esp-idf/examples/bluetooth/nimble/ble_spp/spp_server/main/main.c
Isha Pardikar 4ab6aafecc Merge branch 'feature/nimble_spp_multiple_profile_conn' into 'master'
Added support for multiple profile connection in NimBLE SPP example.

Closes IDFGH-7001
2022-05-29 06:10:18 +00:00

444 lines
14 KiB
C

/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Unlicense OR CC0-1.0
*/
#include "esp_log.h"
#include "nvs_flash.h"
/* BLE */
#include "esp_nimble_hci.h"
#include "nimble/nimble_port.h"
#include "nimble/nimble_port_freertos.h"
#include "host/ble_hs.h"
#include "host/util/util.h"
#include "console/console.h"
#include "services/gap/ble_svc_gap.h"
#include "ble_spp_server.h"
#include "driver/uart.h"
static const char *tag = "NimBLE_SPP_BLE_PRPH";
static int ble_spp_server_gap_event(struct ble_gap_event *event, void *arg);
static uint8_t own_addr_type;
int gatt_svr_register(void);
QueueHandle_t spp_common_uart_queue = NULL;
static bool is_connect = false;
uint16_t connection_handle;
static uint16_t ble_svc_gatt_read_val_handle,ble_spp_svc_gatt_read_val_handle;
/* 16 Bit Alert Notification Service UUID */
#define BLE_SVC_ANS_UUID16 0x1811
/* 16 Bit Alert Notification Service Characteristic UUIDs */
#define BLE_SVC_ANS_CHR_UUID16_SUP_NEW_ALERT_CAT 0x2a47
/* 16 Bit SPP Service UUID */
#define BLE_SVC_SPP_UUID16 0xABF0
/* 16 Bit SPP Service Characteristic UUID */
#define BLE_SVC_SPP_CHR_UUID16 0xABF1
void ble_store_config_init(void);
/**
* Logs information about a connection to the console.
*/
static void
ble_spp_server_print_conn_desc(struct ble_gap_conn_desc *desc)
{
MODLOG_DFLT(INFO, "handle=%d our_ota_addr_type=%d our_ota_addr=",
desc->conn_handle, desc->our_ota_addr.type);
print_addr(desc->our_ota_addr.val);
MODLOG_DFLT(INFO, " our_id_addr_type=%d our_id_addr=",
desc->our_id_addr.type);
print_addr(desc->our_id_addr.val);
MODLOG_DFLT(INFO, " peer_ota_addr_type=%d peer_ota_addr=",
desc->peer_ota_addr.type);
print_addr(desc->peer_ota_addr.val);
MODLOG_DFLT(INFO, " peer_id_addr_type=%d peer_id_addr=",
desc->peer_id_addr.type);
print_addr(desc->peer_id_addr.val);
MODLOG_DFLT(INFO, " conn_itvl=%d conn_latency=%d supervision_timeout=%d "
"encrypted=%d authenticated=%d bonded=%d\n",
desc->conn_itvl, desc->conn_latency,
desc->supervision_timeout,
desc->sec_state.encrypted,
desc->sec_state.authenticated,
desc->sec_state.bonded);
}
/**
* Enables advertising with the following parameters:
* o General discoverable mode.
* o Undirected connectable mode.
*/
static void
ble_spp_server_advertise(void)
{
struct ble_gap_adv_params adv_params;
struct ble_hs_adv_fields fields;
const char *name;
int rc;
/**
* Set the advertisement data included in our advertisements:
* o Flags (indicates advertisement type and other general info).
* o Advertising tx power.
* o Device name.
* o 16-bit service UUIDs (alert notifications).
*/
memset(&fields, 0, sizeof fields);
/* Advertise two flags:
* o Discoverability in forthcoming advertisement (general)
* o BLE-only (BR/EDR unsupported).
*/
fields.flags = BLE_HS_ADV_F_DISC_GEN |
BLE_HS_ADV_F_BREDR_UNSUP;
/* Indicate that the TX power level field should be included; have the
* stack fill this value automatically. This is done by assigning the
* special value BLE_HS_ADV_TX_PWR_LVL_AUTO.
*/
fields.tx_pwr_lvl_is_present = 1;
fields.tx_pwr_lvl = BLE_HS_ADV_TX_PWR_LVL_AUTO;
name = ble_svc_gap_device_name();
fields.name = (uint8_t *)name;
fields.name_len = strlen(name);
fields.name_is_complete = 1;
fields.uuids16 = (ble_uuid16_t[]) {
BLE_UUID16_INIT(GATT_SVR_SVC_ALERT_UUID)
};
fields.num_uuids16 = 1;
fields.uuids16_is_complete = 1;
rc = ble_gap_adv_set_fields(&fields);
if (rc != 0) {
MODLOG_DFLT(ERROR, "error setting advertisement data; rc=%d\n", rc);
return;
}
/* Begin advertising. */
memset(&adv_params, 0, sizeof adv_params);
adv_params.conn_mode = BLE_GAP_CONN_MODE_UND;
adv_params.disc_mode = BLE_GAP_DISC_MODE_GEN;
rc = ble_gap_adv_start(own_addr_type, NULL, BLE_HS_FOREVER,
&adv_params, ble_spp_server_gap_event, NULL);
if (rc != 0) {
MODLOG_DFLT(ERROR, "error enabling advertisement; rc=%d\n", rc);
return;
}
}
/**
* The nimble host executes this callback when a GAP event occurs. The
* application associates a GAP event callback with each connection that forms.
* ble_spp_server uses the same callback for all connections.
*
* @param event The type of event being signalled.
* @param ctxt Various information pertaining to the event.
* @param arg Application-specified argument; unused by
* ble_spp_server.
*
* @return 0 if the application successfully handled the
* event; nonzero on failure. The semantics
* of the return code is specific to the
* particular GAP event being signalled.
*/
static int
ble_spp_server_gap_event(struct ble_gap_event *event, void *arg)
{
struct ble_gap_conn_desc desc;
int rc;
switch (event->type) {
case BLE_GAP_EVENT_CONNECT:
/* A new connection was established or a connection attempt failed. */
MODLOG_DFLT(INFO, "connection %s; status=%d ",
event->connect.status == 0 ? "established" : "failed",
event->connect.status);
if (event->connect.status == 0) {
rc = ble_gap_conn_find(event->connect.conn_handle, &desc);
assert(rc == 0);
ble_spp_server_print_conn_desc(&desc);
is_connect=true;
connection_handle = event->connect.conn_handle;
}
MODLOG_DFLT(INFO, "\n");
if (event->connect.status != 0) {
/* Connection failed; resume advertising. */
ble_spp_server_advertise();
}
return 0;
case BLE_GAP_EVENT_DISCONNECT:
MODLOG_DFLT(INFO, "disconnect; reason=%d ", event->disconnect.reason);
ble_spp_server_print_conn_desc(&event->disconnect.conn);
MODLOG_DFLT(INFO, "\n");
/* Connection terminated; resume advertising. */
ble_spp_server_advertise();
return 0;
case BLE_GAP_EVENT_CONN_UPDATE:
/* The central has updated the connection parameters. */
MODLOG_DFLT(INFO, "connection updated; status=%d ",
event->conn_update.status);
rc = ble_gap_conn_find(event->conn_update.conn_handle, &desc);
assert(rc == 0);
ble_spp_server_print_conn_desc(&desc);
MODLOG_DFLT(INFO, "\n");
return 0;
case BLE_GAP_EVENT_ADV_COMPLETE:
MODLOG_DFLT(INFO, "advertise complete; reason=%d",
event->adv_complete.reason);
ble_spp_server_advertise();
return 0;
case BLE_GAP_EVENT_MTU:
MODLOG_DFLT(INFO, "mtu update event; conn_handle=%d cid=%d mtu=%d\n",
event->mtu.conn_handle,
event->mtu.channel_id,
event->mtu.value);
return 0;
default:
return 0;
}
}
static void
ble_spp_server_on_reset(int reason)
{
MODLOG_DFLT(ERROR, "Resetting state; reason=%d\n", reason);
}
static void
ble_spp_server_on_sync(void)
{
int rc;
rc = ble_hs_util_ensure_addr(0);
assert(rc == 0);
/* Figure out address to use while advertising (no privacy for now) */
rc = ble_hs_id_infer_auto(0, &own_addr_type);
if (rc != 0) {
MODLOG_DFLT(ERROR, "error determining address type; rc=%d\n", rc);
return;
}
/* Printing ADDR */
uint8_t addr_val[6] = {0};
rc = ble_hs_id_copy_addr(own_addr_type, addr_val, NULL);
MODLOG_DFLT(INFO, "Device Address: ");
print_addr(addr_val);
MODLOG_DFLT(INFO, "\n");
/* Begin advertising. */
ble_spp_server_advertise();
}
void ble_spp_server_host_task(void *param)
{
ESP_LOGI(tag, "BLE Host Task Started");
/* This function will return only when nimble_port_stop() is executed */
nimble_port_run();
nimble_port_freertos_deinit();
}
/* Callback function for custom service */
static int ble_svc_gatt_handler(uint16_t conn_handle, uint16_t attr_handle,struct ble_gatt_access_ctxt *ctxt, void *arg)
{
switch(ctxt->op){
case BLE_GATT_ACCESS_OP_READ_CHR:
ESP_LOGI(tag, "Callback for read");
break;
case BLE_GATT_ACCESS_OP_WRITE_CHR:
ESP_LOGI(tag,"Data received in write event,conn_handle = %x,attr_handle = %x",conn_handle,attr_handle);
break;
default:
ESP_LOGI(tag, "\nDefault Callback");
break;
}
return 0;
}
/* Define new custom service */
static const struct ble_gatt_svc_def new_ble_svc_gatt_defs[] = {
{
/*** Service: GATT */
.type = BLE_GATT_SVC_TYPE_PRIMARY,
.uuid = BLE_UUID16_DECLARE(BLE_SVC_ANS_UUID16),
.characteristics = (struct ble_gatt_chr_def[]) { {
/* Support new alert category */
.uuid = BLE_UUID16_DECLARE(BLE_SVC_ANS_CHR_UUID16_SUP_NEW_ALERT_CAT),
.access_cb = ble_svc_gatt_handler,
.val_handle = &ble_svc_gatt_read_val_handle,
.flags = BLE_GATT_CHR_F_READ | BLE_GATT_CHR_F_WRITE | BLE_GATT_CHR_F_NOTIFY | BLE_GATT_CHR_F_INDICATE,
},
{
0, /* No more characteristics */
}
},
},
{
/*** Service: SPP */
.type = BLE_GATT_SVC_TYPE_PRIMARY,
.uuid = BLE_UUID16_DECLARE(BLE_SVC_SPP_UUID16),
.characteristics = (struct ble_gatt_chr_def[]) { {
/* Support SPP service */
.uuid = BLE_UUID16_DECLARE(BLE_SVC_SPP_CHR_UUID16),
.access_cb = ble_svc_gatt_handler,
.val_handle = &ble_spp_svc_gatt_read_val_handle,
.flags = BLE_GATT_CHR_F_READ | BLE_GATT_CHR_F_WRITE | BLE_GATT_CHR_F_NOTIFY | BLE_GATT_CHR_F_INDICATE,
},
{
0, /* No more characteristics */
}
},
},
{
0, /* No more services. */
},
};
int gatt_svr_register(void)
{
int rc=0;
rc = ble_gatts_count_cfg(new_ble_svc_gatt_defs);
if (rc != 0) {
return rc;
}
rc = ble_gatts_add_svcs(new_ble_svc_gatt_defs);
if (rc != 0) {
return rc;
}
return 0;
}
void ble_server_uart_task(void *pvParameters){
ESP_LOGI(tag,"BLE server UART_task started\n");
uart_event_t event;
int rc=0;
for (;;) {
//Waiting for UART event.
if (xQueueReceive(spp_common_uart_queue, (void * )&event, (TickType_t)portMAX_DELAY)) {
switch (event.type) {
//Event of UART receving data
case UART_DATA:
if (event.size && (is_connect == true)) {
static uint8_t ntf[1];
ntf[0] = 90;
struct os_mbuf *txom;
txom = ble_hs_mbuf_from_flat(ntf, sizeof(ntf));
rc = ble_gattc_notify_custom(connection_handle,ble_spp_svc_gatt_read_val_handle,txom);
if( rc == 0){
ESP_LOGI(tag,"Notification sent successfully");
}
else {
ESP_LOGI(tag,"Error in sending notification");
}
}
break;
default:
break;
}
}
}
vTaskDelete(NULL);
}
static void ble_spp_uart_init(void)
{
uart_config_t uart_config = {
.baud_rate = 115200,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_RTS,
.rx_flow_ctrl_thresh = 122,
.source_clk = UART_SCLK_DEFAULT,
};
//Install UART driver, and get the queue.
uart_driver_install(UART_NUM_0, 4096, 8192, 10,&spp_common_uart_queue,0);
//Set UART parameters
uart_param_config(UART_NUM_0, &uart_config);
//Set UART pins
uart_set_pin(UART_NUM_0, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
xTaskCreate(ble_server_uart_task, "uTask", 4096, (void*)UART_NUM_0, 8, NULL);
}
void
app_main(void)
{
int rc;
/* Initialize NVS — it is used to store PHY calibration data */
esp_err_t ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK(ret);
ESP_ERROR_CHECK(esp_nimble_hci_and_controller_init());
nimble_port_init();
/* Initialize uart driver and start uart task */
ble_spp_uart_init();
/* Initialize the NimBLE host configuration. */
ble_hs_cfg.reset_cb = ble_spp_server_on_reset;
ble_hs_cfg.sync_cb = ble_spp_server_on_sync;
ble_hs_cfg.gatts_register_cb = gatt_svr_register_cb;
ble_hs_cfg.store_status_cb = ble_store_util_status_rr;
ble_hs_cfg.sm_io_cap = CONFIG_EXAMPLE_IO_TYPE;
#ifdef CONFIG_EXAMPLE_BONDING
ble_hs_cfg.sm_bonding = 1;
#endif
#ifdef CONFIG_EXAMPLE_MITM
ble_hs_cfg.sm_mitm = 1;
#endif
#ifdef CONFIG_EXAMPLE_USE_SC
ble_hs_cfg.sm_sc = 1;
#else
ble_hs_cfg.sm_sc = 0;
#endif
#ifdef CONFIG_EXAMPLE_BONDING
ble_hs_cfg.sm_our_key_dist = 1;
ble_hs_cfg.sm_their_key_dist = 1;
#endif
rc = new_gatt_svr_init();
assert(rc == 0);
/* Register custom service */
rc = gatt_svr_register();
assert(rc == 0);
/* Set the default device name. */
rc = ble_svc_gap_device_name_set("nimble-ble-spp-svr");
assert(rc == 0);
/* XXX Need to have template for store */
ble_store_config_init();
nimble_port_freertos_init(ble_spp_server_host_task);
}