - P SSC1 C +MESHSET:SCAN_TIME,OK
  - - SSC SSC1 meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC1 C +MESHSET:SWITCH,OK
  - - SSC SSC1 meshset -H -o 0 -t <threshold_high> -i <threshold_medium> -l <threshold_low>
    - - P SSC1 C +MESHSET:THRESHOLD,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init
    2. set invalid max_layer
    3. set/get valid max_layer    
  test environment: SSC_T1_MESH1
  summary: mesh set all configurations in order
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0110
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] meshset -o 0 -L -l 1
    - - P SSC[1-2] C +MESHSET:MLAYER,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 10
    - - P SSC[1-2] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config two duts with max_lay = 0
    2. start mesh
    3. check .....    
  test environment: SSC_T2_MESH1
  summary: two duts establish mesh network with max layer = 1
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0111
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e [<map_password>,<temp_string>] -i 0
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - DELAY 20
    - - P PC_COM C DELAYDONE
      - P SSC2 NC MESH_EVENT_CONNECTED
      - P SSC1 NC MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config two duts with different map_password and ie not encrypted
    2. start mesh
    3. check not connected    
  test environment: SSC_T2_MESH1
  summary: two duts establish mesh network with different map_password
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0112
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i [0,1]
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 10
    - - P SSC[1-2] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config two duts with different ie_encrypt
    2. start mesh
    3. check both connected with router    
  test environment: SSC_T2_MESH1
  summary: two duts establish mesh network with different ie_encrypt
  test point 2: mesh configuration test
  CI ready: 'Yes'
- ID: MESH_EST_0113
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      [<router_channel>,<wrong_channel>] -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
      - P SSC2 C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config two duts with different channel
    2. start mesh
    3. check dut1 connected and dut2 disconnected    
  test environment: SSC_T2_MESH1
  summary: two duts establish mesh network with different channel
  test point 2: mesh configuration test
  CI ready: 'No'
  #TODO: not work after v3.3
- ID: MESH_EST_0114
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] meshset -o 0 -L -l [2,1]
    - - P SSC[1-2] C +MESHSET:MLAYER,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - SSC SSC[1-2] mesh -Q -o 2
    - - P SSC[1-2] T topo
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. config two duts with different max_layer [2,1]
    2. start dut1(max_layer=2) first
    3. dut1 connected with router then start dut2(max_layer=1)
    4. check .....    
  test environment: SSC_T2_MESH1
  summary: (ASSERT) two duts establish mesh network with different max_layer[2,1]
  test point 2: mesh configuration test
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_0115
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] mesh -I
    - - P SSC[1-3] C +MESH:INIT,OK
  - - SSC SSC[1-3] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-3] C +MESHSET:CFG,OK
  - - SSC SSC[1-3] meshset -o 0 -L -l 2
    - - P SSC[1-3] C +MESHSET:MLAYER,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - SSC SSC1 mesh -Q -o 3
    - - ''
  - - DELAY 5
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
  - - SSC SSC3 mesh -T
    - - P SSC3 C +MESH:START,OK
  - - SSC SSC[1-3] mesh -Q -o 3
    - - ''
  - - DELAY 10
    - - P SSC3 C MESH_EVENT_NO_PARENT_FOUND
  - - DELAY 60
    - - ''
  - - SSC SSC[1-3] mesh -Q -o 2
    - - P SSC[1-3] T topo
# TODO: check more?
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. config 3 duts with different max_layer=2 and max_connect=1
    2. start dut1(max_layer=2) first
    3. dut1 connected with router then start dut2(max_layer=1)
    3. dut1 connected with router then start dut2(max_layer=1)
    4. check .....    
  test environment: SSC_T3_MESH1
  summary: 3 duts establish mesh network with max_connection 1 and max_layer 2
  test point 2: mesh configuration test
  CI ready: 'No'
- ID: MESH_EST_0201
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config
    3. mesh start
    4. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: dut1 establish mesh network with simple configuration
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0202
  <<: *MESH_CASE
  cmd set:
  - ''
  - - LOOP 2 6 "[2,3]"
    - - ''
  - - SSC SSC1 reboot
    - - P SSC1 C !!!ready!!!
  - - SSC SSC1 op -S -o {%d}
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed
    5. succeed    
  steps: |-
    1. set wifi op_mode (AP/APSTA)
    2. mesh init
    3. mesh config
    4. mesh start
    5. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: dut1 start mesh in different wifi mode (AP/APSTA)
  test point 2: network establish test
  CI ready: 'No'
#TODO: add case: start mesh with station connected
- ID: MESH_EST_0203 #TODO: which step call wifi scan
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 sta -S
    - - P SSC1 C +SCAN_DONE:OK
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed
    5. succeed    
  steps: |-
    1. wifi scan
    2. mesh init
    3. mesh config
    4. mesh start
    5. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: dut1 start mesh during wifi scan
  test point 2: network establish test
  CI ready: 'No'
- ID: MESH_EST_0204
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 sta -C -s <router_ssid> -p <router_password>
    - - P SSC1 C +JAP:CONNECTED
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed
    5. succeed    
  steps: |-
    1. connect to router
    2. mesh init
    3. mesh config
    4. mesh start
    5. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: dut1 start mesh after wifi connected with router
  test point 2: network establish test
  CI ready: 'Yes'
#TODO: start during connecting to router
- ID: MESH_EST_0205
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config with max_layer 1
    3. mesh start
    4. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: dut1 start mesh with max layer 1, establish mesh network
  test point 2: network establish test
  CI ready: 'No'
- ID: MESH_EST_0206
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip>'
    - - P SOC_COM L OK
  - - SSC MNODE(0) mesh -S -o 0 -i <pc_ip> -t <test_tcp_port1>
    - - P MNODE(0) C +CONNECT,OK
      - P SOC1 C ACCEPT
  - - SOC SOC1 MACCEPT GSOC1
    - - P SOC_COM L OK
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. mesh network already established
    2. root connect to TCP server    
  initial condition: MESH_INIT1
  test environment: SSC_T1_MESH2
  summary: dut1 establish mesh network, then root connect to TCP server
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0207
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config
    3. mesh start
    4. check mesh tree established and stable    
  test environment: SSC_T2_MESH1
  summary: two duts start mesh together to establish mesh network
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0208
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 0
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config without ie_encrypt
    3. mesh start
    4. check mesh tree established and stable    
  test environment: SSC_T2_MESH1
  summary: two duts start mesh without ie_encrypt, establish mesh network
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0209
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config without map_password
    3. mesh start
    4. check mesh tree established and stable    
  test environment: SSC_T2_MESH1
  summary: two duts start mesh without map_password, establish mesh network
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0210
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. start mesh on dut1
    2. dut1 connected with router
    3. start mesh on dut2
    4. dut2 connected with dut1    
  test environment: SSC_T2_MESH1
  summary: dut2 start mesh after dut1 connected, establish mesh network
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0211
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - DELAY 10 30
    - - ''
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. start mesh on dut1
    2. dut1 connected with router
    3. delay some time then start mesh on dut2
    4. dut2 connected with dut1    
  test environment: SSC_T2_MESH1
  summary: dut2 start mesh after dut1 connected more than 10s, establish mesh network
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0212
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] meshset -o 0 -L -l 1
    - - P SSC[1-2] C +MESHSET:MLAYER,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config two duts with max_lay = 1
    2. start mesh
    3. check .....    
  sub module: Establish
  test environment: SSC_T2_MESH1
  summary: (ASSERT) 2 duts start mesh with max_layer=1, establish mesh network
  test point 2: network establish test
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_0213
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-12] mesh -I
    - - P SSC[1-12] C +MESH:INIT,OK
  - - MSSC SSC[1-12] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 10 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-12] C +MESHSET:CFG,OK
  - - MSSC SSC[1-12] meshset -o 0 -L -l 2
    - - P SSC[1-12] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-11] mesh -T
    - - P SSC[1-11] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config 11 duts with max_layer=2 and mac_connection=10
    2. 11 duts start mesh
    3. check mesh network establish    
  sub module: Establish
  test environment: SSC_T12_MESH1
  summary: establish special mesh_network with max_lay=2 and max_connection=10
  test point 2: network establish test
  CI ready: 'No'
- ID: MESH_EST_0214
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-7] mesh -I
    - - P SSC[1-7] C +MESH:INIT,OK
  - - MSSC SSC[1-7] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 2 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-7] C +MESHSET:CFG,OK
  - - MSSC SSC[1-7] meshset -o 0 -L -l 3
    - - P SSC[1-7] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-7] mesh -T
    - - P SSC[1-7] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> 7
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config 7 duts with max_lay=3 and max_connection=2
    2. 7 duts start mesh
    3. check mesh network establish    
  sub module: Establish
  test environment: SSC_T12_MESH1
  summary: set max_conn=2 and max_layer=3, establish full mesh tree
  test point 2: network establish test
  CI ready: 'No'
# TODO: full tree, destroy and re-establish
- ID: MESH_EST_0215
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-25] mesh -I
    - - P SSC[1-25] C +MESH:INIT,OK
  - - MSSC SSC[1-25] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-25] C +MESHSET:CFG,OK
  - - MSSC SSC[1-25] meshset -o 0 -L -l 25
    - - P SSC[1-25] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-25] mesh -T
    - - P SSC[1-25] C +MESH:START,OK
  - - DELAY 120
    - - ''
  - - VALUE <tree_node_num> 25
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config 25 duts with max_connection=1
    2. 25 duts start mesh
    3. check mesh network establish    
  test environment: SSC_T50_MESH1
  summary: establish special mesh_network with max_connection=1 and max_layer=25
  test point 2: network establish test
  CI ready: 'Yes'
- ID: MESH_EST_0216
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -o 0 -L -l <max_layer>
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config all duts with simple configuration
    2. all duts start mesh
    3. check mesh network establish    
  test environment: SSC_T50_MESH1
  summary: multiple nodes establish mesh_network simple configuration
  test point 2: network establish test
  CI ready: 'Yes'

- ID: MESH_EST_0301
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) reboot
    - - P MNODE(0) C !!!ready!!!
      - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
  - - DELAY 5
    - - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot root
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: 2 duts establish mesh network, then reboot root
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0302
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) mesh -I -o 1
    - - P MNODE(0,0) C MESH:DEINIT,OK
      - P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. layer2 stop mesh
    2. root find child leave    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: 2 duts establish mesh network, then layer2 stop mesh
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0303
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - DELAY 5
    - - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
  - - DELAY 15
    - - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. power reset root
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: 2 duts establish mesh network, then power reset root
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0304
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - SSC MNODE(0) op -S -o 2
    - - P MNODE(0) C +MODE:OK
      - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
  - - DELAY 15
    - - P MNODE(0,0) C MESH_EVENT_CONNECTED,1
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. power reset root and
    2. layer2 disconnected and then become new root    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: 2 duts establish mesh network, power reset root and switch to softAP mode
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0305
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -V -o 2
    - - P MNODE(0) C MESH:SAVE,OK
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - SSC MNODE(0) mesh -T -o 2
    - - P MNODE(0) C MESH:START,OK
  - - DELAY 10
    - - P MNODE(0) C MESH_EVENT_CONNECTED,1
      - P MNODE(0,0) C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root set auto start mesh and power reboot
    2. it become root again and the other node join    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: 2 duts establish mesh network, root restart mesh, it still root
  test point 2: network destroy test
  CI ready: 'No'
  #TODO: root still root after restart will not run on CI
- ID: MESH_EST_0306
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0,0)
    - - P MNODE(0,0) C !!!ready!!!
      - P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. power reset layer2
    2. root find child leave    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: 2 duts establish mesh network, then power reset layer2
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0307
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -I -o 1
    - - P MNODE(0) C MESH:DEINIT,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root mesh stop
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, root mesh stop
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0308
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) reboot
    - - P MNODE(0) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot root
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, reboot root
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0309
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. power reboot root
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, power reboot root
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0310
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -V -o 2
    - - P MNODE(0) C MESH:SAVE,OK
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - SSC MNODE(0) mesh -T -o 2
    - - P MNODE(0) C MESH:START,OK
  - - DELAY 10
    - - P MNODE(0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root set auto start mesh and power reboot
    2. it become root again and the other node join    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes establish mesh network, root restart mesh, it still root
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0311
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) mesh -I -o 1
    - - P MNODE(0,0) C MESH:DEINIT,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. one of layer2 nodes mesh deinit
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, one of layer2 nodes mesh deinit
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0313
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) reboot
    - - P MNODE(0,0) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot one of layer2 nodes
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, reboot one of layer2 nodes
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0314
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0,0)
    - - P MNODE(0,0) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot one of layer2 nodes
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, power reset one of layer2 nodes
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0315
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,-1) mesh -I -o 1
    - - P MNODE(0,-1) C MESH:DEINIT,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. one of leaf nodes mesh stop
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, one of leaf nodes mesh stop
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0316
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,-1) reboot
    - - P MNODE(0,-1) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot one of leaf nodes
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, reboot one of leaf nodes
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0317
  <<: *MESH_CASE
  cmd set:
  - ''
  - - FREBOOT MNODE(0,-1)
    - - P MNODE(0,-1) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. reboot one of leaf nodes
    2. others re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, power reset one of leaf nodes
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0318
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -V -o 2
    - - P MNODE(0) C MESH:SAVE,OK
  - - SSC MNODE(0) reboot
    - - P MNODE(0) C !!!ready!!!
  - - SSC MNODE(0) mesh -T -o 2
    - - P MNODE(0) C MESH:START,OK
  - - DELAY 10
    - - P MNODE(0) C MESH_EVENT_CONNECTED,1
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root restart mesh with same configuration
    2. re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, root reboot and start mesh, it still root
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0319
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -V -o 2
    - - P MNODE(0) C MESH:SAVE,OK
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - SSC MNODE(0) mesh -T -o 2
    - - P MNODE(0) C MESH:START,OK
  - - DELAY 10
    - - P MNODE(0) C MESH_EVENT_CONNECTED,1
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root restart mesh with same configuration
    2. re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, root power reset and start mesh, it still root
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0320
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -V -o 2
    - - P MNODE(0) C MESH:SAVE,OK
  - - SSC MNODE(0) reboot
    - - P MNODE(0) C !!!ready!!!
  - - DELAY 1 5
    - - ''
  - - SSC MNODE(0) mesh -T -o 2
    - - P MNODE(0) C MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. root restart mesh with same configuration
    2. re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, root reboot and wait some time, then start mesh
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0321
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1
  - - FREBOOT SSC1
    - - P SSC1 C !!!ready!!!
  - - DELAY 10
    - - P SSC2 C MESH_EVENT_DISCONNECTED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set dut2 ap mode, dut1 start mesh and connect to dut2
    2. power reset dut2 (station mode), check dut1 disconnected    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: power off router, check root disconnected
  test point 2: network destroy test
  CI ready: 'Yes'
- ID: MESH_EST_0322
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1
  - - FREBOOT SSC1
    - - P SSC1 C !!!ready!!!
  - - DELAY 10
    - - P SSC2 C MESH_EVENT_DISCONNECTED
  - - DELAY 30
    - - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
      - P SSC2 C MESH_EVENT_CONNECTED,1
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set dut2 ap mode, dut1 start mesh and connect to dut2
    2. power reset dut2 (station mode), check dut1 disconnected    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: power off router for a while, check root connected
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0323
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1
  - - SSC SSC1 ap -K -a 1
    - - P SSC1 C +AP:KICK
      - P SSC2 C MESH_EVENT_DISCONNECTED C MESH_EVENT_CONNECTED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set dut2 ap mode, dut1 start mesh and connect to dut2
    2. router deauth root, check dut1 disconnected then connected    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: router deauth root, check root disconnected then connected
  test point 2: network destroy test
  CI ready: 'Yes'
#TODO: waive root
- ID: MESH_EST_0324
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) mesh -W -o 0 -t 100
    - - P MNODE(0) C +MESH:VOTE,OK
  - - DELAY 1 3
    - - ''
  - - FREBOOT MNODE(0)
    - - P MNODE(0) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. waive_root and power reset root
    2. re-establish network    
  initial condition: MESH_INIT1
  test environment: SSC_T50_MESH1
  summary: multiple nodes, root waive vote after network established, then power reboot root
  test point 2: network destroy test
  CI ready: 'No'
- ID: MESH_EST_0501 #TODO: support layer>127
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config all duts with max_connection=1 and max_layer>127
    2. all duts start mesh
    3. check mesh network establish    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: (chain) establish mesh_network with max_connection=1 and max_layer>127
  test point 2: chain topology test
  CI ready: 'No'
  auto test: 'No'
- ID: MESH_EST_0502 #TODO: support layer>127
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config all duts with max_layer>127
    2. all duts start mesh
    3. check mesh network establish    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: (chain) establish mesh_network with max_layer>127
  test point 2: chain topology test
  CI ready: 'No'
  auto test: 'No'
- ID: MESH_EST_0503 #TODO: support layer>127
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] meshset -o 0 -L -l [127,128]
    - - P SSC[1-2] C +MESHSET:MLAYER,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 60
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. set a node with max_layer 127 and another 128
    2. 2 duts start mesh
    3. check mesh network establish    
  sub module: Establish
  test environment: SSC_T2_MESH1
  summary: (chain) set a node with max_layer 126 and another 127, establish mesh_network
  test point 2: chain topology test
  CI ready: 'No'
  auto test: 'No'
- ID: MESH_EST_0504 #TODO: support layer>127
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config all duts with max_layer>127
    2. all duts start mesh
    3. check mesh network establish
    4. reboot root, others re-establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: (chain) (ASSERT) establis mesh_network first, then reboot root
  test point 2: chain topology test
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_0505 #TODO: support layer>127
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t 1 -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -o 0 -L -l 1000
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. config all duts with max_layer>127
    2. all duts start mesh
    3. check mesh network establish
    4. reboot leaf, others re-establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: (chain) (ASSERT) establis mesh_network first, then reboot leaf
  test point 2: chain topology test
  CI ready: 'No'
  auto test: 'No'
- ID: MESH_EST_0601
  <<: *MESH_CASE
  cmd set:
  - MeshStress/MeshChannelSwitch
  - - 'simple_test = True'
    - ['']
  expected result: |-
    1. succeed    
  steps: |-
    1. channel switch function test    
  sub module: Establish
  test environment: SSC_T6_MESH1
  summary: (channel switch) channel switch function test
  test point 2: channel switch test
  CI ready: 'No'
  auto test: 'Yes'
- ID: MESH_EST_0602
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] op -S -o 2
    - - P SSC[1-2] C +MODE:OK
  - - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
    - - P SSC[1-2] C +SAP:OK
  - - SSC SSC2 op -S -o 1
    - - P SSC2 C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - SSC SSC2 op -S -o 2
    - - P SSC2 C +MODE:OK
  - - SSC SSC1 op -S -o 1
    - - P SSC1 C +MODE:OK
  - - DELAY 30
    - - P SSC2 C +SOFTAP:STACONNECTED
  - - DELAY 20
    - - ''
  - *mesh_check_tree_num
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:7
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1,dut2 set esp32 softAP in different channel
    2. dut[3-<node_num>] start mesh and connected with dut1
    3. reboot dut1's softAP, check dut[3-<node_num>] connected with dut2    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  stop router1,mesh network switch to another channel router network
  test point 2: channel switch test
  CI ready: 'No'
  auto test: 'Yes'
- ID: MESH_EST_0603
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] op -S -o 2
    - - P SSC[1-2] C +MODE:OK
  - - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
    - - P SSC[1-2] C +SAP:OK
  - - SSC SSC2 op -S -o 1
    - - P SSC2 C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - MSSC SSC2 op -S -o 2
    - - P SSC2 C +MODE:OK
  - - FREBOOT SSC1
    - - P SSC1 C !!!ready!!!
  - - DELAY 30
    - - P SSC2 C +SOFTAP:STACONNECTED
  - - DELAY 20
    - - ''
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:7
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1,dut2 set esp32 softAP in different channel
    2. dut[3-<node_num>] start mesh and connected with dut1
    3. stop dut1's softAP, check dut[3-<node_num>] connected with dut2    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  power reset router1,mesh network switch to another channel router network
  test point 2: channel switch test
- ID: MESH_EST_0604
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] op -S -o 2
    - - P SSC[1-2] C +MODE:OK
  - - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
    - - P SSC[1-2] C +SAP:OK
  - - SSC SSC2 op -S -o 1
    - - P SSC2 C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - SSC SSC2 op -S -o 2
    - - P SSC2 C +MODE:OK
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:6
  - - SSC SSC2 mac
    - - P SSC2 A <softap_mac>:\+APMAC:(.+)\r\n
  - - SSC MNODE(0) mesh -H -m <softap_mac> -n 7 -t 10
    - - P MNODE(0) C MESH:SWITCH_CHANNEL,OK
  - - DELAY <delay_time>
    - - P SSC2 C +SOFTAP:STACONNECTED
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:7
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. dut[1-2]set esp32 softAP in channel [6,7]
    2. dut[3-<node_num>] start mesh and connected with dut1
    3. root switch channel to new channel 7
    4. check dut[3-<node_num>] disconnected with dut1,connected to dut2,and switch to new channel    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: root switch channel,mesh form old network switch to another channel router network
  test point 2: channel switch test
- ID: MESH_EST_0605
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] op -S -o 2
    - - P SSC[1-3] C +MODE:OK
  - - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -n [1,6,11] -t <target_auth_enum>
    - - P SSC[1-3] C +SAP:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 1 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[4-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[4-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[4-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[4-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[4-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - *mesh_check_tree_num
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:1
  - - SSC SSC1 op -S -o 1
    - - P SSC1 C +MODE:OK
  - - DELAY 60
    - - ''
  - - MSSC SSC[4-<node_num>] mesh -Q -o 2
    - - P SSC[4-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. dut[1-3]set esp32 softAP in channel [1,6,11]
    2. dut[4-<node_num>] start mesh and connected with dut1
    3. dut1 set sta mode
    4. check dut[4-<node_num>] connected with router,and switch to new channel establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: stop router1,mesh choice switch to another channel router establish network
  test point 2: channel switch test
- ID: MESH_EST_0606
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] op -S -o 2
    - - P SSC[1-2] C +MODE:OK
  - - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
    - - P SSC[1-2] C +SAP:OK
  - - SSC SSC2 op -S -o 1
    - - P SSC2 C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - SSC SSC2 op -S -o 2
    - - P SSC2 C +MODE:OK
  - - SSC SSC1 op -S -o 1
    - - P SSC1 C +MODE:OK
  - - SSC MNODE(0) reboot
    - - P MNODE(0) C !!!ready!!!
  - - DELAY <delay_time>
    - - P SSC2 C +SOFTAP:STACONNECTED
  - - VALUE <tree_node_num> <tree_node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1,dut2 set esp32 softAP in different channel
    2. dut[3-<node_num>] start mesh and connected with dut1
    3. stop dut1's softAP and reboot root, check mesh switch channel and establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  stop dut1's softAP and reboot root, mesh choice switch to another channel router establish network
  test point 2: channel switch test
- ID: MESH_EST_0607
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1] op -S -o 2
    - - P SSC[1] C +MODE:OK
  - - SSC SSC[1] ap -S -s <target_ssid> -p <target_password> -n 6 -t <target_auth_enum>
    - - P SSC[1] C +SAP:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - SSC SSC[1] ap -S -s <target_ssid> -p <target_password> -n 7 -t <target_auth_enum>
    - - P SSC[1] C +SAP:OK
  - - DELAY 30
    - - P SSC1 C +SOFTAP:STACONNECTED
  - - DELAY 20
    - - ''
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:7
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1,dut2 set esp32 softAP in different channel
    2. dut[2-<node_num>] start mesh and connected with dut1
    3. stop dut1's softAP and reboot root, check mesh switch channel and establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  router switch another channel, mesh choice switch to another channel  establish network
  test point 2: channel switch test
- ID: MESH_EST_0608
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - - SSC SSC[4] meshset -T -o 0 -t 1
    - - P SSC[4] C +MESHSET:TYPE,OK
  - - MSSC SSC[5-<node_num>] meshset -X -o 0 -i 1
    - - P SSC[5-<node_num>] C +MESHSET:FIX_ROOT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[5-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - P SSC[5-<node_num>] C MESH_EVENT_CONNECTED
  - - SSC SSC[1] op -S -o 2
    - - P SSC[1] C +MODE:OK
  - - SSC SSC[1] ap -S -s <target_ssid> -p <target_password> -n 7 -t <target_auth_enum>
    - - P SSC[1] C +SAP:OK
  - - DELAY <delay_time>
    - - ''
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:7
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. no-router mesh network fix root
    2. dut[4-<node_num>] start mesh and establish mesh network
    3. dut1 set ap mode in diffent channel,check mesh switch channel and establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  mesh set fix root, choice switch to another channel link new router
  test point 2: channel switch test
- ID: MESH_EST_0609
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] op -S -o 2
    - - P SSC[1-2] C +MODE:OK
  - - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum>
    - - P SSC[1-2] C +SAP:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 6 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[4-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[4-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[4-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[4-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[4-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. set two router in different channel
    2. all duts set channel to the first router
    3. check mesh network connected with the first router    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: two routers, set channel, establish network
  test point 2: channel switch test
- ID: MESH_EST_0610
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] op -S -o 2
    - - P SSC[1-3] C +MODE:OK
  - - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -n
        [<router_channel>,<router_channel>,<wrong_channel>]
    - - P SSC[1-3] C +SAP:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - - MSSC SSC[4-<node_num>] mesh -Q -o 2
    - - P SSC[4-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
  - - DELAY 10
    - - P PC_COM C +DELAYDONE
      - P SSC[4-<node_num>] NC MESH_EVENT_DISCONNECTED
  execution time: 2.0
  expected result: |-
    1. set router
    2. check network establish    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. set three router with different channel
    2. start all nodes to establish mesh network    
  summary: multiple router, establish mesh network
  test point 2: channel switch test
  test environment: SSC_T50_MESH1
  CI ready: 'Yes'
  auto test: 'Yes'
- ID: MESH_EST_0611
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] op -S -o 2
    - - P SSC[1-3] C +MODE:OK
  - - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum> -n
        [<router_channel>,<router_channel>,<wrong_channel>]
    - - P SSC[1-3] C +SAP:OK
  - - SSC SSC[2-3] op -S -o 1
    - - P SSC[2-3] C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - - MSSC SSC[4-<node_num>] mesh -Q -o 2
    - - P SSC[4-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
  - - DELAY 10
    - - P PC_COM C +DELAYDONE
      - P SSC[4-<node_num>] NC MESH_EVENT_DISCONNECTED
  - - SSC SSC[2-3] op -S -o 2
    - - P SSC[2-3] C +MODE:OK
  - - FREBOOT SSC1
    - - P SSC1 C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - SSC SSC[2-3] op -S -o 2
    - - P SSC[2-3] C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -Q -o 2
    - - P SSC[4-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
  execution time: 2.0
  expected result: |-
    1. establish mesh network
    2. power reset router and check restablish mesh network    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. establish mesh network with channel and bssid allow switch
    2. power reset the the router, check the network connected with other router    
  summary: multiple router, network switch router
  test point 2: channel switch test
  test environment: SSC_T50_MESH1
- ID: MESH_EST_0612
  <<: *MESH_CASE
  cmd set:
  - MeshStress/MeshNetworkDestroy
  - - 'destroy_nodes = "MNODE(*,)"'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_INIT_SWITCH
  steps: |-
    1. enable all nodes establish network
    2. reboot all roots after network established    
  summary: multiple router, reboot all roots after network established
  test point 2: channel switch test
  test environment: SSC_T50_MESH1
- ID: MESH_EST_0613
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n 6 -t <target_auth_enum>
    - - P SSC1 C +SAP:OK
  - - MSSC SSC[2-<node_num>] mesh -I
    - - P SSC[2-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[2-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[2-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[2-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 6 -h 0 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[2-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[2-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[2-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[2-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[2-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[2-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[2-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[2-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[2-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[2-<node_num>] mesh -T
    - - P SSC[2-<node_num>] C +MESH:START,OK
  - - DELAY 60
    - - P SSC[2-<node_num>] C MESH_EVENT_CONNECTED
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n 7 -t <target_auth_enum>
    - - P SSC1 C +SAP:OK
  - - DELAY 30
    - - ''
  - - MSSC SSC[2-<node_num>] channel -G
    - - P SSC[2-<node_num>] C +CHANNEL:7
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - SSC MNODE(0,0) reboot
    - - P MNODE(0,0) C !!!ready!!!
  - - DELAY 60
    - - P MNODE(0,0,0) C MESH_EVENT_CONNECTED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 set esp32 softAP in channel 6
    2. dut[2-<node_num>] start mesh and connected with dut1
    3. set dut1's softAP dfferent channel and reboot dut MNODE(0,0), check MNODE(0,0,0) CONNECTED    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: mesh tree channel switch follow router,reboot layer2 check layer3
  test point 2: channel switch test
- ID: MESH_EST_0614
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] op -S -o 2
    - - P SSC[1-2] C +MODE:OK
  - - SSC SSC[1-2] ap -S -s <target_ssid> -p <target_password> -n [6,7] -t <target_auth_enum> -h 1
    - - P SSC[1-2] C +SAP:OK
  - - SSC SSC2 op -S -o 1
    - - P SSC2 C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - *mesh_config_cs_duts
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - - MSSC SSC2 op -S -o 2
    - - P SSC2 C +MODE:OK
  - - SSC SSC1 op -S -o 1
    - - P SSC1 C +MODE:OK
  - - DELAY <delay_time>
    - - P SSC2 C +SOFTAP:STACONNECTED
  - - DELAY 20
    - - ''
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:7
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1,dut2 set esp32 softAP in different channel
    2. dut[3-<node_num>] start mesh and connected with dut1
    3. stop dut1's softAP, check dut[3-<node_num>] connected with hide dut2    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  stop router1,mesh network switch to another channel hide router network
  test point 2: channel switch test
- ID: MESH_EST_0615
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] op -S -o 2
    - - P SSC[1-3] C +MODE:OK
  - - SSC SSC[1-3] ap -S -s <target_ssid> -p <target_password> -n [1,6,11] -t <target_auth_enum> -h 1
    - - P SSC[1-3] C +SAP:OK
  - - SSC SSC[2-3] op -S -o 1
    - - P SSC[2-3] C +MODE:OK
  - - MSSC SSC[4-<node_num>] mesh -I
    - - P SSC[4-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[4-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[4-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[4-<node_num>] meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 1 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[4-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[4-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[4-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[4-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[4-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[4-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[4-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[4-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[4-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[4-<node_num>] mesh -T
    - - P SSC[4-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>-3
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - *mesh_check_tree_num
  - - MSSC SSC[4-<node_num>] channel -G
    - - P SSC[4-<node_num>] C +CHANNEL:1
  - - SSC SSC1 op -S -o 1
    - - P SSC1 C +MODE:OK
  - - SSC SSC[2-3] op -S -o 2
    - - P SSC[2-3] C +MODE:OK
  - - DELAY 60
    - - ''
  - - MSSC SSC[4-<node_num>] mesh -Q -o 2
    - - P SSC[4-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>) NC ROOT_CONFLICT
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. dut[1-3]set esp32 softAP in channel [1,6,11]
    2. dut[4-<node_num>] start mesh and connected with dut1
    3. dut1 set sta mode
    4. check dut[4-<node_num>] connected with router,and switch to new channel establish mesh network    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary: stop router1,mesh choice switch to another hide channel router establish network
  test point 2: channel switch test
- ID: MESH_EST_0616
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - SSC SSC[1-3] meshset -T -o 0 -t 1
    - - P SSC[1-3] C +MESHSET:TYPE,OK
  - - MSSC SSC[4-<node_num>] meshset -X -o 0 -i 1
    - - P SSC[4-<node_num>] C +MESHSET:FIX_ROOT,OK
  - - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 0 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - - MSSC SSC[1-<node_num>] mesh -Q -o 2
    - - P SSC[1-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>)
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. no-router mesh set three roots
    2. dut[1-<node_num>] start mesh and establish mesh trees
    3. check mesh trees    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  mesh no router and set three roots, establish trees and check
  test point 2: channel switch test
- ID: MESH_EST_0617
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -T -o 0 -t 1
    - - P SSC[1-2] C +MESHSET:TYPE,OK
  - - MSSC SSC[3-<node_num>] meshset -X -o 0 -i 1
    - - P SSC[3-<node_num>] C +MESHSET:FIX_ROOT,OK
  - - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 0 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - - MSSC SSC[1-<node_num>] mesh -Q -o 2
    - - P SSC[1-<node_num>] T topo
  - - MESHTREE
    - - R PC_COM RE "TREE_TOTAL_NODES:%%s"%%(<tree_node_num>)
  - - SSC SSC1 reboot
    - - P SSC1 C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. no-router mesh set two roots
    2. dut[1-<node_num>] start mesh and establish mesh trees
    3. reboot dut1,check establish mesh trees    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  mesh no router and set two roots, reboot one root establish tree and check mesh tree
  test point 2: channel switch test
- ID: MESH_EST_0618
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - SSC SSC[1] meshset -T -o 0 -t 1
    - - P SSC[1] C +MESHSET:TYPE,OK
  - - MSSC SSC[2-<node_num>] meshset -X -o 0 -i 1
    - - P SSC[2-<node_num>] C +MESHSET:FIX_ROOT,OK
  - - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 6 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - *mesh_check_tree_num
  - - SSC SSC1 mesh -T -o 1
    - - P SSC1 C +MESH:STOP,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n 7 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - MSSC SSC[1-<node_num>] channel -G
    - - P SSC[1-<node_num>] C +CHANNEL:7
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. no-router mesh set fix root
    2. dut[1-<node_num>] start mesh and establish mesh trees
    3. stop dut1 set another channel then start,check establish mesh trees    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  no router change root to another channel, establish tree and check mesh tree
  test point 2: channel switch test
- ID: MESH_EST_0619
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - SSC SSC[1] meshset -T -o 0 -t 1
    - - P SSC[1] C +MESHSET:TYPE,OK
  - - MSSC SSC[2-<node_num>] meshset -X -o 0 -i 1
    - - P SSC[2-<node_num>] C +MESHSET:FIX_ROOT,OK
  - - MSSC SSC[1-<node_num>] meshset -M -o 0 -t <map_auth_mode> -e <map_password> -l 10
    - - P SSC[1-<node_num>] C +MESHSET:MAP_AUTH,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -n 6 -h 1 -t
      <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -L -o 0 -l <max_layer>
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] meshset -W -o 0 -t <duration_ms> -n <cnx_rssi> -l <select_rssi> -i <switch_rssi> -k <backoff_rssi>
    - - P SSC[1-<node_num>] C +MESHSET:SWITCH,OK
  - - MSSC SSC[1-<node_num>] meshset -K -o 0 -i <allow_roots>
    - - P SSC[1-<node_num>] C +MESHSET:ALLOW_ROOTS,OK
  - - MSSC SSC[1-<node_num>] meshset -J -o 0 -t <assoc_expire>
    - - P SSC[1-<node_num>] C +MESHSET:ASSOC,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - - DELAY <delay_time>
    - - ''
  - *mesh_check_tree_num
  - - SSC SSC1 mesh -H -n 7 -t 10
    - - P SSC1 C MESH:SWITCH_CHANNEL,OK
  - - DELAY <delay_time>
    - - ''
  - - MSSC SSC[1-<node_num>] channel -G
    - - P SSC[1-<node_num>] C +CHANNEL:7
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. no-router mesh set fix root
    2. dut[1-<node_num>] start mesh and establish mesh trees
    3. dut1 call channel switch API to another channel,check establish mesh trees    
  sub module: Establish
  test environment: SSC_T50_MESH1
  summary:  no router root call channel switch API, establish tree and check mesh tree
  test point 2: channel switch test
- ID: MESH_EST_3001
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -t <max_connect>
    - - P SSC1 C +MESHSET:CFG,FAIL
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -t <max_connect>
    - - P SSC1 C +MESHSET:CFG,OK
  expected result: |-
    1. fail
    2. succeed    
  steps: |-
    1. set config without init
    2. init and set config    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: mesh config without mesh init
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'Yes'
- ID: MESH_EST_3002
  <<: *MESH_CASE
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  cmd set:
  - ''
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,FAIL
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,FAIL
  expected result: |-
    1. fail
    2. fail    
  steps: |-
    1. mesh start without init
    2. mesh start without set config    
  summary: mesh start without init or config
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'Yes'
- ID: MESH_EST_3003
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 1 10
    - - ''
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. mesh init/config
    2. mesh start twice    
  test environment: SSC_T1_MESH1
  summary: mesh start again after mesh start
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'Yes'
  #TODO: if start twice will connected successfully
- ID: MESH_EST_3004
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - R SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -t <max_connect>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -M -o 0 -t 8 -s <map_password> -l 10
    - - P SSC1 C +MESHSET:MAP_AUTH,FAIL
  - - SSC SSC1 meshset -M -o 0 -t 3 -s <map_password> -l 100
    - - P SSC1 C +MESHSET:MAP_PWD,FAIL
  - - SSC SSC1 meshset -E -o 0 -i 1 -s <temp_string> -l 100
    - - P SSC1 C +MESHSET:MIE_KEY,FAIL
  expected result: |-
    1. succeed
    2. fail
    3. fail
    3. fail    
  steps: |-
    1. mesh init/config
    2. set map_password with auth=8
    3. set map_password with len>64
    4. set ie_key with len>64    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: mesh config with parameter value overflow
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'Yes'
- ID: MESH_EST_3005
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 op -S -o 1
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config and switch wifi op_mode to station
    3. mesh start
    4. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: (ASSERT) switch to station mode after mesh config
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_3006
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 op -S -o 2
    - - R SSC1 C +MODE:OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config and switch wifi op_mode to station
    3. mesh start
    4. check mesh connected and layer is 1    
  test environment: SSC_T1_MESH1
  summary: (ASSERT) switch to soft_ap mode after mesh config
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_3007
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <temp_string> -n <router_channel> -t <max_connect>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config with inexistent router
    3. mesh start
    4. check mesh no parent found    
  test environment: SSC_T1_MESH1
  summary: start mesh with inexistent router
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'Yes'
- ID: MESH_EST_3008
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <wrong_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init
    2. mesh config with wrong channel
    3. mesh start
    4. check parent not found    
  test environment: SSC_T1_MESH1
  summary: mesh start with wrong router channel
  test point 1: abnormal/special use
  test point 2: mesh init/config/start test
  CI ready: 'No'
  #TODO: not work after v3.3
- ID: MESH_EST_3101
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) sta -S
    - - P MNODE(0) C +SCANDONE
  - - DELAY 5
    - - P PC_COM C DELAYDONE
      - P MNODE(0) NC MESH_EVENT_SCAN_DONE
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. establish mesh network
    2. wifi scan and check no MESH_EVENT_SCAN_DONE    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: (ASSERT) wifi scan on root without set self organized
  test point 1: abnormal/special use
  test point 2: use wifi api after mesh start
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_3102
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) sta -S
    - - P MNODE(0,0) C +SCANDONE
      - P MNODE(0,0) NC MESH_EVENT_SCAN_DONE
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. establish mesh network
    2. wifi scan and check no MESH_EVENT_SCAN_DONE    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: (ASSERT) wifi scan on layer2 without set self organized
  test point 1: abnormal/special use
  test point 2: use wifi api after mesh start
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_3103
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 1
    - - ''
  - - SSC SSC1 sta -S
    - - P SSC1 C +SCANDONE
      - P SSC1 NC MESH_EVENT_SCAN_DONE
  - - ASSERT
    - - ''
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. establish mesh network
    2. wifi scan and check no MESH_EVENT_SCAN_DONE    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: (ASSERT) wifi scan during mesh scan without set self organized
  test point 1: abnormal/special use
  test point 2: use wifi api after mesh start
  CI ready: 'No'
  auto test: 'No'
  active: "No"
- ID: MESH_EST_3104
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - DELAY 5
    - - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 ap -Q
    - - R SSC2 A <softap_ssid>:\+APCONFIG:(\w+)
  - - SSC SSC1 sta -C -s <softap_ssid> -p <map_password>
    - - P SSC1 C +JAP:DISCONNECTED
  - - DELAY 10
    - - P PC_COM C DELAYDONE
      - P SSC1 NC +JAP:CONNECTED
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut2 start mesh
    2. dut1 connect to dut2, check disconnected    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: normal station can't connected with mesh root
  test point 1: abnormal/special use
  test point 2: use wifi api after mesh start
  CI ready: 'Yes'
#TODO: one(some) of the nodes set wrong password, establish----
- ID: MESH_EST_2001
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -U -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -b <router_bssid> -n
      <router_channel> -t 1 -l 1
    - - P SSC1 C +MESHSET:PARENT,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. dut1 set parent be router
    3. start dut1 and check it connected with router
    4. start dut2 and check it connected with dut1    
  test environment: SSC_T2_MESH1
  summary: set dut1 parent as router with mesh_id, dut2 without set_parent, check dut2 connected with dut1
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'Yes'
- ID: MESH_EST_2002
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -U -o 0 -s <router_ssid> -p <router_password> -b <router_bssid> -n
      <router_channel> -t 1 -l 1
    - - P SSC1 C +MESHSET:PARENT,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. set dut1 parent to router without mesh_id
    3. start dut1 and check it connected with router
    4. start dut2 and check it connected with dut1    
  test environment: SSC_T2_MESH1
  summary: set dut1 parent to router without mesh_id, dut2 without set_parent, check dut2 connected with dut1
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'Yes'
- ID: MESH_EST_2003
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 meshset -U -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -b <router_bssid> -n
      <router_channel> -t 1 -l 1
    - - P SSC1 C +MESHSET:PARENT,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - DELAY 10
    - - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. set dut1 parent to router
    3. start dut2 and check it connected with router
    4. start dut1 and check it connected with router    
  test environment: SSC_T2_MESH1
  summary: set dut1 parent to router, start dut1 with amother root already exists
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'Yes'
- ID: MESH_EST_2004
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 ap -Q
    - - R SSC1 A <meshap_ssid>:\+APCONFIG:(\w+),
  - - SSC SSC2 meshset -U -o 0 -m <mesh_id> -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
    - - P SSC2 C +MESHSET:PARENT,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. set dut2 parent to dut1
    3. start dut1 and check it connected with router
    4. start dut2 and check it connected with dut1    
  test environment: SSC_T2_MESH1
  summary: set dut2 parent to dut1(root), start dut2 after dut1 connected
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'Yes'
- ID: MESH_EST_2005
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 ap -Q
    - - R SSC1 A <meshap_ssid>:\+APCONFIG:(\w+),
  - - SSC SSC2 meshset -U -o 0 -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
    - - P SSC2 C +MESHSET:PARENT,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. set dut2 parent to dut1 without mesh_id
    3. start dut1 and check it connected with router
    4. start dut2 and check it connected with dut1    
  test environment: SSC_T2_MESH1
  summary: set dut2 parent to dut1(root) without mesh_id, start dut2 after dut1 connected
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'Yes'
- ID: MESH_EST_2006
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] mesh -I
    - - P SSC[1-3] C +MESH:INIT,OK
  - - SSC SSC[1-3] meshset -G -o 0 -m [<mesh_id>,<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-3] C +MESHSET:CFG,OK
  - - SSC SSC[1,3] mesh -T
    - - P SSC[1,3] C +MESH:START,OK
      - P SSC[1,3] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  - - SSC SSC3 ap -Q
    - - R SSC3 A <meshap_ssid>:\+APCONFIG:(\w+),
  - - SSC SSC2 meshset -U -o 0 -m <mesh_id2> -s <meshap_ssid> -p <map_password> -n <router_channel> -t 2 -l 2
    - - P SSC2 C +MESHSET:PARENT,OK C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_DISCONNECTED
      - P SSC3 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed
    5. succeed    
  steps: |-
    1. mesh init/config
    2. dut1,dut3 start mesh with different mesh id
    3. dut2 connect to dut1 first
    4. set dut2's parent to dut3
    5. check dut2 leave dut1 and join dut3    
  test environment: SSC_T3_MESH1
  summary: set one node's parent to another mesh network
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'No'
- ID: MESH_EST_2007
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 op -S -o 2
    - - P SSC2 C +MODE:OK
  - - SSC SSC2 ap -S -s <target_ssid> -n <router_channel>
    - - P SSC2 C +SAP:OK
  - - SSC SSC1 meshset -U -o 0 -s <target_ssid> -n <router_channel> -t 1 -l 1
    - - P SSC1 C +MESHSET:PARENT,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
      - P SSC2 C +SOFTAP:STACONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. mesh init/config
    2. dut1 start mesh and establish network
    3. set dut2 softAP mode
    4. set dut1's parent to dut2    
  test environment: SSC_T2_MESH1
  summary: set ont node's parent to another Router after connected
  test point 1: manual network function
  test point 2: set parent test
  CI ready: 'No'
#- ID: MESH_EST_2008
#  <<: *MESH_CASE
#  cmd set:
#  - ''
#  - - SSC SSC[1-2] mesh -I
#    - - P SSC[1-2] C +MESH:INIT,OK
#  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <temp_string> -n <router_channel> -t <max_connect> -i <ie_encrypt>
#    - - P SSC[1-2] C +MESHSET:CFG,OK
#  - - SSC SSC1 meshset -U -o 0 -s <temp_string> -n <router_channel> -t 1 -l 1
#    - - P SSC1 C +MESHSET:PARENT,OK
#  - - SSC SSC[1-2] mesh -T
#    - - P SSC[1-2] C +MESH:START,OK
#      - P SSC2 C MESH_EVENT_CONNECTED,2
#      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
#  expected result: |-
#    1. succeed
#    2. succeed
#    3. succeed
#    4. succeed
#  steps: |-
#    1. mesh init/config
#    2. dut1 set parent to inexist router
#    3. start mesh
#    4. check dut2 connected with dut1
#  test environment: SSC_T2_MESH1
#  summary: set one node's parent to inexist router and establish network
#  test point 1: manual network function
#  test point 2: set parent test
#  CI ready: 'Yes'
- ID: MESH_EST_2101
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 0 -t 1
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - SSC SSC1 mesh -Q -o 2
    - - P SSC1 C IS_ROOT
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init/config dut1 no-router and set type root
    2. mesh start
    3. check dut1 is root    
  test environment: SSC_T1_MESH1
  summary: dut1 set type root, start mesh without router
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2102
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 0 -t 1
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 mesh -Q -o 2
    - - P SSC1 C IS_ROOT
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init/config dut1 set type root
    2. mesh start
    3. check dut1 connected with router and type root    
  test environment: SSC_T1_MESH1
  summary: dut1 set type root, set router and start mesh
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2103
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 0 -t 1
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC2 meshset -X -o 0 -i 1
    - - P SSC2 C +MESHSET:FIX_ROOT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init/config all duts no-router, set dut1 root
    2. mesh start all duts
    3. check mesh tree established and stably    
  test environment: SSC_T2_MESH1
  summary: dut1 set type root, dut2 fix root, establish mesh network without router
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2104
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 0 -t 1
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init/config all duts no-router, set dut1 root
    2. mesh start all duts
    3. check mesh tree established and stably    
  test environment: SSC_T2_MESH1
  summary: dut1 set type root without router, dut2 set router without set type, establish mesh network
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'No'
- ID: MESH_EST_2105
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -t 1
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 2 5
    - - ''
  - - SSC SSC1 mesh -I -o 1
    - - P SSC1 C +MESH:DEINIT,OK
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 1
    - - P SSC1 C +MESHGET:TYPE,OK,0
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - DELAY 5
    - - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK C MESH_EVENT_CONNECTED,2
      - P SSC2 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. start one dut with root leaf
    2. check mesh type cleared after re-init mesh
    3. start mesh and let this dut be layer2    
  test environment: SSC_T2_MESH1
  summary: check mesh root type info cleared after mesh re-init
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2106
  <<: *MESH_CASE
  cmd set:
  - ''
  - *mesh_init_all_duts
  - *mesh_config_all_duts_no_router
  - *mesh_start_all_duts
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. mesh init/config all duts no-router, set dut1 root
    2. mesh start all duts
    3. check mesh tree established and stably    
  test environment: SSC_T50_MESH1
  summary: multiple nodes, establish mesh network without router
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2107
  <<: *MESH_CASE
  cmd set:
  - ''
  - *mesh_init_all_duts
  - *mesh_config_all_duts_no_router
  - *mesh_start_all_duts
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - SSC SSC1 reboot
    - - P SSC1 C !!!ready!!!
      - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
  - - DELAY 50
    - - P SSC[2-<node_num>] C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh no-router network
    2. root reboot
    3. check others can't connected    
  test environment: SSC_T50_MESH1
  summary: multiple nodes, establish mesh network without router, then root reboot
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'No'
- ID: MESH_EST_2108
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 0 -t 1
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC2 meshset -X -o 0 -i 1
    - - P SSC2 C +MESHSET:FIX_ROOT,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - MSSC SSC[1-2] meshset -A -n <scan_times> -t <vote_time> -l 15 -i <monitor_ie>
    - - P SSC[1-2] C +MESHSET:ATTEMPTS,OK
  - - SSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
  - - SSC SSC1 mesh -I -o 1
    - - P SSC1 C +MESH:DEINIT,OK
      - P SSC2 C MESH_EVENT_DISCONNECTED
  - - DELAY 40
    - - P SSC2 C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh no-router network
    2. root deinit
    3. check layer2 no parent found    
  test environment: SSC_T2_MESH1
  summary: no-router, root deinit and check layer2 no parent found
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'No'
- ID: MESH_EST_2109
  <<: *MESH_CASE
  cmd set:
  - ''
  - *mesh_init_all_duts
  - *mesh_config_all_duts_no_router
  - - MSSC SSC[1-<node_num>] meshset -A -n <scan_times> -t <vote_time> -l 15 -i <monitor_ie>
    - - P SSC[1-<node_num>] C +MESHSET:ATTEMPTS,OK
  - *mesh_start_all_duts
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - SSC SSC1 mesh -I -o 1
    - - P SSC1 C +MESH:DEINIT,OK
      - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
  - - DELAY 60
    - - P MNODE(0,0) C MESH_EVENT_NO_PARENT_FOUND
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh no-router network
    2. root deinit
    3. check others can't connected    
  test environment: SSC_T6_MESH1
  summary: multiple nodes, establish mesh network without router, then root deinit
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'No'
- ID: MESH_EST_2110
  <<: *MESH_CASE
  cmd set:
  - ''
  - *mesh_init_all_duts
  - *mesh_config_all_duts_no_router
  - *mesh_start_all_duts
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - FREBOOT SSC1
    - - P SSC1 C !!!ready!!!
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - *mesh_config_dut1_no_router
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh no-router network
    2. root restart mesh
    3. check mesh tree re-establish    
  test environment: SSC_T50_MESH1
  summary: multiple nodes, establish mesh network without router, then root restart root and check mesh network re-establish
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2111
  <<: *MESH_CASE
  cmd set:
  - ''
  - *mesh_init_all_duts
  - *mesh_config_all_duts_no_router
  - *mesh_start_all_duts
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - SSC MNODE(0,0) reboot
    - - P MNODE(0,0) C !!!ready!!!
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>-1
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. establish mesh no-router network
    2. one of the l2 nodes reboot
    3. check mesh tree re-establish    
  test environment: SSC_T50_MESH1
  summary: multiple nodes, establish mesh network without router, then reboot one of the l2 nodes
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'No'
- ID: MESH_EST_2112
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-3] mesh -I
    - - P SSC[1-3] C +MESH:INIT,OK
  - - SSC SSC[1-2] meshset -T -o 0 -t 1
    - - P SSC[1-2] C +MESHSET:TYPE,OK
  - - SSC SSC3 meshset -X -o 0 -i 1
    - - P SSC3 C +MESHSET:FIX_ROOT,OK
  - - SSC SSC[1-3] meshset -G -o 0 -m <mesh_id> -n <router_channel> -t <max_connect> -e
        <map_password> -i <ie_encrypt>
    - - P SSC[1-3] C +MESHSET:CFG,OK
  - - SSC SSC[2-3] mesh -T
    - - P SSC[2-3] C +MESH:START,OK
      - P SSC3 C MESH_EVENT_CONNECTED,2
  - - SSC SSC2 mesh -I -o 1
    - - P SSC2 C +MESH:DEINIT,OK
      - P SSC3 C MESH_EVENT_DISCONNECTED
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
      - P SSC3 C MESH_EVENT_CONNECTED,2
      - P SSC1 C MESH_EVENT_CHILD_CONNECTED
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. all duts set no-router, dut1 and dut2 is root, dut3 fix root
    2. start dut2 and dut3 establish network
    3. deinit dut2 and start dut1, dut3 disconencted with dut2 then connect to dut1    
  test environment: SSC_T3_MESH1
  summary: set two no-router root, check node switch between two root
  test point 1: manual network function
  test point 2: no-router function test
  CI ready: 'Yes'
- ID: MESH_EST_2201
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -t 3
    - - P SSC1 C +MESHSET:TYPE,OK
  - - MSSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - MSSC SSC1 meshset -o 0 -L -l <max_layer>
    - - P SSC1 C +MESHSET:MLAYER,OK
  - - MSSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_NO_PARENT_FOUND
  - - SSC SSC1 op -Q
    - - P SSC1 C +CURMODE:1
  - - LOOP 3 2 "[0,1,2]" "[0,1,2]"
    - ''
  - - SSC SSC1 sleep -S -t {%d}
    - - P SSC1 C +SLEEP_MODE:OK
  - - SSC SSC1 sleep -Q
    - - P SSC1 C +CURMODE:{%d}
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. start one dut with mesh type leaf
    2. check not connect to Router
    3. check station mode
    4. check nonsleep/light/modem sleep mode setable    
  test environment: SSC_T1_MESH1
  summary: start dut1 as leaf, check disconnected, station mode, and sleep mode setable
  test point 1: manual network function
  test point 2: standalone station test
  CI ready: 'Yes'
- ID: MESH_EST_2202
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -t 3
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC[1-2] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] meshset -o 0 -L -l <max_layer>
    - - P SSC[1-2] C +MESHSET:MLAYER,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 15
    - - ''
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - DELAY 5
    - - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
      - P SSC1 C MESH_EVENT_CONNECTED,2
  - - SSC SSC1 op -Q
    - - P SSC1 C +CURMODE:1
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. first start one dut with mesh type leaf
    2. then start the normal node
    3. check if networking established
    4. check wifo op mode station    
  test environment: SSC_T2_MESH1
  summary: dut1 start mesh with type leaf, dut2 normal node, establish network
  test point 1: manual network function
  test point 2: standalone station test
  CI ready: 'Yes'
- ID: MESH_EST_2203
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -t 3
    - - P SSC1 C +MESHSET:TYPE,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 3 10
    - - ''
  - - SSC SSC1 mesh -I -o 1
    - - P SSC1 C +MESH:DEINIT,OK
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -T -o 1
    - - P SSC1 C +MESHGET:TYPE,OK,0
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 5
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. start one dut with type leaf
    2. check mesh type cleared after re-init mesh
    3. start mesh and connected with Router    
  test environment: SSC_T1_MESH1
  summary: check mesh leaf type info cleared after mesh re-init
  test point 1: manual network function
  test point 2: standalone station test
  CI ready: 'Yes'
- ID: MESH_EST_2204
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-5] meshset -T -t 3
    - - P SSC[1-5] C +MESHSET:TYPE,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] meshset -o 0 -L -l <max_layer>
    - - P SSC[1-<node_num>] C +MESHSET:MLAYER,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - MSSC SSC[1-5] meshset -T -o 1
    - - P SSC[1-5] C +MESHGET:TYPE,OK,3
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. several duts set type leaf
    2. all duts start mesh together
    3. check if networking established
    4. check leaf type nodes    
  test environment: SSC_T50_MESH1
  summary: several duts set type leaf, all duts start mesh together
  test point 1: manual network function
  test point 2: standalone station test
  CI ready: 'No'
- ID: MESH_EST_2301
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) meshset -D -m <mesh_id2>
    - - P MNODE(0,0) C MESHSET:MESH_ID,OK
      - P MNODE(0,0) C MESH_EVENT_DISCONNECTED
  - - DELAY 10
    - - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed    
  steps: |-
    1. dynamic set mesh id    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh id, check disconnected with parent
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
  #TODO: v3.1 will not run dynamic cases on CI
- ID: MESH_EST_2302
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0) meshset -D -m <mesh_id2>
    - - P MNODE(0) C MESHSET:MESH_ID,OK
      - P MNODE(0) C MESH_EVENT_CHILD_DISCONNECTED
  expected result: |-
    1. succeed    
  steps: |-
    1. root dynamic set mesh id    
  initial condition: MESH_INIT1
  test environment: SSC_T2_MESH1
  summary: root dynamic set mesh id, check child leave
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2303
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC MNODE(0,0) meshset -D -m <mesh_id2>
    - - P MNODE(0,0) C MESHSET:MESH_ID,OK
      - P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
  - - DELAY 15
    - - ''
  - - SSC MNODE(0,0) mesh -Q -o 2
    - - P MNODE(0,0) C IS_ROOT
  expected result: |-
    1. succeed    
  steps: |-
    1. layer2 dynamic set mesh id    
  initial condition: MESH_INIT1
  test environment: SSC_T6_MESH1
  summary: layer2 dynamic set mesh id, check disconnected and child leave
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2304
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -i 0
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - SSC MNODE(0,0) meshset -D -m <mesh_id2>
    - - P MNODE(0,0) C MESHSET:MESH_ID,OK
      - P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
  - - DELAY 10
    - - P MNODE(0,0) C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  expected result: |-
    1. succeed    
  steps: |-
    1. root dynamic set mesh id    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T6_MESH1
  summary: layer2 dynamic set mesh id  without ie_encrypt, check disconnected and child leave
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2305
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - MSSC SSC[1-2] meshset -G -o 0 -m [<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - MSSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - MSSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - SSC SSC1 meshset -D -m <mesh_id2>
    - - P SSC1 C MESHSET:MESH_ID,OK
      - P SSC1 C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed    
  steps: |-
    1. layer2 dynamic set mesh id    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh id on disconnected node, check connected
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2306
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - MSSC SSC[1-2] meshset -G -o 0 -m [<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - MSSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 meshset -D -m <mesh_id2>
    - - P SSC1 C MESHSET:MESH_ID,OK
  - - MSSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed    
  steps: |-
    1. layer2 dynamic set mesh id    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh id on root, check new node join
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2307
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - MSSC SSC[1-2] meshset -G -o 0 -m [<mesh_id>,<mesh_id2>] -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - MSSC SSC[1-2] mesh -T
    - - P SSC[1-2] C +MESH:START,OK
  - - DELAY 10
    - - P SSC[1-2] C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC1 meshset -D -m <mesh_id2>
    - - P SSC1 C MESHSET:MESH_ID,OK
    - - P SSC1 C MESH_EVENT_DISCONNECTED
  - - DELAY 5
      - P SSC1 C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. set 2 duts with different mesh_id, both root
    2. dynamic set mesh id on dut1
    3. dut1 disconnected with router and join the other network    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh id on root, check disconnected and join new network
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2308
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 0
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - SSC MNODE(0,0) meshset -E -i 1 -e <map_password> -l 10
    - - P MNODE(0,0) C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
      - P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
  - - DELAY 15
    - - ''
  - - SSC MNODE(0,0) mesh -Q -o 2
    - - P MNODE(0,0) C IS_ROOT
  expected result: |-
    1. succeed    
  steps: |-
    1. all duts establish mesh neetwork with ie_encrypt = 0
    2. layer 2 dynamic set mesh ie encrypt
    3. check layer2 disconnected with parent and then become root    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T6_MESH1
  summary: dynamic set mesh ie encrypt, check disconnected and child leave
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'No'
- ID: MESH_EST_2309
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-<node_num>] mesh -I
    - - P SSC[1-<node_num>] C +MESH:INIT,OK
  - - MSSC SSC[1-<node_num>] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 1
    - - P SSC[1-<node_num>] C +MESHSET:CFG,OK
  - - MSSC SSC[1-<node_num>] mesh -T
    - - P SSC[1-<node_num>] C +MESH:START,OK
  - - DELAY <delay_time>
    - - ''
  - - VALUE <tree_node_num> <node_num>
    - - R PC_COM L OK
  - *mesh_check_tree_num
  - *mesh_tree_stably
  - - SSC MNODE(0,0) meshset -E -i 1 -e <temp_string> -l 10
    - - P MNODE(0,0) C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
      - P MNODE(0,0) C MESH_EVENT_CHILD_DISCONNECTED C MESH_EVENT_DISCONNECTED
  - - DELAY 15
    - - ''
  - - SSC MNODE(0,0) mesh -Q -o 2
    - - P MNODE(0,0) C IS_ROOT
  expected result: |-
    1. succeed    
  steps: |-
    1. all duts establish mesh neetwork with ie_encrypt = 1
    2. layer 2 dynamic set mesh ie encrypt key
    3. check layer2 disconnected with parent and then become root    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T6_MESH1
  summary: dynamic set mesh ie key, check disconnected and child leave
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2310
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - MSSC SSC[1-2] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i [0,1]
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - SSC SSC2 meshset -E -i 0 -e <map_password> -l 10
    - - P SSC2 C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. dut1 set ie_encrypt=0 and dut2 set ie encrypt=1
    2. start dut1 to be root first
    3. start dut2 and dynamic set mesh ie encrypt=0
    4. check dut2 connected with dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh ie encrypt to 0, check connected
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2311
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - MSSC SSC[1-2] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i [1,0]
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - SSC SSC2 meshset -E -i 1 -e <map_password> -l 10
    - - P SSC2 C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed
    2. succeed
    3. succeed
    4. succeed    
  steps: |-
    1. dut1 set ie_encrypt=1 and dut2 set ie encrypt=0
    2. start dut1 to be root first
    3. start dut2 and dynamic set mesh ie encrypt=1
    4. check dut2 connected with dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh ie encrypt to 1, check connected
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2312
  <<: *MESH_CASE
  cmd set:
  - ''
  - - MSSC SSC[1-2] mesh -I
    - - P SSC[1-2] C +MESH:INIT,OK
  - - MSSC SSC[1-2] meshset -G -o 0 -m <mesh_id2> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i 0
    - - P SSC[1-2] C +MESHSET:CFG,OK
  - - SSC SSC[1-2] meshset -E -i 1 -e [<map_password>,<temp_string>] -l 10
    - - P SSC[1-2] C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 10
    - - P SSC1 C MESH_EVENT_CONNECTED,1 C MESH_EVENT_ROOT_GOT_IP
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
  - - SSC SSC2 meshset -E -i 1 -e <map_password> -l 10
    - - P SSC2 C MESHSET:MIE_FUNC,OK C MESHSET:MIE_KEY,OK
      - P SSC2 C MESH_EVENT_CONNECTED,2
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. 2 duts config mesh with different ie_encrypt key
    2. dut2 dynamic set mesh ie encrypt key after start
    3. check dut2 connected with dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: dynamic set mesh ie key, check connected
  test point 1: manual network function
  test point 2: dynamic set configuration
  CI ready: 'Yes'
- ID: MESH_EST_2401
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 mesh -I
    - - P SSC1 C +MESH:INIT,OK
  - - SSC SSC1 meshset -G -o 0 -m <mesh_id> -s <router_ssid> -p <router_password> -n
      <router_channel> -b <router_bssid> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC1 C +MESHSET:CFG,OK
  - - SSC SSC1 mesh -T
    - - P SSC1 C +MESH:START,OK
  - - DELAY 1 2
    - - ''
  - - SSC SSC1 meshset -O -o 0 -n 0 -t 0
    - - P SSC1 C +MESHSET:SELF_ORG,OK
  - - SSC SSC1 sta -S -T
    - - P SSC1 C MESH_EVENT_SCAN_DONE
  expected result: |-
    1. succeed
    2. succeed    
  steps: |-
    1. dut1 start mesh then set self_organized(0,0)
    2. wifi scan
    2. check MESH_EVENT_SCAN_DONE on dut1    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T1_MESH1
  summary: set self_organized (0,0) and user scan after mesh start
  test point 1: manual network function
  test point 2: self_organized
  CI ready: 'Yes'
- ID: MESH_EST_2402
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1
  - - SSC SSC1 reboot
    - - P SSC1 C !!!ready!!!
      - P SSC2 C MESH_EVENT_DISCONNECTE
  - - SSC SSC2 meshset -O -o 0 -n 0 -t 0
    - - P SSC2 C +MESHSET:SELF_ORG,OK
  - - DELAY 1
    - - P SSC2 C MESH_EVENT_STOP_RECONNECTION
  - - SSC SSC2 sta -S -T
    - - P SSC2 C MESH_EVENT_SCAN_DONE
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. dut1 set AP, dut2 start mesh and connected with dut1
    2. reboot dut1, dut2 disconnected with dut1
    3. set self_organized(0,0) and then use scan (stop scan first)    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: set self_organized (0,0) when root connecting to router
  test point 1: manual network function
  test point 2: self_organized
  CI ready: 'Yes'
  # TODO: discussion
- ID: MESH_EST_2403
  <<: *MESH_CASE
  cmd set:
  - ''
  - - SSC SSC1 op -S -o 2
    - - P SSC1 C +MODE:OK
  - - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -n <router_channel> -t <target_auth_enum>
    - - R SSC1 C +SAP:OK
  - - SSC SSC2 mesh -I
    - - P SSC2 C +MESH:INIT,OK
  - - SSC SSC2 meshset -G -o 0 -m <mesh_id> -s <target_ssid> -p <target_password> -n
      <router_channel> -t <max_connect> -e <map_password> -i <ie_encrypt>
    - - P SSC2 C +MESHSET:CFG,OK
  - - SSC SSC2 mesh -T
    - - P SSC2 C +MESH:START,OK
      - P SSC2 C MESH_EVENT_CONNECTED,1
  - - SSC SSC1 reboot
    - - P SSC1 C !!!ready!!!
      - P SSC2 C MESH_EVENT_DISCONNECTE
  - - SSC SSC2 meshset -O -o 0 -n 1 -t 1
    - - P SSC2 C +MESHSET:SELF_ORG,OK
  - - SSC SSC2 meshset -T -o 1
    - - P SSC2 C MESHGET:TYPE,OK,0
  expected result: |-
    1. succeed
    2. succeed
    3. succeed    
  steps: |-
    1. dut1 set AP, dut2 start mesh and connected with dut1
    2. reboot dut1, dut2 disconnected with dut1
    3. set dut2 self_organized(1,1) and check it IDLE    
  initial condition: MESH_DEINIT_STA
  test environment: SSC_T2_MESH1
  summary: set self_organized (1,1) to give up root state
  test point 1: manual network function
  test point 2: self_organized
  CI ready: 'Yes'
- ID: MESH_EST_6001
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network    
  summary: performance test, start all nodes to establish network
  test point 1: performance
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6002
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'ie_encrypt = False'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network without mesh ie encrypted    
  summary: performance test, start all nodes to establish network without mesh ie encrypted
  test point 1: performance
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6003
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'map_encrypt = False'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network without mesh ap encrypted    
  summary: performance test, start all nodes to establish network without mesh ap encrypted
  test point 1: performance
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6004
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'map_encrypt = False'
    - ['']
  - - 'ie_encrypt = False'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network without map/mie encrypted    
  summary: performance test, start all nodes to establish network without map/mie encrypted
  test point 1: performance
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6005
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'default_switch_rssi = True'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network without default switch rssi    
  summary: performance test, start all nodes to establish network with default switch rssi
  test point 1: performance
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6101
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = ["MNODE(0)"]'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, destroy root after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6102
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = ["MNODE(l2)"]'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, destroy L2 nodes after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6103
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = ["MNODE(l1-l2)"]'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, destroy root and L2 nodes after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6104
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "RANDOM(10)"'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, destroy random 10 nodes after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6105
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "MNODE(0)"'
    - ['']
  - - 'restart_mesh = True'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, root restart mesh after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6106
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "MNODE(0)"'
    - ['']
  - - 'destroy_mode = "power"'
    - ['']
  - - 'restart_mesh = True'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, power reset root and restart mesh after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_6107
  <<: *MESH_CASE
  category: Performance
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "RANDOM(10)"'
    - ['']
  - - 'destroy_mode = "power"'
    - ['']
  - - 'restart_mesh = True'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: performance test, power reset random nodes and restart mesh after network established
  test point 1: performance
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1

- ID: MESH_EST_5001
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'start_number_list = [1,0]'
    - ['']
  - - 'start_interval_sec = 15'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network without map/mie encrypted    
  summary: stress test, start one nodes to be root first, then start all others
  test point 1: stress
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5002
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'start_number_list = [1,0]'
    - ['']
  - - 'start_interval_sec = random.uniform(1,10)'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent    
  steps: |-
    1. enable all nodes establish    
  summary: stress test, start one nodes first, then start others
  test point 1: stress
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5003
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'start_number_list = [1,1,1,1,1,1,1,1,1,1,0]'
    - ['']
  - - 'start_interval_sec = random.uniform(1,5)'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent    
  steps: |-
    1. enable all nodes establish network    
  summary: stress test, start 10 nodes one by one, then start others
  test point 1: stress
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5004
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'start_number_list = [1,2,3,4,8,0]'
    - ['']
  - - 'start_interval_sec = random.uniform(1,5)'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent on mesh network establish    
  steps: |-
    1. enable all nodes establish network    
  summary: stress test, start [1,2,3,4,8] nodes with interval , then start others
  test point 1: stress
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5005
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'allow_roots = False'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent    
  steps: |-
    1. enable all nodes establish    
  summary: stress test, start all nodes with allow_roots false
  test point 1: stress
  test point 2: mesh network establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5101
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "MNODE(0)"'
    - ['']
  - - 'establish_fail_time = 1200'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: stress test, destroy root after network established
  test point 1: stress
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5102
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "MNODE(0)"'
    - ['']
  - - 'establish_fail_time = 1200'
    - ['']
  - - 'destroy_mode = "power"'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: stress test, power reset root after network established
  test point 1: stress
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5103
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "MNODE(0)"'
    - ['']
  - - 'establish_fail_time = 1200'
    - ['']
  - - 'destroy_mode = "power"'
    - ['']
  - - 'restart_mesh = True'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy root after network established    
  summary: stress test, power reset root and restart mesh after network established
  test point 1: stress
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5104
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "RANDOM(10)"'
    - ['']
  - - 'destroy_mode = "power"'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. power reset 10 nodes after network established    
  summary: stress test, power reset 10 nodes after network established
  test point 1: stress
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5105
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "RANDOM(10)"'
    - ['']
  - - 'destroy_mode = "power"'
    - ['']
  - - 'restart_mesh = True'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. power reset random 10 nodes and restart after network established    
  summary: stress test, power reset random 10 nodes and restart after network established
  test point 1: stress
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5106
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshNetworkDestroy
  - - 'destroy_nodes = "RANDOM(10)"'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_INIT_SWITCH
  steps: |-
    1. enable all nodes establish network
    2. reboot random 10 nodes after network established    
  summary: multiple router, reboot random 10 nodes after network established
  test point 1: stress
  test point 2: channel switch test
  test environment: SSC_T50_MESH1
- ID: MESH_EST_5107
  <<: *MESH_CASE
  category: Stress
  cmd set:
  - MeshStress/MeshEstablishTime
  - *est_performance_cmd_set
  - - 'destroy_nodes = "RANDOM(10)"'
    - ['']
  execution time: 2.0
  expected result: |-
    1. check the time spent
    1. check the time spent    
  initial condition: MESH_DEINIT_STA
  steps: |-
    1. enable all nodes establish network
    2. destroy random 10 nodes after network established    
  summary: stress test, destroy random 10 nodes after network established
  test point 1: stress
  test point 2: mesh network re-establish
  test environment: SSC_T50_MESH1