alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
4f67fe7d3f
esp-idf/examples/zigbee/light_sample/light_bulb
History
Omar Chebib 83907aaa20 TWDT: Use the new TWDT Kconfig options in the examples and tests
2023-03-07 10:23:43 +08:00
..
main led_strip: use component manager in the example 2022-08-18 10:57:12 +08:00
CMakeLists.txt led_strip: use component manager in the example 2022-08-18 10:57:12 +08:00
partitions.csv Zigbee: Add light example 2021-11-11 19:03:01 +08:00
README.md Zigbee: Merging light_coordinator and light switch into one 2022-06-21 09:28:23 +00:00
sdkconfig.defaults TWDT: Use the new TWDT Kconfig options in the examples and tests 2023-03-07 10:23:43 +08:00

README.md

Supported Targets ESP32-H2

Light Bulb Example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This test code shows how to configure Zigbee end device and use it as a light bulb

Hardware Required

  • One development board with ESP32-H2 SoC acting as Zigbee end device (loaded with light bulb example)
  • A USB cable for power supply and programming
  • Choose another ESP32-H2 as Zigbee coordinator (see light switch example)

Configure the project

Before project configuration and build, make sure to set the correct chip target using idf.py set-target esp32h2.

Build and Flash

Build the project, flash it to the board, and start the monitor tool to view the serial output by running idf.py -p PORT flash monitor.

(To exit the serial monitor, type Ctrl-].)

Example Output

As you run the example, you will see the following log:

light bulb: I (918) ESP_ZB_LIGHT: status: 255 I (901) ESP_ZB_LIGHT: Zigbee stack initialized I (901) ESP_ZB_LIGHT: Start network steering I (2611) ESP_ZB_LIGHT: Joined network successfully (Extended PAN ID: aa:98:48:01:a0:03:f7:84, PAN ID: 0x0e8b) I (5651) ESP_ZB_LIGHT: on/off attribute setting to 1 I (6631) ESP_ZB_LIGHT: on/off attribute setting to 0 I (7331) ESP_ZB_LIGHT: on/off attribute setting to 1 I (8251) ESP_ZB_LIGHT: on/off attribute setting to 0 I (9111) ESP_ZB_LIGHT: on/off attribute setting to 1 I (9671) ESP_ZB_LIGHT: on/off attribute setting to 0

Light Control Functions

  • By toggling the switch button (BOOT) on the ESP32-H2 board loaded with the light switch example, the LED on this board loaded with light bulb example will be on and off.

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.