esp-idf/components/protocomm/include/transports/protocomm_ble.h
Anurag Kar 120bd3a456 protocomm_ble : Fixed custom service UUID support
List of changes:
* Use 128 bit characteristic UUIDs when creating GATT table entries
* Change primary service attribute value to 128 bit custom service UUID
* Use raw advertisement data to convey flags and 128 bit primary service UUID
* Use raw scan response to send device name as complete local name
* Increase maximum device name length in relation to maximum scan response length
* Set Characteristic User Description attributes for each characteristic to convey protocomm endpoint names
2019-05-15 12:27:03 +00:00

112 lines
3.2 KiB
C

// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <esp_gap_ble_api.h>
#include <protocomm.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* BLE device name cannot be larger than this value
* 31 bytes (max scan response size) - 1 byte (length) - 1 byte (type) = 29 bytes
*/
#define MAX_BLE_DEVNAME_LEN (ESP_BLE_SCAN_RSP_DATA_LEN_MAX - 2)
/**
* @brief This structure maps handler required by protocomm layer to
* UUIDs which are used to uniquely identify BLE characteristics
* from a smartphone or a similar client device.
*/
typedef struct name_uuid {
/**
* Name of the handler, which is passed to protocomm layer
*/
const char *name;
/**
* UUID to be assigned to the BLE characteristic which is
* mapped to the handler
*/
uint16_t uuid;
} protocomm_ble_name_uuid_t;
/**
* @brief Config parameters for protocomm BLE service
*/
typedef struct {
/**
* BLE device name being broadcast at the time of provisioning
*/
char device_name[MAX_BLE_DEVNAME_LEN];
/**
* 128 bit UUID of the provisioning service
*/
uint8_t service_uuid[ESP_UUID_LEN_128];
/**
* Number of entries in the Name-UUID lookup table
*/
ssize_t nu_lookup_count;
/**
* Pointer to the Name-UUID lookup table
*/
protocomm_ble_name_uuid_t *nu_lookup;
} protocomm_ble_config_t;
/**
* @brief Start Bluetooth Low Energy based transport layer for provisioning
*
* Initialize and start required BLE service for provisioning. This includes
* the initialization for characteristics/service for BLE.
*
* @param[in] pc Protocomm instance pointer obtained from protocomm_new()
* @param[in] config Pointer to config structure for initializing BLE
*
* @return
* - ESP_OK : Success
* - ESP_FAIL : Simple BLE start error
* - ESP_ERR_NO_MEM : Error allocating memory for internal resources
* - ESP_ERR_INVALID_STATE : Error in ble config
* - ESP_ERR_INVALID_ARG : Null arguments
*/
esp_err_t protocomm_ble_start(protocomm_t *pc, const protocomm_ble_config_t *config);
/**
* @brief Stop Bluetooth Low Energy based transport layer for provisioning
*
* Stops service/task responsible for BLE based interactions for provisioning
*
* @note You might want to optionally reclaim memory from Bluetooth.
* Refer to the documentation of `esp_bt_mem_release` in that case.
*
* @param[in] pc Same protocomm instance that was passed to protocomm_ble_start()
*
* @return
* - ESP_OK : Success
* - ESP_FAIL : Simple BLE stop error
* - ESP_ERR_INVALID_ARG : Null / incorrect protocomm instance
*/
esp_err_t protocomm_ble_stop(protocomm_t *pc);
#ifdef __cplusplus
}
#endif