esp-idf/components/esp_system/ld/esp32h2/memory.ld.in
2022-12-07 11:38:51 +08:00

149 lines
5.4 KiB
Plaintext

/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* ESP32-H2 Linker Script Memory Layout
* This file describes the memory layout (memory blocks) by virtual memory addresses.
* This linker script is passed through the C preprocessor to include configuration options.
* Please use preprocessor features sparingly!
* Restrict to simple macros with numeric values, and/or #if/#endif blocks.
*/
#include "sdkconfig.h"
#include "ld.common"
#ifdef CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC
#define ESP_BOOTLOADER_RESERVE_RTC (CONFIG_BOOTLOADER_RESERVE_RTC_SIZE + CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC_SIZE)
#elif defined(CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP)
#define ESP_BOOTLOADER_RESERVE_RTC (CONFIG_BOOTLOADER_RESERVE_RTC_SIZE)
#else
#define ESP_BOOTLOADER_RESERVE_RTC 0
#endif
/**
* physical memory is mapped twice to the vritual address (IRAM and DRAM).
* `I_D_SRAM_OFFSET` is the offset between the two locations of the same physical memory
*/
#define SRAM_IRAM_START 0x40800000
#define SRAM_DRAM_START 0x40800000
#define I_D_SRAM_OFFSET (SRAM_IRAM_START - SRAM_DRAM_START)
#define SRAM_DRAM_END 0x40850000 - I_D_SRAM_OFFSET /* 2nd stage bootloader iram_loader_seg start address */
#define SRAM_IRAM_ORG (SRAM_IRAM_START)
#define SRAM_DRAM_ORG (SRAM_DRAM_START)
#define I_D_SRAM_SIZE SRAM_DRAM_END - SRAM_DRAM_ORG
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/*
* IDRAM0_2_SEG_SIZE_DEFAULT is used when page size is 64KB
*/
#define IDRAM0_2_SEG_SIZE (CONFIG_MMU_PAGE_SIZE << 8)
#endif
#if CONFIG_ESP32H2_USE_FIXED_STATIC_RAM_SIZE
ASSERT((CONFIG_ESP32H2_FIXED_STATIC_RAM_SIZE <= I_D_SRAM_SIZE), "Fixed static ram data does not fit.")
#define DRAM0_0_SEG_LEN CONFIG_ESP32H2_FIXED_STATIC_RAM_SIZE
#else
#define DRAM0_0_SEG_LEN I_D_SRAM_SIZE
#endif // CONFIG_ESP32H2_USE_FIXED_STATIC_RAM_SIZE
MEMORY
{
/**
* All these values assume the flash cache is on, and have the blocks this uses subtracted from the length
* of the various regions. The 'data access port' dram/drom regions map to the same iram/irom regions but
* are connected to the data port of the CPU and eg allow byte-wise access.
*/
/* IRAM for PRO CPU. */
iram0_0_seg (RX) : org = SRAM_IRAM_ORG, len = I_D_SRAM_SIZE
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/* Flash mapped instruction data */
iram0_2_seg (RX) : org = 0x42000020, len = (IDRAM0_2_SEG_SIZE >> 1) -0x20
/**
* (0x20 offset above is a convenience for the app binary image generation.
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
* header. Setting this offset makes it simple to meet the flash cache MMU's
* constraint that (paddr % 64KB == vaddr % 64KB).)
*/
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* Shared data RAM, excluding memory reserved for ROM bss/data/stack.
* Enabling Bluetooth & Trace Memory features in menuconfig will decrease the amount of RAM available.
*/
dram0_0_seg (RW) : org = SRAM_DRAM_ORG, len = DRAM0_0_SEG_LEN
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/* Flash mapped constant data */
drom0_0_seg (R) : org = 0x42000020 + (IDRAM0_2_SEG_SIZE >> 1), len = (IDRAM0_2_SEG_SIZE >> 1)-0x20
/* (See iram0_2_seg for meaning of 0x20 offset in the above.) */
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* lp ram memory (RWX). Persists over deep sleep. // ESP32H2-TODO IDF-6272
*/
#if CONFIG_ULP_COPROC_ENABLED
lp_ram_seg(RW) : org = 0x50000000 + CONFIG_ULP_COPROC_RESERVE_MEM,
len = 0x1000 - CONFIG_ULP_COPROC_RESERVE_MEM
#else
lp_ram_seg(RW) : org = 0x50000000 , len = 0x1000
#endif // CONFIG_ULP_COPROC_ENABLED
}
#if CONFIG_ESP32H2_USE_FIXED_STATIC_RAM_SIZE
/* static data ends at defined address */
_static_data_end = 0x40820000 + DRAM0_0_SEG_LEN;
#else
_static_data_end = _bss_end;
#endif // CONFIG_ESP32H2_USE_FIXED_STATIC_RAM_SIZE
/* Heap ends at top of dram0_0_seg */
_heap_end = 0x40000000;
_data_seg_org = ORIGIN(rtc_data_seg);
/**
* The lines below define location alias for .rtc.data section
* As C3 only has RTC fast memory, this is not configurable like on other targets
*/
REGION_ALIAS("rtc_iram_seg", lp_ram_seg );
REGION_ALIAS("rtc_data_seg", rtc_iram_seg );
REGION_ALIAS("rtc_slow_seg", rtc_iram_seg );
REGION_ALIAS("rtc_data_location", rtc_iram_seg );
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_code_seg", iram0_2_seg);
#else
REGION_ALIAS("default_code_seg", iram0_0_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_rodata_seg", drom0_0_seg);
#else
REGION_ALIAS("default_rodata_seg", dram0_0_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* If rodata default segment is placed in `drom0_0_seg`, then flash's first rodata section must
* also be first in the segment.
*/
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
ASSERT(_flash_rodata_dummy_start == ORIGIN(default_rodata_seg),
".flash_rodata_dummy section must be placed at the beginning of the rodata segment.")
#endif
#if CONFIG_ESP_SYSTEM_USE_EH_FRAME
ASSERT ((__eh_frame_end > __eh_frame), "Error: eh_frame size is null!");
ASSERT ((__eh_frame_hdr_end > __eh_frame_hdr), "Error: eh_frame_hdr size is null!");
#endif