mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
291 lines
11 KiB
C
291 lines
11 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
/* This file is from test_uart.c, but mainly about RS485 */
|
|
|
|
#include <string.h>
|
|
#include <sys/param.h>
|
|
#include "unity.h"
|
|
#include "test_utils.h" // unity_send_signal
|
|
#include "driver/uart.h" // for the uart driver access
|
|
#include "esp_log.h"
|
|
#include "esp_random.h" // for uint32_t esp_random()
|
|
|
|
#define UART_NUM1 (UART_NUM_1)
|
|
#define UART_BAUD_RATE (115200 * 10)
|
|
#define BUF_SIZE (512)
|
|
#define UART1_RX_PIN (22)
|
|
#define UART1_TX_PIN (23)
|
|
|
|
// RTS for RS485 Half-Duplex Mode manages DE/~RE
|
|
#define UART1_RTS_PIN (18)
|
|
|
|
// Number of packets to be send during test
|
|
#define PACKETS_NUMBER (40)
|
|
|
|
// Wait timeout for uart driver
|
|
#define PACKET_READ_TICS (1000 / portTICK_PERIOD_MS)
|
|
|
|
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2, ESP32S3, ESP32C3, ESP32C2, ESP32H2)
|
|
//No runners
|
|
|
|
// The table for fast CRC16 calculation
|
|
static const uint8_t crc_hi[] = {
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81,
|
|
0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81,
|
|
0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1,
|
|
0x81, 0x40, 0x01,
|
|
0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01,
|
|
0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
|
|
0x00, 0xC1, 0x81,
|
|
0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80,
|
|
0x41, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x01,
|
|
0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00,
|
|
0xC1, 0x81, 0x40,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81,
|
|
0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
|
|
0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1,
|
|
0x81, 0x40, 0x01,
|
|
0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01,
|
|
0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81,
|
|
0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81,
|
|
0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0,
|
|
0x80, 0x41, 0x01,
|
|
0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01,
|
|
0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
|
|
0x00, 0xC1, 0x81,
|
|
0x40
|
|
};
|
|
|
|
static const uint8_t crc_low[] = {
|
|
0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7,
|
|
0x05, 0xC5, 0xC4,
|
|
0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E, 0x0A, 0xCA, 0xCB,
|
|
0x0B, 0xC9, 0x09,
|
|
0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE,
|
|
0xDF, 0x1F, 0xDD,
|
|
0x1D, 0x1C, 0xDC, 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2,
|
|
0x12, 0x13, 0xD3,
|
|
0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32,
|
|
0x36, 0xF6, 0xF7,
|
|
0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E,
|
|
0xFE, 0xFA, 0x3A,
|
|
0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B,
|
|
0x2A, 0xEA, 0xEE,
|
|
0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27,
|
|
0xE7, 0xE6, 0x26,
|
|
0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1,
|
|
0x63, 0xA3, 0xA2,
|
|
0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4, 0x6C, 0xAC, 0xAD,
|
|
0x6D, 0xAF, 0x6F,
|
|
0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8,
|
|
0xB9, 0x79, 0xBB,
|
|
0x7B, 0x7A, 0xBA, 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4,
|
|
0x74, 0x75, 0xB5,
|
|
0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0,
|
|
0x50, 0x90, 0x91,
|
|
0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94,
|
|
0x54, 0x9C, 0x5C,
|
|
0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59,
|
|
0x58, 0x98, 0x88,
|
|
0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D,
|
|
0x4D, 0x4C, 0x8C,
|
|
0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83,
|
|
0x41, 0x81, 0x80,
|
|
0x40
|
|
};
|
|
|
|
|
|
// Calculate buffer checksum using tables
|
|
// The checksum CRC16 algorithm is specific
|
|
// for Modbus standard and uses polynomial value = 0xA001
|
|
static uint16_t get_buffer_crc16( uint8_t * frame_ptr, uint16_t length )
|
|
{
|
|
TEST_ASSERT( frame_ptr != NULL);
|
|
|
|
uint8_t crc_hi_byte = 0xFF;
|
|
uint8_t crc_low_byte = 0xFF;
|
|
int index;
|
|
|
|
while ( length-- )
|
|
{
|
|
index = crc_low_byte ^ *(frame_ptr++);
|
|
crc_low_byte = crc_hi_byte ^ crc_hi[index];
|
|
crc_hi_byte = crc_low[index];
|
|
}
|
|
return ((crc_hi_byte << 8) | crc_low_byte);
|
|
}
|
|
|
|
// Fill the buffer with random numbers and apply CRC16 at the end
|
|
static uint16_t buffer_fill_random(uint8_t *buffer, size_t length)
|
|
{
|
|
TEST_ASSERT( buffer != NULL);
|
|
// Packet is too short
|
|
if (length < 4) {
|
|
return 0;
|
|
}
|
|
for (int i = 0; i < length; i += 4) {
|
|
uint32_t random = esp_random();
|
|
memcpy(buffer + i, &random, MIN(length - i, 4));
|
|
}
|
|
// Get checksum of the buffer
|
|
uint16_t crc = get_buffer_crc16((uint8_t*)buffer, (length - 2));
|
|
// Apply checksum bytes into packet
|
|
buffer[length - 2] = (uint8_t)(crc & 0xFF); // Set Low byte CRC
|
|
buffer[length - 1] = (uint8_t)(crc >> 8); // Set High byte CRC
|
|
return crc;
|
|
}
|
|
|
|
static void rs485_init(void)
|
|
{
|
|
uart_config_t uart_config = {
|
|
.baud_rate = UART_BAUD_RATE,
|
|
.data_bits = UART_DATA_8_BITS,
|
|
.parity = UART_PARITY_DISABLE,
|
|
.stop_bits = UART_STOP_BITS_1,
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.rx_flow_ctrl_thresh = 120,
|
|
.source_clk = UART_SCLK_DEFAULT,
|
|
};
|
|
printf("RS485 port initialization...\r\n");
|
|
TEST_ESP_OK(uart_wait_tx_idle_polling(UART_NUM1));
|
|
// Configure UART1 parameters
|
|
TEST_ESP_OK(uart_param_config(UART_NUM1, &uart_config));
|
|
// Set UART1 pins
|
|
TEST_ESP_OK(uart_set_pin(UART_NUM1, UART1_TX_PIN, UART1_RX_PIN, UART1_RTS_PIN, UART_PIN_NO_CHANGE));
|
|
// Install UART driver (we don't need an event queue here)
|
|
TEST_ESP_OK(uart_driver_install(UART_NUM1, BUF_SIZE * 2, 0, 0, NULL, 0));
|
|
// Setup rs485 half duplex mode
|
|
TEST_ESP_OK(uart_set_mode(UART_NUM1, UART_MODE_RS485_HALF_DUPLEX));
|
|
}
|
|
|
|
static esp_err_t print_packet_data(const char *str, uint8_t *buffer, uint16_t buffer_size)
|
|
{
|
|
TEST_ASSERT( buffer != NULL);
|
|
TEST_ASSERT( str != NULL);
|
|
|
|
// Calculate the checksum of the buffer
|
|
uint16_t crc16_calc = get_buffer_crc16(buffer, (buffer_size - 2));
|
|
uint16_t crc16_in = ((uint16_t)(buffer[buffer_size - 1]) << 8) | buffer[buffer_size - 2];
|
|
const char* state_str = (crc16_in != crc16_calc) ? "incorrect " : "correct ";
|
|
// Print an array of data
|
|
printf("%s%s RS485 packet = [ ", str, state_str);
|
|
for (int i = 0; i < buffer_size; i++) {
|
|
printf("0x%.2X ", (uint8_t)buffer[i]);
|
|
}
|
|
printf(" ]\r\n");
|
|
printf("crc_in = 0x%.4X\r\n", (uint16_t)crc16_in);
|
|
printf("crc_calc = 0x%.4X\r\n", (uint16_t)crc16_calc);
|
|
esp_err_t result = (crc16_in != crc16_calc) ? ESP_ERR_INVALID_CRC : ESP_OK;
|
|
return result;
|
|
}
|
|
|
|
// Slave test case for multi device
|
|
static void rs485_slave(void)
|
|
{
|
|
rs485_init();
|
|
uint8_t* slave_data = (uint8_t*) malloc(BUF_SIZE);
|
|
uint16_t err_count = 0, good_count = 0;
|
|
printf("Start recieve loop.\r\n");
|
|
unity_send_signal("Slave_ready");
|
|
unity_wait_for_signal("Master_started");
|
|
for(int pack_count = 0; pack_count < PACKETS_NUMBER; pack_count++) {
|
|
//Read slave_data from UART
|
|
int len = uart_read_bytes(UART_NUM1, slave_data, BUF_SIZE, PACKET_READ_TICS);
|
|
//Write slave_data back to UART
|
|
if (len > 2) {
|
|
esp_err_t status = print_packet_data("Received ", slave_data, len);
|
|
|
|
// If received packet is correct then send it back
|
|
if (status == ESP_OK) {
|
|
uart_write_bytes(UART_NUM1, (char*)slave_data, len);
|
|
uart_wait_tx_idle_polling(UART_NUM1);
|
|
good_count++;
|
|
} else {
|
|
printf("Incorrect packet received.\r\n");
|
|
err_count++;
|
|
}
|
|
} else {
|
|
printf("Incorrect data packet[%d], data length: %d, received.\r\n", pack_count, len);
|
|
err_count++;
|
|
}
|
|
}
|
|
printf("Test completed. Received packets = %d, errors = %d\r\n", good_count, err_count);
|
|
// Wait for packet to be sent
|
|
uart_wait_tx_done(UART_NUM1, PACKET_READ_TICS);
|
|
free(slave_data);
|
|
uart_driver_delete(UART_NUM1);
|
|
TEST_ASSERT(err_count < 2);
|
|
}
|
|
|
|
// Master test of multi device test case.
|
|
// It forms packet with random data, apply generated CRC16 and sends to slave.
|
|
// If response recieved correctly from slave means RS485 channel works.
|
|
static void rs485_master(void)
|
|
{
|
|
uint16_t err_count = 0, good_count = 0;
|
|
rs485_init();
|
|
uint8_t* master_buffer = (uint8_t*) malloc(BUF_SIZE);
|
|
uint8_t* slave_buffer = (uint8_t*) malloc(BUF_SIZE);
|
|
// The master test case should be synchronized with slave
|
|
unity_wait_for_signal("Slave_ready");
|
|
unity_send_signal("Master_started");
|
|
printf("Start recieve loop.\r\n");
|
|
for(int i = 0; i < PACKETS_NUMBER; i++) {
|
|
// Form random buffer with CRC16
|
|
buffer_fill_random(master_buffer, BUF_SIZE);
|
|
// Print created packet for debugging
|
|
esp_err_t status = print_packet_data("Send ", master_buffer, BUF_SIZE);
|
|
TEST_ASSERT(status == ESP_OK);
|
|
uart_write_bytes(UART_NUM1, (char*)master_buffer, BUF_SIZE);
|
|
uart_wait_tx_idle_polling(UART_NUM1);
|
|
// Read translated packet from slave
|
|
int len = uart_read_bytes(UART_NUM1, slave_buffer, BUF_SIZE, PACKET_READ_TICS);
|
|
// Check if the received packet is too short
|
|
if (len > 2) {
|
|
// Print received packet and check checksum
|
|
esp_err_t status = print_packet_data("Received ", slave_buffer, len);
|
|
if (status == ESP_OK) {
|
|
good_count++;
|
|
printf("Received: %d\r\n", good_count);
|
|
} else {
|
|
err_count++;
|
|
printf("Errors: %d\r\n", err_count);
|
|
}
|
|
}
|
|
else {
|
|
printf("Incorrect answer from slave, length = %d.\r\n", len);
|
|
err_count++;
|
|
}
|
|
}
|
|
uart_wait_tx_done(UART_NUM1, PACKET_READ_TICS);
|
|
// Free the buffer and delete driver at the end
|
|
free(master_buffer);
|
|
free(slave_buffer);
|
|
uart_driver_delete(UART_NUM1);
|
|
TEST_ASSERT(err_count <= 1);
|
|
printf("Test completed. Received packets = %d, errors = %d\r\n", (uint16_t)good_count, (uint16_t)err_count);
|
|
}
|
|
|
|
/*
|
|
* This multi devices test case verifies RS485 mode of the uart driver and checks
|
|
* correctness of RS485 interface channel communication. It requires
|
|
* RS485 bus driver hardware to be connected to boards.
|
|
*/
|
|
TEST_CASE_MULTIPLE_DEVICES("RS485 half duplex uart multiple devices test.", "[driver_RS485][test_env=UT_T2_RS485]", rs485_master, rs485_slave);
|
|
|
|
#endif //!TEMPORARY_DISABLED_FOR_TARGETS(..)
|