esp-idf/components/newlib/Kconfig
2022-05-28 08:52:55 +00:00

111 lines
4.5 KiB
Plaintext

menu "Newlib"
choice NEWLIB_STDOUT_LINE_ENDING
prompt "Line ending for UART output"
default NEWLIB_STDOUT_LINE_ENDING_CRLF
help
This option allows configuring the desired line endings sent to UART
when a newline ('\n', LF) appears on stdout.
Three options are possible:
CRLF: whenever LF is encountered, prepend it with CR
LF: no modification is applied, stdout is sent as is
CR: each occurence of LF is replaced with CR
This option doesn't affect behavior of the UART driver (drivers/uart.h).
config NEWLIB_STDOUT_LINE_ENDING_CRLF
bool "CRLF"
config NEWLIB_STDOUT_LINE_ENDING_LF
bool "LF"
config NEWLIB_STDOUT_LINE_ENDING_CR
bool "CR"
endchoice
choice NEWLIB_STDIN_LINE_ENDING
prompt "Line ending for UART input"
default NEWLIB_STDIN_LINE_ENDING_CR
help
This option allows configuring which input sequence on UART produces
a newline ('\n', LF) on stdin.
Three options are possible:
CRLF: CRLF is converted to LF
LF: no modification is applied, input is sent to stdin as is
CR: each occurence of CR is replaced with LF
This option doesn't affect behavior of the UART driver (drivers/uart.h).
config NEWLIB_STDIN_LINE_ENDING_CRLF
bool "CRLF"
config NEWLIB_STDIN_LINE_ENDING_LF
bool "LF"
config NEWLIB_STDIN_LINE_ENDING_CR
bool "CR"
endchoice
config NEWLIB_NANO_FORMAT
bool "Enable 'nano' formatting options for printf/scanf family"
default y if IDF_TARGET_ESP32C2
help
ESP32 ROM contains parts of newlib C library, including printf/scanf family
of functions. These functions have been compiled with so-called "nano"
formatting option. This option doesn't support 64-bit integer formats and C99
features, such as positional arguments.
For more details about "nano" formatting option, please see newlib readme file,
search for '--enable-newlib-nano-formatted-io':
https://sourceware.org/newlib/README
If this option is enabled, build system will use functions available in
ROM, reducing the application binary size. Functions available in ROM run
faster than functions which run from flash. Functions available in ROM can
also run when flash instruction cache is disabled.
If you need 64-bit integer formatting support or C99 features, keep this
option disabled.
choice NEWLIB_TIME_SYSCALL
prompt "Timers used for gettimeofday function"
default NEWLIB_TIME_SYSCALL_USE_RTC_HRT
help
This setting defines which hardware timers are used to
implement 'gettimeofday' and 'time' functions in C library.
- If both high-resolution (systimer for all targets except ESP32)
and RTC timers are used, timekeeping will continue in deep sleep.
Time will be reported at 1 microsecond resolution.
This is the default, and the recommended option.
- If only high-resolution timer (systimer) is used, gettimeofday will
provide time at microsecond resolution.
Time will not be preserved when going into deep sleep mode.
- If only RTC timer is used, timekeeping will continue in
deep sleep, but time will be measured at 6.(6) microsecond
resolution. Also the gettimeofday function itself may take
longer to run.
- If no timers are used, gettimeofday and time functions
return -1 and set errno to ENOSYS.
- When RTC is used for timekeeping, two RTC_STORE registers are
used to keep time in deep sleep mode.
config NEWLIB_TIME_SYSCALL_USE_RTC_HRT
bool "RTC and high-resolution timer"
select ESP_TIME_FUNCS_USE_RTC_TIMER
select ESP_TIME_FUNCS_USE_ESP_TIMER
config NEWLIB_TIME_SYSCALL_USE_RTC
bool "RTC"
select ESP_TIME_FUNCS_USE_RTC_TIMER
config NEWLIB_TIME_SYSCALL_USE_HRT
bool "High-resolution timer"
select ESP_TIME_FUNCS_USE_ESP_TIMER
config NEWLIB_TIME_SYSCALL_USE_NONE
bool "None"
select ESP_TIME_FUNCS_USE_NONE
endchoice
endmenu # Newlib