mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
1546 lines
62 KiB
C
1546 lines
62 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <stdbool.h>
|
|
#include <math.h>
|
|
#include <esp_types.h>
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/semphr.h"
|
|
|
|
#include "soc/lldesc.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/i2s.h"
|
|
#include "hal/gpio_hal.h"
|
|
#include "hal/i2s_hal.h"
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
#include "driver/dac.h"
|
|
#include "adc1_private.h"
|
|
#endif
|
|
|
|
#if SOC_GDMA_SUPPORTED
|
|
#include "esp_private/gdma.h"
|
|
#endif
|
|
|
|
#include "soc/rtc.h"
|
|
|
|
#include "esp_intr_alloc.h"
|
|
#include "esp_err.h"
|
|
#include "esp_check.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_log.h"
|
|
#include "esp_pm.h"
|
|
#include "esp_efuse.h"
|
|
#include "esp_rom_gpio.h"
|
|
#include "esp_private/i2s_platform.h"
|
|
|
|
#include "sdkconfig.h"
|
|
|
|
static const char *TAG = "I2S";
|
|
|
|
#define I2S_ENTER_CRITICAL_ISR(i2s_num) portENTER_CRITICAL_ISR(&i2s_spinlock[i2s_num])
|
|
#define I2S_EXIT_CRITICAL_ISR(i2s_num) portEXIT_CRITICAL_ISR(&i2s_spinlock[i2s_num])
|
|
#define I2S_ENTER_CRITICAL(i2s_num) portENTER_CRITICAL(&i2s_spinlock[i2s_num])
|
|
#define I2S_EXIT_CRITICAL(i2s_num) portEXIT_CRITICAL(&i2s_spinlock[i2s_num])
|
|
#define I2S_FULL_DUPLEX_SLAVE_MODE_MASK (I2S_MODE_TX | I2S_MODE_RX | I2S_MODE_SLAVE)
|
|
#define I2S_FULL_DUPLEX_MASTER_MODE_MASK (I2S_MODE_TX | I2S_MODE_RX | I2S_MODE_MASTER)
|
|
|
|
#if !SOC_GDMA_SUPPORTED
|
|
#define I2S_INTR_IN_SUC_EOF BIT(9)
|
|
#define I2S_INTR_OUT_EOF BIT(12)
|
|
#define I2S_INTR_IN_DSCR_ERR BIT(13)
|
|
#define I2S_INTR_OUT_DSCR_ERR BIT(14)
|
|
#define I2S_INTR_MAX (~0)
|
|
#endif
|
|
|
|
/**
|
|
* @brief DMA buffer object
|
|
*
|
|
*/
|
|
typedef struct {
|
|
char **buf;
|
|
int buf_size;
|
|
int rw_pos;
|
|
void *curr_ptr;
|
|
SemaphoreHandle_t mux;
|
|
xQueueHandle queue;
|
|
lldesc_t **desc;
|
|
} i2s_dma_t;
|
|
|
|
/**
|
|
* @brief I2S object instance
|
|
*
|
|
*/
|
|
typedef struct {
|
|
i2s_port_t i2s_num; /*!< I2S port number*/
|
|
int queue_size; /*!< I2S event queue size*/
|
|
QueueHandle_t i2s_queue; /*!< I2S queue handler*/
|
|
int dma_buf_count; /*!< DMA buffer count, number of buffer*/
|
|
int dma_buf_len; /*!< DMA buffer length, length of each buffer*/
|
|
i2s_dma_t *tx; /*!< DMA Tx buffer*/
|
|
i2s_dma_t *rx; /*!< DMA Rx buffer*/
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_channel_handle_t rx_dma_chan; /*!< I2S rx gDMA channel handle*/
|
|
gdma_channel_handle_t tx_dma_chan; /*!< I2S tx gDMA channel handle*/
|
|
#else
|
|
i2s_isr_handle_t i2s_isr_handle; /*!< I2S Interrupt handle*/
|
|
#endif
|
|
int channel_num; /*!< Number of channels*/
|
|
int bytes_per_sample; /*!< Bytes per sample*/
|
|
int bits_per_sample; /*!< Bits per sample*/
|
|
i2s_comm_format_t communication_format; /*!<communication standard format*/
|
|
i2s_mode_t mode; /*!< I2S Working mode*/
|
|
uint32_t sample_rate; /*!< I2S sample rate */
|
|
bool tx_desc_auto_clear; /*!< I2S auto clear tx descriptor on underflow */
|
|
bool use_apll; /*!< I2S use APLL clock */
|
|
int fixed_mclk; /*!< I2S fixed MLCK clock */
|
|
i2s_mclk_multiple_t mclk_multiple; /*!< The multiple of I2S master clock(MCLK) to sample rate */
|
|
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_handle_t pm_lock;
|
|
#endif
|
|
i2s_hal_context_t hal; /*!< I2S hal context*/
|
|
i2s_hal_config_t hal_cfg; /*!< I2S hal configurations*/
|
|
} i2s_obj_t;
|
|
|
|
static i2s_obj_t *p_i2s[SOC_I2S_NUM];
|
|
static portMUX_TYPE i2s_platform_spinlock = (portMUX_TYPE)portMUX_INITIALIZER_UNLOCKED;
|
|
static portMUX_TYPE i2s_spinlock[SOC_I2S_NUM] = {
|
|
[0 ... SOC_I2S_NUM - 1] = (portMUX_TYPE)portMUX_INITIALIZER_UNLOCKED,
|
|
};
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
static int _i2s_adc_unit = -1;
|
|
static int _i2s_adc_channel = -1;
|
|
#endif
|
|
|
|
static i2s_dma_t *i2s_create_dma_queue(i2s_port_t i2s_num, int dma_buf_count, int dma_buf_len);
|
|
static esp_err_t i2s_destroy_dma_queue(i2s_port_t i2s_num, i2s_dma_t *dma);
|
|
|
|
/**************************************************************
|
|
* I2S GPIO operation *
|
|
* - gpio_matrix_out_check_and_set *
|
|
* - gpio_matrix_in_check_and_set *
|
|
* - i2s_check_set_mclk *
|
|
* - i2s_set_pin *
|
|
**************************************************************/
|
|
static void gpio_matrix_out_check_and_set(int gpio, uint32_t signal_idx, bool out_inv, bool oen_inv)
|
|
{
|
|
//if pin = -1, do not need to configure
|
|
if (gpio != -1) {
|
|
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
|
|
gpio_set_direction(gpio, GPIO_MODE_OUTPUT);
|
|
esp_rom_gpio_connect_out_signal(gpio, signal_idx, out_inv, oen_inv);
|
|
}
|
|
}
|
|
|
|
static void gpio_matrix_in_check_and_set(int gpio, uint32_t signal_idx, bool inv)
|
|
{
|
|
if (gpio != -1) {
|
|
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
|
|
//Set direction, for some GPIOs, the input function are not enabled as default.
|
|
gpio_set_direction(gpio, GPIO_MODE_INPUT);
|
|
esp_rom_gpio_connect_in_signal(gpio, signal_idx, inv);
|
|
}
|
|
}
|
|
|
|
static esp_err_t i2s_check_set_mclk(i2s_port_t i2s_num, gpio_num_t gpio_num)
|
|
{
|
|
if (gpio_num == -1) {
|
|
return ESP_OK;
|
|
}
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
ESP_RETURN_ON_FALSE((gpio_num == GPIO_NUM_0 || gpio_num == GPIO_NUM_1 || gpio_num == GPIO_NUM_3),
|
|
ESP_ERR_INVALID_ARG, TAG,
|
|
"ESP32 only support to set GPIO0/GPIO1/GPIO3 as mclk signal, error GPIO number:%d", gpio_num);
|
|
bool is_i2s0 = i2s_num == I2S_NUM_0;
|
|
if (gpio_num == GPIO_NUM_0) {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO0_U, FUNC_GPIO0_CLK_OUT1);
|
|
WRITE_PERI_REG(PIN_CTRL, is_i2s0 ? 0xFFF0 : 0xFFFF);
|
|
} else if (gpio_num == GPIO_NUM_1) {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD_CLK_OUT3);
|
|
WRITE_PERI_REG(PIN_CTRL, is_i2s0 ? 0xF0F0 : 0xF0FF);
|
|
} else {
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD_CLK_OUT2);
|
|
WRITE_PERI_REG(PIN_CTRL, is_i2s0 ? 0xFF00 : 0xFF0F);
|
|
}
|
|
#else
|
|
ESP_RETURN_ON_FALSE(GPIO_IS_VALID_GPIO(gpio_num), ESP_ERR_INVALID_ARG, TAG, "mck_io_num invalid");
|
|
gpio_matrix_out_check_and_set(gpio_num, i2s_periph_signal[i2s_num].mck_out_sig, 0, 0);
|
|
#endif
|
|
ESP_LOGI(TAG, "I2S%d, MCLK output by GPIO%d", i2s_num, gpio_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_set_pin(i2s_port_t i2s_num, const i2s_pin_config_t *pin)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
if (pin == NULL) {
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
return i2s_set_dac_mode(I2S_DAC_CHANNEL_BOTH_EN);
|
|
#else
|
|
return ESP_ERR_INVALID_ARG;
|
|
#endif
|
|
}
|
|
|
|
ESP_RETURN_ON_FALSE((pin->bck_io_num == -1 || GPIO_IS_VALID_GPIO(pin->bck_io_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "bck_io_num invalid");
|
|
ESP_RETURN_ON_FALSE((pin->ws_io_num == -1 || GPIO_IS_VALID_GPIO(pin->ws_io_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "ws_io_num invalid");
|
|
ESP_RETURN_ON_FALSE((pin->data_out_num == -1 || GPIO_IS_VALID_GPIO(pin->data_out_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "data_out_num invalid");
|
|
ESP_RETURN_ON_FALSE((pin->data_in_num == -1 || GPIO_IS_VALID_GPIO(pin->data_in_num)),
|
|
ESP_ERR_INVALID_ARG, TAG, "data_in_num invalid");
|
|
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_SLAVE) {
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
gpio_matrix_in_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].tx_ws_sig, 0);
|
|
gpio_matrix_in_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].tx_bck_sig, 0);
|
|
} else {
|
|
gpio_matrix_in_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].rx_ws_sig, 0);
|
|
gpio_matrix_in_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].rx_bck_sig, 0);
|
|
}
|
|
} else {
|
|
ESP_RETURN_ON_ERROR(i2s_check_set_mclk(i2s_num, pin->mck_io_num), TAG, "mclk config failed");
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
gpio_matrix_out_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].tx_ws_sig, 0, 0);
|
|
gpio_matrix_out_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].tx_bck_sig, 0, 0);
|
|
} else {
|
|
gpio_matrix_out_check_and_set(pin->ws_io_num, i2s_periph_signal[i2s_num].rx_ws_sig, 0, 0);
|
|
gpio_matrix_out_check_and_set(pin->bck_io_num, i2s_periph_signal[i2s_num].rx_bck_sig, 0, 0);
|
|
}
|
|
}
|
|
|
|
gpio_matrix_out_check_and_set(pin->data_out_num, i2s_periph_signal[i2s_num].data_out_sig, 0, 0);
|
|
gpio_matrix_in_check_and_set(pin->data_in_num, i2s_periph_signal[i2s_num].data_in_sig, 0);
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
/**************************************************************
|
|
* I2S DMA operation *
|
|
* - i2s_dma_rx_callback *
|
|
* - i2s_dma_tx_callback *
|
|
* - i2s_intr_handler_default *
|
|
* - i2s_tx_reset *
|
|
* - i2s_rx_reset *
|
|
* - i2s_tx_start *
|
|
* - i2s_rx_start *
|
|
* - i2s_tx_stop *
|
|
* - i2s_rx_stop *
|
|
**************************************************************/
|
|
|
|
#if SOC_GDMA_SUPPORTED
|
|
static bool IRAM_ATTR i2s_dma_rx_callback(gdma_channel_handle_t dma_chan, gdma_event_data_t *event_data, void *user_data)
|
|
{
|
|
i2s_obj_t *p_i2s = (i2s_obj_t *) user_data;
|
|
portBASE_TYPE high_priority_task_awoken = 0;
|
|
BaseType_t ret = 0;
|
|
int dummy;
|
|
i2s_event_t i2s_event;
|
|
uint32_t finish_desc;
|
|
|
|
if (p_i2s->rx) {
|
|
finish_desc = event_data->rx_eof_desc_addr;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->rx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->rx->queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
ret = xQueueSendFromISR(p_i2s->rx->queue, &(((lldesc_t *)finish_desc)->buf), &high_priority_task_awoken);
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = (ret == pdPASS) ? I2S_EVENT_RX_DONE : I2S_EVENT_RX_Q_OVF;
|
|
if (p_i2s->i2s_queue && xQueueIsQueueFullFromISR(p_i2s->i2s_queue)) {
|
|
xQueueReceiveFromISR(p_i2s->i2s_queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &high_priority_task_awoken);
|
|
}
|
|
}
|
|
return high_priority_task_awoken;
|
|
}
|
|
|
|
static bool IRAM_ATTR i2s_dma_tx_callback(gdma_channel_handle_t dma_chan, gdma_event_data_t *event_data, void *user_data)
|
|
{
|
|
i2s_obj_t *p_i2s = (i2s_obj_t *) user_data;
|
|
portBASE_TYPE high_priority_task_awoken = 0;
|
|
BaseType_t ret;
|
|
int dummy;
|
|
i2s_event_t i2s_event;
|
|
uint32_t finish_desc;
|
|
if (p_i2s->tx) {
|
|
finish_desc = event_data->tx_eof_desc_addr;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->tx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->tx->queue, &dummy, &high_priority_task_awoken);
|
|
if (p_i2s->tx_desc_auto_clear) {
|
|
memset((void *) dummy, 0, p_i2s->tx->buf_size);
|
|
}
|
|
}
|
|
ret = xQueueSendFromISR(p_i2s->tx->queue, &(((lldesc_t *)finish_desc)->buf), &high_priority_task_awoken);
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = (ret == pdPASS) ? I2S_EVENT_TX_DONE : I2S_EVENT_TX_Q_OVF;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->i2s_queue)) {
|
|
xQueueReceiveFromISR(p_i2s->i2s_queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &high_priority_task_awoken);
|
|
}
|
|
}
|
|
return high_priority_task_awoken;
|
|
}
|
|
|
|
#else
|
|
static void IRAM_ATTR i2s_intr_handler_default(void *arg)
|
|
{
|
|
i2s_obj_t *p_i2s = (i2s_obj_t *) arg;
|
|
uint32_t status = i2s_hal_get_intr_status(&(p_i2s->hal));
|
|
if (status == 0) {
|
|
//Avoid spurious interrupt
|
|
return;
|
|
}
|
|
|
|
i2s_event_t i2s_event;
|
|
int dummy;
|
|
portBASE_TYPE high_priority_task_awoken = 0;
|
|
uint32_t finish_desc = 0;
|
|
if ((status & I2S_INTR_OUT_DSCR_ERR) || (status & I2S_INTR_IN_DSCR_ERR)) {
|
|
ESP_EARLY_LOGE(TAG, "dma error, interrupt status: 0x%08x", status);
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_DMA_ERROR;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->i2s_queue)) {
|
|
xQueueReceiveFromISR(p_i2s->i2s_queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &high_priority_task_awoken);
|
|
}
|
|
}
|
|
|
|
if ((status & I2S_INTR_OUT_EOF) && p_i2s->tx) {
|
|
i2s_hal_get_out_eof_des_addr(&(p_i2s->hal), &finish_desc);
|
|
// All buffers are empty. This means we have an underflow on our hands.
|
|
if (xQueueIsQueueFullFromISR(p_i2s->tx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->tx->queue, &dummy, &high_priority_task_awoken);
|
|
// See if tx descriptor needs to be auto cleared:
|
|
// This will avoid any kind of noise that may get introduced due to transmission
|
|
// of previous data from tx descriptor on I2S line.
|
|
if (p_i2s->tx_desc_auto_clear == true) {
|
|
memset((void *) dummy, 0, p_i2s->tx->buf_size);
|
|
}
|
|
}
|
|
xQueueSendFromISR(p_i2s->tx->queue, &(((lldesc_t *)finish_desc)->buf), &high_priority_task_awoken);
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_TX_DONE;
|
|
if (xQueueIsQueueFullFromISR(p_i2s->i2s_queue)) {
|
|
xQueueReceiveFromISR(p_i2s->i2s_queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &high_priority_task_awoken);
|
|
}
|
|
}
|
|
|
|
if ((status & I2S_INTR_IN_SUC_EOF) && p_i2s->rx) {
|
|
// All buffers are full. This means we have an overflow.
|
|
i2s_hal_get_in_eof_des_addr(&(p_i2s->hal), &finish_desc);
|
|
if (xQueueIsQueueFullFromISR(p_i2s->rx->queue)) {
|
|
xQueueReceiveFromISR(p_i2s->rx->queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
xQueueSendFromISR(p_i2s->rx->queue, &(((lldesc_t *)finish_desc)->buf), &high_priority_task_awoken);
|
|
if (p_i2s->i2s_queue) {
|
|
i2s_event.type = I2S_EVENT_RX_DONE;
|
|
if (p_i2s->i2s_queue && xQueueIsQueueFullFromISR(p_i2s->i2s_queue)) {
|
|
xQueueReceiveFromISR(p_i2s->i2s_queue, &dummy, &high_priority_task_awoken);
|
|
}
|
|
xQueueSendFromISR(p_i2s->i2s_queue, (void * )&i2s_event, &high_priority_task_awoken);
|
|
}
|
|
}
|
|
i2s_hal_clear_intr_status(&(p_i2s->hal), status);
|
|
|
|
if (high_priority_task_awoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void i2s_tx_reset(i2s_port_t i2s_num)
|
|
{
|
|
p_i2s[i2s_num]->tx->curr_ptr = NULL;
|
|
p_i2s[i2s_num]->tx->rw_pos = 0;
|
|
#if SOC_GDMA_SUPPORTED
|
|
// gdma_stop(p_i2s[i2s_num]->tx_dma_chan);
|
|
i2s_hal_reset_tx(&(p_i2s[i2s_num]->hal));
|
|
gdma_reset(p_i2s[i2s_num]->tx_dma_chan);
|
|
i2s_hal_reset_tx_fifo(&(p_i2s[i2s_num]->hal));
|
|
#else
|
|
// Reset I2S TX module first, and then, reset DMA and FIFO.
|
|
i2s_hal_reset_tx(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_reset_txdma(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_reset_tx_fifo(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
}
|
|
|
|
static void i2s_rx_reset(i2s_port_t i2s_num)
|
|
{
|
|
p_i2s[i2s_num]->rx->curr_ptr = NULL;
|
|
p_i2s[i2s_num]->rx->rw_pos = 0;
|
|
#if SOC_GDMA_SUPPORTED
|
|
i2s_hal_reset_rx(&(p_i2s[i2s_num]->hal));
|
|
gdma_reset(p_i2s[i2s_num]->rx_dma_chan);
|
|
i2s_hal_reset_rx_fifo(&(p_i2s[i2s_num]->hal));
|
|
#else
|
|
|
|
// Reset I2S RX module first, and then, reset DMA and FIFO.
|
|
i2s_hal_reset_rx(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_reset_rxdma(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_reset_rx_fifo(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
}
|
|
|
|
static void i2s_tx_start(i2s_port_t i2s_num)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_start(p_i2s[i2s_num]->tx_dma_chan, (uint32_t) p_i2s[i2s_num]->tx->desc[0]);
|
|
#else
|
|
i2s_hal_enable_tx_dma(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_enable_tx_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_start_tx_link(&(p_i2s[i2s_num]->hal), (uint32_t) p_i2s[i2s_num]->tx->desc[0]);
|
|
#endif
|
|
i2s_hal_start_tx(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
|
|
static void i2s_rx_start(i2s_port_t i2s_num)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_start(p_i2s[i2s_num]->rx_dma_chan, (uint32_t) p_i2s[i2s_num]->rx->desc[0]);
|
|
#else
|
|
i2s_hal_enable_rx_dma(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_enable_rx_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_start_rx_link(&(p_i2s[i2s_num]->hal), (uint32_t) p_i2s[i2s_num]->rx->desc[0]);
|
|
#endif
|
|
i2s_hal_start_rx(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
|
|
static void i2s_tx_stop(i2s_port_t i2s_num)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_stop(p_i2s[i2s_num]->tx_dma_chan);
|
|
#else
|
|
i2s_hal_stop_tx_link(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_stop_tx(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_disable_tx_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_disable_tx_dma(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
}
|
|
|
|
static void i2s_rx_stop(i2s_port_t i2s_num)
|
|
{
|
|
#if SOC_GDMA_SUPPORTED
|
|
gdma_stop(p_i2s[i2s_num]->rx_dma_chan);
|
|
#else
|
|
i2s_hal_stop_rx_link(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_stop_rx(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_disable_rx_intr(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_disable_rx_dma(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
}
|
|
|
|
/**************************************************************
|
|
* I2S buffer operation *
|
|
* - i2s_alloc_dma_buffer *
|
|
* - i2s_destroy_dma_queue *
|
|
* - i2s_create_dma_queue *
|
|
* - i2s_zero_dma_buffer *
|
|
**************************************************************/
|
|
static esp_err_t i2s_alloc_dma_buffer(i2s_port_t i2s_num, int data_bits, int ch)
|
|
{
|
|
if (p_i2s[i2s_num]->channel_num != ch) {
|
|
p_i2s[i2s_num]->channel_num = (ch == 2) ? 2 : 1;
|
|
}
|
|
|
|
i2s_dma_t *save_tx = NULL, *save_rx = NULL;
|
|
|
|
if (data_bits != p_i2s[i2s_num]->bits_per_sample) {
|
|
p_i2s[i2s_num]->bits_per_sample = data_bits;
|
|
|
|
// Round bytes_per_sample up to next multiple of 16 bits
|
|
int halfwords_per_sample = (data_bits + 15) / 16;
|
|
p_i2s[i2s_num]->bytes_per_sample = halfwords_per_sample * 2;
|
|
|
|
// Because limited of DMA buffer is 4092 bytes
|
|
if (p_i2s[i2s_num]->dma_buf_len * p_i2s[i2s_num]->bytes_per_sample * p_i2s[i2s_num]->channel_num > 4092) {
|
|
p_i2s[i2s_num]->dma_buf_len = 4092 / p_i2s[i2s_num]->bytes_per_sample / p_i2s[i2s_num]->channel_num;
|
|
}
|
|
|
|
// Re-create TX DMA buffer
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
save_tx = p_i2s[i2s_num]->tx;
|
|
//destroy old tx dma if exist
|
|
if (save_tx) {
|
|
i2s_destroy_dma_queue(i2s_num, save_tx);
|
|
}
|
|
p_i2s[i2s_num]->tx = i2s_create_dma_queue(i2s_num, p_i2s[i2s_num]->dma_buf_count, p_i2s[i2s_num]->dma_buf_len);
|
|
if (p_i2s[i2s_num]->tx == NULL) {
|
|
ESP_LOGE(TAG, "Failed to create tx dma buffer");
|
|
i2s_driver_uninstall(i2s_num);
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
}
|
|
// Re-create RX DMA buffer
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
save_rx = p_i2s[i2s_num]->rx;
|
|
//destroy old rx dma if exist
|
|
if (save_rx) {
|
|
i2s_destroy_dma_queue(i2s_num, save_rx);
|
|
}
|
|
p_i2s[i2s_num]->rx = i2s_create_dma_queue(i2s_num, p_i2s[i2s_num]->dma_buf_count, p_i2s[i2s_num]->dma_buf_len);
|
|
if (p_i2s[i2s_num]->rx == NULL) {
|
|
ESP_LOGE(TAG, "Failed to create rx dma buffer");
|
|
i2s_driver_uninstall(i2s_num);
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
i2s_hal_set_rx_eof_num(&(p_i2s[i2s_num]->hal), p_i2s[i2s_num]->dma_buf_len * p_i2s[i2s_num]->channel_num * p_i2s[i2s_num]->bytes_per_sample);
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_destroy_dma_queue(i2s_port_t i2s_num, i2s_dma_t *dma)
|
|
{
|
|
int bux_idx;
|
|
if (p_i2s[i2s_num] == NULL) {
|
|
ESP_LOGE(TAG, "Not initialized yet");
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if (dma == NULL) {
|
|
ESP_LOGE(TAG, "dma is NULL");
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
for (bux_idx = 0; bux_idx < p_i2s[i2s_num]->dma_buf_count; bux_idx++) {
|
|
if (dma->desc && dma->desc[bux_idx]) {
|
|
free(dma->desc[bux_idx]);
|
|
}
|
|
if (dma->buf && dma->buf[bux_idx]) {
|
|
free(dma->buf[bux_idx]);
|
|
}
|
|
}
|
|
if (dma->buf) {
|
|
free(dma->buf);
|
|
}
|
|
if (dma->desc) {
|
|
free(dma->desc);
|
|
}
|
|
ESP_LOGI(TAG, "DMA queue destroyed");
|
|
vQueueDelete(dma->queue);
|
|
vSemaphoreDelete(dma->mux);
|
|
free(dma);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static i2s_dma_t *i2s_create_dma_queue(i2s_port_t i2s_num, int dma_buf_count, int dma_buf_len)
|
|
{
|
|
int bux_idx;
|
|
int sample_size = p_i2s[i2s_num]->bytes_per_sample * p_i2s[i2s_num]->channel_num;
|
|
i2s_dma_t *dma = (i2s_dma_t *) malloc(sizeof(i2s_dma_t));
|
|
if (dma == NULL) {
|
|
ESP_LOGE(TAG, "Error malloc i2s_dma_t");
|
|
return NULL;
|
|
}
|
|
memset(dma, 0, sizeof(i2s_dma_t));
|
|
|
|
dma->buf = (char **)malloc(sizeof(char *) * dma_buf_count);
|
|
if (dma->buf == NULL) {
|
|
ESP_LOGE(TAG, "Error malloc dma buffer pointer");
|
|
free(dma);
|
|
return NULL;
|
|
}
|
|
memset(dma->buf, 0, sizeof(char *) * dma_buf_count);
|
|
|
|
for (bux_idx = 0; bux_idx < dma_buf_count; bux_idx++) {
|
|
dma->buf[bux_idx] = (char *) heap_caps_calloc(1, dma_buf_len * sample_size, MALLOC_CAP_DMA);
|
|
if (dma->buf[bux_idx] == NULL) {
|
|
ESP_LOGE(TAG, "Error malloc dma buffer");
|
|
i2s_destroy_dma_queue(i2s_num, dma);
|
|
return NULL;
|
|
}
|
|
ESP_LOGD(TAG, "Addr[%d] = %d", bux_idx, (int)dma->buf[bux_idx]);
|
|
}
|
|
|
|
dma->desc = (lldesc_t **) malloc(sizeof(lldesc_t *) * dma_buf_count);
|
|
if (dma->desc == NULL) {
|
|
ESP_LOGE(TAG, "Error malloc dma description");
|
|
i2s_destroy_dma_queue(i2s_num, dma);
|
|
return NULL;
|
|
}
|
|
for (bux_idx = 0; bux_idx < dma_buf_count; bux_idx++) {
|
|
dma->desc[bux_idx] = (lldesc_t *) heap_caps_malloc(sizeof(lldesc_t), MALLOC_CAP_DMA);
|
|
if (dma->desc[bux_idx] == NULL) {
|
|
ESP_LOGE(TAG, "Error malloc dma description entry");
|
|
i2s_destroy_dma_queue(i2s_num, dma);
|
|
return NULL;
|
|
}
|
|
}
|
|
for (bux_idx = 0; bux_idx < dma_buf_count; bux_idx++) {
|
|
dma->desc[bux_idx]->owner = 1;
|
|
dma->desc[bux_idx]->eof = 1;
|
|
dma->desc[bux_idx]->sosf = 0;
|
|
dma->desc[bux_idx]->length = dma_buf_len * sample_size;
|
|
dma->desc[bux_idx]->size = dma_buf_len * sample_size;
|
|
dma->desc[bux_idx]->buf = (uint8_t *) dma->buf[bux_idx];
|
|
dma->desc[bux_idx]->offset = 0;
|
|
dma->desc[bux_idx]->empty = (uint32_t)((bux_idx < (dma_buf_count - 1)) ? (dma->desc[bux_idx + 1]) : dma->desc[0]);
|
|
}
|
|
dma->queue = xQueueCreate(dma_buf_count - 1, sizeof(char *));
|
|
dma->mux = xSemaphoreCreateMutex();
|
|
dma->buf_size = dma_buf_len * sample_size;
|
|
ESP_LOGI(TAG, "DMA Malloc info, datalen=blocksize=%d, dma_buf_count=%d", dma_buf_len * sample_size, dma_buf_count);
|
|
return dma;
|
|
}
|
|
|
|
esp_err_t i2s_zero_dma_buffer(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
if (p_i2s[i2s_num]->rx && p_i2s[i2s_num]->rx->buf != NULL && p_i2s[i2s_num]->rx->buf_size != 0) {
|
|
for (int i = 0; i < p_i2s[i2s_num]->dma_buf_count; i++) {
|
|
memset(p_i2s[i2s_num]->rx->buf[i], 0, p_i2s[i2s_num]->rx->buf_size);
|
|
}
|
|
}
|
|
if (p_i2s[i2s_num]->tx && p_i2s[i2s_num]->tx->buf != NULL && p_i2s[i2s_num]->tx->buf_size != 0) {
|
|
int bytes_left = 0;
|
|
bytes_left = (p_i2s[i2s_num]->tx->buf_size - p_i2s[i2s_num]->tx->rw_pos) % 4;
|
|
if (bytes_left) {
|
|
size_t zero_bytes = 0, bytes_written;
|
|
i2s_write(i2s_num, (void *)&zero_bytes, bytes_left, &bytes_written, portMAX_DELAY);
|
|
}
|
|
for (int i = 0; i < p_i2s[i2s_num]->dma_buf_count; i++) {
|
|
memset(p_i2s[i2s_num]->tx->buf[i], 0, p_i2s[i2s_num]->tx->buf_size);
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
/**************************************************************
|
|
* I2S clock operation *
|
|
* - i2s_get_clk *
|
|
* - i2s_apll_get_fi2s *
|
|
* - i2s_apll_calculate_fi2s *
|
|
* - i2s_fbclk_cal *
|
|
**************************************************************/
|
|
|
|
float i2s_get_clk(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
return (float)p_i2s[i2s_num]->sample_rate;
|
|
}
|
|
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
static float i2s_apll_get_fi2s(int bits_per_sample, int sdm0, int sdm1, int sdm2, int odir)
|
|
{
|
|
int f_xtal = (int)rtc_clk_xtal_freq_get() * 1000000;
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
/* ESP32 rev0 silicon issue for APLL range/accuracy, please see ESP32 ECO document for more information on this */
|
|
if (esp_efuse_get_chip_ver() == 0) {
|
|
sdm0 = 0;
|
|
sdm1 = 0;
|
|
}
|
|
#endif
|
|
float fout = f_xtal * (sdm2 + sdm1 / 256.0f + sdm0 / 65536.0f + 4);
|
|
if (fout < SOC_I2S_APLL_MIN_FREQ || fout > SOC_I2S_APLL_MAX_FREQ) {
|
|
return SOC_I2S_APLL_MAX_FREQ;
|
|
}
|
|
float fpll = fout / (2 * (odir + 2)); //== fi2s (N=1, b=0, a=1)
|
|
return fpll / 2;
|
|
}
|
|
|
|
/**
|
|
* @brief APLL calculate function, was described by following:
|
|
* APLL Output frequency is given by the formula:
|
|
*
|
|
* apll_freq = xtal_freq * (4 + sdm2 + sdm1/256 + sdm0/65536)/((o_div + 2) * 2)
|
|
* apll_freq = fout / ((o_div + 2) * 2)
|
|
*
|
|
* The dividend in this expression should be in the range of 240 - 600 MHz.
|
|
* In rev. 0 of ESP32, sdm0 and sdm1 are unused and always set to 0.
|
|
* * sdm0 frequency adjustment parameter, 0..255
|
|
* * sdm1 frequency adjustment parameter, 0..255
|
|
* * sdm2 frequency adjustment parameter, 0..63
|
|
* * o_div frequency divider, 0..31
|
|
*
|
|
* The most accurate way to find the sdm0..2 and odir parameters is to loop through them all,
|
|
* then apply the above formula, finding the closest frequency to the desired one.
|
|
* But 256*256*64*32 = 134.217.728 loops are too slow with ESP32
|
|
* 1. We will choose the parameters with the highest level of change,
|
|
* With 350MHz<fout<500MHz, we limit the sdm2 from 4 to 9,
|
|
* Take average frequency close to the desired frequency, and select sdm2
|
|
* 2. Next, we look for sequences of less influential and more detailed parameters,
|
|
* also by taking the average of the largest and smallest frequencies closer to the desired frequency.
|
|
* 3. And finally, loop through all the most detailed of the parameters, finding the best desired frequency
|
|
*
|
|
* @param[in] rate The I2S Frequency (MCLK)
|
|
* @param[in] bits_per_sample The bits per sample
|
|
* @param[out] sdm0 The sdm 0
|
|
* @param[out] sdm1 The sdm 1
|
|
* @param[out] sdm2 The sdm 2
|
|
* @param[out] odir The odir
|
|
*
|
|
* @return ESP_ERR_INVALID_ARG or ESP_OK
|
|
*/
|
|
static esp_err_t i2s_apll_calculate_fi2s(int rate, int bits_per_sample, int *sdm0, int *sdm1, int *sdm2, int *odir)
|
|
{
|
|
int _odir, _sdm0, _sdm1, _sdm2;
|
|
float avg;
|
|
float min_rate, max_rate, min_diff;
|
|
if (rate / bits_per_sample / 2 / 8 < SOC_I2S_APLL_MIN_RATE) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
*sdm0 = 0;
|
|
*sdm1 = 0;
|
|
*sdm2 = 0;
|
|
*odir = 0;
|
|
min_diff = SOC_I2S_APLL_MAX_FREQ;
|
|
|
|
for (_sdm2 = 4; _sdm2 < 9; _sdm2 ++) {
|
|
max_rate = i2s_apll_get_fi2s(bits_per_sample, 255, 255, _sdm2, 0);
|
|
min_rate = i2s_apll_get_fi2s(bits_per_sample, 0, 0, _sdm2, 31);
|
|
avg = (max_rate + min_rate) / 2;
|
|
if (abs(avg - rate) < min_diff) {
|
|
min_diff = abs(avg - rate);
|
|
*sdm2 = _sdm2;
|
|
}
|
|
}
|
|
min_diff = SOC_I2S_APLL_MAX_FREQ;
|
|
for (_odir = 0; _odir < 32; _odir ++) {
|
|
max_rate = i2s_apll_get_fi2s(bits_per_sample, 255, 255, *sdm2, _odir);
|
|
min_rate = i2s_apll_get_fi2s(bits_per_sample, 0, 0, *sdm2, _odir);
|
|
avg = (max_rate + min_rate) / 2;
|
|
if (abs(avg - rate) < min_diff) {
|
|
min_diff = abs(avg - rate);
|
|
*odir = _odir;
|
|
}
|
|
}
|
|
min_diff = SOC_I2S_APLL_MAX_FREQ;
|
|
for (_sdm2 = 4; _sdm2 < 9; _sdm2 ++) {
|
|
max_rate = i2s_apll_get_fi2s(bits_per_sample, 255, 255, _sdm2, *odir);
|
|
min_rate = i2s_apll_get_fi2s(bits_per_sample, 0, 0, _sdm2, *odir);
|
|
avg = (max_rate + min_rate) / 2;
|
|
if (abs(avg - rate) < min_diff) {
|
|
min_diff = abs(avg - rate);
|
|
*sdm2 = _sdm2;
|
|
}
|
|
}
|
|
|
|
min_diff = SOC_I2S_APLL_MAX_FREQ;
|
|
for (_sdm1 = 0; _sdm1 < 256; _sdm1 ++) {
|
|
max_rate = i2s_apll_get_fi2s(bits_per_sample, 255, _sdm1, *sdm2, *odir);
|
|
min_rate = i2s_apll_get_fi2s(bits_per_sample, 0, _sdm1, *sdm2, *odir);
|
|
avg = (max_rate + min_rate) / 2;
|
|
if (abs(avg - rate) < min_diff) {
|
|
min_diff = abs(avg - rate);
|
|
*sdm1 = _sdm1;
|
|
}
|
|
}
|
|
|
|
min_diff = SOC_I2S_APLL_MAX_FREQ;
|
|
for (_sdm0 = 0; _sdm0 < 256; _sdm0 ++) {
|
|
avg = i2s_apll_get_fi2s(bits_per_sample, _sdm0, *sdm1, *sdm2, *odir);
|
|
if (abs(avg - rate) < min_diff) {
|
|
min_diff = abs(avg - rate);
|
|
*sdm0 = _sdm0;
|
|
}
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
#endif
|
|
|
|
static esp_err_t i2s_fbclk_cal(int i2s_num, uint32_t rate, int channel, int channel_bit, uint32_t *sclk, uint32_t *fbck, uint32_t *bck_div)
|
|
{
|
|
//Default select I2S_D2CLK (160M)
|
|
uint32_t _sclk = I2S_LL_BASE_CLK;
|
|
uint32_t _fbck = rate * channel * channel_bit;
|
|
i2s_mclk_multiple_t multi = p_i2s[i2s_num]->mclk_multiple ? p_i2s[i2s_num]->mclk_multiple : I2S_MCLK_MULTIPLE_256;
|
|
uint32_t _bck_div = rate * multi / _fbck;
|
|
i2s_clock_src_t clk_src = I2S_CLK_D2CLK;
|
|
|
|
//ADC mode only support on ESP32,
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ( p_i2s[i2s_num]->mode & (I2S_MODE_DAC_BUILT_IN | I2S_MODE_ADC_BUILT_IN)) {
|
|
_fbck = rate * I2S_LL_AD_BCK_FACTOR * 2;
|
|
_bck_div = I2S_LL_AD_BCK_FACTOR;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_ADC_DAC
|
|
|
|
if ( p_i2s[i2s_num]->mode & I2S_MODE_PDM) {
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
if ( p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
int fp = i2s_hal_get_tx_pdm_fp(&(p_i2s[i2s_num]->hal));
|
|
int fs = i2s_hal_get_tx_pdm_fs(&(p_i2s[i2s_num]->hal));
|
|
_fbck = rate * I2S_LL_PDM_BCK_FACTOR * fp / fs;
|
|
}
|
|
#endif //SOC_I2S_SUPPORTS_PDM_TX
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
if ( p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
i2s_pdm_dsr_t dsr;
|
|
i2s_hal_get_rx_pdm_dsr(&(p_i2s[i2s_num]->hal), &dsr);
|
|
_fbck = rate * I2S_LL_PDM_BCK_FACTOR * (dsr == I2S_PDM_DSR_16S ? 2 : 1);
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_PDM_RX
|
|
_bck_div = 8;
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
int sdm0 = 0;
|
|
int sdm1 = 0;
|
|
int sdm2 = 0;
|
|
int odir = 0;
|
|
//If APLL is specified, try to calculate in APLL
|
|
if (p_i2s[i2s_num]->use_apll && i2s_apll_calculate_fi2s(p_i2s[i2s_num]->fixed_mclk, channel_bit, &sdm0, &sdm1, &sdm2, &odir) == ESP_OK) {
|
|
_sclk = p_i2s[i2s_num]->fixed_mclk;
|
|
clk_src = I2S_CLK_APLL;
|
|
ESP_LOGD(TAG, "sdm0=%d, sdm1=%d, sdm2=%d, odir=%d", sdm0, sdm1, sdm2, odir);
|
|
rtc_clk_apll_enable(1, sdm0, sdm1, sdm2, odir);
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
if ((_fbck * _bck_div) > _sclk) {
|
|
ESP_LOGE(TAG, "sample rate is too large\r\n");
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
i2s_hal_set_clock_src(&(p_i2s[i2s_num]->hal), clk_src);
|
|
*sclk = _sclk;
|
|
*fbck = _fbck;
|
|
*bck_div = _bck_div;
|
|
return ESP_OK;
|
|
}
|
|
|
|
/**************************************************************
|
|
* I2S configuration *
|
|
* - i2s_get_active_chan_num *
|
|
* - i2s_set_dac_mode *
|
|
* - _i2s_adc_mode_recover *
|
|
* - i2s_set_adc_mode *
|
|
* - i2s_adc_enable *
|
|
* - i2s_adc_disable *
|
|
* - i2s_set_sample_rates *
|
|
* - i2s_pcm_config *
|
|
* - i2s_set_pdm_rx_down_sample *
|
|
* - i2s_set_pdm_tx_up_sample *
|
|
* - i2s_check_cfg_static *
|
|
* - i2s_param_config *
|
|
* - i2s_set_clk *
|
|
* - i2s_set_mode *
|
|
**************************************************************/
|
|
|
|
static uint32_t i2s_get_active_chan_num(i2s_hal_config_t *hal_cfg)
|
|
{
|
|
switch (hal_cfg->chan_fmt) {
|
|
case I2S_CHANNEL_FMT_RIGHT_LEFT: //fall through
|
|
case I2S_CHANNEL_FMT_ALL_RIGHT: //fall through
|
|
case I2S_CHANNEL_FMT_ALL_LEFT:
|
|
return 2;
|
|
case I2S_CHANNEL_FMT_ONLY_RIGHT: //fall through
|
|
case I2S_CHANNEL_FMT_ONLY_LEFT:
|
|
return 1;
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
case I2S_CHANNEL_FMT_MULTIPLE: {
|
|
uint32_t num = 0;
|
|
uint32_t max_chan = 0;
|
|
uint32_t chan_mask = hal_cfg->chan_mask;
|
|
|
|
for (int i = 0; chan_mask && i < 16; i++, chan_mask >>= 1) {
|
|
if ((chan_mask & 0x01) == 1) {
|
|
num++;
|
|
max_chan = i + 1;
|
|
}
|
|
}
|
|
if (max_chan > hal_cfg->total_chan) {
|
|
hal_cfg->total_chan = max_chan;
|
|
}
|
|
return num;
|
|
}
|
|
#endif
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
esp_err_t i2s_set_dac_mode(i2s_dac_mode_t dac_mode)
|
|
{
|
|
ESP_RETURN_ON_FALSE((dac_mode < I2S_DAC_CHANNEL_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s dac mode error");
|
|
if (dac_mode == I2S_DAC_CHANNEL_DISABLE) {
|
|
dac_output_disable(DAC_CHANNEL_1);
|
|
dac_output_disable(DAC_CHANNEL_2);
|
|
dac_i2s_disable();
|
|
} else {
|
|
dac_i2s_enable();
|
|
}
|
|
|
|
if (dac_mode & I2S_DAC_CHANNEL_RIGHT_EN) {
|
|
//DAC1, right channel
|
|
dac_output_enable(DAC_CHANNEL_1);
|
|
}
|
|
if (dac_mode & I2S_DAC_CHANNEL_LEFT_EN) {
|
|
//DAC2, left channel
|
|
dac_output_enable(DAC_CHANNEL_2);
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t _i2s_adc_mode_recover(void)
|
|
{
|
|
ESP_RETURN_ON_FALSE(((_i2s_adc_unit != -1) && (_i2s_adc_channel != -1)), ESP_ERR_INVALID_ARG, TAG, "i2s ADC recover error, not initialized...");
|
|
return adc_i2s_mode_init(_i2s_adc_unit, _i2s_adc_channel);
|
|
}
|
|
|
|
esp_err_t i2s_set_adc_mode(adc_unit_t adc_unit, adc1_channel_t adc_channel)
|
|
{
|
|
ESP_RETURN_ON_FALSE((adc_unit < ADC_UNIT_2), ESP_ERR_INVALID_ARG, TAG, "i2s ADC unit error, only support ADC1 for now");
|
|
// For now, we only support SAR ADC1.
|
|
_i2s_adc_unit = adc_unit;
|
|
_i2s_adc_channel = adc_channel;
|
|
return adc_i2s_mode_init(adc_unit, adc_channel);
|
|
}
|
|
|
|
esp_err_t i2s_adc_enable(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num] != NULL), ESP_ERR_INVALID_STATE, TAG, "Not initialized yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->mode & I2S_MODE_ADC_BUILT_IN), ESP_ERR_INVALID_STATE, TAG, "i2s built-in adc not enabled");
|
|
|
|
adc1_dma_mode_acquire();
|
|
_i2s_adc_mode_recover();
|
|
i2s_rx_reset(i2s_num);
|
|
return i2s_set_clk(i2s_num, p_i2s[i2s_num]->sample_rate, p_i2s[i2s_num]->bits_per_sample, p_i2s[i2s_num]->channel_num);
|
|
}
|
|
|
|
esp_err_t i2s_adc_disable(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num] != NULL), ESP_ERR_INVALID_STATE, TAG, "Not initialized yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->mode & I2S_MODE_ADC_BUILT_IN), ESP_ERR_INVALID_STATE, TAG, "i2s built-in adc not enabled");
|
|
|
|
i2s_hal_stop_rx(&(p_i2s[i2s_num]->hal));
|
|
adc1_lock_release();
|
|
return ESP_OK;
|
|
}
|
|
#endif
|
|
|
|
|
|
esp_err_t i2s_set_sample_rates(i2s_port_t i2s_num, uint32_t rate)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->bytes_per_sample > 0), ESP_ERR_INVALID_ARG, TAG, "bits_per_sample not set");
|
|
return i2s_set_clk(i2s_num, rate, p_i2s[i2s_num]->bits_per_sample, p_i2s[i2s_num]->channel_num);
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_PCM
|
|
esp_err_t i2s_pcm_config(i2s_port_t i2s_num, const i2s_pcm_cfg_t *pcm_cfg)
|
|
{
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_FAIL, TAG, "i2s has not installed yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->communication_format & I2S_COMM_FORMAT_STAND_PCM_SHORT),
|
|
ESP_ERR_INVALID_ARG, TAG, "i2s communication mode is not PCM mode");
|
|
i2s_stop(i2s_num);
|
|
I2S_ENTER_CRITICAL(i2s_num);
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
i2s_hal_tx_pcm_cfg(&(p_i2s[i2s_num]->hal), pcm_cfg->pcm_type);
|
|
} else if (p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
i2s_hal_rx_pcm_cfg(&(p_i2s[i2s_num]->hal), pcm_cfg->pcm_type);
|
|
}
|
|
I2S_EXIT_CRITICAL(i2s_num);
|
|
i2s_start(i2s_num);
|
|
return ESP_OK;
|
|
}
|
|
#endif
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
esp_err_t i2s_set_pdm_rx_down_sample(i2s_port_t i2s_num, i2s_pdm_dsr_t downsample)
|
|
{
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_FAIL, TAG, "i2s has not installed yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->mode & I2S_MODE_PDM), ESP_ERR_INVALID_ARG, TAG, "i2s mode is not PDM mode");
|
|
i2s_stop(i2s_num);
|
|
i2s_hal_set_rx_pdm_dsr(&(p_i2s[i2s_num]->hal), downsample);
|
|
// i2s will start in 'i2s_set_clk'
|
|
return i2s_set_clk(i2s_num, p_i2s[i2s_num]->sample_rate, p_i2s[i2s_num]->bits_per_sample, p_i2s[i2s_num]->channel_num);
|
|
}
|
|
#endif
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
esp_err_t i2s_set_pdm_tx_up_sample(i2s_port_t i2s_num, const i2s_pdm_tx_upsample_cfg_t *upsample_cfg)
|
|
{
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_FAIL, TAG, "i2s has not installed yet");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->mode & I2S_MODE_PDM), ESP_ERR_INVALID_ARG, TAG, "i2s mode is not PDM mode");
|
|
i2s_stop(i2s_num);
|
|
i2s_hal_set_tx_pdm_fpfs(&(p_i2s[i2s_num]->hal), upsample_cfg->fp, upsample_cfg->fs);
|
|
// i2s will start in 'i2s_set_clk'
|
|
return i2s_set_clk(i2s_num, upsample_cfg->sample_rate, p_i2s[i2s_num]->bits_per_sample, p_i2s[i2s_num]->channel_num);
|
|
}
|
|
#endif
|
|
|
|
static esp_err_t i2s_check_cfg_static(i2s_port_t i2s_num)
|
|
{
|
|
i2s_hal_config_t *cfg = &p_i2s[i2s_num]->hal_cfg;
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
//We only check if the I2S number is invalid when set to build in ADC and DAC mode.
|
|
ESP_RETURN_ON_FALSE(!((cfg->mode & I2S_MODE_ADC_BUILT_IN) && (i2s_num != I2S_NUM_0)), ESP_ERR_INVALID_ARG, TAG, "I2S ADC built-in only support on I2S0");
|
|
ESP_RETURN_ON_FALSE(!((cfg->mode & I2S_MODE_DAC_BUILT_IN) && (i2s_num != I2S_NUM_0)), ESP_ERR_INVALID_ARG, TAG, "I2S DAC built-in only support on I2S0");
|
|
return ESP_OK;
|
|
#endif
|
|
//We only check if the I2S number is invalid when set to PDM mode.
|
|
ESP_RETURN_ON_FALSE(!((cfg->mode & I2S_MODE_PDM) && (i2s_num != I2S_NUM_0)), ESP_ERR_INVALID_ARG, TAG, "I2S DAC PDM only support on I2S0");
|
|
return ESP_OK;
|
|
|
|
ESP_RETURN_ON_FALSE(cfg->comm_fmt && (cfg->comm_fmt < I2S_COMM_FORMAT_STAND_MAX), ESP_ERR_INVALID_ARG, TAG, "invalid communication formats");
|
|
ESP_RETURN_ON_FALSE(!((cfg->comm_fmt & I2S_COMM_FORMAT_STAND_MSB) && (cfg->comm_fmt & I2S_COMM_FORMAT_STAND_PCM_LONG)), ESP_ERR_INVALID_ARG, TAG, "multiple communication formats specified");
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_param_config(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((i2s_check_cfg_static(i2s_num) == ESP_OK), ESP_ERR_INVALID_ARG, TAG, "param check error");
|
|
|
|
i2s_hal_config_t *cfg = &p_i2s[i2s_num]->hal_cfg;
|
|
p_i2s[i2s_num]->communication_format = cfg->comm_fmt;
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
if ((cfg->mode & I2S_MODE_DAC_BUILT_IN) || (cfg->mode & I2S_MODE_ADC_BUILT_IN)) {
|
|
if (cfg->mode & I2S_MODE_DAC_BUILT_IN) {
|
|
i2s_hal_enable_builtin_dac(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
if (cfg->mode & I2S_MODE_ADC_BUILT_IN) {
|
|
//in ADC built-in mode, we need to call i2s_set_adc_mode to
|
|
//initialize the specific ADC channel.
|
|
//in the current stage, we only support ADC1 and single channel mode.
|
|
//In default data mode, the ADC data is in 12-bit resolution mode.
|
|
adc_power_acquire();
|
|
i2s_hal_enable_builtin_adc(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
} else {
|
|
i2s_hal_disable_builtin_dac(&(p_i2s[i2s_num]->hal));
|
|
i2s_hal_disable_builtin_adc(&(p_i2s[i2s_num]->hal));
|
|
#endif
|
|
// configure I2S data port interface.
|
|
i2s_hal_config_param(&(p_i2s[i2s_num]->hal), cfg);
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
}
|
|
#endif
|
|
if ((p_i2s[i2s_num]->mode & I2S_MODE_RX) && (p_i2s[i2s_num]->mode & I2S_MODE_TX)) {
|
|
i2s_hal_enable_sig_loopback(&(p_i2s[i2s_num]->hal));
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_MASTER) {
|
|
i2s_hal_enable_master_fd_mode(&(p_i2s[i2s_num]->hal));
|
|
} else {
|
|
i2s_hal_enable_slave_fd_mode(&(p_i2s[i2s_num]->hal));
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_set_clk(i2s_port_t i2s_num, uint32_t rate, uint32_t bits_cfg, i2s_channel_t ch)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num] != NULL), ESP_ERR_INVALID_ARG, TAG, "Not initialized yet");
|
|
|
|
i2s_hal_config_t *cfg = &p_i2s[i2s_num]->hal_cfg;
|
|
int data_bits = 0;
|
|
int chan_bits = 0;
|
|
int active_chan_num = 0;
|
|
int chan_num = 0;
|
|
|
|
cfg->ch = ch;
|
|
cfg->sample_rate = rate;
|
|
cfg->bits_cfg.val = bits_cfg;
|
|
|
|
cfg->bits_cfg.chan_bits = cfg->bits_cfg.chan_bits < cfg->bits_cfg.sample_bits ?
|
|
cfg->bits_cfg.sample_bits : cfg->bits_cfg.chan_bits;
|
|
chan_bits = cfg->bits_cfg.chan_bits;
|
|
data_bits = cfg->bits_cfg.sample_bits;
|
|
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
cfg->chan_mask = ch & 0xFFFF;
|
|
active_chan_num = i2s_get_active_chan_num(cfg);
|
|
chan_num = cfg->total_chan;
|
|
#else
|
|
active_chan_num = i2s_get_active_chan_num(cfg);
|
|
chan_num = ch == I2S_CHANNEL_MONO ? 2 : active_chan_num;
|
|
#endif
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
|
|
if ((data_bits % 8 != 0) || (data_bits > I2S_BITS_PER_SAMPLE_32BIT)) {
|
|
ESP_LOGE(TAG, "Invalid bits per sample");
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
//Stop I2S
|
|
i2s_stop(i2s_num);
|
|
// wait all on-going writing finish
|
|
if ((p_i2s[i2s_num]->mode & I2S_MODE_TX) && p_i2s[i2s_num]->tx) {
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, (portTickType)portMAX_DELAY);
|
|
}
|
|
if ((p_i2s[i2s_num]->mode & I2S_MODE_RX) && p_i2s[i2s_num]->rx) {
|
|
xSemaphoreTake(p_i2s[i2s_num]->rx->mux, (portTickType)portMAX_DELAY);
|
|
}
|
|
//malloc DMA buffer
|
|
if (i2s_alloc_dma_buffer(i2s_num, data_bits, active_chan_num) != ESP_OK ) {
|
|
return ESP_ERR_NO_MEM;
|
|
}
|
|
|
|
uint32_t i2s_clk = 0; // I2S source clock
|
|
uint32_t i2s_bck = 0; // I2S back clock
|
|
uint32_t bck_div = 0; // I2S bck div
|
|
//calculate bck_div, f_bck and select source clock
|
|
if (i2s_fbclk_cal(i2s_num, rate, chan_num, chan_bits, &i2s_clk, &i2s_bck, &bck_div) != ESP_OK) {
|
|
return ESP_FAIL;
|
|
}
|
|
//configure i2s clock
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
i2s_hal_tx_clock_config(&(p_i2s[i2s_num]->hal), i2s_clk, i2s_bck, bck_div);
|
|
i2s_hal_set_tx_sample_bit(&(p_i2s[i2s_num]->hal), chan_bits, data_bits);
|
|
// wait all writing on-going finish
|
|
if (p_i2s[i2s_num]->tx) {
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
}
|
|
i2s_hal_tx_set_channel_style(&(p_i2s[i2s_num]->hal), &(p_i2s[i2s_num]->hal_cfg));
|
|
}
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
i2s_hal_rx_clock_config(&(p_i2s[i2s_num]->hal), i2s_clk, i2s_bck, bck_div);
|
|
i2s_hal_set_rx_sample_bit(&(p_i2s[i2s_num]->hal), chan_bits, data_bits);
|
|
// wait all writing on-going finish
|
|
if (p_i2s[i2s_num]->rx) {
|
|
xSemaphoreGive(p_i2s[i2s_num]->rx->mux);
|
|
}
|
|
i2s_hal_rx_set_channel_style(&(p_i2s[i2s_num]->hal), &(p_i2s[i2s_num]->hal_cfg));
|
|
}
|
|
// Reset message queue to avoid receiving unavailable values because the old dma queque has been destroyed
|
|
if (p_i2s[i2s_num]->tx) {
|
|
xQueueReset(p_i2s[i2s_num]->tx->queue);
|
|
}
|
|
if (p_i2s[i2s_num]->rx) {
|
|
xQueueReset(p_i2s[i2s_num]->rx->queue);
|
|
}
|
|
|
|
//I2S start
|
|
i2s_start(i2s_num);
|
|
p_i2s[i2s_num]->sample_rate = rate;
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************
|
|
* I2S driver operation *
|
|
* - i2s_start *
|
|
* - i2s_stop *
|
|
* - i2s_driver_install *
|
|
* - i2s_write *
|
|
* - i2s_write_expand *
|
|
* - i2s_read *
|
|
**************************************************************/
|
|
|
|
esp_err_t i2s_start(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
//start DMA link
|
|
I2S_ENTER_CRITICAL(i2s_num);
|
|
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
i2s_tx_reset(i2s_num);
|
|
i2s_tx_start(i2s_num);
|
|
}
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
i2s_rx_reset(i2s_num);
|
|
i2s_rx_start(i2s_num);
|
|
}
|
|
#if !SOC_GDMA_SUPPORTED
|
|
esp_intr_enable(p_i2s[i2s_num]->i2s_isr_handle);
|
|
#endif
|
|
I2S_EXIT_CRITICAL(i2s_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_stop(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
I2S_ENTER_CRITICAL(i2s_num);
|
|
#if !SOC_GDMA_SUPPORTED
|
|
esp_intr_disable(p_i2s[i2s_num]->i2s_isr_handle);
|
|
#endif
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
i2s_tx_stop(i2s_num);
|
|
}
|
|
if (p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
i2s_rx_stop(i2s_num);
|
|
}
|
|
#if !SOC_GDMA_SUPPORTED
|
|
i2s_hal_clear_intr_status(&(p_i2s[i2s_num]->hal), I2S_INTR_MAX);
|
|
#endif
|
|
I2S_EXIT_CRITICAL(i2s_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_driver_install(i2s_port_t i2s_num, const i2s_config_t *i2s_config, int queue_size, void *i2s_queue)
|
|
{
|
|
esp_err_t ret = ESP_FAIL;
|
|
i2s_obj_t *pre_alloc_i2s_obj = NULL;
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((i2s_config != NULL), ESP_ERR_INVALID_ARG, TAG, "I2S configuration must not NULL");
|
|
ESP_RETURN_ON_FALSE((i2s_config->dma_buf_count >= 2 && i2s_config->dma_buf_count <= 128), ESP_ERR_INVALID_ARG, TAG, "I2S buffer count less than 128 and more than 2");
|
|
ESP_RETURN_ON_FALSE((i2s_config->dma_buf_len >= 8 && i2s_config->dma_buf_len <= 1024), ESP_ERR_INVALID_ARG, TAG, "I2S buffer length at most 1024 and more than 8");
|
|
|
|
// alloc driver object and register to platform
|
|
pre_alloc_i2s_obj = calloc(1, sizeof(i2s_obj_t));
|
|
ESP_RETURN_ON_FALSE(pre_alloc_i2s_obj, ESP_ERR_NO_MEM, TAG, "no mem for I2S driver");
|
|
ret = i2s_priv_register_object(pre_alloc_i2s_obj, i2s_num);
|
|
if (ret != ESP_OK) {
|
|
free(pre_alloc_i2s_obj);
|
|
ESP_LOGE(TAG, "register I2S object to platform failed");
|
|
return ret;
|
|
}
|
|
// initialize HAL layer
|
|
i2s_hal_init(&(pre_alloc_i2s_obj->hal), i2s_num);
|
|
|
|
// Set I2S HAL configurations
|
|
pre_alloc_i2s_obj->hal_cfg.mode = i2s_config->mode;
|
|
pre_alloc_i2s_obj->hal_cfg.sample_rate = i2s_config->sample_rate;
|
|
pre_alloc_i2s_obj->hal_cfg.comm_fmt = i2s_config->communication_format;
|
|
pre_alloc_i2s_obj->hal_cfg.chan_fmt = i2s_config->channel_format;
|
|
pre_alloc_i2s_obj->hal_cfg.bits_cfg.sample_bits = i2s_config->bits_per_sample;
|
|
pre_alloc_i2s_obj->hal_cfg.bits_cfg.chan_bits = i2s_config->bits_per_chan;
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
int active_chan = 0;
|
|
switch (i2s_config->channel_format) {
|
|
case I2S_CHANNEL_FMT_RIGHT_LEFT:
|
|
case I2S_CHANNEL_FMT_ALL_RIGHT:
|
|
case I2S_CHANNEL_FMT_ALL_LEFT:
|
|
pre_alloc_i2s_obj->hal_cfg.chan_mask = I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1;
|
|
pre_alloc_i2s_obj->hal_cfg.total_chan = 2;
|
|
active_chan = 2;
|
|
break;
|
|
case I2S_CHANNEL_FMT_ONLY_RIGHT:
|
|
pre_alloc_i2s_obj->hal_cfg.chan_mask = i2s_config->left_align ? I2S_TDM_ACTIVE_CH1 : I2S_TDM_ACTIVE_CH0;
|
|
pre_alloc_i2s_obj->hal_cfg.total_chan = 1;
|
|
active_chan = 1;
|
|
break;
|
|
case I2S_CHANNEL_FMT_ONLY_LEFT:
|
|
pre_alloc_i2s_obj->hal_cfg.chan_mask = i2s_config->left_align ? I2S_TDM_ACTIVE_CH0 : I2S_TDM_ACTIVE_CH1;
|
|
pre_alloc_i2s_obj->hal_cfg.total_chan = 1;
|
|
active_chan = 1;
|
|
break;
|
|
case I2S_CHANNEL_FMT_MULTIPLE:
|
|
ESP_GOTO_ON_FALSE(i2s_config->chan_mask != 0, ESP_ERR_INVALID_ARG, err, TAG, "i2s all channel are disabled");
|
|
pre_alloc_i2s_obj->hal_cfg.chan_mask = i2s_config->chan_mask;
|
|
i2s_get_active_chan_num(&pre_alloc_i2s_obj->hal_cfg);
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_INVALID_ARG, err, TAG, "invalid I2S channel format:%d", i2s_config->channel_format);
|
|
}
|
|
pre_alloc_i2s_obj->hal_cfg.left_align = i2s_config->left_align;
|
|
pre_alloc_i2s_obj->hal_cfg.big_edin = i2s_config->big_edin;
|
|
pre_alloc_i2s_obj->hal_cfg.bit_order_msb = i2s_config->bit_order_msb;
|
|
pre_alloc_i2s_obj->hal_cfg.skip_msk = i2s_config->skip_msk;
|
|
#endif
|
|
|
|
// Set I2S driver configurations
|
|
pre_alloc_i2s_obj->i2s_num = i2s_num;
|
|
pre_alloc_i2s_obj->mode = i2s_config->mode;
|
|
pre_alloc_i2s_obj->channel_num = i2s_get_active_chan_num(&pre_alloc_i2s_obj->hal_cfg);
|
|
pre_alloc_i2s_obj->i2s_queue = i2s_queue;
|
|
pre_alloc_i2s_obj->bits_per_sample = 0;
|
|
pre_alloc_i2s_obj->bytes_per_sample = 0; // Not initialized yet
|
|
pre_alloc_i2s_obj->dma_buf_count = i2s_config->dma_buf_count;
|
|
pre_alloc_i2s_obj->dma_buf_len = i2s_config->dma_buf_len;
|
|
pre_alloc_i2s_obj->mclk_multiple = i2s_config->mclk_multiple;
|
|
|
|
#ifdef CONFIG_PM_ENABLE
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (i2s_config->use_apll) {
|
|
ret = esp_pm_lock_create(ESP_PM_NO_LIGHT_SLEEP, 0, "i2s_driver", &pre_alloc_i2s_obj->pm_lock);
|
|
} else
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
{
|
|
ret = esp_pm_lock_create(ESP_PM_APB_FREQ_MAX, 0, "i2s_driver", &pre_alloc_i2s_obj->pm_lock);
|
|
}
|
|
ESP_GOTO_ON_ERROR(ret, err, TAG, "create PM lock failed");
|
|
#endif //CONFIG_PM_ENABLE
|
|
#if SOC_GDMA_SUPPORTED
|
|
ret = ESP_OK;
|
|
gdma_trigger_t trig = {.periph = GDMA_TRIG_PERIPH_I2S};
|
|
#if SOC_I2S_NUM > 1
|
|
trig.instance_id = (i2s_num == I2S_NUM_0) ? SOC_GDMA_TRIG_PERIPH_I2S0 : SOC_GDMA_TRIG_PERIPH_I2S1;
|
|
#else
|
|
trig.instance_id = SOC_GDMA_TRIG_PERIPH_I2S0;
|
|
#endif
|
|
gdma_channel_alloc_config_t dma_cfg = {.flags.reserve_sibling = 1};
|
|
if (pre_alloc_i2s_obj->mode & I2S_MODE_RX) {
|
|
dma_cfg.direction = GDMA_CHANNEL_DIRECTION_RX;
|
|
ESP_GOTO_ON_ERROR(gdma_new_channel(&dma_cfg, &pre_alloc_i2s_obj->rx_dma_chan), err, TAG, "Register rx dma channel error");
|
|
ESP_GOTO_ON_ERROR(gdma_connect(pre_alloc_i2s_obj->rx_dma_chan, trig), err, TAG, "Connect rx dma channel error");
|
|
gdma_rx_event_callbacks_t cb = {.on_recv_eof = i2s_dma_rx_callback};
|
|
gdma_register_rx_event_callbacks(pre_alloc_i2s_obj->rx_dma_chan, &cb, pre_alloc_i2s_obj);
|
|
}
|
|
if (pre_alloc_i2s_obj->mode & I2S_MODE_TX) {
|
|
dma_cfg.direction = GDMA_CHANNEL_DIRECTION_TX;
|
|
ESP_GOTO_ON_ERROR(gdma_new_channel(&dma_cfg, &pre_alloc_i2s_obj->tx_dma_chan), err, TAG, "Register tx dma channel error");
|
|
ESP_GOTO_ON_ERROR(gdma_connect(pre_alloc_i2s_obj->tx_dma_chan, trig), err, TAG, "Connect tx dma channel error");
|
|
gdma_tx_event_callbacks_t cb = {.on_trans_eof = i2s_dma_tx_callback};
|
|
gdma_register_tx_event_callbacks(pre_alloc_i2s_obj->tx_dma_chan, &cb, pre_alloc_i2s_obj);
|
|
}
|
|
#else
|
|
//initial interrupt
|
|
ret = esp_intr_alloc(i2s_periph_signal[i2s_num].irq, i2s_config->intr_alloc_flags, i2s_intr_handler_default, pre_alloc_i2s_obj, &pre_alloc_i2s_obj->i2s_isr_handle);
|
|
ESP_GOTO_ON_ERROR(ret, err, TAG, "Register I2S Interrupt error");
|
|
#endif // SOC_GDMA_SUPPORTED
|
|
i2s_stop(i2s_num);
|
|
pre_alloc_i2s_obj->use_apll = i2s_config->use_apll;
|
|
pre_alloc_i2s_obj->fixed_mclk = i2s_config->fixed_mclk;
|
|
pre_alloc_i2s_obj->tx_desc_auto_clear = i2s_config->tx_desc_auto_clear;
|
|
ret = i2s_param_config(i2s_num);
|
|
ESP_GOTO_ON_ERROR(ret, err, TAG, "I2S param configure error");
|
|
if (i2s_queue) {
|
|
pre_alloc_i2s_obj->i2s_queue = xQueueCreate(queue_size, sizeof(i2s_event_t));
|
|
ESP_GOTO_ON_ERROR((pre_alloc_i2s_obj->i2s_queue != NULL), err, TAG, "I2S queue create failed");
|
|
*((QueueHandle_t *) i2s_queue) = pre_alloc_i2s_obj->i2s_queue;
|
|
ESP_LOGI(TAG, "queue free spaces: %d", uxQueueSpacesAvailable(pre_alloc_i2s_obj->i2s_queue));
|
|
} else {
|
|
pre_alloc_i2s_obj->i2s_queue = NULL;
|
|
}
|
|
|
|
//set clock and start
|
|
#if SOC_I2S_SUPPORTS_TDM
|
|
ret = i2s_set_clk(i2s_num, i2s_config->sample_rate,
|
|
pre_alloc_i2s_obj->hal_cfg.bits_cfg.val,
|
|
(i2s_channel_t)active_chan);
|
|
#else
|
|
ret = i2s_set_clk(i2s_num, i2s_config->sample_rate,
|
|
pre_alloc_i2s_obj->hal_cfg.bits_cfg.val,
|
|
I2S_CHANNEL_STEREO);
|
|
#endif
|
|
ESP_GOTO_ON_ERROR(ret, err, TAG, "I2S set clock failed");
|
|
return ret;
|
|
err:
|
|
i2s_driver_uninstall(i2s_num);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_driver_uninstall(i2s_port_t i2s_num)
|
|
{
|
|
ESP_RETURN_ON_FALSE(i2s_num < I2S_NUM_MAX, ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE(p_i2s[i2s_num], ESP_ERR_INVALID_STATE, TAG, "I2S port %d has not installed", i2s_num);
|
|
i2s_obj_t *obj = p_i2s[i2s_num];
|
|
i2s_stop(i2s_num);
|
|
#if SOC_I2S_SUPPORTS_ADC_DAC
|
|
i2s_set_dac_mode(I2S_DAC_CHANNEL_DISABLE);
|
|
#endif
|
|
#if SOC_GDMA_SUPPORTED
|
|
if (p_i2s[i2s_num]->tx_dma_chan) {
|
|
gdma_disconnect(p_i2s[i2s_num]->tx_dma_chan);
|
|
gdma_del_channel(p_i2s[i2s_num]->tx_dma_chan);
|
|
}
|
|
if (p_i2s[i2s_num]->rx_dma_chan) {
|
|
gdma_disconnect(p_i2s[i2s_num]->rx_dma_chan);
|
|
gdma_del_channel(p_i2s[i2s_num]->rx_dma_chan);
|
|
}
|
|
#else
|
|
if (p_i2s[i2s_num]->i2s_isr_handle) {
|
|
esp_intr_free(p_i2s[i2s_num]->i2s_isr_handle);
|
|
}
|
|
#endif
|
|
if (p_i2s[i2s_num]->tx != NULL && p_i2s[i2s_num]->mode & I2S_MODE_TX) {
|
|
i2s_destroy_dma_queue(i2s_num, p_i2s[i2s_num]->tx);
|
|
p_i2s[i2s_num]->tx = NULL;
|
|
}
|
|
if (p_i2s[i2s_num]->rx != NULL && p_i2s[i2s_num]->mode & I2S_MODE_RX) {
|
|
i2s_destroy_dma_queue(i2s_num, p_i2s[i2s_num]->rx);
|
|
p_i2s[i2s_num]->rx = NULL;
|
|
}
|
|
|
|
if (p_i2s[i2s_num]->i2s_queue) {
|
|
vQueueDelete(p_i2s[i2s_num]->i2s_queue);
|
|
p_i2s[i2s_num]->i2s_queue = NULL;
|
|
}
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (p_i2s[i2s_num]->use_apll) {
|
|
// switch back to PLL clock source
|
|
i2s_hal_set_clock_src(&(p_i2s[i2s_num]->hal), I2S_CLK_D2CLK);
|
|
rtc_clk_apll_enable(0, 0, 0, 0, 0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_ENABLE
|
|
if (p_i2s[i2s_num]->pm_lock) {
|
|
esp_pm_lock_delete(p_i2s[i2s_num]->pm_lock);
|
|
}
|
|
#endif
|
|
i2s_priv_deregister_object(i2s_num);
|
|
free(obj);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_write(i2s_port_t i2s_num, const void *src, size_t size, size_t *bytes_written, TickType_t ticks_to_wait)
|
|
{
|
|
char *data_ptr, *src_byte;
|
|
size_t bytes_can_write;
|
|
*bytes_written = 0;
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->tx), ESP_ERR_INVALID_ARG, TAG, "tx NULL");
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, (portTickType)portMAX_DELAY);
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_acquire(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
src_byte = (char *)src;
|
|
while (size > 0) {
|
|
if (p_i2s[i2s_num]->tx->rw_pos == p_i2s[i2s_num]->tx->buf_size || p_i2s[i2s_num]->tx->curr_ptr == NULL) {
|
|
if (xQueueReceive(p_i2s[i2s_num]->tx->queue, &p_i2s[i2s_num]->tx->curr_ptr, ticks_to_wait) == pdFALSE) {
|
|
break;
|
|
}
|
|
p_i2s[i2s_num]->tx->rw_pos = 0;
|
|
}
|
|
ESP_LOGD(TAG, "size: %d, rw_pos: %d, buf_size: %d, curr_ptr: %d", size, p_i2s[i2s_num]->tx->rw_pos, p_i2s[i2s_num]->tx->buf_size, (int)p_i2s[i2s_num]->tx->curr_ptr);
|
|
data_ptr = (char *)p_i2s[i2s_num]->tx->curr_ptr;
|
|
data_ptr += p_i2s[i2s_num]->tx->rw_pos;
|
|
bytes_can_write = p_i2s[i2s_num]->tx->buf_size - p_i2s[i2s_num]->tx->rw_pos;
|
|
if (bytes_can_write > size) {
|
|
bytes_can_write = size;
|
|
}
|
|
memcpy(data_ptr, src_byte, bytes_can_write);
|
|
size -= bytes_can_write;
|
|
src_byte += bytes_can_write;
|
|
p_i2s[i2s_num]->tx->rw_pos += bytes_can_write;
|
|
(*bytes_written) += bytes_can_write;
|
|
}
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_release(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_write_expand(i2s_port_t i2s_num, const void *src, size_t size, size_t src_bits, size_t aim_bits, size_t *bytes_written, TickType_t ticks_to_wait)
|
|
{
|
|
char *data_ptr;
|
|
int bytes_can_write, tail;
|
|
int src_bytes, aim_bytes, zero_bytes;
|
|
*bytes_written = 0;
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((size > 0), ESP_ERR_INVALID_ARG, TAG, "size must greater than zero");
|
|
ESP_RETURN_ON_FALSE((aim_bits >= src_bits), ESP_ERR_INVALID_ARG, TAG, "aim_bits mustn't be less than src_bits");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->tx), ESP_ERR_INVALID_ARG, TAG, "tx NULL");
|
|
if (src_bits < I2S_BITS_PER_SAMPLE_8BIT || aim_bits < I2S_BITS_PER_SAMPLE_8BIT) {
|
|
ESP_LOGE(TAG, "bits mustn't be less than 8, src_bits %d aim_bits %d", src_bits, aim_bits);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if (src_bits > I2S_BITS_PER_SAMPLE_32BIT || aim_bits > I2S_BITS_PER_SAMPLE_32BIT) {
|
|
ESP_LOGE(TAG, "bits mustn't be greater than 32, src_bits %d aim_bits %d", src_bits, aim_bits);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if ((src_bits == I2S_BITS_PER_SAMPLE_16BIT || src_bits == I2S_BITS_PER_SAMPLE_32BIT) && (size % 2 != 0)) {
|
|
ESP_LOGE(TAG, "size must be a even number while src_bits is even, src_bits %d size %d", src_bits, size);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if (src_bits == I2S_BITS_PER_SAMPLE_24BIT && (size % 3 != 0)) {
|
|
ESP_LOGE(TAG, "size must be a multiple of 3 while src_bits is 24, size %d", size);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
src_bytes = src_bits / 8;
|
|
aim_bytes = aim_bits / 8;
|
|
zero_bytes = aim_bytes - src_bytes;
|
|
xSemaphoreTake(p_i2s[i2s_num]->tx->mux, (portTickType)portMAX_DELAY);
|
|
size = size * aim_bytes / src_bytes;
|
|
ESP_LOGD(TAG, "aim_bytes %d src_bytes %d size %d", aim_bytes, src_bytes, size);
|
|
while (size > 0) {
|
|
if (p_i2s[i2s_num]->tx->rw_pos == p_i2s[i2s_num]->tx->buf_size || p_i2s[i2s_num]->tx->curr_ptr == NULL) {
|
|
if (xQueueReceive(p_i2s[i2s_num]->tx->queue, &p_i2s[i2s_num]->tx->curr_ptr, ticks_to_wait) == pdFALSE) {
|
|
break;
|
|
}
|
|
p_i2s[i2s_num]->tx->rw_pos = 0;
|
|
}
|
|
data_ptr = (char *)p_i2s[i2s_num]->tx->curr_ptr;
|
|
data_ptr += p_i2s[i2s_num]->tx->rw_pos;
|
|
bytes_can_write = p_i2s[i2s_num]->tx->buf_size - p_i2s[i2s_num]->tx->rw_pos;
|
|
if (bytes_can_write > (int)size) {
|
|
bytes_can_write = size;
|
|
}
|
|
tail = bytes_can_write % aim_bytes;
|
|
bytes_can_write = bytes_can_write - tail;
|
|
|
|
memset(data_ptr, 0, bytes_can_write);
|
|
for (int j = 0; j < bytes_can_write; j += (aim_bytes - zero_bytes)) {
|
|
j += zero_bytes;
|
|
memcpy(&data_ptr[j], (const char *)(src + *bytes_written), aim_bytes - zero_bytes);
|
|
(*bytes_written) += (aim_bytes - zero_bytes);
|
|
}
|
|
size -= bytes_can_write;
|
|
p_i2s[i2s_num]->tx->rw_pos += bytes_can_write;
|
|
}
|
|
xSemaphoreGive(p_i2s[i2s_num]->tx->mux);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_read(i2s_port_t i2s_num, void *dest, size_t size, size_t *bytes_read, TickType_t ticks_to_wait)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
char *data_ptr, *dest_byte;
|
|
int bytes_can_read;
|
|
*bytes_read = 0;
|
|
dest_byte = (char *)dest;
|
|
ESP_RETURN_ON_FALSE((i2s_num < I2S_NUM_MAX), ESP_ERR_INVALID_ARG, TAG, "i2s_num error");
|
|
ESP_RETURN_ON_FALSE((p_i2s[i2s_num]->rx), ESP_ERR_INVALID_ARG, TAG, "rx NULL");
|
|
xSemaphoreTake(p_i2s[i2s_num]->rx->mux, (portTickType)portMAX_DELAY);
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_acquire(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
while (size > 0) {
|
|
if (p_i2s[i2s_num]->rx->rw_pos == p_i2s[i2s_num]->rx->buf_size || p_i2s[i2s_num]->rx->curr_ptr == NULL) {
|
|
if (xQueueReceive(p_i2s[i2s_num]->rx->queue, &p_i2s[i2s_num]->rx->curr_ptr, ticks_to_wait) == pdFALSE) {
|
|
ret = ESP_ERR_TIMEOUT;
|
|
break;
|
|
}
|
|
p_i2s[i2s_num]->rx->rw_pos = 0;
|
|
}
|
|
data_ptr = (char *)p_i2s[i2s_num]->rx->curr_ptr;
|
|
data_ptr += p_i2s[i2s_num]->rx->rw_pos;
|
|
bytes_can_read = p_i2s[i2s_num]->rx->buf_size - p_i2s[i2s_num]->rx->rw_pos;
|
|
if (bytes_can_read > (int)size) {
|
|
bytes_can_read = size;
|
|
}
|
|
memcpy(dest_byte, data_ptr, bytes_can_read);
|
|
size -= bytes_can_read;
|
|
dest_byte += bytes_can_read;
|
|
p_i2s[i2s_num]->rx->rw_pos += bytes_can_read;
|
|
(*bytes_read) += bytes_can_read;
|
|
}
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_release(p_i2s[i2s_num]->pm_lock);
|
|
#endif
|
|
xSemaphoreGive(p_i2s[i2s_num]->rx->mux);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_priv_register_object(void *driver_obj, int port_id)
|
|
{
|
|
esp_err_t ret = ESP_ERR_NOT_FOUND;
|
|
ESP_RETURN_ON_FALSE(driver_obj && (port_id < SOC_I2S_NUM), ESP_ERR_INVALID_ARG, TAG, "invalid arguments");
|
|
portENTER_CRITICAL(&i2s_platform_spinlock);
|
|
if (!p_i2s[port_id]) {
|
|
ret = ESP_OK;
|
|
p_i2s[port_id] = driver_obj;
|
|
periph_module_enable(i2s_periph_signal[port_id].module);
|
|
}
|
|
portEXIT_CRITICAL(&i2s_platform_spinlock);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_priv_deregister_object(int port_id)
|
|
{
|
|
esp_err_t ret = ESP_ERR_INVALID_STATE;
|
|
ESP_RETURN_ON_FALSE(port_id < SOC_I2S_NUM, ESP_ERR_INVALID_ARG, TAG, "invalid arguments");
|
|
portENTER_CRITICAL(&i2s_platform_spinlock);
|
|
if (p_i2s[port_id]) {
|
|
ret = ESP_OK;
|
|
p_i2s[port_id] = NULL;
|
|
periph_module_disable(i2s_periph_signal[port_id].module);
|
|
}
|
|
portEXIT_CRITICAL(&i2s_platform_spinlock);
|
|
return ret;
|
|
}
|