alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
453ecbe9f2
esp-idf/examples/protocols/mqtt/ws
History
Ivan Grokhotkov e596c84d49 build system: re-add -Wno-format as private flag for some example components
2022-08-03 16:42:47 +04:00
..
main build system: re-add -Wno-format as private flag for some example components 2022-08-03 16:42:47 +04:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
mqtt_ws_example_test.py CI: make sure that reading of the ipv4 address has finished 2022-07-15 14:21:39 +08:00
README.md docs: changes docs supported targets tables 2022-07-14 08:26:32 +08:00
sdkconfig.ci esp_netif: Remove tcpip_adapter compatibility layer 2022-03-10 08:19:43 +01:00

README.md

Supported Targets ESP32 ESP32-C3 ESP32-S2 ESP32-S3

ESP-MQTT MQTT over Websocket

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example connects to the broker mqtt.eclipseprojects.io over web sockets as a demonstration subscribes/unsubscribes and send a message on certain topic. (Please note that the public broker is maintained by the community so may not be always available, for details please see this disclaimer)

It uses ESP-MQTT library which implements mqtt client to connect to mqtt broker.

How to use example

Hardware Required

This example can be executed on any ESP32 board, the only required interface is WiFi and connection to internet.

Configure the project

  • Open the project configuration menu (idf.py menuconfig)
  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (3714) event: sta ip: 192.168.0.139, mask: 255.255.255.0, gw: 192.168.0.2
I (3714) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (3964) MQTT_CLIENT: Sending MQTT CONNECT message, type: 1, id: 0000
I (4164) MQTTWS_EXAMPLE: MQTT_EVENT_CONNECTED
I (4174) MQTTWS_EXAMPLE: sent publish successful, msg_id=41464
I (4174) MQTTWS_EXAMPLE: sent subscribe successful, msg_id=17886
I (4174) MQTTWS_EXAMPLE: sent subscribe successful, msg_id=42970
I (4184) MQTTWS_EXAMPLE: sent unsubscribe successful, msg_id=50241
I (4314) MQTTWS_EXAMPLE: MQTT_EVENT_PUBLISHED, msg_id=41464
I (4484) MQTTWS_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=17886
I (4484) MQTTWS_EXAMPLE: sent publish successful, msg_id=0
I (4684) MQTTWS_EXAMPLE: MQTT_EVENT_SUBSCRIBED, msg_id=42970
I (4684) MQTTWS_EXAMPLE: sent publish successful, msg_id=0
I (4884) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
I (4884) MQTTWS_EXAMPLE: MQTT_EVENT_DATA
TOPIC=/topic/qos0
DATA=data
I (5194) MQTT_CLIENT: deliver_publish, message_length_read=19, message_length=19
I (5194) MQTTWS_EXAMPLE: MQTT_EVENT_DATA
TOPIC=/topic/qos0
DATA=data