esp-idf/examples/wifi/getting_started/station

WiFi station example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

How to use example

Configure the project

make menuconfig

• Set serial port under Serial Flasher Options.

• Set WiFi SSID and WiFi Password and Maximum retry under Example Configuration Options.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

make -j4 flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

There is the console output for station connects to ap successfully:

I (727) wifi station: ESP_WIFI_MODE_STA
I (727) wifi: wifi driver task: 3ffc0c68, prio:23, stack:3584, core=0
I (727) wifi: wifi firmware version: 19b3110
I (727) wifi: config NVS flash: enabled
I (727) wifi: config nano formating: disabled
I (737) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (747) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (777) wifi: Init dynamic tx buffer num: 32
I (777) wifi: Init data frame dynamic rx buffer num: 32
I (777) wifi: Init management frame dynamic rx buffer num: 32
I (777) wifi: Init static rx buffer size: 1600
I (787) wifi: Init static rx buffer num: 10
I (787) wifi: Init dynamic rx buffer num: 32
I (907) phy: phy_version: 3960, 5211945, Jul 18 2018, 10:40:07, 0, 0
I (907) wifi: mode : sta (30:ae:a4:80:45:68)
I (907) wifi station: wifi_init_sta finished.
I (907) wifi station: connect to ap SSID:myssid password:mypassword
I (1027) wifi: n:6 0, o:1 0, ap:255 255, sta:6 0, prof:1
I (2017) wifi: state: init -> auth (b0)
I (2017) wifi: state: auth -> assoc (0)
I (2027) wifi: state: assoc -> run (10)
I (2067) wifi: connected with myssid, channel 6
I (2067) wifi: pm start, type: 1

I (3227) event: sta ip: 172.20.10.7, mask: 255.255.255.240, gw: 172.20.10.1
I (3227) wifi station: got ip:172.20.10.7

There is the console output for station connects to ap failed:

I (728) wifi station: ESP_WIFI_MODE_STA
I (728) wifi: wifi driver task: 3ffc0c68, prio:23, stack:3584, core=0
I (728) wifi: wifi firmware version: 19b3110
I (728) wifi: config NVS flash: enabled
I (738) wifi: config nano formating: disabled
I (738) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (748) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (778) wifi: Init dynamic tx buffer num: 32
I (778) wifi: Init data frame dynamic rx buffer num: 32
I (778) wifi: Init management frame dynamic rx buffer num: 32
I (788) wifi: Init static rx buffer size: 1600
I (788) wifi: Init static rx buffer num: 10
I (788) wifi: Init dynamic rx buffer num: 32
I (908) phy: phy_version: 3960, 5211945, Jul 18 2018, 10:40:07, 0, 0
I (908) wifi: mode : sta (30:ae:a4:80:45:68)
I (908) wifi station: wifi_init_sta finished.
I (918) wifi station: connect to ap SSID:myssid password:mypassword
I (3328) wifi station: retry to connect to the AP
I (3328) wifi station: connect to the AP fail

I (5738) wifi station: retry to connect to the AP
I (5738) wifi station: connect to the AP fail

I (8148) wifi station: retry to connect to the AP
I (8148) wifi station: connect to the AP fail

I (10558) wifi station: retry to connect to the AP
I (10558) wifi station: connect to the AP fail

I (12968) wifi station: retry to connect to the AP
I (12968) wifi station: connect to the AP fail

I (15378) wifi station: connect to the AP fail