alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
4c865baae4
esp-idf/examples/zigbee/light_sample/light_coordinator
History
Anton Maklakov 4c865baae4 managed components: fix version references to allow implicit updates according to semver 
Syntax details: https://devhints.io/semver
2022-03-11 13:49:26 +07:00
..
main managed components: fix version references to allow implicit updates according to semver 2022-03-11 13:49:26 +07:00
CMakeLists.txt Zigbee: Add light example 2021-11-11 19:03:01 +08:00
partitions.csv Zigbee: Add light example 2021-11-11 19:03:01 +08:00
README.md Zigbee example: add rcp and gateway 2022-01-04 17:46:09 +08:00
sdkconfig.defaults Zigbee: Zigbee example update 2022-01-18 17:07:10 +08:00

README.md

Supported Targets ESP32-H2

Light Coordinator Example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This test code shows how to configure Zigbee coordinator device.

Hardware Required

  • One development board with ESP32-H2 SoC acting as Zigbee coordinator (loaded with light coordinator example)
  • A USB cable for power supply and programming
  • Choose another ESP32-H2 as Zigbee router (see light bulb example)
  • Choose another ESP32-H2 as Zigbee end-device (see light switch example)

Configure the project

Before project configuration and build, make sure to set the correct chip target using idf.py set-target esp32h2.

Build and Flash

Build the project, flash it to the board, and start the monitor tool to view the serial output by running idf.py -p PORT flash monitor.

(To exit the serial monitor, type Ctrl-].)

Example Output

As you run the example, you will see the following log:

light coodrinator: I (9556) ESP_ZB_COORDINATOR: status: -1
I (9556) ESP_ZB_COORDINATOR: Zigbee stack initialized
I (9556) ESP_ZB_COORDINATOR: Start network formation
I (10066) ESP_ZB_COORDINATOR: Joined network successfully (Extended PAN ID: f9:54:2d:01:a0:03:f7:84, PAN ID: 0xf5b5)
I (10526) ESP_ZB_COORDINATOR: Network steering started
I (11306) ESP_ZB_COORDINATOR: status: 0
I (11806) ESP_ZB_COORDINATOR: status: 0
I (11886) ESP_ZB_COORDINATOR: New device commissioned or rejoined (short: 0x434a)
I (12386) ESP_ZB_COORDINATOR: status: 0
I (12486) ESP_ZB_COORDINATOR: status: 0
I (12896) ESP_ZB_COORDINATOR: status: 0
I (12946) ESP_ZB_COORDINATOR: New device commissioned or rejoined (short: 0x09c2)
I (13516) ESP_ZB_COORDINATOR: status: 0
I (26686) ESP_ZB_COORDINATOR: status: 0

Light Control Functions

  • By toggling the switch button (BOOT) on the ESP32-H2 board loaded with light switch example, the LED on the board loaded with light bulb example will be on and off.

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.