esp-idf/components/esp32/include/xtensa/config/core.h
2016-08-17 23:08:22 +08:00

1406 lines
54 KiB
C

/*
* xtensa/config/core.h -- HAL definitions dependent on CORE configuration
*
* This header file is sometimes referred to as the "compile-time HAL" or CHAL.
* It pulls definitions tailored for a specific Xtensa processor configuration.
*
* Sources for binaries meant to be configuration-independent generally avoid
* including this file (they may use the configuration-specific HAL library).
* It is normal for the HAL library source itself to include this file.
*/
/*
* Copyright (c) 2005-2014 Cadence Design Systems, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef XTENSA_CONFIG_CORE_H
#define XTENSA_CONFIG_CORE_H
/* CONFIGURATION INDEPENDENT DEFINITIONS: */
#ifdef __XTENSA__
#include <xtensa/hal.h>
#include <xtensa/xtensa-versions.h>
#else
#include "../hal.h"
#include "../xtensa-versions.h"
#endif
/* CONFIGURATION SPECIFIC DEFINITIONS: */
#ifdef __XTENSA__
#include <xtensa/config/core-isa.h>
#include <xtensa/config/core-matmap.h>
#include <xtensa/config/tie.h>
#else
#include "core-isa.h"
#include "core-matmap.h"
#include "tie.h"
#endif
#if defined (_ASMLANGUAGE) || defined (__ASSEMBLER__)
#ifdef __XTENSA__
#include <xtensa/config/tie-asm.h>
#else
#include "tie-asm.h"
#endif
#endif /*_ASMLANGUAGE or __ASSEMBLER__*/
/*----------------------------------------------------------------------
GENERAL
----------------------------------------------------------------------*/
/*
* Separators for macros that expand into arrays.
* These can be predefined by files that #include this one,
* when different separators are required.
*/
/* Element separator for macros that expand into 1-dimensional arrays: */
#ifndef XCHAL_SEP
#define XCHAL_SEP ,
#endif
/* Array separator for macros that expand into 2-dimensional arrays: */
#ifndef XCHAL_SEP2
#define XCHAL_SEP2 },{
#endif
/*----------------------------------------------------------------------
ISA
----------------------------------------------------------------------*/
#if XCHAL_HAVE_BE
# define XCHAL_HAVE_LE 0
# define XCHAL_MEMORY_ORDER XTHAL_BIGENDIAN
#else
# define XCHAL_HAVE_LE 1
# define XCHAL_MEMORY_ORDER XTHAL_LITTLEENDIAN
#endif
/*----------------------------------------------------------------------
INTERRUPTS
----------------------------------------------------------------------*/
/* Indexing macros: */
#define _XCHAL_INTLEVEL_MASK(n) XCHAL_INTLEVEL ## n ## _MASK
#define XCHAL_INTLEVEL_MASK(n) _XCHAL_INTLEVEL_MASK(n) /* n = 0 .. 15 */
#define _XCHAL_INTLEVEL_ANDBELOWMASK(n) XCHAL_INTLEVEL ## n ## _ANDBELOW_MASK
#define XCHAL_INTLEVEL_ANDBELOW_MASK(n) _XCHAL_INTLEVEL_ANDBELOWMASK(n) /* n = 0 .. 15 */
#define _XCHAL_INTLEVEL_NUM(n) XCHAL_INTLEVEL ## n ## _NUM
#define XCHAL_INTLEVEL_NUM(n) _XCHAL_INTLEVEL_NUM(n) /* n = 0 .. 15 */
#define _XCHAL_INT_LEVEL(n) XCHAL_INT ## n ## _LEVEL
#define XCHAL_INT_LEVEL(n) _XCHAL_INT_LEVEL(n) /* n = 0 .. 31 */
#define _XCHAL_INT_TYPE(n) XCHAL_INT ## n ## _TYPE
#define XCHAL_INT_TYPE(n) _XCHAL_INT_TYPE(n) /* n = 0 .. 31 */
#define _XCHAL_TIMER_INTERRUPT(n) XCHAL_TIMER ## n ## _INTERRUPT
#define XCHAL_TIMER_INTERRUPT(n) _XCHAL_TIMER_INTERRUPT(n) /* n = 0 .. 3 */
#define XCHAL_HAVE_HIGHLEVEL_INTERRUPTS XCHAL_HAVE_HIGHPRI_INTERRUPTS
#define XCHAL_NUM_LOWPRI_LEVELS 1 /* number of low-priority interrupt levels (always 1) */
#define XCHAL_FIRST_HIGHPRI_LEVEL (XCHAL_NUM_LOWPRI_LEVELS+1) /* level of first high-priority interrupt (always 2) */
/* Note: 1 <= LOWPRI_LEVELS <= EXCM_LEVEL < DEBUGLEVEL <= NUM_INTLEVELS < NMILEVEL <= 15 */
/* These values are constant for existing Xtensa processor implementations: */
#define XCHAL_INTLEVEL0_MASK 0x00000000
#define XCHAL_INTLEVEL8_MASK 0x00000000
#define XCHAL_INTLEVEL9_MASK 0x00000000
#define XCHAL_INTLEVEL10_MASK 0x00000000
#define XCHAL_INTLEVEL11_MASK 0x00000000
#define XCHAL_INTLEVEL12_MASK 0x00000000
#define XCHAL_INTLEVEL13_MASK 0x00000000
#define XCHAL_INTLEVEL14_MASK 0x00000000
#define XCHAL_INTLEVEL15_MASK 0x00000000
/* Array of masks of interrupts at each interrupt level: */
#define XCHAL_INTLEVEL_MASKS XCHAL_INTLEVEL0_MASK \
XCHAL_SEP XCHAL_INTLEVEL1_MASK \
XCHAL_SEP XCHAL_INTLEVEL2_MASK \
XCHAL_SEP XCHAL_INTLEVEL3_MASK \
XCHAL_SEP XCHAL_INTLEVEL4_MASK \
XCHAL_SEP XCHAL_INTLEVEL5_MASK \
XCHAL_SEP XCHAL_INTLEVEL6_MASK \
XCHAL_SEP XCHAL_INTLEVEL7_MASK \
XCHAL_SEP XCHAL_INTLEVEL8_MASK \
XCHAL_SEP XCHAL_INTLEVEL9_MASK \
XCHAL_SEP XCHAL_INTLEVEL10_MASK \
XCHAL_SEP XCHAL_INTLEVEL11_MASK \
XCHAL_SEP XCHAL_INTLEVEL12_MASK \
XCHAL_SEP XCHAL_INTLEVEL13_MASK \
XCHAL_SEP XCHAL_INTLEVEL14_MASK \
XCHAL_SEP XCHAL_INTLEVEL15_MASK
/* These values are constant for existing Xtensa processor implementations: */
#define XCHAL_INTLEVEL0_ANDBELOW_MASK 0x00000000
#define XCHAL_INTLEVEL8_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL9_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL10_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL11_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL12_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL13_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL14_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
#define XCHAL_INTLEVEL15_ANDBELOW_MASK XCHAL_INTLEVEL7_ANDBELOW_MASK
/* Mask of all low-priority interrupts: */
#define XCHAL_LOWPRI_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK
/* Mask of all interrupts masked by PS.EXCM (or CEXCM): */
#define XCHAL_EXCM_MASK XCHAL_INTLEVEL_ANDBELOW_MASK(XCHAL_EXCM_LEVEL)
/* Array of masks of interrupts at each range 1..n of interrupt levels: */
#define XCHAL_INTLEVEL_ANDBELOW_MASKS XCHAL_INTLEVEL0_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL1_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL2_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL3_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL4_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL5_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL6_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL7_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL8_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL9_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL10_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL11_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL12_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL13_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL14_ANDBELOW_MASK \
XCHAL_SEP XCHAL_INTLEVEL15_ANDBELOW_MASK
#if 0 /*XCHAL_HAVE_NMI*/
/* NMI "interrupt level" (for use with EXCSAVE_n, EPS_n, EPC_n, RFI n): */
# define XCHAL_NMILEVEL (XCHAL_NUM_INTLEVELS+1)
#endif
/* Array of levels of each possible interrupt: */
#define XCHAL_INT_LEVELS XCHAL_INT0_LEVEL \
XCHAL_SEP XCHAL_INT1_LEVEL \
XCHAL_SEP XCHAL_INT2_LEVEL \
XCHAL_SEP XCHAL_INT3_LEVEL \
XCHAL_SEP XCHAL_INT4_LEVEL \
XCHAL_SEP XCHAL_INT5_LEVEL \
XCHAL_SEP XCHAL_INT6_LEVEL \
XCHAL_SEP XCHAL_INT7_LEVEL \
XCHAL_SEP XCHAL_INT8_LEVEL \
XCHAL_SEP XCHAL_INT9_LEVEL \
XCHAL_SEP XCHAL_INT10_LEVEL \
XCHAL_SEP XCHAL_INT11_LEVEL \
XCHAL_SEP XCHAL_INT12_LEVEL \
XCHAL_SEP XCHAL_INT13_LEVEL \
XCHAL_SEP XCHAL_INT14_LEVEL \
XCHAL_SEP XCHAL_INT15_LEVEL \
XCHAL_SEP XCHAL_INT16_LEVEL \
XCHAL_SEP XCHAL_INT17_LEVEL \
XCHAL_SEP XCHAL_INT18_LEVEL \
XCHAL_SEP XCHAL_INT19_LEVEL \
XCHAL_SEP XCHAL_INT20_LEVEL \
XCHAL_SEP XCHAL_INT21_LEVEL \
XCHAL_SEP XCHAL_INT22_LEVEL \
XCHAL_SEP XCHAL_INT23_LEVEL \
XCHAL_SEP XCHAL_INT24_LEVEL \
XCHAL_SEP XCHAL_INT25_LEVEL \
XCHAL_SEP XCHAL_INT26_LEVEL \
XCHAL_SEP XCHAL_INT27_LEVEL \
XCHAL_SEP XCHAL_INT28_LEVEL \
XCHAL_SEP XCHAL_INT29_LEVEL \
XCHAL_SEP XCHAL_INT30_LEVEL \
XCHAL_SEP XCHAL_INT31_LEVEL
/* Array of types of each possible interrupt: */
#define XCHAL_INT_TYPES XCHAL_INT0_TYPE \
XCHAL_SEP XCHAL_INT1_TYPE \
XCHAL_SEP XCHAL_INT2_TYPE \
XCHAL_SEP XCHAL_INT3_TYPE \
XCHAL_SEP XCHAL_INT4_TYPE \
XCHAL_SEP XCHAL_INT5_TYPE \
XCHAL_SEP XCHAL_INT6_TYPE \
XCHAL_SEP XCHAL_INT7_TYPE \
XCHAL_SEP XCHAL_INT8_TYPE \
XCHAL_SEP XCHAL_INT9_TYPE \
XCHAL_SEP XCHAL_INT10_TYPE \
XCHAL_SEP XCHAL_INT11_TYPE \
XCHAL_SEP XCHAL_INT12_TYPE \
XCHAL_SEP XCHAL_INT13_TYPE \
XCHAL_SEP XCHAL_INT14_TYPE \
XCHAL_SEP XCHAL_INT15_TYPE \
XCHAL_SEP XCHAL_INT16_TYPE \
XCHAL_SEP XCHAL_INT17_TYPE \
XCHAL_SEP XCHAL_INT18_TYPE \
XCHAL_SEP XCHAL_INT19_TYPE \
XCHAL_SEP XCHAL_INT20_TYPE \
XCHAL_SEP XCHAL_INT21_TYPE \
XCHAL_SEP XCHAL_INT22_TYPE \
XCHAL_SEP XCHAL_INT23_TYPE \
XCHAL_SEP XCHAL_INT24_TYPE \
XCHAL_SEP XCHAL_INT25_TYPE \
XCHAL_SEP XCHAL_INT26_TYPE \
XCHAL_SEP XCHAL_INT27_TYPE \
XCHAL_SEP XCHAL_INT28_TYPE \
XCHAL_SEP XCHAL_INT29_TYPE \
XCHAL_SEP XCHAL_INT30_TYPE \
XCHAL_SEP XCHAL_INT31_TYPE
/* Array of masks of interrupts for each type of interrupt: */
#define XCHAL_INTTYPE_MASKS XCHAL_INTTYPE_MASK_UNCONFIGURED \
XCHAL_SEP XCHAL_INTTYPE_MASK_SOFTWARE \
XCHAL_SEP XCHAL_INTTYPE_MASK_EXTERN_EDGE \
XCHAL_SEP XCHAL_INTTYPE_MASK_EXTERN_LEVEL \
XCHAL_SEP XCHAL_INTTYPE_MASK_TIMER \
XCHAL_SEP XCHAL_INTTYPE_MASK_NMI \
XCHAL_SEP XCHAL_INTTYPE_MASK_WRITE_ERROR
/* Interrupts that can be cleared using the INTCLEAR special register: */
#define XCHAL_INTCLEARABLE_MASK (XCHAL_INTTYPE_MASK_SOFTWARE+XCHAL_INTTYPE_MASK_EXTERN_EDGE+XCHAL_INTTYPE_MASK_WRITE_ERROR)
/* Interrupts that can be triggered using the INTSET special register: */
#define XCHAL_INTSETTABLE_MASK XCHAL_INTTYPE_MASK_SOFTWARE
/* Array of interrupts assigned to each timer (CCOMPARE0 to CCOMPARE3): */
#define XCHAL_TIMER_INTERRUPTS XCHAL_TIMER0_INTERRUPT \
XCHAL_SEP XCHAL_TIMER1_INTERRUPT \
XCHAL_SEP XCHAL_TIMER2_INTERRUPT \
XCHAL_SEP XCHAL_TIMER3_INTERRUPT
/* For backward compatibility and for the array macros, define macros for
* each unconfigured interrupt number (unfortunately, the value of
* XTHAL_INTTYPE_UNCONFIGURED is not zero): */
#if XCHAL_NUM_INTERRUPTS == 0
# define XCHAL_INT0_LEVEL 0
# define XCHAL_INT0_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 1
# define XCHAL_INT1_LEVEL 0
# define XCHAL_INT1_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 2
# define XCHAL_INT2_LEVEL 0
# define XCHAL_INT2_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 3
# define XCHAL_INT3_LEVEL 0
# define XCHAL_INT3_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 4
# define XCHAL_INT4_LEVEL 0
# define XCHAL_INT4_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 5
# define XCHAL_INT5_LEVEL 0
# define XCHAL_INT5_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 6
# define XCHAL_INT6_LEVEL 0
# define XCHAL_INT6_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 7
# define XCHAL_INT7_LEVEL 0
# define XCHAL_INT7_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 8
# define XCHAL_INT8_LEVEL 0
# define XCHAL_INT8_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 9
# define XCHAL_INT9_LEVEL 0
# define XCHAL_INT9_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 10
# define XCHAL_INT10_LEVEL 0
# define XCHAL_INT10_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 11
# define XCHAL_INT11_LEVEL 0
# define XCHAL_INT11_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 12
# define XCHAL_INT12_LEVEL 0
# define XCHAL_INT12_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 13
# define XCHAL_INT13_LEVEL 0
# define XCHAL_INT13_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 14
# define XCHAL_INT14_LEVEL 0
# define XCHAL_INT14_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 15
# define XCHAL_INT15_LEVEL 0
# define XCHAL_INT15_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 16
# define XCHAL_INT16_LEVEL 0
# define XCHAL_INT16_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 17
# define XCHAL_INT17_LEVEL 0
# define XCHAL_INT17_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 18
# define XCHAL_INT18_LEVEL 0
# define XCHAL_INT18_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 19
# define XCHAL_INT19_LEVEL 0
# define XCHAL_INT19_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 20
# define XCHAL_INT20_LEVEL 0
# define XCHAL_INT20_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 21
# define XCHAL_INT21_LEVEL 0
# define XCHAL_INT21_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 22
# define XCHAL_INT22_LEVEL 0
# define XCHAL_INT22_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 23
# define XCHAL_INT23_LEVEL 0
# define XCHAL_INT23_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 24
# define XCHAL_INT24_LEVEL 0
# define XCHAL_INT24_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 25
# define XCHAL_INT25_LEVEL 0
# define XCHAL_INT25_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 26
# define XCHAL_INT26_LEVEL 0
# define XCHAL_INT26_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 27
# define XCHAL_INT27_LEVEL 0
# define XCHAL_INT27_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 28
# define XCHAL_INT28_LEVEL 0
# define XCHAL_INT28_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 29
# define XCHAL_INT29_LEVEL 0
# define XCHAL_INT29_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 30
# define XCHAL_INT30_LEVEL 0
# define XCHAL_INT30_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
#if XCHAL_NUM_INTERRUPTS <= 31
# define XCHAL_INT31_LEVEL 0
# define XCHAL_INT31_TYPE XTHAL_INTTYPE_UNCONFIGURED
#endif
/*
* Masks and levels corresponding to each *external* interrupt.
*/
#define XCHAL_EXTINT0_MASK (1 << XCHAL_EXTINT0_NUM)
#define XCHAL_EXTINT0_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT0_NUM)
#define XCHAL_EXTINT1_MASK (1 << XCHAL_EXTINT1_NUM)
#define XCHAL_EXTINT1_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT1_NUM)
#define XCHAL_EXTINT2_MASK (1 << XCHAL_EXTINT2_NUM)
#define XCHAL_EXTINT2_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT2_NUM)
#define XCHAL_EXTINT3_MASK (1 << XCHAL_EXTINT3_NUM)
#define XCHAL_EXTINT3_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT3_NUM)
#define XCHAL_EXTINT4_MASK (1 << XCHAL_EXTINT4_NUM)
#define XCHAL_EXTINT4_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT4_NUM)
#define XCHAL_EXTINT5_MASK (1 << XCHAL_EXTINT5_NUM)
#define XCHAL_EXTINT5_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT5_NUM)
#define XCHAL_EXTINT6_MASK (1 << XCHAL_EXTINT6_NUM)
#define XCHAL_EXTINT6_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT6_NUM)
#define XCHAL_EXTINT7_MASK (1 << XCHAL_EXTINT7_NUM)
#define XCHAL_EXTINT7_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT7_NUM)
#define XCHAL_EXTINT8_MASK (1 << XCHAL_EXTINT8_NUM)
#define XCHAL_EXTINT8_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT8_NUM)
#define XCHAL_EXTINT9_MASK (1 << XCHAL_EXTINT9_NUM)
#define XCHAL_EXTINT9_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT9_NUM)
#define XCHAL_EXTINT10_MASK (1 << XCHAL_EXTINT10_NUM)
#define XCHAL_EXTINT10_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT10_NUM)
#define XCHAL_EXTINT11_MASK (1 << XCHAL_EXTINT11_NUM)
#define XCHAL_EXTINT11_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT11_NUM)
#define XCHAL_EXTINT12_MASK (1 << XCHAL_EXTINT12_NUM)
#define XCHAL_EXTINT12_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT12_NUM)
#define XCHAL_EXTINT13_MASK (1 << XCHAL_EXTINT13_NUM)
#define XCHAL_EXTINT13_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT13_NUM)
#define XCHAL_EXTINT14_MASK (1 << XCHAL_EXTINT14_NUM)
#define XCHAL_EXTINT14_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT14_NUM)
#define XCHAL_EXTINT15_MASK (1 << XCHAL_EXTINT15_NUM)
#define XCHAL_EXTINT15_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT15_NUM)
#define XCHAL_EXTINT16_MASK (1 << XCHAL_EXTINT16_NUM)
#define XCHAL_EXTINT16_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT16_NUM)
#define XCHAL_EXTINT17_MASK (1 << XCHAL_EXTINT17_NUM)
#define XCHAL_EXTINT17_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT17_NUM)
#define XCHAL_EXTINT18_MASK (1 << XCHAL_EXTINT18_NUM)
#define XCHAL_EXTINT18_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT18_NUM)
#define XCHAL_EXTINT19_MASK (1 << XCHAL_EXTINT19_NUM)
#define XCHAL_EXTINT19_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT19_NUM)
#define XCHAL_EXTINT20_MASK (1 << XCHAL_EXTINT20_NUM)
#define XCHAL_EXTINT20_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT20_NUM)
#define XCHAL_EXTINT21_MASK (1 << XCHAL_EXTINT21_NUM)
#define XCHAL_EXTINT21_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT21_NUM)
#define XCHAL_EXTINT22_MASK (1 << XCHAL_EXTINT22_NUM)
#define XCHAL_EXTINT22_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT22_NUM)
#define XCHAL_EXTINT23_MASK (1 << XCHAL_EXTINT23_NUM)
#define XCHAL_EXTINT23_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT23_NUM)
#define XCHAL_EXTINT24_MASK (1 << XCHAL_EXTINT24_NUM)
#define XCHAL_EXTINT24_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT24_NUM)
#define XCHAL_EXTINT25_MASK (1 << XCHAL_EXTINT25_NUM)
#define XCHAL_EXTINT25_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT25_NUM)
#define XCHAL_EXTINT26_MASK (1 << XCHAL_EXTINT26_NUM)
#define XCHAL_EXTINT26_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT26_NUM)
#define XCHAL_EXTINT27_MASK (1 << XCHAL_EXTINT27_NUM)
#define XCHAL_EXTINT27_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT27_NUM)
#define XCHAL_EXTINT28_MASK (1 << XCHAL_EXTINT28_NUM)
#define XCHAL_EXTINT28_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT28_NUM)
#define XCHAL_EXTINT29_MASK (1 << XCHAL_EXTINT29_NUM)
#define XCHAL_EXTINT29_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT29_NUM)
#define XCHAL_EXTINT30_MASK (1 << XCHAL_EXTINT30_NUM)
#define XCHAL_EXTINT30_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT30_NUM)
#define XCHAL_EXTINT31_MASK (1 << XCHAL_EXTINT31_NUM)
#define XCHAL_EXTINT31_LEVEL XCHAL_INT_LEVEL(XCHAL_EXTINT31_NUM)
/*----------------------------------------------------------------------
EXCEPTIONS and VECTORS
----------------------------------------------------------------------*/
/* For backward compatibility ONLY -- DO NOT USE (will be removed in future release): */
#define XCHAL_HAVE_OLD_EXC_ARCH XCHAL_HAVE_XEA1 /* (DEPRECATED) 1 if old exception architecture (XEA1), 0 otherwise (eg. XEA2) */
#define XCHAL_HAVE_EXCM XCHAL_HAVE_XEA2 /* (DEPRECATED) 1 if PS.EXCM bit exists (currently equals XCHAL_HAVE_TLBS) */
#ifdef XCHAL_USER_VECTOR_VADDR
#define XCHAL_PROGRAMEXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR
#define XCHAL_USEREXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR
#endif
#ifdef XCHAL_USER_VECTOR_PADDR
# define XCHAL_PROGRAMEXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR
# define XCHAL_USEREXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR
#endif
#ifdef XCHAL_KERNEL_VECTOR_VADDR
# define XCHAL_STACKEDEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR
# define XCHAL_KERNELEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR
#endif
#ifdef XCHAL_KERNEL_VECTOR_PADDR
# define XCHAL_STACKEDEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR
# define XCHAL_KERNELEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR
#endif
#if 0
#if XCHAL_HAVE_DEBUG
# define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL_VECTOR_VADDR(XCHAL_DEBUGLEVEL)
/* This one should only get defined if the corresponding intlevel paddr macro exists: */
# define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL_VECTOR_PADDR(XCHAL_DEBUGLEVEL)
#endif
#endif
/* Indexing macros: */
#define _XCHAL_INTLEVEL_VECTOR_VADDR(n) XCHAL_INTLEVEL ## n ## _VECTOR_VADDR
#define XCHAL_INTLEVEL_VECTOR_VADDR(n) _XCHAL_INTLEVEL_VECTOR_VADDR(n) /* n = 0 .. 15 */
/*
* General Exception Causes
* (values of EXCCAUSE special register set by general exceptions,
* which vector to the user, kernel, or double-exception vectors).
*
* DEPRECATED. Please use the equivalent EXCCAUSE_xxx macros
* defined in <xtensa/corebits.h>. (Note that these have slightly
* different names, they don't just have the XCHAL_ prefix removed.)
*/
#define XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION 0 /* Illegal Instruction */
#define XCHAL_EXCCAUSE_SYSTEM_CALL 1 /* System Call */
#define XCHAL_EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 /* Instruction Fetch Error */
#define XCHAL_EXCCAUSE_LOAD_STORE_ERROR 3 /* Load Store Error */
#define XCHAL_EXCCAUSE_LEVEL1_INTERRUPT 4 /* Level 1 Interrupt */
#define XCHAL_EXCCAUSE_ALLOCA 5 /* Stack Extension Assist */
#define XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 /* Integer Divide by Zero */
#define XCHAL_EXCCAUSE_SPECULATION 7 /* Speculation */
#define XCHAL_EXCCAUSE_PRIVILEGED 8 /* Privileged Instruction */
#define XCHAL_EXCCAUSE_UNALIGNED 9 /* Unaligned Load Store */
/*10..15 reserved*/
#define XCHAL_EXCCAUSE_ITLB_MISS 16 /* ITlb Miss Exception */
#define XCHAL_EXCCAUSE_ITLB_MULTIHIT 17 /* ITlb Mutltihit Exception */
#define XCHAL_EXCCAUSE_ITLB_PRIVILEGE 18 /* ITlb Privilege Exception */
#define XCHAL_EXCCAUSE_ITLB_SIZE_RESTRICTION 19 /* ITlb Size Restriction Exception */
#define XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 /* Fetch Cache Attribute Exception */
/*21..23 reserved*/
#define XCHAL_EXCCAUSE_DTLB_MISS 24 /* DTlb Miss Exception */
#define XCHAL_EXCCAUSE_DTLB_MULTIHIT 25 /* DTlb Multihit Exception */
#define XCHAL_EXCCAUSE_DTLB_PRIVILEGE 26 /* DTlb Privilege Exception */
#define XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION 27 /* DTlb Size Restriction Exception */
#define XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 /* Load Cache Attribute Exception */
#define XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 /* Store Cache Attribute Exception */
/*30..31 reserved*/
#define XCHAL_EXCCAUSE_COPROCESSOR0_DISABLED 32 /* Coprocessor 0 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR1_DISABLED 33 /* Coprocessor 1 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR2_DISABLED 34 /* Coprocessor 2 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR3_DISABLED 35 /* Coprocessor 3 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR4_DISABLED 36 /* Coprocessor 4 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR5_DISABLED 37 /* Coprocessor 5 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR6_DISABLED 38 /* Coprocessor 6 disabled */
#define XCHAL_EXCCAUSE_COPROCESSOR7_DISABLED 39 /* Coprocessor 7 disabled */
/*40..63 reserved*/
/*
* Miscellaneous special register fields.
*
* For each special register, and each field within each register:
* XCHAL_<regname>_VALIDMASK is the set of bits defined in the register.
* XCHAL_<regname>_<field>_BITS is the number of bits in the field.
* XCHAL_<regname>_<field>_NUM is 2^bits, the number of possible values
* of the field.
* XCHAL_<regname>_<field>_SHIFT is the position of the field within
* the register, starting from the least significant bit.
*
* DEPRECATED. Please use the equivalent macros defined in
* <xtensa/corebits.h>. (Note that these have different names.)
*/
/* DBREAKC (special register number 160): */
#define XCHAL_DBREAKC_VALIDMASK 0xC000003F
#define XCHAL_DBREAKC_MASK_BITS 6
#define XCHAL_DBREAKC_MASK_NUM 64
#define XCHAL_DBREAKC_MASK_SHIFT 0
#define XCHAL_DBREAKC_MASK_MASK 0x0000003F
#define XCHAL_DBREAKC_LOADBREAK_BITS 1
#define XCHAL_DBREAKC_LOADBREAK_NUM 2
#define XCHAL_DBREAKC_LOADBREAK_SHIFT 30
#define XCHAL_DBREAKC_LOADBREAK_MASK 0x40000000
#define XCHAL_DBREAKC_STOREBREAK_BITS 1
#define XCHAL_DBREAKC_STOREBREAK_NUM 2
#define XCHAL_DBREAKC_STOREBREAK_SHIFT 31
#define XCHAL_DBREAKC_STOREBREAK_MASK 0x80000000
/* PS (special register number 230): */
#define XCHAL_PS_VALIDMASK 0x00070F3F
#define XCHAL_PS_INTLEVEL_BITS 4
#define XCHAL_PS_INTLEVEL_NUM 16
#define XCHAL_PS_INTLEVEL_SHIFT 0
#define XCHAL_PS_INTLEVEL_MASK 0x0000000F
#define XCHAL_PS_EXCM_BITS 1
#define XCHAL_PS_EXCM_NUM 2
#define XCHAL_PS_EXCM_SHIFT 4
#define XCHAL_PS_EXCM_MASK 0x00000010
#define XCHAL_PS_UM_BITS 1
#define XCHAL_PS_UM_NUM 2
#define XCHAL_PS_UM_SHIFT 5
#define XCHAL_PS_UM_MASK 0x00000020
#define XCHAL_PS_RING_BITS 2
#define XCHAL_PS_RING_NUM 4
#define XCHAL_PS_RING_SHIFT 6
#define XCHAL_PS_RING_MASK 0x000000C0
#define XCHAL_PS_OWB_BITS 4
#define XCHAL_PS_OWB_NUM 16
#define XCHAL_PS_OWB_SHIFT 8
#define XCHAL_PS_OWB_MASK 0x00000F00
#define XCHAL_PS_CALLINC_BITS 2
#define XCHAL_PS_CALLINC_NUM 4
#define XCHAL_PS_CALLINC_SHIFT 16
#define XCHAL_PS_CALLINC_MASK 0x00030000
#define XCHAL_PS_WOE_BITS 1
#define XCHAL_PS_WOE_NUM 2
#define XCHAL_PS_WOE_SHIFT 18
#define XCHAL_PS_WOE_MASK 0x00040000
/* EXCCAUSE (special register number 232): */
#define XCHAL_EXCCAUSE_VALIDMASK 0x0000003F
#define XCHAL_EXCCAUSE_BITS 6
#define XCHAL_EXCCAUSE_NUM 64
#define XCHAL_EXCCAUSE_SHIFT 0
#define XCHAL_EXCCAUSE_MASK 0x0000003F
/* DEBUGCAUSE (special register number 233): */
#define XCHAL_DEBUGCAUSE_VALIDMASK 0x0000003F
#define XCHAL_DEBUGCAUSE_ICOUNT_BITS 1
#define XCHAL_DEBUGCAUSE_ICOUNT_NUM 2
#define XCHAL_DEBUGCAUSE_ICOUNT_SHIFT 0
#define XCHAL_DEBUGCAUSE_ICOUNT_MASK 0x00000001
#define XCHAL_DEBUGCAUSE_IBREAK_BITS 1
#define XCHAL_DEBUGCAUSE_IBREAK_NUM 2
#define XCHAL_DEBUGCAUSE_IBREAK_SHIFT 1
#define XCHAL_DEBUGCAUSE_IBREAK_MASK 0x00000002
#define XCHAL_DEBUGCAUSE_DBREAK_BITS 1
#define XCHAL_DEBUGCAUSE_DBREAK_NUM 2
#define XCHAL_DEBUGCAUSE_DBREAK_SHIFT 2
#define XCHAL_DEBUGCAUSE_DBREAK_MASK 0x00000004
#define XCHAL_DEBUGCAUSE_BREAK_BITS 1
#define XCHAL_DEBUGCAUSE_BREAK_NUM 2
#define XCHAL_DEBUGCAUSE_BREAK_SHIFT 3
#define XCHAL_DEBUGCAUSE_BREAK_MASK 0x00000008
#define XCHAL_DEBUGCAUSE_BREAKN_BITS 1
#define XCHAL_DEBUGCAUSE_BREAKN_NUM 2
#define XCHAL_DEBUGCAUSE_BREAKN_SHIFT 4
#define XCHAL_DEBUGCAUSE_BREAKN_MASK 0x00000010
#define XCHAL_DEBUGCAUSE_DEBUGINT_BITS 1
#define XCHAL_DEBUGCAUSE_DEBUGINT_NUM 2
#define XCHAL_DEBUGCAUSE_DEBUGINT_SHIFT 5
#define XCHAL_DEBUGCAUSE_DEBUGINT_MASK 0x00000020
/*----------------------------------------------------------------------
TIMERS
----------------------------------------------------------------------*/
/*#define XCHAL_HAVE_TIMERS XCHAL_HAVE_CCOUNT*/
/*----------------------------------------------------------------------
INTERNAL I/D RAM/ROMs and XLMI
----------------------------------------------------------------------*/
#define XCHAL_NUM_IROM XCHAL_NUM_INSTROM /* (DEPRECATED) */
#define XCHAL_NUM_IRAM XCHAL_NUM_INSTRAM /* (DEPRECATED) */
#define XCHAL_NUM_DROM XCHAL_NUM_DATAROM /* (DEPRECATED) */
#define XCHAL_NUM_DRAM XCHAL_NUM_DATARAM /* (DEPRECATED) */
#define XCHAL_IROM0_VADDR XCHAL_INSTROM0_VADDR /* (DEPRECATED) */
#define XCHAL_IROM0_PADDR XCHAL_INSTROM0_PADDR /* (DEPRECATED) */
#define XCHAL_IROM0_SIZE XCHAL_INSTROM0_SIZE /* (DEPRECATED) */
#define XCHAL_IROM1_VADDR XCHAL_INSTROM1_VADDR /* (DEPRECATED) */
#define XCHAL_IROM1_PADDR XCHAL_INSTROM1_PADDR /* (DEPRECATED) */
#define XCHAL_IROM1_SIZE XCHAL_INSTROM1_SIZE /* (DEPRECATED) */
#define XCHAL_IRAM0_VADDR XCHAL_INSTRAM0_VADDR /* (DEPRECATED) */
#define XCHAL_IRAM0_PADDR XCHAL_INSTRAM0_PADDR /* (DEPRECATED) */
#define XCHAL_IRAM0_SIZE XCHAL_INSTRAM0_SIZE /* (DEPRECATED) */
#define XCHAL_IRAM1_VADDR XCHAL_INSTRAM1_VADDR /* (DEPRECATED) */
#define XCHAL_IRAM1_PADDR XCHAL_INSTRAM1_PADDR /* (DEPRECATED) */
#define XCHAL_IRAM1_SIZE XCHAL_INSTRAM1_SIZE /* (DEPRECATED) */
#define XCHAL_DROM0_VADDR XCHAL_DATAROM0_VADDR /* (DEPRECATED) */
#define XCHAL_DROM0_PADDR XCHAL_DATAROM0_PADDR /* (DEPRECATED) */
#define XCHAL_DROM0_SIZE XCHAL_DATAROM0_SIZE /* (DEPRECATED) */
#define XCHAL_DROM1_VADDR XCHAL_DATAROM1_VADDR /* (DEPRECATED) */
#define XCHAL_DROM1_PADDR XCHAL_DATAROM1_PADDR /* (DEPRECATED) */
#define XCHAL_DROM1_SIZE XCHAL_DATAROM1_SIZE /* (DEPRECATED) */
#define XCHAL_DRAM0_VADDR XCHAL_DATARAM0_VADDR /* (DEPRECATED) */
#define XCHAL_DRAM0_PADDR XCHAL_DATARAM0_PADDR /* (DEPRECATED) */
#define XCHAL_DRAM0_SIZE XCHAL_DATARAM0_SIZE /* (DEPRECATED) */
#define XCHAL_DRAM1_VADDR XCHAL_DATARAM1_VADDR /* (DEPRECATED) */
#define XCHAL_DRAM1_PADDR XCHAL_DATARAM1_PADDR /* (DEPRECATED) */
#define XCHAL_DRAM1_SIZE XCHAL_DATARAM1_SIZE /* (DEPRECATED) */
/*----------------------------------------------------------------------
CACHE
----------------------------------------------------------------------*/
/* Default PREFCTL value to enable prefetch. */
#if XCHAL_HW_MIN_VERSION < XTENSA_HWVERSION_RE_2012_0
#define XCHAL_CACHE_PREFCTL_DEFAULT 0x00044 /* enabled, not aggressive */
#elif XCHAL_HW_MIN_VERSION < XTENSA_HWVERSION_RF_2014_0
#define XCHAL_CACHE_PREFCTL_DEFAULT 0x01044 /* + enable prefetch to L1 */
#elif XCHAL_PREFETCH_ENTRIES >= 16
#define XCHAL_CACHE_PREFCTL_DEFAULT 0x81044 /* 12 entries for block ops */
#elif XCHAL_PREFETCH_ENTRIES >= 8
#define XCHAL_CACHE_PREFCTL_DEFAULT 0x51044 /* 5 entries for block ops */
#else
#define XCHAL_CACHE_PREFCTL_DEFAULT 0x01044 /* 0 entries for block ops */
#endif
/* Max for both I-cache and D-cache (used for general alignment): */
#if XCHAL_ICACHE_LINESIZE > XCHAL_DCACHE_LINESIZE
# define XCHAL_CACHE_LINEWIDTH_MAX XCHAL_ICACHE_LINEWIDTH
# define XCHAL_CACHE_LINESIZE_MAX XCHAL_ICACHE_LINESIZE
#else
# define XCHAL_CACHE_LINEWIDTH_MAX XCHAL_DCACHE_LINEWIDTH
# define XCHAL_CACHE_LINESIZE_MAX XCHAL_DCACHE_LINESIZE
#endif
#define XCHAL_ICACHE_SETSIZE (1<<XCHAL_ICACHE_SETWIDTH)
#define XCHAL_DCACHE_SETSIZE (1<<XCHAL_DCACHE_SETWIDTH)
/* Max for both I and D caches (used for cache-coherency page alignment): */
#if XCHAL_ICACHE_SETWIDTH > XCHAL_DCACHE_SETWIDTH
# define XCHAL_CACHE_SETWIDTH_MAX XCHAL_ICACHE_SETWIDTH
# define XCHAL_CACHE_SETSIZE_MAX XCHAL_ICACHE_SETSIZE
#else
# define XCHAL_CACHE_SETWIDTH_MAX XCHAL_DCACHE_SETWIDTH
# define XCHAL_CACHE_SETSIZE_MAX XCHAL_DCACHE_SETSIZE
#endif
/* Instruction cache tag bits: */
#define XCHAL_ICACHE_TAG_V_SHIFT 0
#define XCHAL_ICACHE_TAG_V 0x1 /* valid bit */
#if XCHAL_ICACHE_WAYS > 1
# define XCHAL_ICACHE_TAG_F_SHIFT 1
# define XCHAL_ICACHE_TAG_F 0x2 /* fill (LRU) bit */
#else
# define XCHAL_ICACHE_TAG_F_SHIFT 0
# define XCHAL_ICACHE_TAG_F 0 /* no fill (LRU) bit */
#endif
#if XCHAL_ICACHE_LINE_LOCKABLE
# define XCHAL_ICACHE_TAG_L_SHIFT (XCHAL_ICACHE_TAG_F_SHIFT+1)
# define XCHAL_ICACHE_TAG_L (1 << XCHAL_ICACHE_TAG_L_SHIFT) /* lock bit */
#else
# define XCHAL_ICACHE_TAG_L_SHIFT XCHAL_ICACHE_TAG_F_SHIFT
# define XCHAL_ICACHE_TAG_L 0 /* no lock bit */
#endif
/* Data cache tag bits: */
#define XCHAL_DCACHE_TAG_V_SHIFT 0
#define XCHAL_DCACHE_TAG_V 0x1 /* valid bit */
#if XCHAL_DCACHE_WAYS > 1
# define XCHAL_DCACHE_TAG_F_SHIFT 1
# define XCHAL_DCACHE_TAG_F 0x2 /* fill (LRU) bit */
#else
# define XCHAL_DCACHE_TAG_F_SHIFT 0
# define XCHAL_DCACHE_TAG_F 0 /* no fill (LRU) bit */
#endif
#if XCHAL_DCACHE_IS_WRITEBACK
# define XCHAL_DCACHE_TAG_D_SHIFT (XCHAL_DCACHE_TAG_F_SHIFT+1)
# define XCHAL_DCACHE_TAG_D (1 << XCHAL_DCACHE_TAG_D_SHIFT) /* dirty bit */
#else
# define XCHAL_DCACHE_TAG_D_SHIFT XCHAL_DCACHE_TAG_F_SHIFT
# define XCHAL_DCACHE_TAG_D 0 /* no dirty bit */
#endif
#if XCHAL_DCACHE_LINE_LOCKABLE
# define XCHAL_DCACHE_TAG_L_SHIFT (XCHAL_DCACHE_TAG_D_SHIFT+1)
# define XCHAL_DCACHE_TAG_L (1 << XCHAL_DCACHE_TAG_L_SHIFT) /* lock bit */
#else
# define XCHAL_DCACHE_TAG_L_SHIFT XCHAL_DCACHE_TAG_D_SHIFT
# define XCHAL_DCACHE_TAG_L 0 /* no lock bit */
#endif
/* Whether MEMCTL register has anything useful */
#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \
XCHAL_DCACHE_IS_COHERENT || \
XCHAL_HAVE_ICACHE_DYN_WAYS || \
XCHAL_HAVE_DCACHE_DYN_WAYS) && \
(XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0))
/* Default MEMCTL values: */
#if XCHAL_HAVE_ICACHE_DYN_WAYS || XCHAL_HAVE_DCACHE_DYN_WAYS
/* NOTE: constant defined this way to allow movi instead of l32r in reset code. */
#define XCHAL_CACHE_MEMCTL_DEFAULT 0xFFFFFF00 /* Init all possible ways */
#else
#define XCHAL_CACHE_MEMCTL_DEFAULT 0x00000000 /* Nothing to do */
#endif
#if XCHAL_DCACHE_IS_COHERENT
#define _MEMCTL_SNOOP_EN 0x02 /* Enable snoop */
#else
#define _MEMCTL_SNOOP_EN 0x00 /* Don't enable snoop */
#endif
#if (XCHAL_LOOP_BUFFER_SIZE == 0) || XCHAL_ERRATUM_453
#define _MEMCTL_L0IBUF_EN 0x00 /* No loop buffer or don't enable */
#else
#define _MEMCTL_L0IBUF_EN 0x01 /* Enable loop buffer */
#endif
#define XCHAL_SNOOP_LB_MEMCTL_DEFAULT (_MEMCTL_SNOOP_EN | _MEMCTL_L0IBUF_EN)
/*----------------------------------------------------------------------
MMU
----------------------------------------------------------------------*/
/* See <xtensa/config/core-matmap.h> for more details. */
/* Has different semantic in open source headers (where it means HAVE_PTP_MMU),
so comment out starting with RB-2008.3 release; later, might get
get reintroduced as a synonym for XCHAL_HAVE_PTP_MMU instead: */
/*#define XCHAL_HAVE_MMU XCHAL_HAVE_TLBS*/ /* (DEPRECATED; use XCHAL_HAVE_TLBS instead) */
/* Indexing macros: */
#define _XCHAL_ITLB_SET(n,_what) XCHAL_ITLB_SET ## n ## _what
#define XCHAL_ITLB_SET(n,what) _XCHAL_ITLB_SET(n, _ ## what )
#define _XCHAL_ITLB_SET_E(n,i,_what) XCHAL_ITLB_SET ## n ## _E ## i ## _what
#define XCHAL_ITLB_SET_E(n,i,what) _XCHAL_ITLB_SET_E(n,i, _ ## what )
#define _XCHAL_DTLB_SET(n,_what) XCHAL_DTLB_SET ## n ## _what
#define XCHAL_DTLB_SET(n,what) _XCHAL_DTLB_SET(n, _ ## what )
#define _XCHAL_DTLB_SET_E(n,i,_what) XCHAL_DTLB_SET ## n ## _E ## i ## _what
#define XCHAL_DTLB_SET_E(n,i,what) _XCHAL_DTLB_SET_E(n,i, _ ## what )
/*
* Example use: XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES)
* to get the value of XCHAL_ITLB_SET<n>_ENTRIES where <n> is the first auto-refill set.
*/
/* Number of entries per autorefill way: */
#define XCHAL_ITLB_ARF_ENTRIES (1<<XCHAL_ITLB_ARF_ENTRIES_LOG2)
#define XCHAL_DTLB_ARF_ENTRIES (1<<XCHAL_DTLB_ARF_ENTRIES_LOG2)
/*
* Determine whether we have a full MMU (with Page Table and Protection)
* usable for an MMU-based OS:
*/
#if 0
#if XCHAL_HAVE_TLBS && !XCHAL_HAVE_SPANNING_WAY && XCHAL_ITLB_ARF_WAYS > 0 && XCHAL_DTLB_ARF_WAYS > 0 && XCHAL_MMU_RINGS >= 2
# define XCHAL_HAVE_PTP_MMU 1 /* have full MMU (with page table [autorefill] and protection) */
#else
# define XCHAL_HAVE_PTP_MMU 0 /* don't have full MMU */
#endif
#endif
/*
* For full MMUs, report kernel RAM segment and kernel I/O segment static page mappings:
*/
#if XCHAL_HAVE_PTP_MMU && !XCHAL_HAVE_SPANNING_WAY
#define XCHAL_KSEG_CACHED_VADDR 0xD0000000 /* virt.addr of kernel RAM cached static map */
#define XCHAL_KSEG_CACHED_PADDR 0x00000000 /* phys.addr of kseg_cached */
#define XCHAL_KSEG_CACHED_SIZE 0x08000000 /* size in bytes of kseg_cached (assumed power of 2!!!) */
#define XCHAL_KSEG_BYPASS_VADDR 0xD8000000 /* virt.addr of kernel RAM bypass (uncached) static map */
#define XCHAL_KSEG_BYPASS_PADDR 0x00000000 /* phys.addr of kseg_bypass */
#define XCHAL_KSEG_BYPASS_SIZE 0x08000000 /* size in bytes of kseg_bypass (assumed power of 2!!!) */
#define XCHAL_KIO_CACHED_VADDR 0xE0000000 /* virt.addr of kernel I/O cached static map */
#define XCHAL_KIO_CACHED_PADDR 0xF0000000 /* phys.addr of kio_cached */
#define XCHAL_KIO_CACHED_SIZE 0x10000000 /* size in bytes of kio_cached (assumed power of 2!!!) */
#define XCHAL_KIO_BYPASS_VADDR 0xF0000000 /* virt.addr of kernel I/O bypass (uncached) static map */
#define XCHAL_KIO_BYPASS_PADDR 0xF0000000 /* phys.addr of kio_bypass */
#define XCHAL_KIO_BYPASS_SIZE 0x10000000 /* size in bytes of kio_bypass (assumed power of 2!!!) */
#define XCHAL_SEG_MAPPABLE_VADDR 0x00000000 /* start of largest non-static-mapped virtual addr area */
#define XCHAL_SEG_MAPPABLE_SIZE 0xD0000000 /* size in bytes of " */
/* define XCHAL_SEG_MAPPABLE2_xxx if more areas present, sorted in order of descending size. */
#endif
/*----------------------------------------------------------------------
MISC
----------------------------------------------------------------------*/
/* Data alignment required if used for instructions: */
#if XCHAL_INST_FETCH_WIDTH > XCHAL_DATA_WIDTH
# define XCHAL_ALIGN_MAX XCHAL_INST_FETCH_WIDTH
#else
# define XCHAL_ALIGN_MAX XCHAL_DATA_WIDTH
#endif
/*
* Names kept for backward compatibility.
* (Here "RELEASE" is now a misnomer; these are product *versions*, not the releases
* under which they are released. In the T10##.# era there was no distinction.)
*/
#define XCHAL_HW_RELEASE_MAJOR XCHAL_HW_VERSION_MAJOR
#define XCHAL_HW_RELEASE_MINOR XCHAL_HW_VERSION_MINOR
#define XCHAL_HW_RELEASE_NAME XCHAL_HW_VERSION_NAME
/*----------------------------------------------------------------------
COPROCESSORS and EXTRA STATE
----------------------------------------------------------------------*/
#define XCHAL_EXTRA_SA_SIZE XCHAL_NCP_SA_SIZE
#define XCHAL_EXTRA_SA_ALIGN XCHAL_NCP_SA_ALIGN
#define XCHAL_CPEXTRA_SA_SIZE XCHAL_TOTAL_SA_SIZE
#define XCHAL_CPEXTRA_SA_ALIGN XCHAL_TOTAL_SA_ALIGN
#if defined (_ASMLANGUAGE) || defined (__ASSEMBLER__)
/* Invoked at start of save area load/store sequence macro to setup macro
* internal offsets. Not usually invoked directly.
* continue 0 for 1st sequence, 1 for subsequent consecutive ones.
* totofs offset from original ptr to next load/store location.
*/
.macro xchal_sa_start continue totofs
.ifeq \continue
.set .Lxchal_pofs_, 0 /* offset from original ptr to current \ptr */
.set .Lxchal_ofs_, 0 /* offset from current \ptr to next load/store location */
.endif
.if \totofs + 1 /* if totofs specified (not -1) */
.set .Lxchal_ofs_, \totofs - .Lxchal_pofs_ /* specific offset from original ptr */
.endif
.endm
/* Align portion of save area and bring ptr in range if necessary.
* Used by save area load/store sequences. Not usually invoked directly.
* Allows combining multiple (sub-)sequences arbitrarily.
* ptr pointer to save area (may be off, see .Lxchal_pofs_)
* minofs,maxofs range of offset from cur ptr to next load/store loc;
* minofs <= 0 <= maxofs (0 must always be valid offset)
* range must be within +/- 30kB or so.
* ofsalign alignment granularity of minofs .. maxofs (pow of 2)
* (restriction on offset from ptr to next load/store loc)
* totalign align from orig ptr to next load/store loc (pow of 2)
*/
.macro xchal_sa_align ptr minofs maxofs ofsalign totalign
/* First align where we start accessing the next register
* per \totalign relative to original ptr (i.e. start of the save area):
*/
.set .Lxchal_ofs_, ((.Lxchal_pofs_ + .Lxchal_ofs_ + \totalign - 1) & -\totalign) - .Lxchal_pofs_
/* If necessary, adjust \ptr to bring .Lxchal_ofs_ in acceptable range: */
.if (((\maxofs) - .Lxchal_ofs_) & 0xC0000000) | ((.Lxchal_ofs_ - (\minofs)) & 0xC0000000) | (.Lxchal_ofs_ & (\ofsalign-1))
.set .Ligmask, 0xFFFFFFFF /* TODO: optimize to addmi, per aligns and .Lxchal_ofs_ */
addi \ptr, \ptr, (.Lxchal_ofs_ & .Ligmask)
.set .Lxchal_pofs_, .Lxchal_pofs_ + (.Lxchal_ofs_ & .Ligmask)
.set .Lxchal_ofs_, (.Lxchal_ofs_ & ~.Ligmask)
.endif
.endm
/*
* We could optimize for addi to expand to only addmi instead of
* "addmi;addi", where possible. Here's a partial example how:
* .set .Lmaxmask, -(\ofsalign) & -(\totalign)
* .if (((\maxofs) + ~.Lmaxmask + 1) & 0xFFFFFF00) && ((.Lxchal_ofs_ & ~.Lmaxmask) == 0)
* .set .Ligmask, 0xFFFFFF00
* .elif ... ditto for negative ofs range ...
* .set .Ligmask, 0xFFFFFF00
* .set ... adjust per offset ...
* .else
* .set .Ligmask, 0xFFFFFFFF
* .endif
*/
/* Invoke this after xchal_XXX_{load,store} macros to restore \ptr. */
.macro xchal_sa_ptr_restore ptr
.if .Lxchal_pofs_
addi \ptr, \ptr, - .Lxchal_pofs_
.set .Lxchal_ofs_, .Lxchal_ofs_ + .Lxchal_pofs_
.set .Lxchal_pofs_, 0
.endif
.endm
/*
* Use as eg:
* xchal_atmps_store a1, SOMEOFS, XCHAL_SA_NUM_ATMPS, a4, a5
* xchal_ncp_load a2, a0,a3,a4,a5
* xchal_atmps_load a1, SOMEOFS, XCHAL_SA_NUM_ATMPS, a4, a5
*
* Specify only the ARs you *haven't* saved/restored already, up to 4.
* They *must* be the *last* ARs (in same order) specified to save area
* load/store sequences. In the example above, a0 and a3 were already
* saved/restored and unused (thus available) but a4 and a5 were not.
*/
#define xchal_atmps_store xchal_atmps_loadstore s32i,
#define xchal_atmps_load xchal_atmps_loadstore l32i,
.macro xchal_atmps_loadstore inst ptr offset nreq aa=0 ab=0 ac=0 ad=0
.set .Lnsaved_, 0
.irp reg,\aa,\ab,\ac,\ad
.ifeq 0x\reg ; .set .Lnsaved_,.Lnsaved_+1 ; .endif
.endr
.set .Laofs_, 0
.irp reg,\aa,\ab,\ac,\ad
.ifgt (\nreq)-.Lnsaved_
\inst \reg, \ptr, .Laofs_+\offset
.set .Laofs_,.Laofs_+4
.set .Lnsaved_,.Lnsaved_+1
.endif
.endr
.endm
/*#define xchal_ncp_load_a2 xchal_ncp_load a2,a3,a4,a5,a6*/
/*#define xchal_ncp_store_a2 xchal_ncp_store a2,a3,a4,a5,a6*/
#define xchal_extratie_load xchal_ncptie_load
#define xchal_extratie_store xchal_ncptie_store
#define xchal_extratie_load_a2 xchal_ncptie_load a2,a3,a4,a5,a6
#define xchal_extratie_store_a2 xchal_ncptie_store a2,a3,a4,a5,a6
#define xchal_extra_load xchal_ncp_load
#define xchal_extra_store xchal_ncp_store
#define xchal_extra_load_a2 xchal_ncp_load a2,a3,a4,a5,a6
#define xchal_extra_store_a2 xchal_ncp_store a2,a3,a4,a5,a6
#define xchal_extra_load_funcbody xchal_ncp_load a2,a3,a4,a5,a6
#define xchal_extra_store_funcbody xchal_ncp_store a2,a3,a4,a5,a6
#define xchal_cp0_store_a2 xchal_cp0_store a2,a3,a4,a5,a6
#define xchal_cp0_load_a2 xchal_cp0_load a2,a3,a4,a5,a6
#define xchal_cp1_store_a2 xchal_cp1_store a2,a3,a4,a5,a6
#define xchal_cp1_load_a2 xchal_cp1_load a2,a3,a4,a5,a6
#define xchal_cp2_store_a2 xchal_cp2_store a2,a3,a4,a5,a6
#define xchal_cp2_load_a2 xchal_cp2_load a2,a3,a4,a5,a6
#define xchal_cp3_store_a2 xchal_cp3_store a2,a3,a4,a5,a6
#define xchal_cp3_load_a2 xchal_cp3_load a2,a3,a4,a5,a6
#define xchal_cp4_store_a2 xchal_cp4_store a2,a3,a4,a5,a6
#define xchal_cp4_load_a2 xchal_cp4_load a2,a3,a4,a5,a6
#define xchal_cp5_store_a2 xchal_cp5_store a2,a3,a4,a5,a6
#define xchal_cp5_load_a2 xchal_cp5_load a2,a3,a4,a5,a6
#define xchal_cp6_store_a2 xchal_cp6_store a2,a3,a4,a5,a6
#define xchal_cp6_load_a2 xchal_cp6_load a2,a3,a4,a5,a6
#define xchal_cp7_store_a2 xchal_cp7_store a2,a3,a4,a5,a6
#define xchal_cp7_load_a2 xchal_cp7_load a2,a3,a4,a5,a6
/* Empty placeholder macros for undefined coprocessors: */
#if (XCHAL_CP_MASK & ~XCHAL_CP_PORT_MASK) == 0
# if XCHAL_CP0_SA_SIZE == 0
.macro xchal_cp0_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp0_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP1_SA_SIZE == 0
.macro xchal_cp1_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp1_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP2_SA_SIZE == 0
.macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP3_SA_SIZE == 0
.macro xchal_cp3_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp3_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP4_SA_SIZE == 0
.macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP5_SA_SIZE == 0
.macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP6_SA_SIZE == 0
.macro xchal_cp6_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp6_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
# if XCHAL_CP7_SA_SIZE == 0
.macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm
.macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm
# endif
#endif
/********************
* Macros to create functions that save and restore the state of *any* TIE
* coprocessor (by dynamic index).
*/
/*
* Macro that expands to the body of a function
* that stores the selected coprocessor's state (registers etc).
* Entry: a2 = ptr to save area in which to save cp state
* a3 = coprocessor number
* Exit: any register a2-a15 (?) may have been clobbered.
*/
.macro xchal_cpi_store_funcbody
#if (XCHAL_CP_MASK & ~XCHAL_CP_PORT_MASK)
# if XCHAL_CP0_SA_SIZE
bnez a3, 99f
xchal_cp0_store_a2
j 90f
99:
# endif
# if XCHAL_CP1_SA_SIZE
bnei a3, 1, 99f
xchal_cp1_store_a2
j 90f
99:
# endif
# if XCHAL_CP2_SA_SIZE
bnei a3, 2, 99f
xchal_cp2_store_a2
j 90f
99:
# endif
# if XCHAL_CP3_SA_SIZE
bnei a3, 3, 99f
xchal_cp3_store_a2
j 90f
99:
# endif
# if XCHAL_CP4_SA_SIZE
bnei a3, 4, 99f
xchal_cp4_store_a2
j 90f
99:
# endif
# if XCHAL_CP5_SA_SIZE
bnei a3, 5, 99f
xchal_cp5_store_a2
j 90f
99:
# endif
# if XCHAL_CP6_SA_SIZE
bnei a3, 6, 99f
xchal_cp6_store_a2
j 90f
99:
# endif
# if XCHAL_CP7_SA_SIZE
bnei a3, 7, 99f
xchal_cp7_store_a2
j 90f
99:
# endif
90:
#endif
.endm
/*
* Macro that expands to the body of a function
* that loads the selected coprocessor's state (registers etc).
* Entry: a2 = ptr to save area from which to restore cp state
* a3 = coprocessor number
* Exit: any register a2-a15 (?) may have been clobbered.
*/
.macro xchal_cpi_load_funcbody
#if (XCHAL_CP_MASK & ~XCHAL_CP_PORT_MASK)
# if XCHAL_CP0_SA_SIZE
bnez a3, 99f
xchal_cp0_load_a2
j 90f
99:
# endif
# if XCHAL_CP1_SA_SIZE
bnei a3, 1, 99f
xchal_cp1_load_a2
j 90f
99:
# endif
# if XCHAL_CP2_SA_SIZE
bnei a3, 2, 99f
xchal_cp2_load_a2
j 90f
99:
# endif
# if XCHAL_CP3_SA_SIZE
bnei a3, 3, 99f
xchal_cp3_load_a2
j 90f
99:
# endif
# if XCHAL_CP4_SA_SIZE
bnei a3, 4, 99f
xchal_cp4_load_a2
j 90f
99:
# endif
# if XCHAL_CP5_SA_SIZE
bnei a3, 5, 99f
xchal_cp5_load_a2
j 90f
99:
# endif
# if XCHAL_CP6_SA_SIZE
bnei a3, 6, 99f
xchal_cp6_load_a2
j 90f
99:
# endif
# if XCHAL_CP7_SA_SIZE
bnei a3, 7, 99f
xchal_cp7_load_a2
j 90f
99:
# endif
90:
#endif
.endm
#endif /*_ASMLANGUAGE or __ASSEMBLER__*/
/* Other default macros for undefined coprocessors: */
#ifndef XCHAL_CP0_NAME
# define XCHAL_CP0_NAME 0
# define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP1_NAME
# define XCHAL_CP1_NAME 0
# define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP2_NAME
# define XCHAL_CP2_NAME 0
# define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP3_NAME
# define XCHAL_CP3_NAME 0
# define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP4_NAME
# define XCHAL_CP4_NAME 0
# define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP5_NAME
# define XCHAL_CP5_NAME 0
# define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP6_NAME
# define XCHAL_CP6_NAME 0
# define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */
#endif
#ifndef XCHAL_CP7_NAME
# define XCHAL_CP7_NAME 0
# define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0
# define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */
#endif
#if XCHAL_CP_MASK == 0
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_CP0_SA_SIZE 0
#define XCHAL_CP0_SA_ALIGN 1
#define XCHAL_CP1_SA_SIZE 0
#define XCHAL_CP1_SA_ALIGN 1
#define XCHAL_CP2_SA_SIZE 0
#define XCHAL_CP2_SA_ALIGN 1
#define XCHAL_CP3_SA_SIZE 0
#define XCHAL_CP3_SA_ALIGN 1
#define XCHAL_CP4_SA_SIZE 0
#define XCHAL_CP4_SA_ALIGN 1
#define XCHAL_CP5_SA_SIZE 0
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP6_SA_SIZE 0
#define XCHAL_CP6_SA_ALIGN 1
#define XCHAL_CP7_SA_SIZE 0
#define XCHAL_CP7_SA_ALIGN 1
#endif
/* Indexing macros: */
#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE
#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */
#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN
#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */
#define XCHAL_CPEXTRA_SA_SIZE_TOR2 XCHAL_CPEXTRA_SA_SIZE /* Tor2Beta only - do not use */
/* Link-time HAL global variables that report coprocessor numbers by name
(names are case-preserved from the original TIE): */
#if !defined(_ASMLANGUAGE) && !defined(_NOCLANGUAGE) && !defined(__ASSEMBLER__)
# define _XCJOIN(a,b) a ## b
# define XCJOIN(a,b) _XCJOIN(a,b)
# ifdef XCHAL_CP0_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP0_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP0_IDENT);
# endif
# ifdef XCHAL_CP1_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP1_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP1_IDENT);
# endif
# ifdef XCHAL_CP2_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP2_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP2_IDENT);
# endif
# ifdef XCHAL_CP3_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP3_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP3_IDENT);
# endif
# ifdef XCHAL_CP4_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP4_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP4_IDENT);
# endif
# ifdef XCHAL_CP5_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP5_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP5_IDENT);
# endif
# ifdef XCHAL_CP6_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP6_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP6_IDENT);
# endif
# ifdef XCHAL_CP7_NAME
extern const unsigned char XCJOIN(Xthal_cp_id_,XCHAL_CP7_IDENT);
extern const unsigned int XCJOIN(Xthal_cp_mask_,XCHAL_CP7_IDENT);
# endif
#endif
/*----------------------------------------------------------------------
DERIVED
----------------------------------------------------------------------*/
#if XCHAL_HAVE_BE
#define XCHAL_INST_ILLN 0xD60F /* 2-byte illegal instruction, msb-first */
#define XCHAL_INST_ILLN_BYTE0 0xD6 /* 2-byte illegal instruction, 1st byte */
#define XCHAL_INST_ILLN_BYTE1 0x0F /* 2-byte illegal instruction, 2nd byte */
#else
#define XCHAL_INST_ILLN 0xF06D /* 2-byte illegal instruction, lsb-first */
#define XCHAL_INST_ILLN_BYTE0 0x6D /* 2-byte illegal instruction, 1st byte */
#define XCHAL_INST_ILLN_BYTE1 0xF0 /* 2-byte illegal instruction, 2nd byte */
#endif
/* Belongs in xtensa/hal.h: */
#define XTHAL_INST_ILL 0x000000 /* 3-byte illegal instruction */
/*
* Because information as to exactly which hardware version is targeted
* by a given software build is not always available, compile-time HAL
* Hardware-Release "_AT" macros are fuzzy (return 0, 1, or XCHAL_MAYBE):
* (Here "RELEASE" is now a misnomer; these are product *versions*, not the releases
* under which they are released. In the T10##.# era there was no distinction.)
*/
#if XCHAL_HW_CONFIGID_RELIABLE
# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) (XTHAL_REL_LE( XCHAL_HW_VERSION_MAJOR,XCHAL_HW_VERSION_MINOR, major,minor ) ? 1 : 0)
# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) (XTHAL_REL_GE( XCHAL_HW_VERSION_MAJOR,XCHAL_HW_VERSION_MINOR, major,minor ) ? 1 : 0)
# define XCHAL_HW_RELEASE_AT(major,minor) (XTHAL_REL_EQ( XCHAL_HW_VERSION_MAJOR,XCHAL_HW_VERSION_MINOR, major,minor ) ? 1 : 0)
# define XCHAL_HW_RELEASE_MAJOR_AT(major) ((XCHAL_HW_VERSION_MAJOR == (major)) ? 1 : 0)
#else
# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) ( ((major) < 1040 && XCHAL_HAVE_XEA2) ? 0 \
: ((major) > 1050 && XCHAL_HAVE_XEA1) ? 1 \
: XTHAL_MAYBE )
# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) ( ((major) >= 2000 && XCHAL_HAVE_XEA1) ? 0 \
: (XTHAL_REL_LE(major,minor, 1040,0) && XCHAL_HAVE_XEA2) ? 1 \
: XTHAL_MAYBE )
# define XCHAL_HW_RELEASE_AT(major,minor) ( (((major) < 1040 && XCHAL_HAVE_XEA2) || \
((major) >= 2000 && XCHAL_HAVE_XEA1)) ? 0 : XTHAL_MAYBE)
# define XCHAL_HW_RELEASE_MAJOR_AT(major) XCHAL_HW_RELEASE_AT(major,0)
#endif
/*
* Specific errata:
*/
/*
* Erratum T1020.H13, T1030.H7, T1040.H10, T1050.H4 (fixed in T1040.3 and T1050.1;
* relevant only in XEA1, kernel-vector mode, level-one interrupts and overflows enabled):
*/
#define XCHAL_MAYHAVE_ERRATUM_XEA1KWIN (XCHAL_HAVE_XEA1 && \
(XCHAL_HW_RELEASE_AT_OR_BELOW(1040,2) != 0 \
|| XCHAL_HW_RELEASE_AT(1050,0)))
/*
* Erratum 453 present in RE-2013.2 up to RF-2014.0, fixed in RF-2014.1.
* Applies to specific set of configuration options.
* Part of the workaround is to add ISYNC at certain points in the code.
* The workaround gated by this macro can be disabled if not needed, e.g. if
* zero-overhead loop buffer will be disabled, by defining _NO_ERRATUM_453.
*/
#if ( XCHAL_HW_MAX_VERSION >= XTENSA_HWVERSION_RE_2013_2 && \
XCHAL_HW_MIN_VERSION <= XTENSA_HWVERSION_RF_2014_0 && \
XCHAL_ICACHE_SIZE != 0 && XCHAL_HAVE_PIF /*covers also AXI/AHB*/ && \
XCHAL_HAVE_LOOPS && XCHAL_LOOP_BUFFER_SIZE != 0 && \
XCHAL_CLOCK_GATING_GLOBAL && !defined(_NO_ERRATUM_453) )
#define XCHAL_ERRATUM_453 1
#else
#define XCHAL_ERRATUM_453 0
#endif
/*
* Erratum 497 present in RE-2012.2 up to RG/RF-2015.2
* Applies to specific set of configuration options.
* Workaround is to add MEMWs after at most 8 cache WB instructions
*/
#if ( ((XCHAL_HW_MAX_VERSION >= XTENSA_HWVERSION_RE_2012_0 && \
XCHAL_HW_MIN_VERSION <= XTENSA_HWVERSION_RF_2015_2) || \
(XCHAL_HW_MAX_VERSION >= XTENSA_HWVERSION_RG_2015_0 && \
XCHAL_HW_MIN_VERSION <= XTENSA_HWVERSION_RG_2015_2) \
) && \
XCHAL_DCACHE_IS_WRITEBACK && \
XCHAL_HAVE_AXI && \
XCHAL_HAVE_PIF_WR_RESP && \
XCHAL_HAVE_PIF_REQ_ATTR && !defined(_NO_ERRATUM_497) \
)
#define XCHAL_ERRATUM_497 1
#else
#define XCHAL_ERRATUM_497 0
#endif
#endif /*XTENSA_CONFIG_CORE_H*/