alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
53dd9f0a31
esp-idf/components/esp_system/test_apps/rtc_power_modes
History
Marius Vikhammer f8f93d936e ulp-riscv: add support for using ADC as well as an example show-casing it.
2022-08-09 09:21:15 +08:00
..
main ulp-riscv: add support for using ADC as well as an example show-casing it. 2022-08-09 09:21:15 +08:00
CMakeLists.txt test_rtc: add test_app to test power consumption 2022-06-06 00:51:38 +08:00
README.md ulp-riscv: add support for using ADC as well as an example show-casing it. 2022-08-09 09:21:15 +08:00
sdkconfig.defaults test_rtc: add test_app to test power consumption 2022-06-06 00:51:38 +08:00

README.md

Supported Targets ESP32-S3

RTC power test

This test app is to enter 7 different sub power modes we have, so that the power consumption under different power modes can be measured.

Currently there are 6 sub power modes, 3 for deepsleep and 3 for lightsleep. Show as below (priority from high to low).

Deepsleep

  1. Mode for ADC/Temp Sensor in monitor mode (ULP). To enable this mode, call esp_sleep_enable_adc_tsens_monitor.
  2. Default mode.
  3. Ultra low power mode. To enable this mode, call rtc_sleep_enable_ultra_low. Note if mode 1 has higher priority than this.

Lightsleep

  1. Mode for using 40 MHz XTAL in lightsleep. To enable this mode, call esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL, ESP_PD_OPTION_ON).
  2. Mode for using 8M clock by digital system (peripherals). To enable this mode, initialize LEDC with 8M clock source.
  3. Mode for ADC/Temp Sensor in monitor mode (ULP). To enable this mdoe, call esp_sleep_enable_adc_tsens_monitor.
  4. Default mode.