mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
371 lines
17 KiB
C
371 lines
17 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#pragma once
|
|
#include "soc.h"
|
|
|
|
/* The following are the bit fields for PERIPHS_IO_MUX_x_U registers */
|
|
/* Output enable in sleep mode */
|
|
#define SLP_OE (BIT(0))
|
|
#define SLP_OE_M (BIT(0))
|
|
#define SLP_OE_V 1
|
|
#define SLP_OE_S 0
|
|
/* Pin used for wakeup from sleep */
|
|
#define SLP_SEL (BIT(1))
|
|
#define SLP_SEL_M (BIT(1))
|
|
#define SLP_SEL_V 1
|
|
#define SLP_SEL_S 1
|
|
/* Pulldown enable in sleep mode */
|
|
#define SLP_PD (BIT(2))
|
|
#define SLP_PD_M (BIT(2))
|
|
#define SLP_PD_V 1
|
|
#define SLP_PD_S 2
|
|
/* Pullup enable in sleep mode */
|
|
#define SLP_PU (BIT(3))
|
|
#define SLP_PU_M (BIT(3))
|
|
#define SLP_PU_V 1
|
|
#define SLP_PU_S 3
|
|
/* Input enable in sleep mode */
|
|
#define SLP_IE (BIT(4))
|
|
#define SLP_IE_M (BIT(4))
|
|
#define SLP_IE_V 1
|
|
#define SLP_IE_S 4
|
|
/* Drive strength in sleep mode */
|
|
#define SLP_DRV 0x3
|
|
#define SLP_DRV_M (SLP_DRV_V << SLP_DRV_S)
|
|
#define SLP_DRV_V 0x3
|
|
#define SLP_DRV_S 5
|
|
/* Pulldown enable */
|
|
#define FUN_PD (BIT(7))
|
|
#define FUN_PD_M (BIT(7))
|
|
#define FUN_PD_V 1
|
|
#define FUN_PD_S 7
|
|
/* Pullup enable */
|
|
#define FUN_PU (BIT(8))
|
|
#define FUN_PU_M (BIT(8))
|
|
#define FUN_PU_V 1
|
|
#define FUN_PU_S 8
|
|
/* Input enable */
|
|
#define FUN_IE (BIT(9))
|
|
#define FUN_IE_M (FUN_IE_V << FUN_IE_S)
|
|
#define FUN_IE_V 1
|
|
#define FUN_IE_S 9
|
|
/* Drive strength */
|
|
#define FUN_DRV 0x3
|
|
#define FUN_DRV_M (FUN_DRV_V << FUN_DRV_S)
|
|
#define FUN_DRV_V 0x3
|
|
#define FUN_DRV_S 10
|
|
/* Function select (possible values are defined for each pin as FUNC_pinname_function below) */
|
|
#define MCU_SEL 0x7
|
|
#define MCU_SEL_M (MCU_SEL_V << MCU_SEL_S)
|
|
#define MCU_SEL_V 0x7
|
|
#define MCU_SEL_S 12
|
|
/* Pin filter (Pulse width shorter than 2 clock cycles will be filtered out) */
|
|
#define FILTER_EN (BIT(15))
|
|
#define FILTER_EN_M (FILTER_EN_V << FILTER_EN_S)
|
|
#define FILTER_EN_V 1
|
|
#define FILTER_EN_S 15
|
|
|
|
/* HYS_EN : R/W; bitpos: [16]; default: 0;
|
|
* Software enables hysteresis function for the pad.
|
|
* 1: Hysteresis enabled. 0: Hysteresis disabled.
|
|
*/
|
|
#define HYS_EN (BIT(16))
|
|
#define HYS_EN_M (HYS_EN_V << HYS_EN_S)
|
|
#define HYS_EN_V 0x00000001
|
|
#define HYS_EN_S 16
|
|
/* HYS_SEL : R/W; bitpos: [17]; default: 0;
|
|
* Select enabling signals of the pad from software and efuse hardware.
|
|
* 1: Select enabling siganl from software.
|
|
* 0: Select enabling signal from efuse hardware.
|
|
*/
|
|
#define HYS_SEL (BIT(17))
|
|
#define HYS_SEL_M (HYS_SEL_V << HYS_SEL_S)
|
|
#define HYS_SEL_V 0x00000001
|
|
#define HYS_SEL_S 17
|
|
|
|
#define PIN_SLP_INPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_IE)
|
|
#define PIN_SLP_INPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_IE)
|
|
#define PIN_SLP_OUTPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_OE)
|
|
#define PIN_SLP_OUTPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_OE)
|
|
#define PIN_SLP_PULLUP_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_PU)
|
|
#define PIN_SLP_PULLUP_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_PU)
|
|
#define PIN_SLP_PULLDOWN_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_PD)
|
|
#define PIN_SLP_PULLDOWN_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_PD)
|
|
#define PIN_SLP_SEL_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,SLP_SEL)
|
|
#define PIN_SLP_SEL_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,SLP_SEL)
|
|
|
|
#define PIN_INPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,FUN_IE)
|
|
#define PIN_INPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,FUN_IE)
|
|
#define PIN_SET_DRV(PIN_NAME, drv) REG_SET_FIELD(PIN_NAME, FUN_DRV, (drv));
|
|
#define PIN_PULLUP_DIS(PIN_NAME) REG_CLR_BIT(PIN_NAME, FUN_PU)
|
|
#define PIN_PULLUP_EN(PIN_NAME) REG_SET_BIT(PIN_NAME, FUN_PU)
|
|
#define PIN_PULLDWN_DIS(PIN_NAME) REG_CLR_BIT(PIN_NAME, FUN_PD)
|
|
#define PIN_PULLDWN_EN(PIN_NAME) REG_SET_BIT(PIN_NAME, FUN_PD)
|
|
#define PIN_FUNC_SELECT(PIN_NAME, FUNC) REG_SET_FIELD(PIN_NAME, MCU_SEL, FUNC)
|
|
#define PIN_FILTER_EN(PIN_NAME) REG_SET_BIT(PIN_NAME, FILTER_EN)
|
|
#define PIN_FILTER_DIS(PIN_NAME) REG_CLR_BIT(PIN_NAME, FILTER_EN)
|
|
#define PIN_HYS_EN_SEL_EFUSE(PIN_NAME) REG_CLR_BIT(PIN_NAME, HYS_SEL)
|
|
#define PIN_HYS_EN_SEL_SOFT(PIN_NAME) REG_SET_BIT(PIN_NAME, HYS_SEL)
|
|
#define PIN_HYS_SOFT_ENABLE(PIN_NAME) REG_SET_BIT(PIN_NAME, HYS_EN)
|
|
#define PIN_HYS_SOFT_DISABLE(PIN_NAME) REG_CLR_BIT(PIN_NAME, HYS_EN)
|
|
|
|
#define IO_MUX_GPIO0_REG PERIPHS_IO_MUX_GPIO0_U
|
|
#define IO_MUX_GPIO1_REG PERIPHS_IO_MUX_GPIO1_U
|
|
#define IO_MUX_GPIO2_REG PERIPHS_IO_MUX_MTMS_U
|
|
#define IO_MUX_GPIO3_REG PERIPHS_IO_MUX_MTDO_U
|
|
#define IO_MUX_GPIO4_REG PERIPHS_IO_MUX_MTCK_U
|
|
#define IO_MUX_GPIO5_REG PERIPHS_IO_MUX_MTDI_U
|
|
#define IO_MUX_GPIO6_REG PERIPHS_IO_MUX_GPIO6_U
|
|
#define IO_MUX_GPIO7_REG PERIPHS_IO_MUX_GPIO7_U
|
|
#define IO_MUX_GPIO8_REG PERIPHS_IO_MUX_GPIO8_U
|
|
#define IO_MUX_GPIO9_REG PERIPHS_IO_MUX_GPIO9_U
|
|
#define IO_MUX_GPIO10_REG PERIPHS_IO_MUX_GPIO10_U
|
|
#define IO_MUX_GPIO11_REG PERIPHS_IO_MUX_GPIO11_U
|
|
#define IO_MUX_GPIO12_REG PERIPHS_IO_MUX_GPIO12_U
|
|
#define IO_MUX_GPIO13_REG PERIPHS_IO_MUX_XTAL_32K_P_U
|
|
#define IO_MUX_GPIO14_REG PERIPHS_IO_MUX_XTAL_32K_N_U
|
|
#define IO_MUX_GPIO15_REG PERIPHS_IO_MUX_SPICS0_U
|
|
#define IO_MUX_GPIO16_REG PERIPHS_IO_MUX_SPIQ_U
|
|
#define IO_MUX_GPIO17_REG PERIPHS_IO_MUX_SPIWP_U
|
|
#define IO_MUX_GPIO18_REG PERIPHS_IO_MUX_SPIHD_U
|
|
#define IO_MUX_GPIO19_REG PERIPHS_IO_MUX_SPICLK_U
|
|
#define IO_MUX_GPIO20_REG PERIPHS_IO_MUX_SPID_U
|
|
#define IO_MUX_GPIO21_REG PERIPHS_IO_MUX_VDD_SPI_U
|
|
#define IO_MUX_GPIO22_REG PERIPHS_IO_MUX_GPIO22_U
|
|
#define IO_MUX_GPIO23_REG PERIPHS_IO_MUX_U0RXD_U
|
|
#define IO_MUX_GPIO24_REG PERIPHS_IO_MUX_U0TXD_U
|
|
#define IO_MUX_GPIO25_REG PERIPHS_IO_MUX_GPIO25_U
|
|
#define IO_MUX_GPIO26_REG PERIPHS_IO_MUX_GPIO26_U
|
|
#define IO_MUX_GPIO27_REG PERIPHS_IO_MUX_GPIO27_U
|
|
|
|
#define PIN_FUNC_GPIO 1
|
|
|
|
#define GPIO_PAD_PULLUP(num) do{PIN_PULLDWN_DIS(IOMUX_REG_GPIO##num);PIN_PULLUP_EN(IOMUX_REG_GPIO##num);}while(0)
|
|
#define GPIO_PAD_PULLDOWN(num) do{PIN_PULLUP_DIS(IOMUX_REG_GPIO##num);PIN_PULLDWN_EN(IOMUX_REG_GPIO##num);}while(0)
|
|
#define GPIO_PAD_SET_DRV(num, drv) PIN_SET_DRV(IOMUX_REG_GPIO##num, drv)
|
|
|
|
#define SPI_HD_GPIO_NUM 18
|
|
#define SPI_WP_GPIO_NUM 17
|
|
#define SPI_CS0_GPIO_NUM 15
|
|
#define SPI_CLK_GPIO_NUM 19
|
|
#define SPI_D_GPIO_NUM 20
|
|
#define SPI_Q_GPIO_NUM 16
|
|
|
|
#define USB_INT_PHY0_DM_GPIO_NUM 26
|
|
#define USB_INT_PHY0_DP_GPIO_NUM 27
|
|
|
|
#define EXT_OSC_SLOW_GPIO_NUM 13
|
|
|
|
#define MAX_RTC_GPIO_NUM 14 // GPIO7~14 are the pads with LP function
|
|
#define MAX_PAD_GPIO_NUM 27
|
|
#define MAX_GPIO_NUM 31
|
|
#define HIGH_IO_HOLD_BIT_SHIFT 32
|
|
|
|
|
|
#define REG_IO_MUX_BASE DR_REG_IO_MUX_BASE
|
|
#define PIN_CTRL (REG_IO_MUX_BASE +0x00)
|
|
|
|
#define CLK_OUT3 IO_MUX_CLK_OUT3
|
|
#define CLK_OUT3_V IO_MUX_CLK_OUT3_V
|
|
#define CLK_OUT3_S IO_MUX_CLK_OUT3_S
|
|
#define CLK_OUT3_M IO_MUX_CLK_OUT3_M
|
|
#define CLK_OUT2 IO_MUX_CLK_OUT2
|
|
#define CLK_OUT2_V IO_MUX_CLK_OUT2_V
|
|
#define CLK_OUT2_S IO_MUX_CLK_OUT2_S
|
|
#define CLK_OUT2_M IO_MUX_CLK_OUT2_M
|
|
#define CLK_OUT1 IO_MUX_CLK_OUT1
|
|
#define CLK_OUT1_V IO_MUX_CLK_OUT1_V
|
|
#define CLK_OUT1_S IO_MUX_CLK_OUT1_S
|
|
#define CLK_OUT1_M IO_MUX_CLK_OUT1_M
|
|
// definitions above are inherited from previous version of code, should double check
|
|
|
|
// definitions below are generated from pin_txt.csv
|
|
#define PERIPHS_IO_MUX_GPIO0_U (REG_IO_MUX_BASE + 0x4)
|
|
#define FUNC_GPIO0_FSPIQ 2
|
|
#define FUNC_GPIO0_GPIO0 1
|
|
#define FUNC_GPIO0_GPIO0_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO1_U (REG_IO_MUX_BASE + 0x8)
|
|
#define FUNC_GPIO1_FSPICS0 2
|
|
#define FUNC_GPIO1_GPIO1 1
|
|
#define FUNC_GPIO1_GPIO1_0 0
|
|
|
|
#define PERIPHS_IO_MUX_MTMS_U (REG_IO_MUX_BASE + 0xC)
|
|
#define FUNC_MTMS_FSPIWP 2
|
|
#define FUNC_MTMS_GPIO2 1
|
|
#define FUNC_MTMS_MTMS 0
|
|
|
|
#define PERIPHS_IO_MUX_MTDO_U (REG_IO_MUX_BASE + 0x10)
|
|
#define FUNC_MTDO_FSPIHD 2
|
|
#define FUNC_MTDO_GPIO3 1
|
|
#define FUNC_MTDO_MTDO 0
|
|
|
|
#define PERIPHS_IO_MUX_MTCK_U (REG_IO_MUX_BASE + 0x14)
|
|
#define FUNC_MTCK_FSPICLK 2
|
|
#define FUNC_MTCK_GPIO4 1
|
|
#define FUNC_MTCK_MTCK 0
|
|
|
|
#define PERIPHS_IO_MUX_MTDI_U (REG_IO_MUX_BASE + 0x18)
|
|
#define FUNC_MTDI_FSPID 2
|
|
#define FUNC_MTDI_GPIO5 1
|
|
#define FUNC_MTDI_MTDI 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO6_U (REG_IO_MUX_BASE + 0x1C)
|
|
#define FUNC_GPIO6_GPIO6 1
|
|
#define FUNC_GPIO6_GPIO6_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO7_U (REG_IO_MUX_BASE + 0x20)
|
|
#define FUNC_GPIO7_GPIO7 1
|
|
#define FUNC_GPIO7_GPIO7_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO8_U (REG_IO_MUX_BASE + 0x24)
|
|
#define FUNC_GPIO8_GPIO8 1
|
|
#define FUNC_GPIO8_GPIO8_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO9_U (REG_IO_MUX_BASE + 0x28)
|
|
#define FUNC_GPIO9_GPIO9 1
|
|
#define FUNC_GPIO9_GPIO9_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO10_U (REG_IO_MUX_BASE + 0x2C)
|
|
#define FUNC_GPIO10_GPIO10 1
|
|
#define FUNC_GPIO10_GPIO10_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO11_U (REG_IO_MUX_BASE + 0x30)
|
|
#define FUNC_GPIO11_GPIO11 1
|
|
#define FUNC_GPIO11_GPIO11_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO12_U (REG_IO_MUX_BASE + 0x34)
|
|
#define FUNC_GPIO12_GPIO12 1
|
|
#define FUNC_GPIO12_GPIO12_0 0
|
|
|
|
#define PERIPHS_IO_MUX_XTAL_32K_P_U (REG_IO_MUX_BASE + 0x38)
|
|
#define FUNC_XTAL_32K_P_GPIO13 1
|
|
#define FUNC_XTAL_32K_P_GPIO13_0 0
|
|
|
|
#define PERIPHS_IO_MUX_XTAL_32K_N_U (REG_IO_MUX_BASE + 0x3C)
|
|
#define FUNC_XTAL_32K_N_GPIO14 1
|
|
#define FUNC_XTAL_32K_N_GPIO14_0 0
|
|
|
|
#define PERIPHS_IO_MUX_SPICS0_U (REG_IO_MUX_BASE + 0x40)
|
|
#define FUNC_SPICS0_GPIO15 1
|
|
#define FUNC_SPICS0_SPICS0 0
|
|
|
|
#define PERIPHS_IO_MUX_SPIQ_U (REG_IO_MUX_BASE + 0x44)
|
|
#define FUNC_SPIQ_GPIO16 1
|
|
#define FUNC_SPIQ_SPIQ 0
|
|
|
|
#define PERIPHS_IO_MUX_SPIWP_U (REG_IO_MUX_BASE + 0x48)
|
|
#define FUNC_SPIWP_GPIO17 1
|
|
#define FUNC_SPIWP_SPIWP 0
|
|
|
|
#define PERIPHS_IO_MUX_SPIHD_U (REG_IO_MUX_BASE + 0x4C)
|
|
#define FUNC_SPIHD_GPIO18 1
|
|
#define FUNC_SPIHD_SPIHD 0
|
|
|
|
#define PERIPHS_IO_MUX_SPICLK_U (REG_IO_MUX_BASE + 0x50)
|
|
#define FUNC_SPICLK_GPIO19 1
|
|
#define FUNC_SPICLK_SPICLK 0
|
|
|
|
#define PERIPHS_IO_MUX_SPID_U (REG_IO_MUX_BASE + 0x54)
|
|
#define FUNC_SPID_GPIO20 1
|
|
#define FUNC_SPID_SPID 0
|
|
|
|
#define PERIPHS_IO_MUX_VDD_SPI_U (REG_IO_MUX_BASE + 0x58)
|
|
#define FUNC_VDD_SPI_GPIO21 1
|
|
#define FUNC_VDD_SPI_GPIO21_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO22_U (REG_IO_MUX_BASE + 0x5C)
|
|
#define FUNC_GPIO22_GPIO22 1
|
|
#define FUNC_GPIO22_GPIO22_0 0
|
|
|
|
#define PERIPHS_IO_MUX_U0RXD_U (REG_IO_MUX_BASE + 0x60)
|
|
#define FUNC_U0RXD_FSPICS1 2
|
|
#define FUNC_U0RXD_GPIO23 1
|
|
#define FUNC_U0RXD_U0RXD 0
|
|
|
|
#define PERIPHS_IO_MUX_U0TXD_U (REG_IO_MUX_BASE + 0x64)
|
|
#define FUNC_U0TXD_FSPICS2 2
|
|
#define FUNC_U0TXD_GPIO24 1
|
|
#define FUNC_U0TXD_U0TXD 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO25_U (REG_IO_MUX_BASE + 0x68)
|
|
#define FUNC_GPIO25_FSPICS3 2
|
|
#define FUNC_GPIO25_GPIO25 1
|
|
#define FUNC_GPIO25_GPIO25_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO26_U (REG_IO_MUX_BASE + 0x6C)
|
|
#define FUNC_GPIO26_FSPICS4 2
|
|
#define FUNC_GPIO26_GPIO26 1
|
|
#define FUNC_GPIO26_GPIO26_0 0
|
|
|
|
#define PERIPHS_IO_MUX_GPIO27_U (REG_IO_MUX_BASE + 0x70)
|
|
#define FUNC_GPIO27_FSPICS5 2
|
|
#define FUNC_GPIO27_GPIO27 1
|
|
#define FUNC_GPIO27_GPIO27_0 0
|
|
|
|
/** IO_MUX_PIN_CTRL_REG register
|
|
* Clock Output Configuration
|
|
* Register
|
|
*/
|
|
#define IO_MUX_PIN_CTRL_REG (REG_IO_MUX_BASE + 0x0)
|
|
/* IO_MUX_CLK_OUT1 : R/W; bitpos: [5:0]; default: 15;
|
|
* If you want to output clock for I2S to CLK_OUT_out1, set this register
|
|
* to 0x0. CLK_OUT_out1 can be found in peripheral output
|
|
* signals.
|
|
*/
|
|
#define IO_MUX_CLK_OUT1 0x0000001F
|
|
#define IO_MUX_CLK_OUT1_M (IO_MUX_CLK_OUT1_V << IO_MUX_CLK_OUT1_S)
|
|
#define IO_MUX_CLK_OUT1_V 0x0000001F
|
|
#define IO_MUX_CLK_OUT1_S 0
|
|
/* IO_MUX_CLK_OUT2 : R/W; bitpos: [10:5]; default: 15;
|
|
* If you want to output clock for I2S to CLK_OUT_out2, set this register
|
|
* to 0x0. CLK_OUT_out2 can be found in peripheral output
|
|
* signals.
|
|
*/
|
|
#define IO_MUX_CLK_OUT2 0x0000001F
|
|
#define IO_MUX_CLK_OUT2_M (IO_MUX_CLK_OUT2_V << IO_MUX_CLK_OUT2_S)
|
|
#define IO_MUX_CLK_OUT2_V 0x0000001F
|
|
#define IO_MUX_CLK_OUT2_S 5
|
|
/* IO_MUX_CLK_OUT3 : R/W; bitpos: [15:10]; default: 7;
|
|
* If you want to output clock for I2S to CLK_OUT_out3, set this register
|
|
* to 0x0. CLK_OUT_out3 can be found in peripheral output
|
|
* signals.
|
|
*/
|
|
#define IO_MUX_CLK_OUT3 0x0000001F
|
|
#define IO_MUX_CLK_OUT3_M (IO_MUX_CLK_OUT3_V << IO_MUX_CLK_OUT3_S)
|
|
#define IO_MUX_CLK_OUT3_V 0x0000001F
|
|
#define IO_MUX_CLK_OUT3_S 10
|
|
|
|
/** IO_MUX_MODEM_DIAG_EN_REG register
|
|
* GPIO MATRIX Configure Register for modem
|
|
* diag
|
|
*/
|
|
#define IO_MUX_MODEM_DIAG_EN_REG (REG_IO_MUX_BASE + 0xbc)
|
|
/* IO_MUX_MODEM_DIAG_EN : R/W; bitpos: [32:0]; default: 0;
|
|
* bit i to enable modem_diag[i] into gpio matrix. 1:enable modem_diag[i]
|
|
* into gpio matrix. 0:enable other signals into gpio
|
|
* matrix
|
|
*/
|
|
#define IO_MUX_MODEM_DIAG_EN 0xFFFFFFFF
|
|
#define IO_MUX_MODEM_DIAG_EN_M (IO_MUX_MODEM_DIAG_EN_V << IO_MUX_MODEM_DIAG_EN_S)
|
|
#define IO_MUX_MODEM_DIAG_EN_V 0xFFFFFFFF
|
|
#define IO_MUX_MODEM_DIAG_EN_S 0
|
|
|
|
/** IO_MUX_DATE_REG register
|
|
* IO MUX Version Control
|
|
* Register
|
|
*/
|
|
#define IO_MUX_DATE_REG (REG_IO_MUX_BASE + 0xfc)
|
|
/* IO_MUX_REG_DATE : R/W; bitpos: [28:0]; default: 35680880;
|
|
* Version control
|
|
* register
|
|
*/
|
|
#define IO_MUX_REG_DATE 0x0FFFFFFF
|
|
#define IO_MUX_REG_DATE_M (IO_MUX_REG_DATE_V << IO_MUX_REG_DATE_S)
|
|
#define IO_MUX_REG_DATE_V 0x0FFFFFFF
|
|
#define IO_MUX_REG_DATE_S 0
|