mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
3fd37d0b59
The way the adc_dma_demo data was formatted caused it go get parsed as markdown syntax. Changed it be more "human" readable as well as put all ADC examples in a common folder
70 lines
2.2 KiB
C
70 lines
2.2 KiB
C
/* ADC2 Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/queue.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/adc.h"
|
|
#include "driver/dac.h"
|
|
#include "esp_system.h"
|
|
|
|
#define DAC_EXAMPLE_CHANNEL CONFIG_EXAMPLE_DAC_CHANNEL
|
|
#define ADC2_EXAMPLE_CHANNEL CONFIG_EXAMPLE_ADC2_CHANNEL
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
static const adc_bits_width_t width = ADC_WIDTH_BIT_13;
|
|
#endif
|
|
|
|
void app_main(void)
|
|
{
|
|
uint8_t output_data=0;
|
|
int read_raw;
|
|
esp_err_t r;
|
|
|
|
gpio_num_t adc_gpio_num, dac_gpio_num;
|
|
|
|
r = adc2_pad_get_io_num( ADC2_EXAMPLE_CHANNEL, &adc_gpio_num );
|
|
assert( r == ESP_OK );
|
|
r = dac_pad_get_io_num( DAC_EXAMPLE_CHANNEL, &dac_gpio_num );
|
|
assert( r == ESP_OK );
|
|
|
|
printf("ADC2 channel %d @ GPIO %d, DAC channel %d @ GPIO %d.\n", ADC2_EXAMPLE_CHANNEL, adc_gpio_num,
|
|
DAC_EXAMPLE_CHANNEL + 1, dac_gpio_num );
|
|
|
|
dac_output_enable( DAC_EXAMPLE_CHANNEL );
|
|
|
|
//be sure to do the init before using adc2.
|
|
printf("adc2_init...\n");
|
|
adc2_config_channel_atten( ADC2_EXAMPLE_CHANNEL, ADC_ATTEN_11db );
|
|
|
|
vTaskDelay(2 * portTICK_PERIOD_MS);
|
|
|
|
printf("start conversion.\n");
|
|
while(1) {
|
|
dac_output_voltage( DAC_EXAMPLE_CHANNEL, output_data++ );
|
|
r = adc2_get_raw( ADC2_EXAMPLE_CHANNEL, width, &read_raw);
|
|
if ( r == ESP_OK ) {
|
|
printf("%d: %d\n", output_data, read_raw );
|
|
} else if ( r == ESP_ERR_INVALID_STATE ) {
|
|
printf("%s: ADC2 not initialized yet.\n", esp_err_to_name(r));
|
|
} else if ( r == ESP_ERR_TIMEOUT ) {
|
|
//This can not happen in this example. But if WiFi is in use, such error code could be returned.
|
|
printf("%s: ADC2 is in use by Wi-Fi.\n", esp_err_to_name(r));
|
|
} else {
|
|
printf("%s\n", esp_err_to_name(r));
|
|
}
|
|
|
|
vTaskDelay( 2 * portTICK_PERIOD_MS );
|
|
}
|
|
}
|