mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
1dc3d5ef22
tools: allow to use LicenseRef-[idstring] in SPDX-License-Identifier Closes IDF-4486 See merge request espressif/esp-idf!22132 |
||
---|---|---|
.. | ||
main | ||
CMakeLists.txt | ||
partitions.csv | ||
README.md | ||
sdkconfig.defaults |
Supported Targets | ESP32-C6 | ESP32-H4 |
---|
Light Switch Example
This test code shows how to configure Zigbee Coordinator and use it as an HA on/off_switch
Hardware Required
- One development board with ESP32-H4 SoC acting as Zigbee Coordinator (loaded with HA_on_off_switch)
- A USB cable for power supply and programming
- Choose another ESP32-H4 as Zigbee end-device (see HA_on_off_light)
Configure the project
Before project configuration and build, make sure to set the correct chip target using idf.py --preview set-target TARGET
command.
Erase the NVRAM
Before flash it to the board, it is recommended to erase NVRAM if user doesn't want to keep the previous examples or other projects stored info using idf.py -p PORT erase-flash
Build and Flash
Build the project, flash it to the board, and start the monitor tool to view the serial output by running idf.py -p PORT flash monitor
.
(To exit the serial monitor, type Ctrl-]
.)
Example Output
As you run the example, you will see the following log:
light switch:
I (318) gpio: GPIO[9]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2
I (328) system_api: Base MAC address is not set
I (328) system_api: read default base MAC address from EFUSE
I (408) phy: libbtbb version: 6c47ec3, Mar 16 2022, 18:54:24
I (408) phy: phy_version: 101, bb2a234, Mar 16 2022, 18:54:11
I (818) ESP_ZB_ON_OFF_SWITCH: status: 255
I (818) ESP_ZB_ON_OFF_SWITCH: Zigbee stack initialized
I (818) ESP_ZB_ON_OFF_SWITCH: Start network formation
I (1318) ESP_ZB_ON_OFF_SWITCH: Formed network successfully (Extended PAN ID: ff:fc:7c:c0:f0:bd:97:10, PAN ID: 0x88e7)
I (1778) ESP_ZB_ON_OFF_SWITCH: status: 0
I (5528) ESP_ZB_ON_OFF_SWITCH: status: 0
I (6038) ESP_ZB_ON_OFF_SWITCH: status: 0
I (6068) ESP_ZB_ON_OFF_SWITCH: New device commissioned or rejoined (short: 0x2878)
I (6098) ESP_ZB_ON_OFF_SWITCH: User find cb: address:0x2878, endpoint:10
I (6638) ESP_ZB_ON_OFF_SWITCH: status: 0
I (6678) ESP_ZB_ON_OFF_SWITCH: status: 0
I (8168) ESP_ZB_ON_OFF_SWITCH: send move to on_off toggle command
I (8898) ESP_ZB_ON_OFF_SWITCH: send move to on_off toggle command
I (9458) ESP_ZB_ON_OFF_SWITCH: send move to on_off toggle command
I (10088) ESP_ZB_ON_OFF_SWITCH: send move to on_off toggle command
I (10588) ESP_ZB_ON_OFF_SWITCH: send move to on_off toggle command
I (11098) ESP_ZB_ON_OFF_SWITCH: send move to on_off toggle command
Light Control Functions
- By toggling the switch button (BOOT) on this board, the LED on the board loaded with the
HA_on_off_light
example will turn on and off.
Troubleshooting
For any technical queries, please open an issue on GitHub. We will get back to you soon.