mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
4854bf8640
Add AP-STA mode support in FTM example Update wifi libs with below changes - - Use ex-AP's bandwidth in FTM request when connected - Allow Bandwidth downgrade in FTM negotiation - Use separate calibration when Initiator performs 20MHz FTM while in-AP is in 40MHz |
||
---|---|---|
.. | ||
espnow | ||
fast_scan | ||
ftm | ||
getting_started | ||
iperf | ||
itwt | ||
power_save | ||
roaming | ||
scan | ||
smart_config | ||
softap_sta | ||
wifi_aware | ||
wifi_eap_fast | ||
wifi_easy_connect/dpp-enrollee | ||
wifi_enterprise | ||
wps | ||
wps_softap_registrar | ||
.build-test-rules.yml | ||
README.md |
Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
---|
Wi-Fi Examples
This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.
Example Layout
The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:
espnow
is the connectionless Wi-Fi communication protocol.fast_scan
shows how to use fast scan while connecting to an AP.ftm
is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.getting_started
contains the basic examples for using Wi-Fi in STA and AP mode.iperf
shows the common performance measurements for two ESP running this example.power_save
contains a how to use power save mode of Wi-Fi.roaming
contains 2 examples that demonstrate roaming capabilities.scan
shows how to scan for all the available APs.smart_config
shows how ESP connects to a target AP with ESPTOUCH.wifi_eap_fast
shows how ESP connects to AP with Wi-Fi enterprise encryption using the EAP-FAST method.wifi_easy_connect
shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).wpa2_enterprise
shows how ESP connects to AP with WPA2 enterprise encryption.wps
contains a how to use the Wi-Fi Protected Setup protocol.
More
See the README.md file in the upper level examples directory for more information about examples.