mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
66fb5a29bb
Apply the pre-commit hook whitespace fixes to all files in the repo. (Line endings, blank lines at end of file, trailing whitespace)
2297 lines
106 KiB
C
2297 lines
106 KiB
C
// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_RTC_IO_REG_H_
|
|
#define _SOC_RTC_IO_REG_H_
|
|
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
#include "soc.h"
|
|
#define RTC_GPIO_OUT_REG (DR_REG_RTCIO_BASE + 0x0)
|
|
/* RTC_GPIO_OUT_DATA : R/W ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 output data*/
|
|
#define RTC_GPIO_OUT_DATA 0x003FFFFF
|
|
#define RTC_GPIO_OUT_DATA_M ((RTC_GPIO_OUT_DATA_V)<<(RTC_GPIO_OUT_DATA_S))
|
|
#define RTC_GPIO_OUT_DATA_V 0x3FFFFF
|
|
#define RTC_GPIO_OUT_DATA_S 10
|
|
|
|
#define RTC_GPIO_OUT_W1TS_REG (DR_REG_RTCIO_BASE + 0x4)
|
|
/* RTC_GPIO_OUT_DATA_W1TS : WO ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 output data write 1 to set*/
|
|
#define RTC_GPIO_OUT_DATA_W1TS 0x003FFFFF
|
|
#define RTC_GPIO_OUT_DATA_W1TS_M ((RTC_GPIO_OUT_DATA_W1TS_V)<<(RTC_GPIO_OUT_DATA_W1TS_S))
|
|
#define RTC_GPIO_OUT_DATA_W1TS_V 0x3FFFFF
|
|
#define RTC_GPIO_OUT_DATA_W1TS_S 10
|
|
|
|
#define RTC_GPIO_OUT_W1TC_REG (DR_REG_RTCIO_BASE + 0x8)
|
|
/* RTC_GPIO_OUT_DATA_W1TC : WO ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 output data write 1 to clear*/
|
|
#define RTC_GPIO_OUT_DATA_W1TC 0x003FFFFF
|
|
#define RTC_GPIO_OUT_DATA_W1TC_M ((RTC_GPIO_OUT_DATA_W1TC_V)<<(RTC_GPIO_OUT_DATA_W1TC_S))
|
|
#define RTC_GPIO_OUT_DATA_W1TC_V 0x3FFFFF
|
|
#define RTC_GPIO_OUT_DATA_W1TC_S 10
|
|
|
|
#define RTC_GPIO_ENABLE_REG (DR_REG_RTCIO_BASE + 0xC)
|
|
/* RTC_GPIO_ENABLE : R/W ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 enable*/
|
|
#define RTC_GPIO_ENABLE 0x003FFFFF
|
|
#define RTC_GPIO_ENABLE_M ((RTC_GPIO_ENABLE_V)<<(RTC_GPIO_ENABLE_S))
|
|
#define RTC_GPIO_ENABLE_V 0x3FFFFF
|
|
#define RTC_GPIO_ENABLE_S 10
|
|
|
|
#define RTC_GPIO_ENABLE_W1TS_REG (DR_REG_RTCIO_BASE + 0x10)
|
|
/* RTC_GPIO_ENABLE_W1TS : WO ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 enable write 1 to set*/
|
|
#define RTC_GPIO_ENABLE_W1TS 0x003FFFFF
|
|
#define RTC_GPIO_ENABLE_W1TS_M ((RTC_GPIO_ENABLE_W1TS_V)<<(RTC_GPIO_ENABLE_W1TS_S))
|
|
#define RTC_GPIO_ENABLE_W1TS_V 0x3FFFFF
|
|
#define RTC_GPIO_ENABLE_W1TS_S 10
|
|
|
|
#define RTC_GPIO_ENABLE_W1TC_REG (DR_REG_RTCIO_BASE + 0x14)
|
|
/* RTC_GPIO_ENABLE_W1TC : WO ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 enable write 1 to clear*/
|
|
#define RTC_GPIO_ENABLE_W1TC 0x003FFFFF
|
|
#define RTC_GPIO_ENABLE_W1TC_M ((RTC_GPIO_ENABLE_W1TC_V)<<(RTC_GPIO_ENABLE_W1TC_S))
|
|
#define RTC_GPIO_ENABLE_W1TC_V 0x3FFFFF
|
|
#define RTC_GPIO_ENABLE_W1TC_S 10
|
|
|
|
#define RTC_GPIO_STATUS_REG (DR_REG_RTCIO_BASE + 0x18)
|
|
/* RTC_GPIO_STATUS_INT : R/W ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 interrupt status*/
|
|
#define RTC_GPIO_STATUS_INT 0x003FFFFF
|
|
#define RTC_GPIO_STATUS_INT_M ((RTC_GPIO_STATUS_INT_V)<<(RTC_GPIO_STATUS_INT_S))
|
|
#define RTC_GPIO_STATUS_INT_V 0x3FFFFF
|
|
#define RTC_GPIO_STATUS_INT_S 10
|
|
|
|
#define RTC_GPIO_STATUS_W1TS_REG (DR_REG_RTCIO_BASE + 0x1C)
|
|
/* RTC_GPIO_STATUS_INT_W1TS : WO ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 interrupt status write 1 to set*/
|
|
#define RTC_GPIO_STATUS_INT_W1TS 0x003FFFFF
|
|
#define RTC_GPIO_STATUS_INT_W1TS_M ((RTC_GPIO_STATUS_INT_W1TS_V)<<(RTC_GPIO_STATUS_INT_W1TS_S))
|
|
#define RTC_GPIO_STATUS_INT_W1TS_V 0x3FFFFF
|
|
#define RTC_GPIO_STATUS_INT_W1TS_S 10
|
|
|
|
#define RTC_GPIO_STATUS_W1TC_REG (DR_REG_RTCIO_BASE + 0x20)
|
|
/* RTC_GPIO_STATUS_INT_W1TC : WO ;bitpos:[31:10] ;default: 0 ; */
|
|
/*description: RTC GPIO 0 ~ 21 interrupt status write 1 to clear*/
|
|
#define RTC_GPIO_STATUS_INT_W1TC 0x003FFFFF
|
|
#define RTC_GPIO_STATUS_INT_W1TC_M ((RTC_GPIO_STATUS_INT_W1TC_V)<<(RTC_GPIO_STATUS_INT_W1TC_S))
|
|
#define RTC_GPIO_STATUS_INT_W1TC_V 0x3FFFFF
|
|
#define RTC_GPIO_STATUS_INT_W1TC_S 10
|
|
|
|
#define RTC_GPIO_IN_REG (DR_REG_RTCIO_BASE + 0x24)
|
|
/* RTC_GPIO_IN_NEXT : RO ;bitpos:[31:10] ;default: ; */
|
|
/*description: RTC GPIO input data*/
|
|
#define RTC_GPIO_IN_NEXT 0x003FFFFF
|
|
#define RTC_GPIO_IN_NEXT_M ((RTC_GPIO_IN_NEXT_V)<<(RTC_GPIO_IN_NEXT_S))
|
|
#define RTC_GPIO_IN_NEXT_V 0x3FFFFF
|
|
#define RTC_GPIO_IN_NEXT_S 10
|
|
|
|
#define RTC_GPIO_PIN0_REG (DR_REG_RTCIO_BASE + 0x28)
|
|
/* RTC_GPIO_PIN0_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN0_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN0_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN0_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN0_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN0_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN0_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN0_INT_TYPE_M ((RTC_GPIO_PIN0_INT_TYPE_V)<<(RTC_GPIO_PIN0_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN0_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN0_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN0_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN0_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN0_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN0_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN0_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN1_REG (DR_REG_RTCIO_BASE + 0x2C)
|
|
/* RTC_GPIO_PIN1_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN1_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN1_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN1_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN1_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN1_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN1_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN1_INT_TYPE_M ((RTC_GPIO_PIN1_INT_TYPE_V)<<(RTC_GPIO_PIN1_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN1_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN1_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN1_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN1_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN1_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN1_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN1_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN2_REG (DR_REG_RTCIO_BASE + 0x30)
|
|
/* RTC_GPIO_PIN2_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN2_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN2_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN2_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN2_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN2_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN2_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN2_INT_TYPE_M ((RTC_GPIO_PIN2_INT_TYPE_V)<<(RTC_GPIO_PIN2_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN2_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN2_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN2_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN2_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN2_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN2_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN2_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN3_REG (DR_REG_RTCIO_BASE + 0x34)
|
|
/* RTC_GPIO_PIN3_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN3_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN3_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN3_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN3_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN3_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN3_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN3_INT_TYPE_M ((RTC_GPIO_PIN3_INT_TYPE_V)<<(RTC_GPIO_PIN3_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN3_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN3_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN3_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN3_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN3_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN3_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN3_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN4_REG (DR_REG_RTCIO_BASE + 0x38)
|
|
/* RTC_GPIO_PIN4_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN4_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN4_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN4_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN4_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN4_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN4_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN4_INT_TYPE_M ((RTC_GPIO_PIN4_INT_TYPE_V)<<(RTC_GPIO_PIN4_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN4_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN4_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN4_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN4_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN4_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN4_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN4_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN5_REG (DR_REG_RTCIO_BASE + 0x3C)
|
|
/* RTC_GPIO_PIN5_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN5_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN5_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN5_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN5_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN5_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN5_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN5_INT_TYPE_M ((RTC_GPIO_PIN5_INT_TYPE_V)<<(RTC_GPIO_PIN5_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN5_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN5_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN5_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN5_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN5_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN5_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN5_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN6_REG (DR_REG_RTCIO_BASE + 0x40)
|
|
/* RTC_GPIO_PIN6_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN6_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN6_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN6_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN6_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN6_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN6_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN6_INT_TYPE_M ((RTC_GPIO_PIN6_INT_TYPE_V)<<(RTC_GPIO_PIN6_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN6_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN6_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN6_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN6_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN6_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN6_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN6_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN7_REG (DR_REG_RTCIO_BASE + 0x44)
|
|
/* RTC_GPIO_PIN7_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN7_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN7_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN7_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN7_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN7_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN7_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN7_INT_TYPE_M ((RTC_GPIO_PIN7_INT_TYPE_V)<<(RTC_GPIO_PIN7_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN7_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN7_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN7_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN7_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN7_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN7_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN7_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN8_REG (DR_REG_RTCIO_BASE + 0x48)
|
|
/* RTC_GPIO_PIN8_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN8_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN8_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN8_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN8_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN8_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN8_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN8_INT_TYPE_M ((RTC_GPIO_PIN8_INT_TYPE_V)<<(RTC_GPIO_PIN8_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN8_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN8_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN8_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN8_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN8_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN8_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN8_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN9_REG (DR_REG_RTCIO_BASE + 0x4C)
|
|
/* RTC_GPIO_PIN9_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN9_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN9_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN9_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN9_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN9_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN9_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN9_INT_TYPE_M ((RTC_GPIO_PIN9_INT_TYPE_V)<<(RTC_GPIO_PIN9_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN9_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN9_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN9_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN9_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN9_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN9_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN9_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN10_REG (DR_REG_RTCIO_BASE + 0x50)
|
|
/* RTC_GPIO_PIN10_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN10_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN10_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN10_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN10_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN10_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN10_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN10_INT_TYPE_M ((RTC_GPIO_PIN10_INT_TYPE_V)<<(RTC_GPIO_PIN10_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN10_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN10_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN10_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN10_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN10_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN10_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN10_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN11_REG (DR_REG_RTCIO_BASE + 0x54)
|
|
/* RTC_GPIO_PIN11_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN11_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN11_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN11_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN11_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN11_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN11_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN11_INT_TYPE_M ((RTC_GPIO_PIN11_INT_TYPE_V)<<(RTC_GPIO_PIN11_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN11_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN11_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN11_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN11_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN11_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN11_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN11_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN12_REG (DR_REG_RTCIO_BASE + 0x58)
|
|
/* RTC_GPIO_PIN12_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN12_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN12_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN12_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN12_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN12_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN12_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN12_INT_TYPE_M ((RTC_GPIO_PIN12_INT_TYPE_V)<<(RTC_GPIO_PIN12_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN12_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN12_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN12_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN12_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN12_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN12_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN12_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN13_REG (DR_REG_RTCIO_BASE + 0x5C)
|
|
/* RTC_GPIO_PIN13_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN13_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN13_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN13_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN13_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN13_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN13_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN13_INT_TYPE_M ((RTC_GPIO_PIN13_INT_TYPE_V)<<(RTC_GPIO_PIN13_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN13_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN13_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN13_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN13_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN13_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN13_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN13_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN14_REG (DR_REG_RTCIO_BASE + 0x60)
|
|
/* RTC_GPIO_PIN14_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN14_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN14_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN14_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN14_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN14_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN14_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN14_INT_TYPE_M ((RTC_GPIO_PIN14_INT_TYPE_V)<<(RTC_GPIO_PIN14_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN14_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN14_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN14_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN14_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN14_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN14_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN14_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN15_REG (DR_REG_RTCIO_BASE + 0x64)
|
|
/* RTC_GPIO_PIN15_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN15_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN15_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN15_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN15_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN15_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN15_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN15_INT_TYPE_M ((RTC_GPIO_PIN15_INT_TYPE_V)<<(RTC_GPIO_PIN15_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN15_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN15_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN15_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN15_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN15_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN15_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN15_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN16_REG (DR_REG_RTCIO_BASE + 0x68)
|
|
/* RTC_GPIO_PIN16_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN16_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN16_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN16_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN16_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN16_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN16_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN16_INT_TYPE_M ((RTC_GPIO_PIN16_INT_TYPE_V)<<(RTC_GPIO_PIN16_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN16_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN16_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN16_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN16_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN16_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN16_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN16_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN17_REG (DR_REG_RTCIO_BASE + 0x6C)
|
|
/* RTC_GPIO_PIN17_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN17_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN17_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN17_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN17_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN17_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN17_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN17_INT_TYPE_M ((RTC_GPIO_PIN17_INT_TYPE_V)<<(RTC_GPIO_PIN17_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN17_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN17_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN17_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN17_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN17_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN17_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN17_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN18_REG (DR_REG_RTCIO_BASE + 0x70)
|
|
/* RTC_GPIO_PIN18_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN18_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN18_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN18_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN18_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN18_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN18_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN18_INT_TYPE_M ((RTC_GPIO_PIN18_INT_TYPE_V)<<(RTC_GPIO_PIN18_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN18_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN18_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN18_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN18_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN18_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN18_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN18_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN19_REG (DR_REG_RTCIO_BASE + 0x74)
|
|
/* RTC_GPIO_PIN19_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN19_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN19_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN19_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN19_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN19_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN19_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN19_INT_TYPE_M ((RTC_GPIO_PIN19_INT_TYPE_V)<<(RTC_GPIO_PIN19_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN19_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN19_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN19_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN19_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN19_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN19_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN19_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN20_REG (DR_REG_RTCIO_BASE + 0x78)
|
|
/* RTC_GPIO_PIN20_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN20_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN20_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN20_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN20_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN20_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN20_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN20_INT_TYPE_M ((RTC_GPIO_PIN20_INT_TYPE_V)<<(RTC_GPIO_PIN20_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN20_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN20_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN20_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN20_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN20_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN20_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN20_PAD_DRIVER_S 2
|
|
|
|
#define RTC_GPIO_PIN21_REG (DR_REG_RTCIO_BASE + 0x7C)
|
|
/* RTC_GPIO_PIN21_WAKEUP_ENABLE : R/W ;bitpos:[10] ;default: 0 ; */
|
|
/*description: RTC GPIO wakeup enable bit*/
|
|
#define RTC_GPIO_PIN21_WAKEUP_ENABLE (BIT(10))
|
|
#define RTC_GPIO_PIN21_WAKEUP_ENABLE_M (BIT(10))
|
|
#define RTC_GPIO_PIN21_WAKEUP_ENABLE_V 0x1
|
|
#define RTC_GPIO_PIN21_WAKEUP_ENABLE_S 10
|
|
/* RTC_GPIO_PIN21_INT_TYPE : R/W ;bitpos:[9:7] ;default: 0 ; */
|
|
/*description: if set to 0: GPIO interrupt disable if set to 1: rising edge
|
|
trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
|
|
#define RTC_GPIO_PIN21_INT_TYPE 0x00000007
|
|
#define RTC_GPIO_PIN21_INT_TYPE_M ((RTC_GPIO_PIN21_INT_TYPE_V)<<(RTC_GPIO_PIN21_INT_TYPE_S))
|
|
#define RTC_GPIO_PIN21_INT_TYPE_V 0x7
|
|
#define RTC_GPIO_PIN21_INT_TYPE_S 7
|
|
/* RTC_GPIO_PIN21_PAD_DRIVER : R/W ;bitpos:[2] ;default: 0 ; */
|
|
/*description: if set to 0: normal output if set to 1: open drain*/
|
|
#define RTC_GPIO_PIN21_PAD_DRIVER (BIT(2))
|
|
#define RTC_GPIO_PIN21_PAD_DRIVER_M (BIT(2))
|
|
#define RTC_GPIO_PIN21_PAD_DRIVER_V 0x1
|
|
#define RTC_GPIO_PIN21_PAD_DRIVER_S 2
|
|
|
|
#define RTC_IO_RTC_DEBUG_SEL_REG (DR_REG_RTCIO_BASE + 0x80)
|
|
/* RTC_IO_DEBUG_12M_NO_GATING : R/W ;bitpos:[25] ;default: 1'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_DEBUG_12M_NO_GATING (BIT(25))
|
|
#define RTC_IO_DEBUG_12M_NO_GATING_M (BIT(25))
|
|
#define RTC_IO_DEBUG_12M_NO_GATING_V 0x1
|
|
#define RTC_IO_DEBUG_12M_NO_GATING_S 25
|
|
/* RTC_IO_DEBUG_SEL4 : R/W ;bitpos:[24:20] ;default: 5'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_DEBUG_SEL4 0x0000001F
|
|
#define RTC_IO_DEBUG_SEL4_M ((RTC_IO_DEBUG_SEL4_V)<<(RTC_IO_DEBUG_SEL4_S))
|
|
#define RTC_IO_DEBUG_SEL4_V 0x1F
|
|
#define RTC_IO_DEBUG_SEL4_S 20
|
|
/* RTC_IO_DEBUG_SEL3 : R/W ;bitpos:[19:15] ;default: 5'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_DEBUG_SEL3 0x0000001F
|
|
#define RTC_IO_DEBUG_SEL3_M ((RTC_IO_DEBUG_SEL3_V)<<(RTC_IO_DEBUG_SEL3_S))
|
|
#define RTC_IO_DEBUG_SEL3_V 0x1F
|
|
#define RTC_IO_DEBUG_SEL3_S 15
|
|
/* RTC_IO_DEBUG_SEL2 : R/W ;bitpos:[14:10] ;default: 5'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_DEBUG_SEL2 0x0000001F
|
|
#define RTC_IO_DEBUG_SEL2_M ((RTC_IO_DEBUG_SEL2_V)<<(RTC_IO_DEBUG_SEL2_S))
|
|
#define RTC_IO_DEBUG_SEL2_V 0x1F
|
|
#define RTC_IO_DEBUG_SEL2_S 10
|
|
/* RTC_IO_DEBUG_SEL1 : R/W ;bitpos:[9:5] ;default: 5'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_DEBUG_SEL1 0x0000001F
|
|
#define RTC_IO_DEBUG_SEL1_M ((RTC_IO_DEBUG_SEL1_V)<<(RTC_IO_DEBUG_SEL1_S))
|
|
#define RTC_IO_DEBUG_SEL1_V 0x1F
|
|
#define RTC_IO_DEBUG_SEL1_S 5
|
|
/* RTC_IO_DEBUG_SEL0 : R/W ;bitpos:[4:0] ;default: 5'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_DEBUG_SEL0 0x0000001F
|
|
#define RTC_IO_DEBUG_SEL0_M ((RTC_IO_DEBUG_SEL0_V)<<(RTC_IO_DEBUG_SEL0_S))
|
|
#define RTC_IO_DEBUG_SEL0_V 0x1F
|
|
#define RTC_IO_DEBUG_SEL0_S 0
|
|
|
|
#define RTC_IO_TOUCH_PAD0_REG (DR_REG_RTCIO_BASE + 0x84)
|
|
/* RTC_IO_TOUCH_PAD0_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD0_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD0_DRV_M ((RTC_IO_TOUCH_PAD0_DRV_V)<<(RTC_IO_TOUCH_PAD0_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD0_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD0_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD0_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD0_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD0_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD0_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD0_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD0_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD0_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD0_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD0_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD0_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD0_DAC_M ((RTC_IO_TOUCH_PAD0_DAC_V)<<(RTC_IO_TOUCH_PAD0_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD0_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD0_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD0_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD0_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD0_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD0_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_START_S 22
|
|
/* RTC_IO_TOUCH_PAD0_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD0_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD0_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD0_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD0_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD0_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD0_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD0_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD0_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD0_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD0_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD0_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD0_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD0_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD0_FUN_SEL_M ((RTC_IO_TOUCH_PAD0_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD0_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD0_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD0_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD0_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD0_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD0_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD0_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD0_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD0_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD0_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD0_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD0_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD0_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD0_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD0_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD0_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD0_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD0_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD0_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD0_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD1_REG (DR_REG_RTCIO_BASE + 0x88)
|
|
/* RTC_IO_TOUCH_PAD1_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD1_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD1_DRV_M ((RTC_IO_TOUCH_PAD1_DRV_V)<<(RTC_IO_TOUCH_PAD1_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD1_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD1_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD1_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD1_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD1_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD1_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD1_RUE : R/W ;bitpos:[27] ;default: 1'd1 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD1_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD1_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD1_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD1_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD1_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD1_DAC_M ((RTC_IO_TOUCH_PAD1_DAC_V)<<(RTC_IO_TOUCH_PAD1_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD1_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD1_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD1_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD1_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD1_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD1_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_START_S 22
|
|
/* RTC_IO_TOUCH_PAD1_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD1_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD1_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD1_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD1_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD1_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD1_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD1_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD1_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD1_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD1_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD1_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD1_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD1_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD1_FUN_SEL_M ((RTC_IO_TOUCH_PAD1_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD1_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD1_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD1_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD1_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD1_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD1_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD1_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD1_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD1_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD1_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD1_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD1_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD1_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD1_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD1_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD1_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD1_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD1_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD1_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD1_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD2_REG (DR_REG_RTCIO_BASE + 0x8C)
|
|
/* RTC_IO_TOUCH_PAD2_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD2_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD2_DRV_M ((RTC_IO_TOUCH_PAD2_DRV_V)<<(RTC_IO_TOUCH_PAD2_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD2_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD2_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD2_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD2_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD2_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD2_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD2_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD2_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD2_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD2_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD2_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD2_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD2_DAC_M ((RTC_IO_TOUCH_PAD2_DAC_V)<<(RTC_IO_TOUCH_PAD2_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD2_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD2_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD2_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD2_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD2_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD2_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_START_S 22
|
|
/* RTC_IO_TOUCH_PAD2_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD2_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD2_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD2_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD2_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD2_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD2_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD2_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD2_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD2_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD2_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD2_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD2_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD2_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD2_FUN_SEL_M ((RTC_IO_TOUCH_PAD2_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD2_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD2_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD2_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD2_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD2_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD2_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD2_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD2_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD2_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD2_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD2_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD2_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD2_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD2_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD2_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD2_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD2_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD2_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD2_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD2_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD3_REG (DR_REG_RTCIO_BASE + 0x90)
|
|
/* RTC_IO_TOUCH_PAD3_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD3_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD3_DRV_M ((RTC_IO_TOUCH_PAD3_DRV_V)<<(RTC_IO_TOUCH_PAD3_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD3_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD3_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD3_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD3_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD3_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD3_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD3_RUE : R/W ;bitpos:[27] ;default: 1'd1 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD3_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD3_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD3_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD3_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD3_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD3_DAC_M ((RTC_IO_TOUCH_PAD3_DAC_V)<<(RTC_IO_TOUCH_PAD3_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD3_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD3_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD3_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD3_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD3_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD3_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_START_S 22
|
|
/* RTC_IO_TOUCH_PAD3_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD3_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD3_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD3_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD3_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD3_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD3_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD3_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD3_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD3_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD3_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD3_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD3_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD3_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD3_FUN_SEL_M ((RTC_IO_TOUCH_PAD3_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD3_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD3_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD3_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD3_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD3_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD3_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD3_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD3_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD3_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD3_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD3_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD3_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD3_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD3_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD3_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD3_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD3_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD3_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD3_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD3_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD4_REG (DR_REG_RTCIO_BASE + 0x94)
|
|
/* RTC_IO_TOUCH_PAD4_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD4_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD4_DRV_M ((RTC_IO_TOUCH_PAD4_DRV_V)<<(RTC_IO_TOUCH_PAD4_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD4_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD4_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD4_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD4_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD4_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD4_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD4_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD4_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD4_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD4_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD4_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD4_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD4_DAC_M ((RTC_IO_TOUCH_PAD4_DAC_V)<<(RTC_IO_TOUCH_PAD4_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD4_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD4_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD4_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD4_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD4_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD4_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_START_S 22
|
|
/* RTC_IO_TOUCH_PAD4_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD4_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD4_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD4_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD4_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD4_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD4_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD4_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD4_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD4_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD4_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD4_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD4_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD4_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD4_FUN_SEL_M ((RTC_IO_TOUCH_PAD4_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD4_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD4_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD4_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD4_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD4_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD4_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD4_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD4_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD4_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD4_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD4_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD4_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD4_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD4_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD4_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD4_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD4_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD4_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD4_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD4_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD5_REG (DR_REG_RTCIO_BASE + 0x98)
|
|
/* RTC_IO_TOUCH_PAD5_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD5_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD5_DRV_M ((RTC_IO_TOUCH_PAD5_DRV_V)<<(RTC_IO_TOUCH_PAD5_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD5_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD5_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD5_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD5_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD5_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD5_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD5_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD5_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD5_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD5_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD5_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD5_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD5_DAC_M ((RTC_IO_TOUCH_PAD5_DAC_V)<<(RTC_IO_TOUCH_PAD5_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD5_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD5_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD5_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD5_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD5_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD5_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_START_S 22
|
|
/* RTC_IO_TOUCH_PAD5_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD5_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD5_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD5_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD5_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD5_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD5_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD5_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD5_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD5_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD5_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD5_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD5_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD5_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD5_FUN_SEL_M ((RTC_IO_TOUCH_PAD5_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD5_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD5_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD5_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD5_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD5_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD5_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD5_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD5_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD5_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD5_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD5_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD5_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD5_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD5_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD5_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD5_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD5_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD5_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD5_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD5_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD6_REG (DR_REG_RTCIO_BASE + 0x9C)
|
|
/* RTC_IO_TOUCH_PAD6_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD6_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD6_DRV_M ((RTC_IO_TOUCH_PAD6_DRV_V)<<(RTC_IO_TOUCH_PAD6_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD6_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD6_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD6_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD6_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD6_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD6_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD6_RUE : R/W ;bitpos:[27] ;default: 1'd1 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD6_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD6_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD6_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD6_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD6_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD6_DAC_M ((RTC_IO_TOUCH_PAD6_DAC_V)<<(RTC_IO_TOUCH_PAD6_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD6_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD6_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD6_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD6_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD6_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD6_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_START_S 22
|
|
/* RTC_IO_TOUCH_PAD6_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD6_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD6_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD6_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD6_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD6_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD6_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD6_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD6_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD6_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD6_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD6_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD6_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD6_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD6_FUN_SEL_M ((RTC_IO_TOUCH_PAD6_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD6_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD6_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD6_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD6_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD6_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD6_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD6_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD6_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD6_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD6_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD6_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD6_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD6_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD6_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD6_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD6_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD6_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD6_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD6_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD6_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD7_REG (DR_REG_RTCIO_BASE + 0xA0)
|
|
/* RTC_IO_TOUCH_PAD7_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD7_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD7_DRV_M ((RTC_IO_TOUCH_PAD7_DRV_V)<<(RTC_IO_TOUCH_PAD7_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD7_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD7_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD7_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD7_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD7_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD7_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD7_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD7_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD7_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD7_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD7_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD7_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD7_DAC_M ((RTC_IO_TOUCH_PAD7_DAC_V)<<(RTC_IO_TOUCH_PAD7_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD7_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD7_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD7_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD7_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD7_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD7_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_START_S 22
|
|
/* RTC_IO_TOUCH_PAD7_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD7_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD7_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD7_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD7_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD7_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD7_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD7_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD7_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD7_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD7_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD7_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD7_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD7_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD7_FUN_SEL_M ((RTC_IO_TOUCH_PAD7_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD7_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD7_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD7_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD7_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD7_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD7_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD7_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD7_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD7_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD7_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD7_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD7_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD7_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD7_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD7_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD7_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD7_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD7_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD7_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD7_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD8_REG (DR_REG_RTCIO_BASE + 0xA4)
|
|
/* RTC_IO_TOUCH_PAD8_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD8_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD8_DRV_M ((RTC_IO_TOUCH_PAD8_DRV_V)<<(RTC_IO_TOUCH_PAD8_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD8_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD8_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD8_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD8_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD8_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD8_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD8_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD8_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD8_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD8_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD8_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD8_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD8_DAC_M ((RTC_IO_TOUCH_PAD8_DAC_V)<<(RTC_IO_TOUCH_PAD8_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD8_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD8_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD8_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD8_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD8_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD8_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_START_S 22
|
|
/* RTC_IO_TOUCH_PAD8_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD8_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD8_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD8_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD8_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD8_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD8_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD8_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD8_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD8_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD8_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD8_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD8_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD8_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD8_FUN_SEL_M ((RTC_IO_TOUCH_PAD8_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD8_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD8_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD8_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD8_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD8_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD8_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD8_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD8_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD8_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD8_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD8_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD8_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD8_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD8_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD8_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD8_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD8_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD8_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD8_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD8_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD9_REG (DR_REG_RTCIO_BASE + 0xA8)
|
|
/* RTC_IO_TOUCH_PAD9_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD9_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD9_DRV_M ((RTC_IO_TOUCH_PAD9_DRV_V)<<(RTC_IO_TOUCH_PAD9_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD9_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD9_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD9_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD9_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD9_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD9_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD9_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD9_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD9_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD9_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD9_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD9_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD9_DAC_M ((RTC_IO_TOUCH_PAD9_DAC_V)<<(RTC_IO_TOUCH_PAD9_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD9_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD9_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD9_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD9_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD9_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD9_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_START_S 22
|
|
/* RTC_IO_TOUCH_PAD9_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD9_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD9_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD9_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD9_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD9_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD9_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD9_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD9_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD9_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD9_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD9_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD9_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD9_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD9_FUN_SEL_M ((RTC_IO_TOUCH_PAD9_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD9_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD9_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD9_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD9_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD9_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD9_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD9_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD9_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD9_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD9_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD9_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD9_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD9_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD9_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD9_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD9_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD9_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD9_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD9_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD9_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD10_REG (DR_REG_RTCIO_BASE + 0xAC)
|
|
/* RTC_IO_TOUCH_PAD10_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD10_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD10_DRV_M ((RTC_IO_TOUCH_PAD10_DRV_V)<<(RTC_IO_TOUCH_PAD10_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD10_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD10_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD10_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD10_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD10_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD10_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD10_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD10_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD10_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD10_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD10_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD10_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD10_DAC_M ((RTC_IO_TOUCH_PAD10_DAC_V)<<(RTC_IO_TOUCH_PAD10_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD10_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD10_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD10_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD10_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD10_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD10_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_START_S 22
|
|
/* RTC_IO_TOUCH_PAD10_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD10_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD10_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD10_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD10_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD10_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD10_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD10_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD10_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD10_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD10_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD10_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD10_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD10_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD10_FUN_SEL_M ((RTC_IO_TOUCH_PAD10_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD10_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD10_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD10_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD10_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD10_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD10_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD10_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD10_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD10_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD10_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD10_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD10_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD10_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD10_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD10_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD10_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD10_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD10_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD10_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD10_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD11_REG (DR_REG_RTCIO_BASE + 0xB0)
|
|
/* RTC_IO_TOUCH_PAD11_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD11_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD11_DRV_M ((RTC_IO_TOUCH_PAD11_DRV_V)<<(RTC_IO_TOUCH_PAD11_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD11_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD11_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD11_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD11_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD11_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD11_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD11_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD11_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD11_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD11_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD11_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD11_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD11_DAC_M ((RTC_IO_TOUCH_PAD11_DAC_V)<<(RTC_IO_TOUCH_PAD11_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD11_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD11_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD11_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD11_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD11_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD11_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_START_S 22
|
|
/* RTC_IO_TOUCH_PAD11_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD11_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD11_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD11_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD11_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD11_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD11_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD11_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD11_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD11_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD11_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD11_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD11_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD11_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD11_FUN_SEL_M ((RTC_IO_TOUCH_PAD11_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD11_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD11_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD11_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD11_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD11_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD11_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD11_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD11_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD11_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD11_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD11_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD11_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD11_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD11_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD11_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD11_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD11_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD11_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD11_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD11_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD12_REG (DR_REG_RTCIO_BASE + 0xB4)
|
|
/* RTC_IO_TOUCH_PAD12_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD12_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD12_DRV_M ((RTC_IO_TOUCH_PAD12_DRV_V)<<(RTC_IO_TOUCH_PAD12_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD12_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD12_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD12_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD12_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD12_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD12_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD12_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD12_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD12_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD12_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD12_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD12_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD12_DAC_M ((RTC_IO_TOUCH_PAD12_DAC_V)<<(RTC_IO_TOUCH_PAD12_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD12_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD12_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD12_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD12_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD12_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD12_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_START_S 22
|
|
/* RTC_IO_TOUCH_PAD12_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD12_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD12_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD12_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD12_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD12_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD12_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD12_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD12_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD12_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD12_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD12_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD12_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD12_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD12_FUN_SEL_M ((RTC_IO_TOUCH_PAD12_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD12_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD12_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD12_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD12_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD12_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD12_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD12_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD12_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD12_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD12_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD12_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD12_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD12_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD12_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD12_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD12_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD12_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD12_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD12_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD12_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD13_REG (DR_REG_RTCIO_BASE + 0xB8)
|
|
/* RTC_IO_TOUCH_PAD13_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD13_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD13_DRV_M ((RTC_IO_TOUCH_PAD13_DRV_V)<<(RTC_IO_TOUCH_PAD13_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD13_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD13_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD13_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD13_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD13_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD13_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD13_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD13_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD13_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD13_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD13_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD13_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD13_DAC_M ((RTC_IO_TOUCH_PAD13_DAC_V)<<(RTC_IO_TOUCH_PAD13_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD13_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD13_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD13_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD13_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD13_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD13_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_START_S 22
|
|
/* RTC_IO_TOUCH_PAD13_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD13_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD13_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD13_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD13_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD13_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD13_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD13_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD13_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD13_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD13_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD13_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD13_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD13_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD13_FUN_SEL_M ((RTC_IO_TOUCH_PAD13_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD13_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD13_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD13_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD13_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD13_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD13_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD13_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD13_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD13_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD13_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD13_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD13_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD13_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD13_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD13_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD13_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD13_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD13_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD13_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD13_FUN_IE_S 13
|
|
|
|
#define RTC_IO_TOUCH_PAD14_REG (DR_REG_RTCIO_BASE + 0xBC)
|
|
/* RTC_IO_TOUCH_PAD14_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_TOUCH_PAD14_DRV 0x00000003
|
|
#define RTC_IO_TOUCH_PAD14_DRV_M ((RTC_IO_TOUCH_PAD14_DRV_V)<<(RTC_IO_TOUCH_PAD14_DRV_S))
|
|
#define RTC_IO_TOUCH_PAD14_DRV_V 0x3
|
|
#define RTC_IO_TOUCH_PAD14_DRV_S 29
|
|
/* RTC_IO_TOUCH_PAD14_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_TOUCH_PAD14_RDE (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD14_RDE_M (BIT(28))
|
|
#define RTC_IO_TOUCH_PAD14_RDE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_RDE_S 28
|
|
/* RTC_IO_TOUCH_PAD14_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_TOUCH_PAD14_RUE (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD14_RUE_M (BIT(27))
|
|
#define RTC_IO_TOUCH_PAD14_RUE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_RUE_S 27
|
|
/* RTC_IO_TOUCH_PAD14_DAC : R/W ;bitpos:[25:23] ;default: 3'h4 ; */
|
|
/*description: TOUCH_DAC*/
|
|
#define RTC_IO_TOUCH_PAD14_DAC 0x00000007
|
|
#define RTC_IO_TOUCH_PAD14_DAC_M ((RTC_IO_TOUCH_PAD14_DAC_V)<<(RTC_IO_TOUCH_PAD14_DAC_S))
|
|
#define RTC_IO_TOUCH_PAD14_DAC_V 0x7
|
|
#define RTC_IO_TOUCH_PAD14_DAC_S 23
|
|
/* RTC_IO_TOUCH_PAD14_START : R/W ;bitpos:[22] ;default: 1'd0 ; */
|
|
/*description: TOUCH_START*/
|
|
#define RTC_IO_TOUCH_PAD14_START (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD14_START_M (BIT(22))
|
|
#define RTC_IO_TOUCH_PAD14_START_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_START_S 22
|
|
/* RTC_IO_TOUCH_PAD14_TIE_OPT : R/W ;bitpos:[21] ;default: 1'd0 ; */
|
|
/*description: TOUCH_TIE_OPT*/
|
|
#define RTC_IO_TOUCH_PAD14_TIE_OPT (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD14_TIE_OPT_M (BIT(21))
|
|
#define RTC_IO_TOUCH_PAD14_TIE_OPT_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_TIE_OPT_S 21
|
|
/* RTC_IO_TOUCH_PAD14_XPD : R/W ;bitpos:[20] ;default: 1'd0 ; */
|
|
/*description: TOUCH_XPD*/
|
|
#define RTC_IO_TOUCH_PAD14_XPD (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD14_XPD_M (BIT(20))
|
|
#define RTC_IO_TOUCH_PAD14_XPD_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_XPD_S 20
|
|
/* RTC_IO_TOUCH_PAD14_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_TOUCH_PAD14_MUX_SEL (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD14_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_TOUCH_PAD14_MUX_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_MUX_SEL_S 19
|
|
/* RTC_IO_TOUCH_PAD14_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_TOUCH_PAD14_FUN_SEL 0x00000003
|
|
#define RTC_IO_TOUCH_PAD14_FUN_SEL_M ((RTC_IO_TOUCH_PAD14_FUN_SEL_V)<<(RTC_IO_TOUCH_PAD14_FUN_SEL_S))
|
|
#define RTC_IO_TOUCH_PAD14_FUN_SEL_V 0x3
|
|
#define RTC_IO_TOUCH_PAD14_FUN_SEL_S 17
|
|
/* RTC_IO_TOUCH_PAD14_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD14_SLP_SEL (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD14_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_TOUCH_PAD14_SLP_SEL_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_SLP_SEL_S 16
|
|
/* RTC_IO_TOUCH_PAD14_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD14_SLP_IE (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD14_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_TOUCH_PAD14_SLP_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_SLP_IE_S 15
|
|
/* RTC_IO_TOUCH_PAD14_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_TOUCH_PAD14_SLP_OE (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD14_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_TOUCH_PAD14_SLP_OE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_SLP_OE_S 14
|
|
/* RTC_IO_TOUCH_PAD14_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_TOUCH_PAD14_FUN_IE (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD14_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_TOUCH_PAD14_FUN_IE_V 0x1
|
|
#define RTC_IO_TOUCH_PAD14_FUN_IE_S 13
|
|
|
|
#define RTC_IO_XTAL_32P_PAD_REG (DR_REG_RTCIO_BASE + 0xC0)
|
|
/* RTC_IO_X32P_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_X32P_DRV 0x00000003
|
|
#define RTC_IO_X32P_DRV_M ((RTC_IO_X32P_DRV_V)<<(RTC_IO_X32P_DRV_S))
|
|
#define RTC_IO_X32P_DRV_V 0x3
|
|
#define RTC_IO_X32P_DRV_S 29
|
|
/* RTC_IO_X32P_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_X32P_RDE (BIT(28))
|
|
#define RTC_IO_X32P_RDE_M (BIT(28))
|
|
#define RTC_IO_X32P_RDE_V 0x1
|
|
#define RTC_IO_X32P_RDE_S 28
|
|
/* RTC_IO_X32P_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_X32P_RUE (BIT(27))
|
|
#define RTC_IO_X32P_RUE_M (BIT(27))
|
|
#define RTC_IO_X32P_RUE_V 0x1
|
|
#define RTC_IO_X32P_RUE_S 27
|
|
/* RTC_IO_X32P_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_X32P_MUX_SEL (BIT(19))
|
|
#define RTC_IO_X32P_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_X32P_MUX_SEL_V 0x1
|
|
#define RTC_IO_X32P_MUX_SEL_S 19
|
|
/* RTC_IO_X32P_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_X32P_FUN_SEL 0x00000003
|
|
#define RTC_IO_X32P_FUN_SEL_M ((RTC_IO_X32P_FUN_SEL_V)<<(RTC_IO_X32P_FUN_SEL_S))
|
|
#define RTC_IO_X32P_FUN_SEL_V 0x3
|
|
#define RTC_IO_X32P_FUN_SEL_S 17
|
|
/* RTC_IO_X32P_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_X32P_SLP_SEL (BIT(16))
|
|
#define RTC_IO_X32P_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_X32P_SLP_SEL_V 0x1
|
|
#define RTC_IO_X32P_SLP_SEL_S 16
|
|
/* RTC_IO_X32P_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_X32P_SLP_IE (BIT(15))
|
|
#define RTC_IO_X32P_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_X32P_SLP_IE_V 0x1
|
|
#define RTC_IO_X32P_SLP_IE_S 15
|
|
/* RTC_IO_X32P_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_X32P_SLP_OE (BIT(14))
|
|
#define RTC_IO_X32P_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_X32P_SLP_OE_V 0x1
|
|
#define RTC_IO_X32P_SLP_OE_S 14
|
|
/* RTC_IO_X32P_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_X32P_FUN_IE (BIT(13))
|
|
#define RTC_IO_X32P_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_X32P_FUN_IE_V 0x1
|
|
#define RTC_IO_X32P_FUN_IE_S 13
|
|
|
|
#define RTC_IO_XTAL_32N_PAD_REG (DR_REG_RTCIO_BASE + 0xC4)
|
|
/* RTC_IO_X32N_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_X32N_DRV 0x00000003
|
|
#define RTC_IO_X32N_DRV_M ((RTC_IO_X32N_DRV_V)<<(RTC_IO_X32N_DRV_S))
|
|
#define RTC_IO_X32N_DRV_V 0x3
|
|
#define RTC_IO_X32N_DRV_S 29
|
|
/* RTC_IO_X32N_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_X32N_RDE (BIT(28))
|
|
#define RTC_IO_X32N_RDE_M (BIT(28))
|
|
#define RTC_IO_X32N_RDE_V 0x1
|
|
#define RTC_IO_X32N_RDE_S 28
|
|
/* RTC_IO_X32N_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_X32N_RUE (BIT(27))
|
|
#define RTC_IO_X32N_RUE_M (BIT(27))
|
|
#define RTC_IO_X32N_RUE_V 0x1
|
|
#define RTC_IO_X32N_RUE_S 27
|
|
/* RTC_IO_X32N_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_X32N_MUX_SEL (BIT(19))
|
|
#define RTC_IO_X32N_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_X32N_MUX_SEL_V 0x1
|
|
#define RTC_IO_X32N_MUX_SEL_S 19
|
|
/* RTC_IO_X32N_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_X32N_FUN_SEL 0x00000003
|
|
#define RTC_IO_X32N_FUN_SEL_M ((RTC_IO_X32N_FUN_SEL_V)<<(RTC_IO_X32N_FUN_SEL_S))
|
|
#define RTC_IO_X32N_FUN_SEL_V 0x3
|
|
#define RTC_IO_X32N_FUN_SEL_S 17
|
|
/* RTC_IO_X32N_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_X32N_SLP_SEL (BIT(16))
|
|
#define RTC_IO_X32N_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_X32N_SLP_SEL_V 0x1
|
|
#define RTC_IO_X32N_SLP_SEL_S 16
|
|
/* RTC_IO_X32N_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_X32N_SLP_IE (BIT(15))
|
|
#define RTC_IO_X32N_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_X32N_SLP_IE_V 0x1
|
|
#define RTC_IO_X32N_SLP_IE_S 15
|
|
/* RTC_IO_X32N_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_X32N_SLP_OE (BIT(14))
|
|
#define RTC_IO_X32N_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_X32N_SLP_OE_V 0x1
|
|
#define RTC_IO_X32N_SLP_OE_S 14
|
|
/* RTC_IO_X32N_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_X32N_FUN_IE (BIT(13))
|
|
#define RTC_IO_X32N_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_X32N_FUN_IE_V 0x1
|
|
#define RTC_IO_X32N_FUN_IE_S 13
|
|
|
|
#define RTC_IO_PAD_DAC1_REG (DR_REG_RTCIO_BASE + 0xC8)
|
|
/* RTC_IO_PDAC1_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: PDAC1_DRV*/
|
|
#define RTC_IO_PDAC1_DRV 0x00000003
|
|
#define RTC_IO_PDAC1_DRV_M ((RTC_IO_PDAC1_DRV_V)<<(RTC_IO_PDAC1_DRV_S))
|
|
#define RTC_IO_PDAC1_DRV_V 0x3
|
|
#define RTC_IO_PDAC1_DRV_S 29
|
|
/* RTC_IO_PDAC1_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: PDAC1_RDE*/
|
|
#define RTC_IO_PDAC1_RDE (BIT(28))
|
|
#define RTC_IO_PDAC1_RDE_M (BIT(28))
|
|
#define RTC_IO_PDAC1_RDE_V 0x1
|
|
#define RTC_IO_PDAC1_RDE_S 28
|
|
/* RTC_IO_PDAC1_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: PDAC1_RUE*/
|
|
#define RTC_IO_PDAC1_RUE (BIT(27))
|
|
#define RTC_IO_PDAC1_RUE_M (BIT(27))
|
|
#define RTC_IO_PDAC1_RUE_V 0x1
|
|
#define RTC_IO_PDAC1_RUE_S 27
|
|
/* RTC_IO_PDAC1_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_PDAC1_MUX_SEL (BIT(19))
|
|
#define RTC_IO_PDAC1_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_PDAC1_MUX_SEL_V 0x1
|
|
#define RTC_IO_PDAC1_MUX_SEL_S 19
|
|
/* RTC_IO_PDAC1_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: PDAC1 function sel*/
|
|
#define RTC_IO_PDAC1_FUN_SEL 0x00000003
|
|
#define RTC_IO_PDAC1_FUN_SEL_M ((RTC_IO_PDAC1_FUN_SEL_V)<<(RTC_IO_PDAC1_FUN_SEL_S))
|
|
#define RTC_IO_PDAC1_FUN_SEL_V 0x3
|
|
#define RTC_IO_PDAC1_FUN_SEL_S 17
|
|
/* RTC_IO_PDAC1_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_PDAC1_SLP_SEL (BIT(16))
|
|
#define RTC_IO_PDAC1_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_PDAC1_SLP_SEL_V 0x1
|
|
#define RTC_IO_PDAC1_SLP_SEL_S 16
|
|
/* RTC_IO_PDAC1_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_PDAC1_SLP_IE (BIT(15))
|
|
#define RTC_IO_PDAC1_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_PDAC1_SLP_IE_V 0x1
|
|
#define RTC_IO_PDAC1_SLP_IE_S 15
|
|
/* RTC_IO_PDAC1_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_PDAC1_SLP_OE (BIT(14))
|
|
#define RTC_IO_PDAC1_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_PDAC1_SLP_OE_V 0x1
|
|
#define RTC_IO_PDAC1_SLP_OE_S 14
|
|
/* RTC_IO_PDAC1_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_PDAC1_FUN_IE (BIT(13))
|
|
#define RTC_IO_PDAC1_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_PDAC1_FUN_IE_V 0x1
|
|
#define RTC_IO_PDAC1_FUN_IE_S 13
|
|
/* RTC_IO_PDAC1_DAC_XPD_FORCE : R/W ;bitpos:[12] ;default: 1'd0 ; */
|
|
/*description: 1: use reg_pdac1_xpd_dac to control PDAC1_XPD_DAC 0: use SAR
|
|
ADC FSM to control PDAC1_XPD_DAC*/
|
|
#define RTC_IO_PDAC1_DAC_XPD_FORCE (BIT(12))
|
|
#define RTC_IO_PDAC1_DAC_XPD_FORCE_M (BIT(12))
|
|
#define RTC_IO_PDAC1_DAC_XPD_FORCE_V 0x1
|
|
#define RTC_IO_PDAC1_DAC_XPD_FORCE_S 12
|
|
/* RTC_IO_PDAC1_XPD_DAC : R/W ;bitpos:[11] ;default: 1'd0 ; */
|
|
/*description: PDAC1_XPD_DAC*/
|
|
#define RTC_IO_PDAC1_XPD_DAC (BIT(11))
|
|
#define RTC_IO_PDAC1_XPD_DAC_M (BIT(11))
|
|
#define RTC_IO_PDAC1_XPD_DAC_V 0x1
|
|
#define RTC_IO_PDAC1_XPD_DAC_S 11
|
|
/* RTC_IO_PDAC1_DAC : R/W ;bitpos:[10:3] ;default: 8'd0 ; */
|
|
/*description: PDAC1_DAC*/
|
|
#define RTC_IO_PDAC1_DAC 0x000000FF
|
|
#define RTC_IO_PDAC1_DAC_M ((RTC_IO_PDAC1_DAC_V)<<(RTC_IO_PDAC1_DAC_S))
|
|
#define RTC_IO_PDAC1_DAC_V 0xFF
|
|
#define RTC_IO_PDAC1_DAC_S 3
|
|
|
|
#define RTC_IO_PAD_DAC2_REG (DR_REG_RTCIO_BASE + 0xCC)
|
|
/* RTC_IO_PDAC2_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: PDAC2_DRV*/
|
|
#define RTC_IO_PDAC2_DRV 0x00000003
|
|
#define RTC_IO_PDAC2_DRV_M ((RTC_IO_PDAC2_DRV_V)<<(RTC_IO_PDAC2_DRV_S))
|
|
#define RTC_IO_PDAC2_DRV_V 0x3
|
|
#define RTC_IO_PDAC2_DRV_S 29
|
|
/* RTC_IO_PDAC2_RDE : R/W ;bitpos:[28] ;default: 1'd0 ; */
|
|
/*description: PDAC2_RDE*/
|
|
#define RTC_IO_PDAC2_RDE (BIT(28))
|
|
#define RTC_IO_PDAC2_RDE_M (BIT(28))
|
|
#define RTC_IO_PDAC2_RDE_V 0x1
|
|
#define RTC_IO_PDAC2_RDE_S 28
|
|
/* RTC_IO_PDAC2_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: PDAC2_RUE*/
|
|
#define RTC_IO_PDAC2_RUE (BIT(27))
|
|
#define RTC_IO_PDAC2_RUE_M (BIT(27))
|
|
#define RTC_IO_PDAC2_RUE_V 0x1
|
|
#define RTC_IO_PDAC2_RUE_S 27
|
|
/* RTC_IO_PDAC2_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_PDAC2_MUX_SEL (BIT(19))
|
|
#define RTC_IO_PDAC2_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_PDAC2_MUX_SEL_V 0x1
|
|
#define RTC_IO_PDAC2_MUX_SEL_S 19
|
|
/* RTC_IO_PDAC2_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: PDAC1 function sel*/
|
|
#define RTC_IO_PDAC2_FUN_SEL 0x00000003
|
|
#define RTC_IO_PDAC2_FUN_SEL_M ((RTC_IO_PDAC2_FUN_SEL_V)<<(RTC_IO_PDAC2_FUN_SEL_S))
|
|
#define RTC_IO_PDAC2_FUN_SEL_V 0x3
|
|
#define RTC_IO_PDAC2_FUN_SEL_S 17
|
|
/* RTC_IO_PDAC2_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_PDAC2_SLP_SEL (BIT(16))
|
|
#define RTC_IO_PDAC2_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_PDAC2_SLP_SEL_V 0x1
|
|
#define RTC_IO_PDAC2_SLP_SEL_S 16
|
|
/* RTC_IO_PDAC2_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_PDAC2_SLP_IE (BIT(15))
|
|
#define RTC_IO_PDAC2_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_PDAC2_SLP_IE_V 0x1
|
|
#define RTC_IO_PDAC2_SLP_IE_S 15
|
|
/* RTC_IO_PDAC2_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_PDAC2_SLP_OE (BIT(14))
|
|
#define RTC_IO_PDAC2_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_PDAC2_SLP_OE_V 0x1
|
|
#define RTC_IO_PDAC2_SLP_OE_S 14
|
|
/* RTC_IO_PDAC2_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_PDAC2_FUN_IE (BIT(13))
|
|
#define RTC_IO_PDAC2_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_PDAC2_FUN_IE_V 0x1
|
|
#define RTC_IO_PDAC2_FUN_IE_S 13
|
|
/* RTC_IO_PDAC2_DAC_XPD_FORCE : R/W ;bitpos:[12] ;default: 1'd0 ; */
|
|
/*description: 1: use reg_pdac2_xpd_dac to control PDAC2_XPD_DAC 0: use SAR
|
|
ADC FSM to control PDAC2_XPD_DAC*/
|
|
#define RTC_IO_PDAC2_DAC_XPD_FORCE (BIT(12))
|
|
#define RTC_IO_PDAC2_DAC_XPD_FORCE_M (BIT(12))
|
|
#define RTC_IO_PDAC2_DAC_XPD_FORCE_V 0x1
|
|
#define RTC_IO_PDAC2_DAC_XPD_FORCE_S 12
|
|
/* RTC_IO_PDAC2_XPD_DAC : R/W ;bitpos:[11] ;default: 1'd0 ; */
|
|
/*description: PDAC2_XPD_DAC*/
|
|
#define RTC_IO_PDAC2_XPD_DAC (BIT(11))
|
|
#define RTC_IO_PDAC2_XPD_DAC_M (BIT(11))
|
|
#define RTC_IO_PDAC2_XPD_DAC_V 0x1
|
|
#define RTC_IO_PDAC2_XPD_DAC_S 11
|
|
/* RTC_IO_PDAC2_DAC : R/W ;bitpos:[10:3] ;default: 8'd0 ; */
|
|
/*description: PDAC2_DAC*/
|
|
#define RTC_IO_PDAC2_DAC 0x000000FF
|
|
#define RTC_IO_PDAC2_DAC_M ((RTC_IO_PDAC2_DAC_V)<<(RTC_IO_PDAC2_DAC_S))
|
|
#define RTC_IO_PDAC2_DAC_V 0xFF
|
|
#define RTC_IO_PDAC2_DAC_S 3
|
|
|
|
#define RTC_IO_RTC_PAD19_REG (DR_REG_RTCIO_BASE + 0xD0)
|
|
/* RTC_IO_PAD19_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_PAD19_DRV 0x00000003
|
|
#define RTC_IO_PAD19_DRV_M ((RTC_IO_PAD19_DRV_V)<<(RTC_IO_PAD19_DRV_S))
|
|
#define RTC_IO_PAD19_DRV_V 0x3
|
|
#define RTC_IO_PAD19_DRV_S 29
|
|
/* RTC_IO_PAD19_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_PAD19_RDE (BIT(28))
|
|
#define RTC_IO_PAD19_RDE_M (BIT(28))
|
|
#define RTC_IO_PAD19_RDE_V 0x1
|
|
#define RTC_IO_PAD19_RDE_S 28
|
|
/* RTC_IO_PAD19_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_PAD19_RUE (BIT(27))
|
|
#define RTC_IO_PAD19_RUE_M (BIT(27))
|
|
#define RTC_IO_PAD19_RUE_V 0x1
|
|
#define RTC_IO_PAD19_RUE_S 27
|
|
/* RTC_IO_PAD19_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_PAD19_MUX_SEL (BIT(19))
|
|
#define RTC_IO_PAD19_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_PAD19_MUX_SEL_V 0x1
|
|
#define RTC_IO_PAD19_MUX_SEL_S 19
|
|
/* RTC_IO_PAD19_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_PAD19_FUN_SEL 0x00000003
|
|
#define RTC_IO_PAD19_FUN_SEL_M ((RTC_IO_PAD19_FUN_SEL_V)<<(RTC_IO_PAD19_FUN_SEL_S))
|
|
#define RTC_IO_PAD19_FUN_SEL_V 0x3
|
|
#define RTC_IO_PAD19_FUN_SEL_S 17
|
|
/* RTC_IO_PAD19_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_PAD19_SLP_SEL (BIT(16))
|
|
#define RTC_IO_PAD19_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_PAD19_SLP_SEL_V 0x1
|
|
#define RTC_IO_PAD19_SLP_SEL_S 16
|
|
/* RTC_IO_PAD19_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_PAD19_SLP_IE (BIT(15))
|
|
#define RTC_IO_PAD19_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_PAD19_SLP_IE_V 0x1
|
|
#define RTC_IO_PAD19_SLP_IE_S 15
|
|
/* RTC_IO_PAD19_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_PAD19_SLP_OE (BIT(14))
|
|
#define RTC_IO_PAD19_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_PAD19_SLP_OE_V 0x1
|
|
#define RTC_IO_PAD19_SLP_OE_S 14
|
|
/* RTC_IO_PAD19_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_PAD19_FUN_IE (BIT(13))
|
|
#define RTC_IO_PAD19_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_PAD19_FUN_IE_V 0x1
|
|
#define RTC_IO_PAD19_FUN_IE_S 13
|
|
|
|
#define RTC_IO_RTC_PAD20_REG (DR_REG_RTCIO_BASE + 0xD4)
|
|
/* RTC_IO_PAD20_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_PAD20_DRV 0x00000003
|
|
#define RTC_IO_PAD20_DRV_M ((RTC_IO_PAD20_DRV_V)<<(RTC_IO_PAD20_DRV_S))
|
|
#define RTC_IO_PAD20_DRV_V 0x3
|
|
#define RTC_IO_PAD20_DRV_S 29
|
|
/* RTC_IO_PAD20_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_PAD20_RDE (BIT(28))
|
|
#define RTC_IO_PAD20_RDE_M (BIT(28))
|
|
#define RTC_IO_PAD20_RDE_V 0x1
|
|
#define RTC_IO_PAD20_RDE_S 28
|
|
/* RTC_IO_PAD20_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_PAD20_RUE (BIT(27))
|
|
#define RTC_IO_PAD20_RUE_M (BIT(27))
|
|
#define RTC_IO_PAD20_RUE_V 0x1
|
|
#define RTC_IO_PAD20_RUE_S 27
|
|
/* RTC_IO_PAD20_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_PAD20_MUX_SEL (BIT(19))
|
|
#define RTC_IO_PAD20_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_PAD20_MUX_SEL_V 0x1
|
|
#define RTC_IO_PAD20_MUX_SEL_S 19
|
|
/* RTC_IO_PAD20_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_PAD20_FUN_SEL 0x00000003
|
|
#define RTC_IO_PAD20_FUN_SEL_M ((RTC_IO_PAD20_FUN_SEL_V)<<(RTC_IO_PAD20_FUN_SEL_S))
|
|
#define RTC_IO_PAD20_FUN_SEL_V 0x3
|
|
#define RTC_IO_PAD20_FUN_SEL_S 17
|
|
/* RTC_IO_PAD20_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_PAD20_SLP_SEL (BIT(16))
|
|
#define RTC_IO_PAD20_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_PAD20_SLP_SEL_V 0x1
|
|
#define RTC_IO_PAD20_SLP_SEL_S 16
|
|
/* RTC_IO_PAD20_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_PAD20_SLP_IE (BIT(15))
|
|
#define RTC_IO_PAD20_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_PAD20_SLP_IE_V 0x1
|
|
#define RTC_IO_PAD20_SLP_IE_S 15
|
|
/* RTC_IO_PAD20_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_PAD20_SLP_OE (BIT(14))
|
|
#define RTC_IO_PAD20_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_PAD20_SLP_OE_V 0x1
|
|
#define RTC_IO_PAD20_SLP_OE_S 14
|
|
/* RTC_IO_PAD20_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_PAD20_FUN_IE (BIT(13))
|
|
#define RTC_IO_PAD20_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_PAD20_FUN_IE_V 0x1
|
|
#define RTC_IO_PAD20_FUN_IE_S 13
|
|
|
|
#define RTC_IO_RTC_PAD21_REG (DR_REG_RTCIO_BASE + 0xD8)
|
|
/* RTC_IO_PAD21_DRV : R/W ;bitpos:[30:29] ;default: 2'd2 ; */
|
|
/*description: DRV*/
|
|
#define RTC_IO_PAD21_DRV 0x00000003
|
|
#define RTC_IO_PAD21_DRV_M ((RTC_IO_PAD21_DRV_V)<<(RTC_IO_PAD21_DRV_S))
|
|
#define RTC_IO_PAD21_DRV_V 0x3
|
|
#define RTC_IO_PAD21_DRV_S 29
|
|
/* RTC_IO_PAD21_RDE : R/W ;bitpos:[28] ;default: 1'd1 ; */
|
|
/*description: RDE*/
|
|
#define RTC_IO_PAD21_RDE (BIT(28))
|
|
#define RTC_IO_PAD21_RDE_M (BIT(28))
|
|
#define RTC_IO_PAD21_RDE_V 0x1
|
|
#define RTC_IO_PAD21_RDE_S 28
|
|
/* RTC_IO_PAD21_RUE : R/W ;bitpos:[27] ;default: 1'd0 ; */
|
|
/*description: RUE*/
|
|
#define RTC_IO_PAD21_RUE (BIT(27))
|
|
#define RTC_IO_PAD21_RUE_M (BIT(27))
|
|
#define RTC_IO_PAD21_RUE_V 0x1
|
|
#define RTC_IO_PAD21_RUE_S 27
|
|
/* RTC_IO_PAD21_MUX_SEL : R/W ;bitpos:[19] ;default: 1'd0 ; */
|
|
/*description: 1: use RTC GPIO 0: use digital GPIO*/
|
|
#define RTC_IO_PAD21_MUX_SEL (BIT(19))
|
|
#define RTC_IO_PAD21_MUX_SEL_M (BIT(19))
|
|
#define RTC_IO_PAD21_MUX_SEL_V 0x1
|
|
#define RTC_IO_PAD21_MUX_SEL_S 19
|
|
/* RTC_IO_PAD21_FUN_SEL : R/W ;bitpos:[18:17] ;default: 2'd0 ; */
|
|
/*description: function sel*/
|
|
#define RTC_IO_PAD21_FUN_SEL 0x00000003
|
|
#define RTC_IO_PAD21_FUN_SEL_M ((RTC_IO_PAD21_FUN_SEL_V)<<(RTC_IO_PAD21_FUN_SEL_S))
|
|
#define RTC_IO_PAD21_FUN_SEL_V 0x3
|
|
#define RTC_IO_PAD21_FUN_SEL_S 17
|
|
/* RTC_IO_PAD21_SLP_SEL : R/W ;bitpos:[16] ;default: 1'd0 ; */
|
|
/*description: 1: enable sleep mode during sleep 0: no sleep mode*/
|
|
#define RTC_IO_PAD21_SLP_SEL (BIT(16))
|
|
#define RTC_IO_PAD21_SLP_SEL_M (BIT(16))
|
|
#define RTC_IO_PAD21_SLP_SEL_V 0x1
|
|
#define RTC_IO_PAD21_SLP_SEL_S 16
|
|
/* RTC_IO_PAD21_SLP_IE : R/W ;bitpos:[15] ;default: 1'd0 ; */
|
|
/*description: input enable in sleep mode*/
|
|
#define RTC_IO_PAD21_SLP_IE (BIT(15))
|
|
#define RTC_IO_PAD21_SLP_IE_M (BIT(15))
|
|
#define RTC_IO_PAD21_SLP_IE_V 0x1
|
|
#define RTC_IO_PAD21_SLP_IE_S 15
|
|
/* RTC_IO_PAD21_SLP_OE : R/W ;bitpos:[14] ;default: 1'd0 ; */
|
|
/*description: output enable in sleep mode*/
|
|
#define RTC_IO_PAD21_SLP_OE (BIT(14))
|
|
#define RTC_IO_PAD21_SLP_OE_M (BIT(14))
|
|
#define RTC_IO_PAD21_SLP_OE_V 0x1
|
|
#define RTC_IO_PAD21_SLP_OE_S 14
|
|
/* RTC_IO_PAD21_FUN_IE : R/W ;bitpos:[13] ;default: 1'd0 ; */
|
|
/*description: input enable in work mode*/
|
|
#define RTC_IO_PAD21_FUN_IE (BIT(13))
|
|
#define RTC_IO_PAD21_FUN_IE_M (BIT(13))
|
|
#define RTC_IO_PAD21_FUN_IE_V 0x1
|
|
#define RTC_IO_PAD21_FUN_IE_S 13
|
|
|
|
#define RTC_IO_EXT_WAKEUP0_REG (DR_REG_RTCIO_BASE + 0xDC)
|
|
/* RTC_IO_EXT_WAKEUP0_SEL : R/W ;bitpos:[31:27] ;default: 5'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_EXT_WAKEUP0_SEL 0x0000001F
|
|
#define RTC_IO_EXT_WAKEUP0_SEL_M ((RTC_IO_EXT_WAKEUP0_SEL_V)<<(RTC_IO_EXT_WAKEUP0_SEL_S))
|
|
#define RTC_IO_EXT_WAKEUP0_SEL_V 0x1F
|
|
#define RTC_IO_EXT_WAKEUP0_SEL_S 27
|
|
|
|
#define RTC_IO_XTL_EXT_CTR_REG (DR_REG_RTCIO_BASE + 0xE0)
|
|
/* RTC_IO_XTL_EXT_CTR_SEL : R/W ;bitpos:[31:27] ;default: 5'd0 ; */
|
|
/*description: select RTC GPIO 0 ~ 17 to control XTAL*/
|
|
#define RTC_IO_XTL_EXT_CTR_SEL 0x0000001F
|
|
#define RTC_IO_XTL_EXT_CTR_SEL_M ((RTC_IO_XTL_EXT_CTR_SEL_V)<<(RTC_IO_XTL_EXT_CTR_SEL_S))
|
|
#define RTC_IO_XTL_EXT_CTR_SEL_V 0x1F
|
|
#define RTC_IO_XTL_EXT_CTR_SEL_S 27
|
|
|
|
#define RTC_IO_SAR_I2C_IO_REG (DR_REG_RTCIO_BASE + 0xE4)
|
|
/* RTC_IO_SAR_I2C_SDA_SEL : R/W ;bitpos:[31:30] ;default: 2'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_SAR_I2C_SDA_SEL 0x00000003
|
|
#define RTC_IO_SAR_I2C_SDA_SEL_M ((RTC_IO_SAR_I2C_SDA_SEL_V)<<(RTC_IO_SAR_I2C_SDA_SEL_S))
|
|
#define RTC_IO_SAR_I2C_SDA_SEL_V 0x3
|
|
#define RTC_IO_SAR_I2C_SDA_SEL_S 30
|
|
/* RTC_IO_SAR_I2C_SCL_SEL : R/W ;bitpos:[29:28] ;default: 2'd0 ; */
|
|
/*description: */
|
|
#define RTC_IO_SAR_I2C_SCL_SEL 0x00000003
|
|
#define RTC_IO_SAR_I2C_SCL_SEL_M ((RTC_IO_SAR_I2C_SCL_SEL_V)<<(RTC_IO_SAR_I2C_SCL_SEL_S))
|
|
#define RTC_IO_SAR_I2C_SCL_SEL_V 0x3
|
|
#define RTC_IO_SAR_I2C_SCL_SEL_S 28
|
|
/* RTC_IO_SAR_DEBUG_BIT_SEL : R/W ;bitpos:[27:23] ;default: 5'h0 ; */
|
|
/*description: */
|
|
#define RTC_IO_SAR_DEBUG_BIT_SEL 0x0000001F
|
|
#define RTC_IO_SAR_DEBUG_BIT_SEL_M ((RTC_IO_SAR_DEBUG_BIT_SEL_V)<<(RTC_IO_SAR_DEBUG_BIT_SEL_S))
|
|
#define RTC_IO_SAR_DEBUG_BIT_SEL_V 0x1F
|
|
#define RTC_IO_SAR_DEBUG_BIT_SEL_S 23
|
|
|
|
#define RTC_IO_TOUCH_CTRL_REG (DR_REG_RTCIO_BASE + 0xE8)
|
|
/* RTC_IO_IO_TOUCH_BUFMODE : R/W ;bitpos:[4] ;default: 1'd0 ; */
|
|
/*description: BUF_MODE when touch work without fsm*/
|
|
#define RTC_IO_IO_TOUCH_BUFMODE (BIT(4))
|
|
#define RTC_IO_IO_TOUCH_BUFMODE_M (BIT(4))
|
|
#define RTC_IO_IO_TOUCH_BUFMODE_V 0x1
|
|
#define RTC_IO_IO_TOUCH_BUFMODE_S 4
|
|
/* RTC_IO_IO_TOUCH_BUFSEL : R/W ;bitpos:[3:0] ;default: 4'd0 ; */
|
|
/*description: BUF_SEL when touch work without fsm*/
|
|
#define RTC_IO_IO_TOUCH_BUFSEL 0x0000000F
|
|
#define RTC_IO_IO_TOUCH_BUFSEL_M ((RTC_IO_IO_TOUCH_BUFSEL_V)<<(RTC_IO_IO_TOUCH_BUFSEL_S))
|
|
#define RTC_IO_IO_TOUCH_BUFSEL_V 0xF
|
|
#define RTC_IO_IO_TOUCH_BUFSEL_S 0
|
|
|
|
#define RTC_IO_DATE_REG (DR_REG_RTCIO_BASE + 0x1FC)
|
|
/* RTC_IO_IO_DATE : R/W ;bitpos:[27:0] ;default: 28'h1903170 ; */
|
|
/*description: */
|
|
#define RTC_IO_IO_DATE 0x0FFFFFFF
|
|
#define RTC_IO_IO_DATE_M ((RTC_IO_IO_DATE_V)<<(RTC_IO_IO_DATE_S))
|
|
#define RTC_IO_IO_DATE_V 0xFFFFFFF
|
|
#define RTC_IO_IO_DATE_S 0
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
#endif /*_SOC_RTC_IO_REG_H_ */
|