esp-idf/components/mbedtls/port/include/mbedtls/esp_config.h

2705 lines
75 KiB
C

/**
*
* \brief Default mbedTLS configuration options for ESP-IDF
*
* This set of compile-time options may be used to enable
* or disable features selectively, and reduce the global
* memory footprint.
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* This set of compile-time options may be used to enable
* or disable features selectively, and reduce the global
* memory footprint.
*
* SPDX-FileCopyrightText: The Mbed TLS Contributors
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ESP_CONFIG_H
#define ESP_CONFIG_H
#include "sdkconfig.h"
#include "mbedtls/mbedtls_config.h"
#include "soc/soc_caps.h"
/**
* \name SECTION: System support
*
* This section sets system specific settings.
* \{
*/
/**
* \def MBEDTLS_HAVE_TIME
*
* System has time.h and time().
* The time does not need to be correct, only time differences are used,
* by contrast with MBEDTLS_HAVE_TIME_DATE
*
* Comment if your system does not support time functions
*/
#ifdef CONFIG_MBEDTLS_HAVE_TIME
#define MBEDTLS_HAVE_TIME
#else
#undef MBEDTLS_HAVE_TIME
#endif
/**
* \def MBEDTLS_HAVE_TIME_DATE
*
* System has time.h and time(), gmtime() and the clock is correct.
* The time needs to be correct (not necesarily very accurate, but at least
* the date should be correct). This is used to verify the validity period of
* X.509 certificates.
*
* Comment if your system does not have a correct clock.
*/
#ifdef CONFIG_MBEDTLS_HAVE_TIME_DATE
#define MBEDTLS_HAVE_TIME_DATE
#else
#undef MBEDTLS_HAVE_TIME_DATE
#endif
/**
* \def MBEDTLS_PLATFORM_TIME_ALT
*
* mbed TLS will provide a function "mbedtls_platform_set_time()"
* that allows you to set an alternative time function pointer.
*
* All these define require MBEDTLS_PLATFORM_C to be defined!
*
* \warning MBEDTLS_PLATFORM_TIME_ALT cannot be defined at the same time as
* MBEDTLS_PLATFORM_TIME_MACRO!
*
* Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME
*/
#ifdef CONFIG_MBEDTLS_PLATFORM_TIME_ALT
#define MBEDTLS_PLATFORM_TIME_ALT
#else
#undef MBEDTLS_PLATFORM_TIME_ALT
#endif
/**
* \def MBEDTLS_PLATFORM_MEMORY
*
* Enable the memory allocation layer.
*
* By default mbed TLS uses the system-provided calloc() and free().
* This allows different allocators (self-implemented or provided) to be
* provided to the platform abstraction layer.
*
* Enabling MBEDTLS_PLATFORM_MEMORY without the
* MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide
* "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and
* free() function pointer at runtime.
*
* Enabling MBEDTLS_PLATFORM_MEMORY and specifying
* MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the
* alternate function at compile time.
*
* Requires: MBEDTLS_PLATFORM_C
*
* Enable this layer to allow use of alternative memory allocators.
*/
#define MBEDTLS_PLATFORM_MEMORY
/** Override calloc(), free() except for case where memory allocation scheme is not set to custom */
#ifndef CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC
#include "esp_mem.h"
#define MBEDTLS_PLATFORM_STD_CALLOC esp_mbedtls_mem_calloc
#define MBEDTLS_PLATFORM_STD_FREE esp_mbedtls_mem_free
#endif
/* \} name SECTION: System support */
/**
* \name SECTION: mbed TLS feature support
*
* This section sets support for features that are or are not needed
* within the modules that are enabled.
* \{
*/
/* The following units have ESP32 hardware support,
uncommenting each _ALT macro will use the
hardware-accelerated implementation. */
#ifdef CONFIG_MBEDTLS_HARDWARE_AES
#define MBEDTLS_AES_ALT
#else
#undef MBEDTLS_AES_ALT
#endif
#ifdef CONFIG_MBEDTLS_HARDWARE_GCM
#define MBEDTLS_GCM_ALT
#else
#undef MBEDTLS_GCM_ALT
#endif
/* MBEDTLS_SHAxx_ALT to enable hardware SHA support
with software fallback.
*/
#ifdef CONFIG_MBEDTLS_HARDWARE_SHA
#define MBEDTLS_SHA1_ALT
#define MBEDTLS_SHA256_ALT
#if SOC_SHA_SUPPORT_SHA512
#define MBEDTLS_SHA512_ALT
#else
#undef MBEDTLS_SHA512_ALT
#endif
#else
#undef MBEDTLS_SHA1_ALT
#undef MBEDTLS_SHA256_ALT
#undef MBEDTLS_SHA512_ALT
#endif
/* MBEDTLS_MDx_ALT to enable ROM MD support
with software fallback.
*/
#ifdef CONFIG_MBEDTLS_ROM_MD5
#define MBEDTLS_MD5_ALT
#else
#undef MBEDTLS_MD5_ALT
#endif
/* The following MPI (bignum) functions have hardware support.
* Uncommenting these macros will use the hardware-accelerated
* implementations.
*/
#ifdef CONFIG_MBEDTLS_HARDWARE_MPI
#ifdef CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI
/* Prefer hardware and fallback to software */
#define MBEDTLS_MPI_EXP_MOD_ALT_FALLBACK
#else
/* Hardware only mode */
#define MBEDTLS_MPI_EXP_MOD_ALT
#endif
#define MBEDTLS_MPI_MUL_MPI_ALT
#else
#undef MBEDTLS_MPI_EXP_MOD_ALT_FALLBACK
#undef MBEDTLS_MPI_EXP_MOD_ALT
#undef MBEDTLS_MPI_MUL_MPI_ALT
#endif
#ifdef CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN
#define MBEDTLS_ECDSA_SIGN_ALT
#endif
#ifdef CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY
#define MBEDTLS_ECDSA_VERIFY_ALT
#endif
#ifdef CONFIG_MBEDTLS_HARDWARE_ECC
#ifdef CONFIG_MBEDTLS_ECC_OTHER_CURVES_SOFT_FALLBACK
/* Use hardware accelerator for SECP192R1 and SECP256R1 curves,
* software implementation for rest of the curves
*/
#define MBEDTLS_ECP_MUL_ALT_SOFT_FALLBACK
#define MBEDTLS_ECP_VERIFY_ALT_SOFT_FALLBACK
#else
/* Only hardware accelerator support */
#define MBEDTLS_ECP_MUL_ALT
#define MBEDTLS_ECP_VERIFY_ALT
#endif
#else
#undef MBEDTLS_ECP_MUL_ALT
#undef MBEDTLS_ECP_MUL_ALT_SOFT_FALLBACK
#undef MBEDTLS_ECP_VERIFY_ALT
#undef MBEDTLS_ECP_VERIFY_ALT_SOFT_FALLBACK
#endif
/**
* \def MBEDTLS_ENTROPY_HARDWARE_ALT
*
* Uncomment this macro to let mbed TLS use your own implementation of a
* hardware entropy collector.
*
* Your function must be called \c mbedtls_hardware_poll(), have the same
* prototype as declared in entropy_poll.h, and accept NULL as first argument.
*
* Uncomment to use your own hardware entropy collector.
*/
#define MBEDTLS_ENTROPY_HARDWARE_ALT
/**
* \def MBEDTLS_AES_ROM_TABLES
*
* Store the AES tables in ROM.
*
* Uncomment this macro to store the AES tables in ROM.
*/
#define MBEDTLS_AES_ROM_TABLES
/**
* \def MBEDTLS_CIPHER_MODE_CBC
*
* Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_CBC
/**
* \def MBEDTLS_CIPHER_MODE_CFB
*
* Enable Cipher Feedback mode (CFB) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_CFB
/**
* \def MBEDTLS_CIPHER_MODE_CTR
*
* Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_CTR
/**
* \def MBEDTLS_CIPHER_MODE_OFB
*
* Enable Output Feedback mode (OFB) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_OFB
/**
* \def MBEDTLS_CIPHER_MODE_XTS
*
* Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES.
*/
#define MBEDTLS_CIPHER_MODE_XTS
/**
* \def MBEDTLS_CIPHER_PADDING_PKCS7
*
* MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for
* specific padding modes in the cipher layer with cipher modes that support
* padding (e.g. CBC)
*
* If you disable all padding modes, only full blocks can be used with CBC.
*
* Enable padding modes in the cipher layer.
*/
#define MBEDTLS_CIPHER_PADDING_PKCS7
#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
#define MBEDTLS_CIPHER_PADDING_ZEROS
/**
* \def MBEDTLS_ECP_RESTARTABLE
*
* Enable "non-blocking" ECC operations that can return early and be resumed.
*
* This allows various functions to pause by returning
* #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module,
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in
* order to further progress and eventually complete their operation. This is
* controlled through mbedtls_ecp_set_max_ops() which limits the maximum
* number of ECC operations a function may perform before pausing; see
* mbedtls_ecp_set_max_ops() for more information.
*
* This is useful in non-threaded environments if you want to avoid blocking
* for too long on ECC (and, hence, X.509 or SSL/TLS) operations.
*
* Uncomment this macro to enable restartable ECC computations.
*
* \note This option only works with the default software implementation of
* elliptic curve functionality. It is incompatible with
* MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT, MBEDTLS_ECDSA_XXX_ALT
* and MBEDTLS_ECDH_LEGACY_CONTEXT.
*/
#ifdef CONFIG_MBEDTLS_ECP_RESTARTABLE
#define MBEDTLS_ECP_RESTARTABLE
#endif
/**
* \def MBEDTLS_ECDH_LEGACY_CONTEXT
*
* Use a backward compatible ECDH context.
*
* Mbed TLS supports two formats for ECDH contexts (#mbedtls_ecdh_context
* defined in `ecdh.h`). For most applications, the choice of format makes
* no difference, since all library functions can work with either format,
* except that the new format is incompatible with MBEDTLS_ECP_RESTARTABLE.
* The new format used when this option is disabled is smaller
* (56 bytes on a 32-bit platform). In future versions of the library, it
* will support alternative implementations of ECDH operations.
* The new format is incompatible with applications that access
* context fields directly and with restartable ECP operations.
*
* Define this macro if you enable MBEDTLS_ECP_RESTARTABLE or if you
* want to access ECDH context fields directly. Otherwise you should
* comment out this macro definition.
*
* This option has no effect if #MBEDTLS_ECDH_C is not enabled.
*
* \note This configuration option is experimental. Future versions of the
* library may modify the way the ECDH context layout is configured
* and may modify the layout of the new context type.
*/
#ifdef CONFIG_MBEDTLS_ECDH_LEGACY_CONTEXT
#define MBEDTLS_ECDH_LEGACY_CONTEXT
#endif
/**
* \def MBEDTLS_CMAC_C
*
* Enable the CMAC (Cipher-based Message Authentication Code) mode for block
* ciphers.
*
* \note When #MBEDTLS_CMAC_ALT is active, meaning that the underlying
* implementation of the CMAC algorithm is provided by an alternate
* implementation, that alternate implementation may opt to not support
* AES-192 or 3DES as underlying block ciphers for the CMAC operation.
*
* Module: library/cmac.c
*
* Requires: MBEDTLS_AES_C or MBEDTLS_DES_C
*
*/
#ifdef CONFIG_MBEDTLS_CMAC_C
#define MBEDTLS_CMAC_C
#endif
/**
* \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
*
* MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
* module. By default all supported curves are enabled.
*
* Comment macros to disable the curve and functions for it
*/
/* Short Weierstrass curves (supporting ECP, ECDH, ECDSA) */
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED
#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP192R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED
#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP224R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED
#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP256R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED
#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP384R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED
#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP521R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED
#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP192K1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED
#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP224K1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED
#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP256K1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED
#define MBEDTLS_ECP_DP_BP256R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_BP256R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED
#define MBEDTLS_ECP_DP_BP384R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_BP384R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED
#define MBEDTLS_ECP_DP_BP512R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_BP512R1_ENABLED
#endif
/* Montgomery curves (supporting ECP) */
#ifdef CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED
#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
#else
#undef MBEDTLS_ECP_DP_CURVE25519_ENABLED
#endif
#ifdef MBEDTLS_ECP_DP_CURVE448_ENABLED
#undef MBEDTLS_ECP_DP_CURVE448_ENABLED
#endif
/**
* \def MBEDTLS_ECP_NIST_OPTIM
*
* Enable specific 'modulo p' routines for each NIST prime.
* Depending on the prime and architecture, makes operations 4 to 8 times
* faster on the corresponding curve.
*
* Comment this macro to disable NIST curves optimisation.
*/
#ifdef CONFIG_MBEDTLS_ECP_NIST_OPTIM
#define MBEDTLS_ECP_NIST_OPTIM
#else
#undef MBEDTLS_ECP_NIST_OPTIM
#endif
/**
* \def MBEDTLS_ECDSA_DETERMINISTIC
*
* Enable deterministic ECDSA (RFC 6979).
* Standard ECDSA is "fragile" in the sense that lack of entropy when signing
* may result in a compromise of the long-term signing key. This is avoided by
* the deterministic variant.
*
* Requires: MBEDTLS_HMAC_DRBG_C, MBEDTLS_ECDSA_C
*
* Comment this macro to disable deterministic ECDSA.
*/
#ifdef CONFIG_MBEDTLS_ECDSA_DETERMINISTIC
#define MBEDTLS_ECDSA_DETERMINISTIC
#else
#undef MBEDTLS_ECDSA_DETERMINISTIC
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
*
* Enable the PSK based ciphersuite modes in SSL / TLS.
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_PSK
#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
*
* Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_DHM_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK
#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
*
* Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
*
* Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK
#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
*
* Enable the RSA-only based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_RSA
#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
*
* Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA
#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
*
* Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
*
* Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C,
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
*
* Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
*
* Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA
#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
*
* Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
*
* \warning This is currently experimental. EC J-PAKE support is based on the
* Thread v1.0.0 specification; incompatible changes to the specification
* might still happen. For this reason, this is disabled by default.
*
* Requires: MBEDTLS_ECJPAKE_C
* MBEDTLS_SHA256_C
* MBEDTLS_ECP_DP_SECP256R1_ENABLED
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE
#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
#endif
/**
* \def MBEDTLS_PK_PARSE_EC_EXTENDED
*
* Enhance support for reading EC keys using variants of SEC1 not allowed by
* RFC 5915 and RFC 5480.
*
* Currently this means parsing the SpecifiedECDomain choice of EC
* parameters (only known groups are supported, not arbitrary domains, to
* avoid validation issues).
*
* Disable if you only need to support RFC 5915 + 5480 key formats.
*/
#define MBEDTLS_PK_PARSE_EC_EXTENDED
/**
* \def MBEDTLS_ERROR_STRERROR_DUMMY
*
* Enable a dummy error function to make use of mbedtls_strerror() in
* third party libraries easier when MBEDTLS_ERROR_C is disabled
* (no effect when MBEDTLS_ERROR_C is enabled).
*
* You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're
* not using mbedtls_strerror() or error_strerror() in your application.
*
* Disable if you run into name conflicts and want to really remove the
* mbedtls_strerror()
*/
#define MBEDTLS_ERROR_STRERROR_DUMMY
/**
* \def MBEDTLS_GENPRIME
*
* Enable the prime-number generation code.
*
* Requires: MBEDTLS_BIGNUM_C
*/
#define MBEDTLS_GENPRIME
/**
* \def MBEDTLS_FS_IO
*
* Enable functions that use the filesystem.
*/
#define MBEDTLS_FS_IO
/**
* \def MBEDTLS_NO_PLATFORM_ENTROPY
*
* Do not use built-in platform entropy functions.
* This is useful if your platform does not support
* standards like the /dev/urandom or Windows CryptoAPI.
*
* Uncomment this macro to disable the built-in platform entropy functions.
*/
#define MBEDTLS_NO_PLATFORM_ENTROPY
/**
* \def MBEDTLS_PK_RSA_ALT_SUPPORT
*
* Support external private RSA keys (eg from a HSM) in the PK layer.
*
* Comment this macro to disable support for external private RSA keys.
*/
#define MBEDTLS_PK_RSA_ALT_SUPPORT
/**
* \def MBEDTLS_PKCS1_V15
*
* Enable support for PKCS#1 v1.5 encoding.
*
* Requires: MBEDTLS_RSA_C
*
* This enables support for PKCS#1 v1.5 operations.
*/
#define MBEDTLS_PKCS1_V15
/**
* \def MBEDTLS_PKCS1_V21
*
* Enable support for PKCS#1 v2.1 encoding.
*
* Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C
*
* This enables support for RSAES-OAEP and RSASSA-PSS operations.
*/
#define MBEDTLS_PKCS1_V21
/**
* \def MBEDTLS_SELF_TEST
*
* Enable the checkup functions (*_self_test).
*/
#define MBEDTLS_SELF_TEST
/**
* \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
*
* Enable sending of alert messages in case of encountered errors as per RFC.
* If you choose not to send the alert messages, mbed TLS can still communicate
* with other servers, only debugging of failures is harder.
*
* The advantage of not sending alert messages, is that no information is given
* about reasons for failures thus preventing adversaries of gaining intel.
*
* Enable sending of all alert messages
*/
#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
/**
* \def MBEDTLS_SSL_DTLS_CONNECTION_ID
*
* Enable support for the DTLS Connection ID extension
* (version draft-ietf-tls-dtls-connection-id-05,
* https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05)
* which allows to identify DTLS connections across changes
* in the underlying transport.
*
* Setting this option enables the SSL APIs `mbedtls_ssl_set_cid()`,
* `mbedtls_ssl_get_peer_cid()` and `mbedtls_ssl_conf_cid()`.
* See the corresponding documentation for more information.
*
* \warning The Connection ID extension is still in draft state.
* We make no stability promises for the availability
* or the shape of the API controlled by this option.
*
* The maximum lengths of outgoing and incoming CIDs can be configured
* through the options
* - MBEDTLS_SSL_CID_OUT_LEN_MAX
* - MBEDTLS_SSL_CID_IN_LEN_MAX.
*
* Requires: MBEDTLS_SSL_PROTO_DTLS
*
* Uncomment to enable the Connection ID extension.
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_DTLS_CONNECTION_ID
#else
#undef MBEDTLS_SSL_DTLS_CONNECTION_ID
#endif
/**
* \def MBEDTLS_SSL_CONTEXT_SERIALIZATION
*
* Enable serialization of the TLS context structures, through use of the
* functions mbedtls_ssl_context_save() and mbedtls_ssl_context_load().
*
* This pair of functions allows one side of a connection to serialize the
* context associated with the connection, then free or re-use that context
* while the serialized state is persisted elsewhere, and finally deserialize
* that state to a live context for resuming read/write operations on the
* connection. From a protocol perspective, the state of the connection is
* unaffected, in particular this is entirely transparent to the peer.
*
* Note: this is distinct from TLS session resumption, which is part of the
* protocol and fully visible by the peer. TLS session resumption enables
* establishing new connections associated to a saved session with shorter,
* lighter handshakes, while context serialization is a local optimization in
* handling a single, potentially long-lived connection.
*
* Enabling these APIs makes some SSL structures larger, as 64 extra bytes are
* saved after the handshake to allow for more efficient serialization, so if
* you don't need this feature you'll save RAM by disabling it.
*
* Comment to disable the context serialization APIs.
*/
#ifdef CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION
#define MBEDTLS_SSL_CONTEXT_SERIALIZATION
#else
#undef MBEDTLS_SSL_CONTEXT_SERIALIZATION
#endif
/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
*
* Enable support for Encrypt-then-MAC, RFC 7366.
*
* This allows peers that both support it to use a more robust protection for
* ciphersuites using CBC, providing deep resistance against timing attacks
* on the padding or underlying cipher.
*
* This only affects CBC ciphersuites, and is useless if none is defined.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_2
*
* Comment this macro to disable support for Encrypt-then-MAC
*/
#ifdef CONFIG_MBEDTLS_TLS_ENABLED
#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
#else
#undef MBEDTLS_SSL_ENCRYPT_THEN_MAC
#endif
/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
*
* Enable support for RFC 7627: Session Hash and Extended Master Secret
* Extension.
*
* This was introduced as "the proper fix" to the Triple Handshake familiy of
* attacks, but it is recommended to always use it (even if you disable
* renegotiation), since it actually fixes a more fundamental issue in the
* original SSL/TLS design, and has implications beyond Triple Handshake.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_2
*
* Comment this macro to disable support for Extended Master Secret.
*/
#ifdef CONFIG_MBEDTLS_TLS_ENABLED
#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
#else
#undef MBEDTLS_SSL_EXTENDED_MASTER_SECRET
#endif
/**
* \def MBEDTLS_SSL_FALLBACK_SCSV
*
* Enable support for RFC 7507: Fallback Signaling Cipher Suite Value (SCSV)
* for Preventing Protocol Downgrade Attacks.
*
* For servers, it is recommended to always enable this, unless you support
* only one version of TLS, or know for sure that none of your clients
* implements a fallback strategy.
*
* For clients, you only need this if you're using a fallback strategy, which
* is not recommended in the first place, unless you absolutely need it to
* interoperate with buggy (version-intolerant) servers.
*
* Comment this macro to disable support for FALLBACK_SCSV
*/
#define MBEDTLS_SSL_FALLBACK_SCSV
/**
* \def MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
*
* This option controls the availability of the API mbedtls_ssl_get_peer_cert()
* giving access to the peer's certificate after completion of the handshake.
*
* Unless you need mbedtls_ssl_peer_cert() in your application, it is
* recommended to disable this option for reduced RAM usage.
*
* \note If this option is disabled, mbedtls_ssl_get_peer_cert() is still
* defined, but always returns \c NULL.
*
* \note This option has no influence on the protection against the
* triple handshake attack. Even if it is disabled, Mbed TLS will
* still ensure that certificates do not change during renegotiation,
* for exaple by keeping a hash of the peer's certificate.
*
* Comment this macro to disable storing the peer's certificate
* after the handshake.
*/
#ifdef CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
#define MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
#else
#undef MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
#endif
/**
* \def MBEDTLS_SSL_CBC_RECORD_SPLITTING
*
* Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0.
*
* This is a countermeasure to the BEAST attack, which also minimizes the risk
* of interoperability issues compared to sending 0-length records.
*
* Comment this macro to disable 1/n-1 record splitting.
*/
#if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1)
#define MBEDTLS_SSL_CBC_RECORD_SPLITTING
#else
#undef MBEDTLS_SSL_CBC_RECORD_SPLITTING
#endif
/**
* \def MBEDTLS_SSL_RENEGOTIATION
*
* Enable support for TLS renegotiation.
*
* The two main uses of renegotiation are (1) refresh keys on long-lived
* connections and (2) client authentication after the initial handshake.
* If you don't need renegotiation, it's probably better to disable it, since
* it has been associated with security issues in the past and is easy to
* misuse/misunderstand.
*
* Comment this to disable support for renegotiation.
*
* \note Even if this option is disabled, both client and server are aware
* of the Renegotiation Indication Extension (RFC 5746) used to
* prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
* (See \c mbedtls_ssl_conf_legacy_renegotiation for the
* configuration of this extension).
*
*/
#ifdef CONFIG_MBEDTLS_SSL_RENEGOTIATION
#define MBEDTLS_SSL_RENEGOTIATION
#else
#undef MBEDTLS_SSL_RENEGOTIATION
#endif
/**
* \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
*
* Enable support for RFC 6066 max_fragment_length extension in SSL.
*
* Comment this macro to disable support for the max_fragment_length extension
*/
#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
/**
* \def MBEDTLS_SSL_PROTO_TLS1_2
*
* Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
*
* Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C
* (Depends on ciphersuites)
*
* Comment this macro to disable support for TLS 1.2 / DTLS 1.2
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_TLS1_2
#define MBEDTLS_SSL_PROTO_TLS1_2
#else
#undef MBEDTLS_SSL_PROTO_TLS1_2
#endif
/**
* \def MBEDTLS_SSL_PROTO_TLS1_3
*
* Enable support for TLS 1.3.
*
* \note The support for TLS 1.3 is not comprehensive yet, in particular
* pre-shared keys are not supported.
* See docs/architecture/tls13-support.md for a description of the TLS
* 1.3 support that this option enables.
*
* Uncomment this macro to enable the support for TLS 1.3.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_TLS1_3
#define MBEDTLS_SSL_PROTO_TLS1_3
#else
#undef MBEDTLS_SSL_PROTO_TLS1_3
#endif
/**
* \def MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
*
* Enable TLS 1.3 middlebox compatibility mode.
*
* As specified in Section D.4 of RFC 8446, TLS 1.3 offers a compatibility
* mode to make a TLS 1.3 connection more likely to pass through middle boxes
* expecting TLS 1.2 traffic.
*
* Turning on the compatibility mode comes at the cost of a few added bytes
* on the wire, but it doesn't affect compatibility with TLS 1.3 implementations
* that don't use it. Therefore, unless transmission bandwidth is critical and
* you know that middlebox compatibility issues won't occur, it is therefore
* recommended to set this option.
*
* Comment to disable compatibility mode for TLS 1.3. If
* MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
* effect on the build.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
#define MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
#else
#undef MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
#endif
/**
* \def MBEDTLS_SSL_PROTO_DTLS
*
* Enable support for DTLS (all available versions).
*
* Enable this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_2
*
* Comment this macro to disable support for DTLS
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_PROTO_DTLS
#else
#undef MBEDTLS_SSL_PROTO_DTLS
#endif
/**
* \def MBEDTLS_SSL_ALPN
*
* Enable support for RFC 7301 Application Layer Protocol Negotiation.
*
* Comment this macro to disable support for ALPN.
*/
#ifdef CONFIG_MBEDTLS_SSL_ALPN
#define MBEDTLS_SSL_ALPN
#else
#undef MBEDTLS_SSL_ALPN
#endif
/**
* \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
*
* Enable support for the anti-replay mechanism in DTLS.
*
* Requires: MBEDTLS_SSL_TLS_C
* MBEDTLS_SSL_PROTO_DTLS
*
* \warning Disabling this is often a security risk!
* See mbedtls_ssl_conf_dtls_anti_replay() for details.
*
* Comment this to disable anti-replay in DTLS.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
#else
#undef MBEDTLS_SSL_DTLS_ANTI_REPLAY
#endif
/**
* \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
*
* Enable support for HelloVerifyRequest on DTLS servers.
*
* This feature is highly recommended to prevent DTLS servers being used as
* amplifiers in DoS attacks against other hosts. It should always be enabled
* unless you know for sure amplification cannot be a problem in the
* environment in which your server operates.
*
* \warning Disabling this can ba a security risk! (see above)
*
* Requires: MBEDTLS_SSL_PROTO_DTLS
*
* Comment this to disable support for HelloVerifyRequest.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
#else
#undef MBEDTLS_SSL_DTLS_HELLO_VERIFY
#endif
/**
* \def MBEDTLS_SSL_DTLS_SRTP
*
* Enable support for negotiation of DTLS-SRTP (RFC 5764)
* through the use_srtp extension.
*
* \note This feature provides the minimum functionality required
* to negotiate the use of DTLS-SRTP and to allow the derivation of
* the associated SRTP packet protection key material.
* In particular, the SRTP packet protection itself, as well as the
* demultiplexing of RTP and DTLS packets at the datagram layer
* (see Section 5 of RFC 5764), are not handled by this feature.
* Instead, after successful completion of a handshake negotiating
* the use of DTLS-SRTP, the extended key exporter API
* mbedtls_ssl_conf_export_keys_ext_cb() should be used to implement
* the key exporter described in Section 4.2 of RFC 5764 and RFC 5705
* (this is implemented in the SSL example programs).
* The resulting key should then be passed to an SRTP stack.
*
* Setting this option enables the runtime API
* mbedtls_ssl_conf_dtls_srtp_protection_profiles()
* through which the supported DTLS-SRTP protection
* profiles can be configured. You must call this API at
* runtime if you wish to negotiate the use of DTLS-SRTP.
*
* Requires: MBEDTLS_SSL_PROTO_DTLS
*
* Uncomment this to enable support for use_srtp extension.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_SRTP
#else
#undef MBEDTLS_SSL_DTLS_SRTP
#endif
/**
* \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
*
* Enable server-side support for clients that reconnect from the same port.
*
* Some clients unexpectedly close the connection and try to reconnect using the
* same source port. This needs special support from the server to handle the
* new connection securely, as described in section 4.2.8 of RFC 6347. This
* flag enables that support.
*
* Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
*
* Comment this to disable support for clients reusing the source port.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
#else
#undef MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
#endif
/**
* \def MBEDTLS_SSL_SESSION_TICKETS
*
* Enable support for RFC 5077 session tickets in SSL.
* Client-side, provides full support for session tickets (maintainance of a
* session store remains the responsibility of the application, though).
* Server-side, you also need to provide callbacks for writing and parsing
* tickets, including authenticated encryption and key management. Example
* callbacks are provided by MBEDTLS_SSL_TICKET_C.
*
* Comment this macro to disable support for SSL session tickets
*/
#ifdef CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS
#define MBEDTLS_SSL_SESSION_TICKETS
#else
#undef MBEDTLS_SSL_SESSION_TICKETS
#endif
/**
* \def MBEDTLS_SSL_EXPORT_KEYS
*
* Enable support for exporting key block and master secret.
* This is required for certain users of TLS, e.g. EAP-TLS.
*
* Comment this macro to disable support for key export
*/
#define MBEDTLS_SSL_EXPORT_KEYS
/**
* \def MBEDTLS_SSL_SERVER_NAME_INDICATION
*
* Enable support for RFC 6066 server name indication (SNI) in SSL.
*
* Requires: MBEDTLS_X509_CRT_PARSE_C
*
* Comment this macro to disable support for server name indication in SSL
*/
#define MBEDTLS_SSL_SERVER_NAME_INDICATION
/**
* \def MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
*
* When this option is enabled, the SSL buffer will be resized automatically
* based on the negotiated maximum fragment length in each direction.
*
* Requires: MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
*/
#ifdef CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
#define MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
#else
#undef MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
#endif
/**
*
* \def MBEDTLS_VERSION_FEATURES
*
* Allow run-time checking of compile-time enabled features. Thus allowing users
* to check at run-time if the library is for instance compiled with threading
* support via mbedtls_version_check_feature().
*
* Requires: MBEDTLS_VERSION_C
*
* Comment this to disable run-time checking and save ROM space
*/
#define MBEDTLS_VERSION_FEATURES
/**
* \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
*
* Enable parsing and verification of X.509 certificates, CRLs and CSRS
* signed with RSASSA-PSS (aka PKCS#1 v2.1).
*
* Comment this macro to disallow using RSASSA-PSS in certificates.
*/
#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
/* \} name SECTION: mbed TLS feature support */
/**
* \name SECTION: mbed TLS modules
*
* This section enables or disables entire modules in mbed TLS
* \{
*/
/**
* \def MBEDTLS_AESNI_C
*
* Enable AES-NI support on x86-64.
*
* Module: library/aesni.c
* Caller: library/aes.c
*
* Requires: MBEDTLS_HAVE_ASM
*
* This modules adds support for the AES-NI instructions on x86-64
*/
#define MBEDTLS_AESNI_C
/**
* \def MBEDTLS_AES_C
*
* Enable the AES block cipher.
*
* Module: library/aes.c
* Caller: library/ssl_tls.c
* library/pem.c
* library/ctr_drbg.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
*
* PEM_PARSE uses AES for decrypting encrypted keys.
*/
#ifdef CONFIG_MBEDTLS_AES_C
#define MBEDTLS_AES_C
#else
#undef MBEDTLS_AES_C
#endif
/**
* \def MBEDTLS_ASN1_PARSE_C
*
* Enable the generic ASN1 parser.
*
* Module: library/asn1.c
* Caller: library/x509.c
* library/dhm.c
* library/pkcs12.c
* library/pkcs5.c
* library/pkparse.c
*/
#define MBEDTLS_ASN1_PARSE_C
/**
* \def MBEDTLS_ASN1_WRITE_C
*
* Enable the generic ASN1 writer.
*
* Module: library/asn1write.c
* Caller: library/ecdsa.c
* library/pkwrite.c
* library/x509_create.c
* library/x509write_crt.c
* library/mbedtls_x509write_csr.c
*/
#define MBEDTLS_ASN1_WRITE_C
/**
* \def MBEDTLS_BASE64_C
*
* Enable the Base64 module.
*
* Module: library/base64.c
* Caller: library/pem.c
*
* This module is required for PEM support (required by X.509).
*/
#define MBEDTLS_BASE64_C
/**
* \def MBEDTLS_BIGNUM_C
*
* Enable the multi-precision integer library.
*
* Module: library/bignum.c
* Caller: library/dhm.c
* library/ecp.c
* library/ecdsa.c
* library/rsa.c
* library/ssl_tls.c
*
* This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
*/
#define MBEDTLS_BIGNUM_C
/**
* \def MBEDTLS_BLOWFISH_C
*
* Enable the Blowfish block cipher.
*
* Module: library/blowfish.c
*/
#ifdef CONFIG_MBEDTLS_BLOWFISH_C
#define MBEDTLS_BLOWFISH_C
#else
#undef MBEDTLS_BLOWFISH_C
#endif
/**
* \def MBEDTLS_CAMELLIA_C
*
* Enable the Camellia block cipher.
*
* Module: library/camellia.c
* Caller: library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
*/
#ifdef CONFIG_MBEDTLS_CAMELLIA_C
#define MBEDTLS_CAMELLIA_C
#else
#undef MBEDTLS_CAMELLIA_C
#endif
/**
* \def MBEDTLS_CCM_C
*
* Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
*
* Module: library/ccm.c
*
* Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C
*
* This module enables the AES-CCM ciphersuites, if other requisites are
* enabled as well.
*/
#ifdef CONFIG_MBEDTLS_CCM_C
#define MBEDTLS_CCM_C
#else
#undef MBEDTLS_CCM_C
#endif
/**
* \def MBEDTLS_CERTS_C
*
* Enable the test certificates.
*
* Module: library/certs.c
* Caller:
*
* This module is used for testing (ssl_client/server).
*/
#define MBEDTLS_CERTS_C
/**
* \def MBEDTLS_CHACHA20_C
*
* Enable the ChaCha20 stream cipher.
*
* Module: library/chacha20.c
*/
#ifdef CONFIG_MBEDTLS_CHACHA20_C
#define MBEDTLS_CHACHA20_C
#else
#undef MBEDTLS_CHACHA20_C
#endif
/**
* \def MBEDTLS_CHACHAPOLY_C
*
* Enable the ChaCha20-Poly1305 AEAD algorithm.
*
* Module: library/chachapoly.c
*
* This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C
*/
#ifdef CONFIG_MBEDTLS_CHACHAPOLY_C
#define MBEDTLS_CHACHAPOLY_C
#else
#undef MBEDTLS_CHACHAPOLY_C
#endif
/**
* \def MBEDTLS_CIPHER_C
*
* Enable the generic cipher layer.
*
* Module: library/cipher.c
* Caller: library/ssl_tls.c
*
* Uncomment to enable generic cipher wrappers.
*/
#define MBEDTLS_CIPHER_C
/**
* \def MBEDTLS_CTR_DRBG_C
*
* Enable the CTR_DRBG AES-256-based random generator.
*
* Module: library/ctr_drbg.c
* Caller:
*
* Requires: MBEDTLS_AES_C
*
* This module provides the CTR_DRBG AES-256 random number generator.
*/
#define MBEDTLS_CTR_DRBG_C
/**
* \def MBEDTLS_DEBUG_C
*
* Enable the debug functions.
*
* Module: library/debug.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
*
* This module provides debugging functions.
*/
#if CONFIG_MBEDTLS_DEBUG
#define MBEDTLS_DEBUG_C
#else
#undef MBEDTLS_DEBUG_C
#endif
/**
* \def MBEDTLS_DES_C
*
* Enable the DES block cipher.
*
* Module: library/des.c
* Caller: library/pem.c
* library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
*
* PEM_PARSE uses DES/3DES for decrypting encrypted keys.
*/
#ifdef CONFIG_MBEDTLS_DES_C
#define MBEDTLS_DES_C
#else
#undef MBEDTLS_DES_C
#endif
/**
* \def MBEDTLS_DHM_C
*
* Enable the Diffie-Hellman-Merkle module.
*
* Module: library/dhm.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
*
* This module is used by the following key exchanges:
* DHE-RSA, DHE-PSK
*/
#ifdef CONFIG_MBEDTLS_DHM_C
#define MBEDTLS_DHM_C
#else
#undef MBEDTLS_DHM_C
#endif
/**
* \def MBEDTLS_ECDH_C
*
* Enable the elliptic curve Diffie-Hellman library.
*
* Module: library/ecdh.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
*
* This module is used by the following key exchanges:
* ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
*
* Requires: MBEDTLS_ECP_C
*/
#ifdef CONFIG_MBEDTLS_ECDH_C
#define MBEDTLS_ECDH_C
#else
#undef MBEDTLS_ECDH_C
#endif
/**
* \def MBEDTLS_ECDSA_C
*
* Enable the elliptic curve DSA library.
*
* Module: library/ecdsa.c
* Caller:
*
* This module is used by the following key exchanges:
* ECDHE-ECDSA
*
* Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C,
* and at least one MBEDTLS_ECP_DP_XXX_ENABLED for a
* short Weierstrass curve.
*/
#ifdef CONFIG_MBEDTLS_ECDSA_C
#define MBEDTLS_ECDSA_C
#else
#undef MBEDTLS_ECDSA_C
#endif
/**
* \def MBEDTLS_ECJPAKE_C
*
* Enable the elliptic curve J-PAKE library.
*
* \warning This is currently experimental. EC J-PAKE support is based on the
* Thread v1.0.0 specification; incompatible changes to the specification
* might still happen. For this reason, this is disabled by default.
*
* Module: library/ecjpake.c
* Caller:
*
* This module is used by the following key exchanges:
* ECJPAKE
*
* Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
*/
#ifdef CONFIG_MBEDTLS_ECJPAKE_C
#define MBEDTLS_ECJPAKE_C
#else
#undef MBEDTLS_ECJPAKE_C
#endif
/**
* \def MBEDTLS_ECP_C
*
* Enable the elliptic curve over GF(p) library.
*
* Module: library/ecp.c
* Caller: library/ecdh.c
* library/ecdsa.c
* library/ecjpake.c
*
* Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
*/
#ifdef CONFIG_MBEDTLS_ECP_C
#define MBEDTLS_ECP_C
#else
#undef MBEDTLS_ECP_C
#endif
/**
* \def MBEDTLS_ENTROPY_C
*
* Enable the platform-specific entropy code.
*
* Module: library/entropy.c
* Caller:
*
* Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C
*
* This module provides a generic entropy pool
*/
#define MBEDTLS_ENTROPY_C
/**
* \def MBEDTLS_ERROR_C
*
* Enable error code to error string conversion.
*
* Module: library/error.c
* Caller:
*
* This module enables mbedtls_strerror().
*/
#define MBEDTLS_ERROR_C
/**
* \def MBEDTLS_GCM_C
*
* Enable the Galois/Counter Mode (GCM).
*
* Module: library/gcm.c
*
* Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C or MBEDTLS_ARIA_C
*
* This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
* requisites are enabled as well.
*/
#ifdef CONFIG_MBEDTLS_GCM_C
#define MBEDTLS_GCM_C
#else
#undef MBEDTLS_GCM_C
#endif
/**
* \def MBEDTLS_HKDF_C
*
* Enable the HKDF algorithm (RFC 5869).
*
* Module: library/hkdf.c
* Caller:
*
* Requires: MBEDTLS_MD_C
*
* This module enables support for the Hashed Message Authentication Code
* (HMAC)-based key derivation function (HKDF).
*/
#ifdef CONFIG_MBEDTLS_HKDF_C
#define MBEDTLS_HKDF_C
#else
#undef MBEDTLS_HKDF_C
#endif
/**
* \def MBEDTLS_HMAC_DRBG_C
*
* Enable the HMAC_DRBG random generator.
*
* Module: library/hmac_drbg.c
* Caller:
*
* Requires: MBEDTLS_MD_C
*
* Uncomment to enable the HMAC_DRBG random number geerator.
*/
#define MBEDTLS_HMAC_DRBG_C
/**
* \def MBEDTLS_MD_C
*
* Enable the generic message digest layer.
*
* Module: library/mbedtls_md.c
* Caller:
*
* Uncomment to enable generic message digest wrappers.
*/
#define MBEDTLS_MD_C
/**
* \def MBEDTLS_MD5_C
*
* Enable the MD5 hash algorithm.
*
* Module: library/mbedtls_md5.c
* Caller: library/mbedtls_md.c
* library/pem.c
* library/ssl_tls.c
*
* This module is required for SSL/TLS and X.509.
* PEM_PARSE uses MD5 for decrypting encrypted keys.
*/
#define MBEDTLS_MD5_C
/**
* \def MBEDTLS_NET_C
*
* Enable the TCP/IP networking routines.
*
* Module: library/net.c
*
* This module provides TCP/IP networking routines.
*/
#ifdef MBEDTLS_NET_C
#undef MBEDTLS_NET_C
#endif
/**
* \def MBEDTLS_OID_C
*
* Enable the OID database.
*
* Module: library/oid.c
* Caller: library/asn1write.c
* library/pkcs5.c
* library/pkparse.c
* library/pkwrite.c
* library/rsa.c
* library/x509.c
* library/x509_create.c
* library/mbedtls_x509_crl.c
* library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
* library/x509write_crt.c
* library/mbedtls_x509write_csr.c
*
* This modules translates between OIDs and internal values.
*/
#define MBEDTLS_OID_C
/**
* \def MBEDTLS_PADLOCK_C
*
* Enable VIA Padlock support on x86.
*
* Module: library/padlock.c
* Caller: library/aes.c
*
* Requires: MBEDTLS_HAVE_ASM
*
* This modules adds support for the VIA PadLock on x86.
*/
#define MBEDTLS_PADLOCK_C
/**
* \def MBEDTLS_PEM_PARSE_C
*
* Enable PEM decoding / parsing.
*
* Module: library/pem.c
* Caller: library/dhm.c
* library/pkparse.c
* library/mbedtls_x509_crl.c
* library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
*
* Requires: MBEDTLS_BASE64_C
*
* This modules adds support for decoding / parsing PEM files.
*/
#ifdef CONFIG_MBEDTLS_PEM_PARSE_C
#define MBEDTLS_PEM_PARSE_C
#else
#undef MBEDTLS_PEM_PARSE_C
#endif
/**
* \def MBEDTLS_PEM_WRITE_C
*
* Enable PEM encoding / writing.
*
* Module: library/pem.c
* Caller: library/pkwrite.c
* library/x509write_crt.c
* library/mbedtls_x509write_csr.c
*
* Requires: MBEDTLS_BASE64_C
*
* This modules adds support for encoding / writing PEM files.
*/
#ifdef CONFIG_MBEDTLS_PEM_WRITE_C
#define MBEDTLS_PEM_WRITE_C
#else
#undef MBEDTLS_PEM_WRITE_C
#endif
/**
* \def MBEDTLS_PK_C
*
* Enable the generic public (asymetric) key layer.
*
* Module: library/pk.c
* Caller: library/ssl_tls.c
* library/ssl_cli.c
* library/ssl_srv.c
*
* Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C
*
* Uncomment to enable generic public key wrappers.
*/
#define MBEDTLS_PK_C
/**
* \def MBEDTLS_PK_PARSE_C
*
* Enable the generic public (asymetric) key parser.
*
* Module: library/pkparse.c
* Caller: library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
*
* Requires: MBEDTLS_PK_C
*
* Uncomment to enable generic public key parse functions.
*/
#define MBEDTLS_PK_PARSE_C
/**
* \def MBEDTLS_PK_WRITE_C
*
* Enable the generic public (asymetric) key writer.
*
* Module: library/pkwrite.c
* Caller: library/x509write.c
*
* Requires: MBEDTLS_PK_C
*
* Uncomment to enable generic public key write functions.
*/
#define MBEDTLS_PK_WRITE_C
/**
* \def MBEDTLS_PKCS5_C
*
* Enable PKCS#5 functions.
*
* Module: library/pkcs5.c
*
* Requires: MBEDTLS_MD_C
*
* This module adds support for the PKCS#5 functions.
*/
#define MBEDTLS_PKCS5_C
/**
* \def MBEDTLS_PKCS12_C
*
* Enable PKCS#12 PBE functions.
* Adds algorithms for parsing PKCS#8 encrypted private keys
*
* Module: library/pkcs12.c
* Caller: library/pkparse.c
*
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C
*
* This module enables PKCS#12 functions.
*/
#define MBEDTLS_PKCS12_C
/**
* \def MBEDTLS_PLATFORM_C
*
* Enable the platform abstraction layer that allows you to re-assign
* functions like calloc(), free(), snprintf(), printf(), fprintf(), exit().
*
* Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT
* or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned
* above to be specified at runtime or compile time respectively.
*
* \note This abstraction layer must be enabled on Windows (including MSYS2)
* as other module rely on it for a fixed snprintf implementation.
*
* Module: library/platform.c
* Caller: Most other .c files
*
* This module enables abstraction of common (libc) functions.
*/
#define MBEDTLS_PLATFORM_C
/**
* \def MBEDTLS_POLY1305_C
*
* Enable the Poly1305 MAC algorithm.
*
* Module: library/poly1305.c
* Caller: library/chachapoly.c
*/
#ifdef CONFIG_MBEDTLS_POLY1305_C
#define MBEDTLS_POLY1305_C
#else
#undef MBEDTLS_POLY1305_C
#endif
/**
* \def MBEDTLS_RIPEMD160_C
*
* Enable the RIPEMD-160 hash algorithm.
*
* Module: library/mbedtls_ripemd160.c
* Caller: library/mbedtls_md.c
*
*/
#ifdef CONFIG_MBEDTLS_RIPEMD160_C
#define MBEDTLS_RIPEMD160_C
#else
#undef MBEDTLS_RIPEMD160_C
#endif
/**
* \def MBEDTLS_RSA_C
*
* Enable the RSA public-key cryptosystem.
*
* Module: library/rsa.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
* library/x509.c
*
* This module is used by the following key exchanges:
* RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
*
* Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C
*/
#define MBEDTLS_RSA_C
/**
* \def MBEDTLS_SHA1_C
*
* Enable the SHA1 cryptographic hash algorithm.
*
* Module: library/mbedtls_sha1.c
* Caller: library/mbedtls_md.c
* library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
* library/x509write_crt.c
*
* This module is required for SSL/TLS and SHA1-signed certificates.
*/
#define MBEDTLS_SHA1_C
/**
* \def MBEDTLS_SHA256_C
*
* Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
*
* Module: library/mbedtls_sha256.c
* Caller: library/entropy.c
* library/mbedtls_md.c
* library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
*
* This module adds support for SHA-224 and SHA-256.
* This module is required for the SSL/TLS 1.2 PRF function.
*/
#define MBEDTLS_SHA256_C
/**
* \def MBEDTLS_SHA512_C
*
* Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
*
* Module: library/mbedtls_sha512.c
* Caller: library/entropy.c
* library/mbedtls_md.c
* library/ssl_cli.c
* library/ssl_srv.c
*
* This module adds support for SHA-384 and SHA-512.
*/
#ifdef CONFIG_MBEDTLS_SHA512_C
#define MBEDTLS_SHA384_C
#define MBEDTLS_SHA512_C
#else
#undef MBEDTLS_SHA384_C
#undef MBEDTLS_SHA512_C
#endif
/**
* \def MBEDTLS_SSL_CACHE_C
*
* Enable simple SSL cache implementation.
*
* Module: library/ssl_cache.c
* Caller:
*
* Requires: MBEDTLS_SSL_CACHE_C
*/
#define MBEDTLS_SSL_CACHE_C
/**
* \def MBEDTLS_SSL_COOKIE_C
*
* Enable basic implementation of DTLS cookies for hello verification.
*
* Module: library/ssl_cookie.c
* Caller:
*/
#define MBEDTLS_SSL_COOKIE_C
/**
* \def MBEDTLS_SSL_TICKET_C
*
* Enable an implementation of TLS server-side callbacks for session tickets.
*
* Module: library/ssl_ticket.c
* Caller:
*
* Requires: MBEDTLS_CIPHER_C
*/
#ifdef CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS
#define MBEDTLS_SSL_TICKET_C
#else
#undef MBEDTLS_SSL_TICKET_C
#endif
/**
* \def MBEDTLS_SSL_CLI_C
*
* Enable the SSL/TLS client code.
*
* Module: library/ssl_cli.c
* Caller:
*
* Requires: MBEDTLS_SSL_TLS_C
*
* This module is required for SSL/TLS client support.
*/
#ifdef CONFIG_MBEDTLS_TLS_CLIENT
#define MBEDTLS_SSL_CLI_C
#else
#undef MBEDTLS_SSL_CLI_C
#endif
/**
* \def MBEDTLS_SSL_SRV_C
*
* Enable the SSL/TLS server code.
*
* Module: library/ssl_srv.c
* Caller:
*
* Requires: MBEDTLS_SSL_TLS_C
*
* This module is required for SSL/TLS server support.
*/
#ifdef CONFIG_MBEDTLS_TLS_SERVER
#define MBEDTLS_SSL_SRV_C
#else
#undef MBEDTLS_SSL_SRV_C
#endif
/**
* \def MBEDTLS_SSL_TLS_C
*
* Enable the generic SSL/TLS code.
*
* Module: library/ssl_tls.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
*
* Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
* and at least one of the MBEDTLS_SSL_PROTO_XXX defines
*
* This module is required for SSL/TLS.
*/
#ifdef CONFIG_MBEDTLS_TLS_ENABLED
#define MBEDTLS_SSL_TLS_C
#else
#undef MBEDTLS_SSL_TLS_C
#endif
/**
* \def MBEDTLS_TIMING_C
*
* Enable the semi-portable timing interface.
*
* \note The provided implementation only works on POSIX/Unix (including Linux,
* BSD and OS X) and Windows. On other platforms, you can either disable that
* module and provide your own implementations of the callbacks needed by
* \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
* your own implementation of the whole module by setting
* \c MBEDTLS_TIMING_ALT in the current file.
*
* \note See also our Knowledge Base article about porting to a new
* environment:
* https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
*
* Module: library/timing.c
* Caller: library/havege.c
*
* This module is used by the HAVEGE random number generator.
*/
#ifdef MBEDTLS_TIMING_C
#undef MBEDTLS_TIMING_C
#endif
/**
* \def MBEDTLS_VERSION_C
*
* Enable run-time version information.
*
* Module: library/version.c
*
* This module provides run-time version information.
*/
#define MBEDTLS_VERSION_C
/**
* \def MBEDTLS_X509_USE_C
*
* Enable X.509 core for using certificates.
*
* Module: library/x509.c
* Caller: library/mbedtls_x509_crl.c
* library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
*
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C,
* MBEDTLS_PK_PARSE_C
*
* This module is required for the X.509 parsing modules.
*/
#define MBEDTLS_X509_USE_C
/**
* \def MBEDTLS_X509_CRT_PARSE_C
*
* Enable X.509 certificate parsing.
*
* Module: library/mbedtls_x509_crt.c
* Caller: library/ssl_cli.c
* library/ssl_srv.c
* library/ssl_tls.c
*
* Requires: MBEDTLS_X509_USE_C
*
* This module is required for X.509 certificate parsing.
*/
#define MBEDTLS_X509_CRT_PARSE_C
/**
* \def MBEDTLS_X509_CRL_PARSE_C
*
* Enable X.509 CRL parsing.
*
* Module: library/mbedtls_x509_crl.c
* Caller: library/mbedtls_x509_crt.c
*
* Requires: MBEDTLS_X509_USE_C
*
* This module is required for X.509 CRL parsing.
*/
#ifdef CONFIG_MBEDTLS_X509_CRL_PARSE_C
#define MBEDTLS_X509_CRL_PARSE_C
#else
#undef MBEDTLS_X509_CRL_PARSE_C
#endif
/**
* \def MBEDTLS_X509_CSR_PARSE_C
*
* Enable X.509 Certificate Signing Request (CSR) parsing.
*
* Module: library/mbedtls_x509_csr.c
* Caller: library/x509_crt_write.c
*
* Requires: MBEDTLS_X509_USE_C
*
* This module is used for reading X.509 certificate request.
*/
#ifdef CONFIG_MBEDTLS_X509_CSR_PARSE_C
#define MBEDTLS_X509_CSR_PARSE_C
#else
#undef MBEDTLS_X509_CSR_PARSE_C
#endif
/**
* \def MBEDTLS_X509_CREATE_C
*
* Enable X.509 core for creating certificates.
*
* Module: library/x509_create.c
*
* Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C
*
* This module is the basis for creating X.509 certificates and CSRs.
*/
#define MBEDTLS_X509_CREATE_C
/**
* \def MBEDTLS_X509_CRT_WRITE_C
*
* Enable creating X.509 certificates.
*
* Module: library/x509_crt_write.c
*
* Requires: MBEDTLS_X509_CREATE_C
*
* This module is required for X.509 certificate creation.
*/
#define MBEDTLS_X509_CRT_WRITE_C
/**
* \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
*
* Alow the X509 parser to not break-off when parsing an X509 certificate
* and encountering an unknown critical extension.
*
* Module: library/x509_crt.c
*
* Requires: MBEDTLS_X509_CRT_PARSE_C
*
* This module is supports loading of certificates with extensions that
* may not be supported by mbedtls.
*/
#ifdef CONFIG_MBEDTLS_ALLOW_UNSUPPORTED_CRITICAL_EXT
#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
#else
#undef MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
#endif
/**
* \def MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
*
* If set, this enables the X.509 API `mbedtls_x509_crt_verify_with_ca_cb()`
* and the SSL API `mbedtls_ssl_conf_ca_cb()` which allow users to configure
* the set of trusted certificates through a callback instead of a linked
* list.
*
* This is useful for example in environments where a large number of trusted
* certificates is present and storing them in a linked list isn't efficient
* enough, or when the set of trusted certificates changes frequently.
*
* See the documentation of `mbedtls_x509_crt_verify_with_ca_cb()` and
* `mbedtls_ssl_conf_ca_cb()` for more information.
*
* Uncomment to enable trusted certificate callbacks.
*/
#ifdef CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK
#define MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
#else
#undef MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
#endif
/**
* \def MBEDTLS_X509_CSR_WRITE_C
*
* Enable creating X.509 Certificate Signing Requests (CSR).
*
* Module: library/x509_csr_write.c
*
* Requires: MBEDTLS_X509_CREATE_C
*
* This module is required for X.509 certificate request writing.
*/
#define MBEDTLS_X509_CSR_WRITE_C
/**
* \def MBEDTLS_XTEA_C
*
* Enable the XTEA block cipher.
*
* Module: library/xtea.c
* Caller:
*/
#ifdef CONFIG_MBEDTLS_XTEA_C
#define MBEDTLS_XTEA_C
#else
#undef MBEDTLS_XTEA_C
#endif
/* \} name SECTION: mbed TLS modules */
/**
* \name SECTION: Module configuration options
*
* This section allows for the setting of module specific sizes and
* configuration options. The default values are already present in the
* relevant header files and should suffice for the regular use cases.
*
* Our advice is to enable options and change their values here
* only if you have a good reason and know the consequences.
*
* Please check the respective header file for documentation on these
* parameters (to prevent duplicate documentation).
* \{
*/
/* SSL options */
#ifndef CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN
#define MBEDTLS_SSL_MAX_CONTENT_LEN CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN /**< Maxium fragment length in bytes, determines the size of each of the two internal I/O buffers */
#else
/** \def MBEDTLS_SSL_IN_CONTENT_LEN
*
* Maximum incoming fragment length in bytes.
*
* Uncomment to set the size of the inward TLS buffer independently of the
* outward buffer.
*/
#define MBEDTLS_SSL_IN_CONTENT_LEN CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN
/** \def MBEDTLS_SSL_CID_IN_LEN_MAX
*
* The maximum length of CIDs used for incoming DTLS messages.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_CID_IN_LEN_MAX CONFIG_MBEDTLS_SSL_CID_IN_LEN_MAX
#else
#undef MBEDTLS_SSL_CID_IN_LEN_MAX
#endif
/** \def MBEDTLS_SSL_CID_OUT_LEN_MAX
*
* The maximum length of CIDs used for outgoing DTLS messages.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_CID_OUT_LEN_MAX CONFIG_MBEDTLS_SSL_CID_OUT_LEN_MAX
#else
#undef MBEDTLS_SSL_CID_OUT_LEN_MAX
#endif
/** \def MBEDTLS_SSL_CID_PADDING_GRANULARITY
*
* This option controls the use of record plaintext padding
* when using the Connection ID extension in DTLS 1.2.
*
* The padding will always be chosen so that the length of the
* padded plaintext is a multiple of the value of this option.
*
* Note: A value of \c 1 means that no padding will be used
* for outgoing records.
*
* Note: On systems lacking division instructions,
* a power of two should be preferred.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_CID_PADDING_GRANULARITY CONFIG_MBEDTLS_SSL_CID_PADDING_GRANULARITY
#else
#undef MBEDTLS_SSL_CID_PADDING_GRANULARITY
#endif
/** \def MBEDTLS_SSL_OUT_CONTENT_LEN
*
* Maximum outgoing fragment length in bytes.
*
* Uncomment to set the size of the outward TLS buffer independently of the
* inward buffer.
*
* It is possible to save RAM by setting a smaller outward buffer, while keeping
* the default inward 16384 byte buffer to conform to the TLS specification.
*
* The minimum required outward buffer size is determined by the handshake
* protocol's usage. Handshaking will fail if the outward buffer is too small.
* The specific size requirement depends on the configured ciphers and any
* certificate data which is sent during the handshake.
*
* For absolute minimum RAM usage, it's best to enable
* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH and reduce MBEDTLS_SSL_MAX_CONTENT_LEN. This
* reduces both incoming and outgoing buffer sizes. However this is only
* guaranteed if the other end of the connection also supports the TLS
* max_fragment_len extension. Otherwise the connection may fail.
*/
#define MBEDTLS_SSL_OUT_CONTENT_LEN CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN
#endif /* !CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN */
/**
* Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake
* signature and ciphersuite selection. Without this build-time option, SHA-1
* support must be activated explicitly through mbedtls_ssl_conf_sig_hashes.
* The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by
* default. At the time of writing, there is no practical attack on the use
* of SHA-1 in handshake signatures, hence this option is turned on by default
* for compatibility with existing peers.
*
* \warning SHA-1 is considered a weak message digest and its use constitutes
* a security risk. If possible, we recommend avoiding dependencies
* on it, and considering stronger message digests instead.
*/
#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE
/**
* \def MBEDTLS_THREADING_C
*
* Enable the threading abstraction layer.
* By default mbed TLS assumes it is used in a non-threaded environment or that
* contexts are not shared between threads. If you do intend to use contexts
* between threads, you will need to enable this layer to prevent race
* conditions. See also our Knowledge Base article about threading:
* https://tls.mbed.org/kb/development/thread-safety-and-multi-threading
*
* Module: library/threading.c
*
* This allows different threading implementations (self-implemented or
* provided).
*
* You will have to enable either MBEDTLS_THREADING_ALT or
* MBEDTLS_THREADING_PTHREAD.
*
* Enable this layer to allow use of mutexes within mbed TLS
*/
#ifdef CONFIG_MBEDTLS_THREADING_C
#define MBEDTLS_THREADING_C
#else
#undef MBEDTLS_THREADING_C
#endif
/**
* \def MBEDTLS_THREADING_ALT
*
* Provide your own alternate threading implementation.
*
* Requires: MBEDTLS_THREADING_C
*
* Uncomment this to allow your own alternate threading implementation.
*/
#ifdef CONFIG_MBEDTLS_THREADING_ALT
#define MBEDTLS_THREADING_ALT
#else
#undef MBEDTLS_THREADING_ALT
#endif
/**
* \def MBEDTLS_THREADING_PTHREAD
*
* Enable the pthread wrapper layer for the threading layer.
*
* Requires: MBEDTLS_THREADING_C
*
* Uncomment this to enable pthread mutexes.
*/
#ifdef CONFIG_MBEDTLS_THREADING_PTHREAD
#define MBEDTLS_THREADING_PTHREAD
#else
#undef MBEDTLS_THREADING_PTHREAD
#endif
/**
* \def MBEDTLS_NIST_KW_C
*
* Enable AES key wrapping as per NIST
*
* Requires: MBEDTLS_AES_C
*
* Uncomment this to enable aes key wrap.
*/
#ifdef CONFIG_MBEDTLS_NIST_KW_C
#define MBEDTLS_NIST_KW_C
#else
#undef MBEDTLS_NIST_KW_C
#endif
/* \} name SECTION: Module configuration options */
#if defined(TARGET_LIKE_MBED)
#include "mbedtls/target_config.h"
#endif
/*
* Allow user to override any previous default.
*
* Use two macro names for that, as:
* - with yotta the prefix YOTTA_CFG_ is forced
* - without yotta is looks weird to have a YOTTA prefix.
*/
#if defined(YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE)
#include YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE
#elif defined(MBEDTLS_USER_CONFIG_FILE)
#include MBEDTLS_USER_CONFIG_FILE
#endif
/* This flag makes sure that we are not using
* any functino that is deprecated by mbedtls */
#define MBEDTLS_DEPRECATED_REMOVED
#endif /* ESP_CONFIG_H */