mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
412 lines
20 KiB
C
412 lines
20 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
// The long term plan is to have a single soc_caps.h for all peripherals.
|
|
// During the refactoring and multichip support development process, we
|
|
// separate these information into periph_caps.h for each peripheral and
|
|
// include them here to avoid developing conflicts.
|
|
|
|
/*
|
|
* These defines are parsed and imported as kconfig variables via the script
|
|
* `tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py`
|
|
*
|
|
* If this file is changed the script will automatically run the script
|
|
* and generate the kconfig variables as part of the pre-commit hooks.
|
|
*
|
|
* It can also be ran manually with `./tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py 'components/soc/esp32s3/include/soc/'`
|
|
*
|
|
* For more information see `tools/gen_soc_caps_kconfig/README.md`
|
|
*
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
/*-------------------------- COMMON CAPS ---------------------------------------*/
|
|
#define SOC_ADC_SUPPORTED 1
|
|
#define SOC_PCNT_SUPPORTED 1
|
|
#define SOC_WIFI_SUPPORTED 1
|
|
#define SOC_TWAI_SUPPORTED 1
|
|
#define SOC_GDMA_SUPPORTED 1
|
|
#define SOC_LCDCAM_SUPPORTED 1
|
|
#define SOC_MCPWM_SUPPORTED 1
|
|
#define SOC_DEDICATED_GPIO_SUPPORTED 1
|
|
#define SOC_CPU_CORES_NUM 2
|
|
#define SOC_CACHE_SUPPORT_WRAP 1
|
|
#define SOC_ULP_SUPPORTED 1
|
|
#define SOC_RISCV_COPROC_SUPPORTED 1
|
|
#define SOC_BT_SUPPORTED 1
|
|
#define SOC_BLUEDROID_SUPPORTED 1
|
|
#define SOC_USB_OTG_SUPPORTED 1
|
|
#define SOC_USB_SERIAL_JTAG_SUPPORTED 1
|
|
#define SOC_CCOMP_TIMER_SUPPORTED 1
|
|
#define SOC_ASYNC_MEMCPY_SUPPORTED 1
|
|
#define SOC_SUPPORTS_SECURE_DL_MODE 1
|
|
#define SOC_EFUSE_KEY_PURPOSE_FIELD 1
|
|
#define SOC_SDMMC_HOST_SUPPORTED 1
|
|
#define SOC_RTC_FAST_MEM_SUPPORTED 1
|
|
#define SOC_RTC_SLOW_MEM_SUPPORTED 1
|
|
#define SOC_PSRAM_DMA_CAPABLE 1
|
|
#define SOC_XT_WDT_SUPPORTED 1
|
|
#define SOC_I2S_SUPPORTED 1
|
|
#define SOC_RMT_SUPPORTED 1
|
|
#define SOC_SIGMADELTA_SUPPORTED 1
|
|
#define SOC_SUPPORT_COEXISTENCE 1
|
|
#define SOC_TEMP_SENSOR_SUPPORTED 1
|
|
#define SOC_AES_SUPPORTED 1
|
|
#define SOC_MPI_SUPPORTED 1
|
|
#define SOC_SHA_SUPPORTED 1
|
|
#define SOC_HMAC_SUPPORTED 1
|
|
#define SOC_DIG_SIGN_SUPPORTED 1
|
|
#define SOC_FLASH_ENC_SUPPORTED 1
|
|
#define SOC_SECURE_BOOT_SUPPORTED 1
|
|
|
|
|
|
/*-------------------------- SOC CAPS ----------------------------------------*/
|
|
#define SOC_APPCPU_HAS_CLOCK_GATING_BUG (1)
|
|
|
|
/*-------------------------- ADC CAPS ----------------------------------------*/
|
|
/*!< SAR ADC Module*/
|
|
#define SOC_ADC_RTC_CTRL_SUPPORTED 1
|
|
#define SOC_ADC_DIG_CTRL_SUPPORTED 1
|
|
#define SOC_ADC_ARBITER_SUPPORTED 1
|
|
#define SOC_ADC_FILTER_SUPPORTED 1
|
|
#define SOC_ADC_MONITOR_SUPPORTED 1
|
|
#define SOC_ADC_PERIPH_NUM (2)
|
|
#define SOC_ADC_CHANNEL_NUM(PERIPH_NUM) (10)
|
|
#define SOC_ADC_MAX_CHANNEL_NUM (10)
|
|
|
|
/*!< Digital */
|
|
#define SOC_ADC_DIGI_CONTROLLER_NUM (2)
|
|
#define SOC_ADC_PATT_LEN_MAX (24) //Two pattern table, each contains 12 items. Each item takes 1 byte
|
|
#define SOC_ADC_DIGI_MAX_BITWIDTH (13)
|
|
/*!< F_sample = F_digi_con / 2 / interval. F_digi_con = 5M for now. 30 <= interva <= 4095 */
|
|
#define SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333
|
|
#define SOC_ADC_SAMPLE_FREQ_THRES_LOW 611
|
|
|
|
/*!< RTC */
|
|
#define SOC_ADC_MAX_BITWIDTH (12)
|
|
|
|
/*!< Calibration */
|
|
#define SOC_ADC_CALIBRATION_V1_SUPPORTED (1) /*!< support HW offset calibration version 1*/
|
|
|
|
|
|
/*-------------------------- APB BACKUP DMA CAPS -------------------------------*/
|
|
#define SOC_APB_BACKUP_DMA (1)
|
|
|
|
/*-------------------------- BROWNOUT CAPS -----------------------------------*/
|
|
#include "brownout_caps.h"
|
|
|
|
/*-------------------------- CPU CAPS ----------------------------------------*/
|
|
#include "cpu_caps.h"
|
|
|
|
/*-------------------------- DIGITAL SIGNATURE CAPS ----------------------------------------*/
|
|
/** The maximum length of a Digital Signature in bits. */
|
|
#define SOC_DS_SIGNATURE_MAX_BIT_LEN (4096)
|
|
|
|
/** Initialization vector (IV) length for the RSA key parameter message digest (MD) in bytes. */
|
|
#define SOC_DS_KEY_PARAM_MD_IV_LENGTH (16)
|
|
|
|
/** Maximum wait time for DS parameter decryption key. If overdue, then key error.
|
|
See TRM DS chapter for more details */
|
|
#define SOC_DS_KEY_CHECK_MAX_WAIT_US (1100)
|
|
|
|
/*-------------------------- GDMA CAPS ---------------------------------------*/
|
|
#define SOC_GDMA_GROUPS (1) // Number of GDMA groups
|
|
#define SOC_GDMA_PAIRS_PER_GROUP (5) // Number of GDMA pairs in each group
|
|
#define SOC_GDMA_SUPPORT_PSRAM (1) // GDMA can access external PSRAM
|
|
#define SOC_GDMA_PSRAM_MIN_ALIGN (16) // Minimal alignment for PSRAM transaction
|
|
|
|
/*-------------------------- GPIO CAPS ---------------------------------------*/
|
|
// ESP32-S3 has 1 GPIO peripheral
|
|
#define SOC_GPIO_PORT (1U)
|
|
#define SOC_GPIO_PIN_COUNT (49)
|
|
|
|
// On ESP32-S3, Digital IOs have their own registers to control pullup/down/capability, independent with RTC registers.
|
|
#define SOC_GPIO_SUPPORT_RTC_INDEPENDENT (1)
|
|
// Force hold is a new function of ESP32-S3
|
|
#define SOC_GPIO_SUPPORT_FORCE_HOLD (1)
|
|
|
|
// 0~48 except from 22~25 are valid
|
|
#define SOC_GPIO_VALID_GPIO_MASK (0x1FFFFFFFFFFFFULL & ~(0ULL | BIT22 | BIT23 | BIT24 | BIT25))
|
|
// No GPIO is input only
|
|
#define SOC_GPIO_VALID_OUTPUT_GPIO_MASK (SOC_GPIO_VALID_GPIO_MASK)
|
|
|
|
// Support to configure slept status
|
|
#define SOC_GPIO_SUPPORT_SLP_SWITCH (1)
|
|
|
|
|
|
/*-------------------------- Dedicated GPIO CAPS -----------------------------*/
|
|
#define SOC_DEDIC_GPIO_OUT_CHANNELS_NUM (8) /*!< 8 outward channels on each CPU core */
|
|
#define SOC_DEDIC_GPIO_IN_CHANNELS_NUM (8) /*!< 8 inward channels on each CPU core */
|
|
#define SOC_DEDIC_GPIO_OUT_AUTO_ENABLE (1) /*!< Dedicated GPIO output attribution is enabled automatically */
|
|
|
|
/*-------------------------- I2C CAPS ----------------------------------------*/
|
|
// ESP32-S3 has 2 I2C
|
|
#define SOC_I2C_NUM (2)
|
|
|
|
#define SOC_I2C_FIFO_LEN (32) /*!< I2C hardware FIFO depth */
|
|
#define SOC_I2C_SUPPORT_SLAVE (1)
|
|
|
|
//ESP32-S3 support hardware FSM reset
|
|
#define SOC_I2C_SUPPORT_HW_FSM_RST (1)
|
|
//ESP32-S3 support hardware clear bus
|
|
#define SOC_I2C_SUPPORT_HW_CLR_BUS (1)
|
|
|
|
#define SOC_I2C_SUPPORT_XTAL (1)
|
|
#define SOC_I2C_SUPPORT_RTC (1)
|
|
|
|
/*-------------------------- I2S CAPS ----------------------------------------*/
|
|
#define SOC_I2S_NUM (2)
|
|
#define SOC_I2S_HW_VERSION_2 (1)
|
|
#define SOC_I2S_SUPPORTS_PCM (1)
|
|
#define SOC_I2S_SUPPORTS_PDM (1)
|
|
#define SOC_I2S_SUPPORTS_PDM_TX (1)
|
|
#define SOC_I2S_SUPPORTS_PDM_RX (1)
|
|
#define SOC_I2S_SUPPORTS_PDM_CODEC (1)
|
|
#define SOC_I2S_SUPPORTS_TDM (1)
|
|
|
|
/*-------------------------- LEDC CAPS ---------------------------------------*/
|
|
#include "ledc_caps.h"
|
|
|
|
/*-------------------------- MCPWM CAPS --------------------------------------*/
|
|
#define SOC_MCPWM_GROUPS (2) ///< 2 MCPWM groups on the chip (i.e., the number of independent MCPWM peripherals)
|
|
#define SOC_MCPWM_TIMERS_PER_GROUP (3) ///< The number of timers that each group has
|
|
#define SOC_MCPWM_OPERATORS_PER_GROUP (3) ///< The number of operators that each group has
|
|
#define SOC_MCPWM_COMPARATORS_PER_OPERATOR (2) ///< The number of comparators that each operator has
|
|
#define SOC_MCPWM_GENERATORS_PER_OPERATOR (2) ///< The number of generators that each operator has
|
|
#define SOC_MCPWM_TRIGGERS_PER_OPERATOR (2) ///< The number of triggers that each operator has
|
|
#define SOC_MCPWM_GPIO_FAULTS_PER_GROUP (3) ///< The number of fault signal detectors that each group has
|
|
#define SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP (1) ///< The number of capture timers that each group has
|
|
#define SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER (3) ///< The number of capture channels that each capture timer has
|
|
#define SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP (3) ///< The number of GPIO synchros that each group has
|
|
#define SOC_MCPWM_SWSYNC_CAN_PROPAGATE (1) ///< Software sync event can be routed to its output
|
|
#define SOC_MCPWM_BASE_CLK_HZ (160000000ULL) ///< Base Clock frequency of 160MHz
|
|
|
|
/*-------------------------- MPU CAPS ----------------------------------------*/
|
|
#include "mpu_caps.h"
|
|
|
|
/*-------------------------- PCNT CAPS ---------------------------------------*/
|
|
#define SOC_PCNT_GROUPS (1)
|
|
#define SOC_PCNT_UNITS_PER_GROUP (4)
|
|
#define SOC_PCNT_CHANNELS_PER_UNIT (2)
|
|
#define SOC_PCNT_THRES_POINT_PER_UNIT (2)
|
|
|
|
/*-------------------------- RMT CAPS ----------------------------------------*/
|
|
#define SOC_RMT_GROUPS 1U /*!< One RMT group */
|
|
#define SOC_RMT_TX_CANDIDATES_PER_GROUP 4 /*!< Number of channels that capable of Transmit in each group */
|
|
#define SOC_RMT_RX_CANDIDATES_PER_GROUP 4 /*!< Number of channels that capable of Receive in each group */
|
|
#define SOC_RMT_CHANNELS_PER_GROUP 8 /*!< Total 8 channels */
|
|
#define SOC_RMT_MEM_WORDS_PER_CHANNEL 48 /*!< Each channel owns 48 words memory (1 word = 4 Bytes) */
|
|
#define SOC_RMT_SUPPORT_RX_PINGPONG 1 /*!< Support Ping-Pong mode on RX path */
|
|
#define SOC_RMT_SUPPORT_RX_DEMODULATION 1 /*!< Support signal demodulation on RX path (i.e. remove carrier) */
|
|
#define SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 /*!< Support stop transmission asynchronously */
|
|
#define SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 /*!< Support transmit specified number of cycles in loop mode */
|
|
#define SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP 1 /*!< Hardware support of auto-stop in loop mode */
|
|
#define SOC_RMT_SUPPORT_TX_SYNCHRO 1 /*!< Support coordinate a group of TX channels to start simultaneously */
|
|
#define SOC_RMT_SUPPORT_TX_CARRIER_ALWAYS_ON 1 /*!< TX carrier can be modulated all the time */
|
|
#define SOC_RMT_SUPPORT_XTAL 1 /*!< Support set XTAL clock as the RMT clock source */
|
|
#define SOC_RMT_SUPPORT_RC_FAST 1 /*!< Support set RC_FAST clock as the RMT clock source */
|
|
#define SOC_RMT_SUPPORT_APB 1 /*!< Support set APB as the RMT clock source */
|
|
#define SOC_RMT_SUPPORT_DMA 1 /*!< RMT peripheral can connect to DMA channel */
|
|
|
|
/*-------------------------- LCD CAPS ----------------------------------------*/
|
|
/* Notes: On esp32-s3, I80 bus and RGB timing generator can't work at the same time */
|
|
#define SOC_LCD_I80_SUPPORTED (1) /*!< Intel 8080 LCD is supported */
|
|
#define SOC_LCD_RGB_SUPPORTED (1) /*!< RGB LCD is supported */
|
|
#define SOC_LCD_I80_BUSES (1U) /*!< Has one LCD Intel 8080 bus */
|
|
#define SOC_LCD_RGB_PANELS (1U) /*!< Support one RGB LCD panel */
|
|
#define SOC_LCD_I80_BUS_WIDTH (16) /*!< Intel 8080 bus width */
|
|
#define SOC_LCD_RGB_DATA_WIDTH (16) /*!< Number of LCD data lines */
|
|
|
|
/*-------------------------- RTC CAPS --------------------------------------*/
|
|
#define SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH (128)
|
|
#define SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM (549)
|
|
#define SOC_RTC_CNTL_CPU_PD_DMA_ADDR_ALIGN (SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH >> 3)
|
|
#define SOC_RTC_CNTL_CPU_PD_DMA_BLOCK_SIZE (SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH >> 3)
|
|
|
|
#define SOC_RTC_CNTL_CPU_PD_RETENTION_MEM_SIZE (SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM * (SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH >> 3))
|
|
|
|
/* I/D Cache tag memory retention hardware parameters */
|
|
#define SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH (128)
|
|
#define SOC_RTC_CNTL_TAGMEM_PD_DMA_ADDR_ALIGN (SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH >> 3)
|
|
|
|
/*-------------------------- RTCIO CAPS --------------------------------------*/
|
|
#define SOC_RTCIO_PIN_COUNT 22
|
|
#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1
|
|
#define SOC_RTCIO_HOLD_SUPPORTED 1
|
|
#define SOC_RTCIO_WAKE_SUPPORTED 1
|
|
|
|
/*-------------------------- SIGMA DELTA CAPS --------------------------------*/
|
|
#define SOC_SIGMADELTA_NUM (1) // 1 sigma-delta peripheral
|
|
#define SOC_SIGMADELTA_CHANNEL_NUM (8) // 8 channels
|
|
|
|
/*-------------------------- SPI CAPS ----------------------------------------*/
|
|
#define SOC_SPI_PERIPH_NUM 3
|
|
#define SOC_SPI_PERIPH_CS_NUM(i) 3
|
|
#define SOC_SPI_MAXIMUM_BUFFER_SIZE 64
|
|
#define SOC_SPI_SUPPORT_DDRCLK 1
|
|
#define SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1
|
|
#define SOC_SPI_SUPPORT_CD_SIG 1
|
|
#define SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1
|
|
#define SOC_SPI_SUPPORT_SLAVE_HD_VER2 1
|
|
|
|
// Peripheral supports DIO, DOUT, QIO, or QOUT
|
|
#define SOC_SPI_PERIPH_SUPPORT_MULTILINE_MODE(host_id) ({(void)host_id; 1;})
|
|
|
|
// Peripheral supports output given level during its "dummy phase"
|
|
#define SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1
|
|
#define SOC_MEMSPI_IS_INDEPENDENT 1
|
|
#define SOC_SPI_MAX_PRE_DIVIDER 16
|
|
#define SOC_SPI_SUPPORT_OCT 1
|
|
|
|
/*-------------------------- SPIRAM CAPS ----------------------------------------*/
|
|
#define SOC_SPIRAM_SUPPORTED 1
|
|
|
|
/*-------------------------- SYS TIMER CAPS ----------------------------------*/
|
|
#define SOC_TOUCH_VERSION_2 (1) // Hardware version of touch sensor
|
|
#define SOC_SYSTIMER_COUNTER_NUM (2) // Number of counter units
|
|
#define SOC_SYSTIMER_ALARM_NUM (3) // Number of alarm units
|
|
#define SOC_SYSTIMER_BIT_WIDTH_LO (32) // Bit width of systimer low part
|
|
#define SOC_SYSTIMER_BIT_WIDTH_HI (20) // Bit width of systimer high part
|
|
#define SOC_SYSTIMER_FIXED_TICKS_US (16) // Number of ticks per microsecond is fixed
|
|
#define SOC_SYSTIMER_INT_LEVEL (1) // Systimer peripheral uses level
|
|
#define SOC_SYSTIMER_ALARM_MISS_COMPENSATE (1) // Systimer peripheral can generate interrupt immediately if t(target) > t(current)
|
|
|
|
/*-------------------------- TIMER GROUP CAPS --------------------------------*/
|
|
#define SOC_TIMER_GROUPS (2)
|
|
#define SOC_TIMER_GROUP_TIMERS_PER_GROUP (2)
|
|
#define SOC_TIMER_GROUP_COUNTER_BIT_WIDTH (54)
|
|
#define SOC_TIMER_GROUP_SUPPORT_XTAL (1)
|
|
#define SOC_TIMER_GROUP_SUPPORT_APB (1)
|
|
#define SOC_TIMER_GROUP_TOTAL_TIMERS (4)
|
|
|
|
/*-------------------------- TOUCH SENSOR CAPS -------------------------------*/
|
|
#define SOC_TOUCH_SENSOR_NUM (15) /*! 15 Touch channels */
|
|
#define SOC_TOUCH_PROXIMITY_CHANNEL_NUM (3) /* Sopport touch proximity channel number. */
|
|
#define SOC_TOUCH_PROXIMITY_MEAS_DONE_SUPPORTED (1) /*Sopport touch proximity channel measure done interrupt type. */
|
|
|
|
#define SOC_TOUCH_PAD_THRESHOLD_MAX (0x1FFFFF) /*!<If set touch threshold max value, The touch sensor can't be in touched status */
|
|
#define SOC_TOUCH_PAD_MEASURE_WAIT_MAX (0xFF) /*!<The timer frequency is 8Mhz, the max value is 0xff */
|
|
|
|
/*-------------------------- TWAI CAPS ---------------------------------------*/
|
|
#include "twai_caps.h"
|
|
|
|
/*-------------------------- UART CAPS ---------------------------------------*/
|
|
// ESP32-S3 has 3 UARTs
|
|
#define SOC_UART_NUM (3)
|
|
#define SOC_UART_FIFO_LEN (128) /*!< The UART hardware FIFO length */
|
|
#define SOC_UART_BITRATE_MAX (5000000) /*!< Max bit rate supported by UART */
|
|
// UART has an extra TX_WAIT_SEND state when the FIFO is not empty and XOFF is enabled
|
|
#define SOC_UART_SUPPORT_FSM_TX_WAIT_SEND (1)
|
|
#define SOC_UART_SUPPORT_WAKEUP_INT (1) /*!< Support UART wakeup interrupt */
|
|
#define SOC_UART_SUPPORT_RTC_CLK (1) /*!< Support RTC clock as the clock source */
|
|
#define SOC_UART_SUPPORT_XTAL_CLK (1) /*!< Support XTAL clock as the clock source */
|
|
#define SOC_UART_REQUIRE_CORE_RESET (1)
|
|
|
|
/*-------------------------- USB CAPS ----------------------------------------*/
|
|
#define SOC_USB_PERIPH_NUM 1
|
|
|
|
|
|
/*--------------------------- SHA CAPS ---------------------------------------*/
|
|
/* Max amount of bytes in a single DMA operation is 4095,
|
|
for SHA this means that the biggest safe amount of bytes is
|
|
31 blocks of 128 bytes = 3968
|
|
*/
|
|
#define SOC_SHA_DMA_MAX_BUFFER_SIZE (3968)
|
|
#define SOC_SHA_SUPPORT_DMA (1)
|
|
|
|
/* The SHA engine is able to resume hashing from a user supplied context */
|
|
#define SOC_SHA_SUPPORT_RESUME (1)
|
|
|
|
/* Has a centralized DMA, which is shared with all peripherals */
|
|
#define SOC_SHA_GDMA (1)
|
|
|
|
/* Supported HW algorithms */
|
|
#define SOC_SHA_SUPPORT_SHA1 (1)
|
|
#define SOC_SHA_SUPPORT_SHA224 (1)
|
|
#define SOC_SHA_SUPPORT_SHA256 (1)
|
|
#define SOC_SHA_SUPPORT_SHA384 (1)
|
|
#define SOC_SHA_SUPPORT_SHA512 (1)
|
|
#define SOC_SHA_SUPPORT_SHA512_224 (1)
|
|
#define SOC_SHA_SUPPORT_SHA512_256 (1)
|
|
#define SOC_SHA_SUPPORT_SHA512_T (1)
|
|
|
|
|
|
/*--------------------------- RSA CAPS ---------------------------------------*/
|
|
#define SOC_RSA_MAX_BIT_LEN (4096)
|
|
|
|
|
|
/*-------------------------- AES CAPS -----------------------------------------*/
|
|
#define SOC_AES_SUPPORT_DMA (1)
|
|
|
|
/* Has a centralized DMA, which is shared with all peripherals */
|
|
#define SOC_AES_GDMA (1)
|
|
|
|
#define SOC_AES_SUPPORT_AES_128 (1)
|
|
#define SOC_AES_SUPPORT_AES_256 (1)
|
|
|
|
|
|
/*-------------------------- Power Management CAPS ---------------------------*/
|
|
#define SOC_PM_SUPPORT_EXT_WAKEUP (1)
|
|
|
|
#define SOC_PM_SUPPORT_WIFI_WAKEUP (1)
|
|
|
|
#define SOC_PM_SUPPORT_BT_WAKEUP (1)
|
|
|
|
#define SOC_PM_SUPPORT_CPU_PD (1)
|
|
|
|
#define SOC_PM_SUPPORT_TAGMEM_PD (1)
|
|
|
|
#define SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP (1) /*!<Supports waking up from touch pad trigger */
|
|
|
|
#define SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY (1)
|
|
|
|
/*-------------------------- Secure Boot CAPS----------------------------*/
|
|
#define SOC_SECURE_BOOT_V2_RSA 1
|
|
#define SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3
|
|
#define SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1
|
|
#define SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1
|
|
|
|
/*-------------------------- Flash Encryption CAPS----------------------------*/
|
|
#define SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX (64)
|
|
#define SOC_FLASH_ENCRYPTION_XTS_AES 1
|
|
#define SOC_FLASH_ENCRYPTION_XTS_AES_128 1
|
|
#define SOC_FLASH_ENCRYPTION_XTS_AES_256 1
|
|
|
|
/*-------------------------- WI-FI HARDWARE TSF CAPS -------------------------------*/
|
|
#define SOC_WIFI_HW_TSF (1)
|
|
|
|
/*--------------- PHY REGISTER AND MEMORY SIZE CAPS --------------------------*/
|
|
#define SOC_PHY_DIG_REGS_MEM_SIZE (21*4)
|
|
#define SOC_MAC_BB_PD_MEM_SIZE (192*4)
|
|
|
|
/*--------------- WIFI LIGHT SLEEP CLOCK WIDTH CAPS --------------------------*/
|
|
#define SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH (12)
|
|
|
|
/*-------------------------- SPI MEM CAPS ---------------------------------------*/
|
|
#define SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE (1)
|
|
#define SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND (1)
|
|
#define SOC_SPI_MEM_SUPPORT_AUTO_RESUME (1)
|
|
#define SOC_SPI_MEM_SUPPORT_SW_SUSPEND (1)
|
|
#define SOC_SPI_MEM_SUPPORT_OPI_MODE (1)
|
|
#define SOC_SPI_MEM_SUPPORT_TIME_TUNING (1)
|
|
|
|
/*-------------------------- COEXISTENCE HARDWARE PTI CAPS -------------------------------*/
|
|
#define SOC_COEX_HW_PTI (1)
|
|
|
|
/*-------------------------- SDMMC CAPS -----------------------------------------*/
|
|
|
|
/* Card detect, write protect, interrupt use GPIO Matrix on all chips.
|
|
* On ESP32-S3, clock/cmd/data pins use GPIO Matrix as well.
|
|
*/
|
|
#define SOC_SDMMC_USE_GPIO_MATRIX 1
|
|
#define SOC_SDMMC_NUM_SLOTS 2
|
|
/* Indicates that there is an option to use XTAL clock instead of PLL for SDMMC */
|
|
#define SOC_SDMMC_SUPPORT_XTAL_CLOCK 1
|
|
|
|
/*-------------------------- Temperature Sensor CAPS -------------------------------------*/
|
|
#define SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC (1)
|