esp-idf/examples/protocols/sockets/udp_server
2022-04-28 07:55:28 +00:00
..
main udp example:Optimization udp example with recv_msg 2022-04-28 07:55:28 +00:00
CMakeLists.txt examples/protocols/sockets: use common network component 2019-04-15 03:32:05 +00:00
example_test.py CI/socket examples: Add UDP operation retries, wait until server is up 2021-06-23 07:36:27 +02:00
README.md udp example:Optimization udp example with recv_msg 2022-04-28 07:55:28 +00:00
sdkconfig.ci Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00

UDP Server example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

The application creates UDP socket with the specified port number and waits for the data to be received. Received data are printed as ASCII text and retransmitted back to the client.

How to use example

In order to create UDP client that communicates with UDP server example, choose one of the following options.

There are many host-side tools which can be used to interact with the UDP/TCP server/client. One command line tool is netcat which can send and receive many kinds of packets. Note: please replace 192.168.0.167 3333 with desired IPV4/IPV6 address (displayed in monitor console) and port number in the following commands. If want to use this RECVINFO function, please enable LWIP_NETBUF_RECVINFO in menuconfig,this function can only resolve the destination address of IPV4.

In addition to those tools, simple Python scripts can be found under sockets/scripts directory. Every script is designed to interact with one of the examples.

Send UDP packet via netcat

echo "Hello from PC" | nc -w1 -u 192.168.0.167 3333

Receive UDP packet via netcat

echo "Hello from PC" | nc -w1 -u 192.168.0.167 3333

UDP client using netcat

nc -u 192.168.0.167 3333

Python scripts

Script example_test.py could be used as a counter part to the udp-server application, IP address and the message to be send to the server shall be stated as arguments. Example:

python example_test.py 192.168.0.167 Message

Note that this script is used in automated tests, as well, so the IDF test framework packages need to be imported; please add $IDF_PATH/tools/ci/python_packages to PYTHONPATH.

Hardware Required

This example can be run on any commonly available ESP32 development board.

Configure the project

idf.py menuconfig

Set following parameters under Example Configuration Options:

  • Set IP version of the example to be IPV4 or IPV6.

  • Set Port number that represents remote port the example will create.

Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Troubleshooting

Start server first, to receive data sent from the client (application).