esp-idf/components/esp32s2/system_api_esp32s2.c
Ivan Grokhotkov 74ac618287 soc/rtc: update frequency switching APIs to match the master branch
esp32s2 code was based in IDF v3.1, and used outdated APIs.

Closes IDF-670
2020-02-17 17:23:32 +01:00

116 lines
4.0 KiB
C

// Copyright 2013-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <string.h>
#include "sdkconfig.h"
#include "esp_system.h"
#include "esp_private/system_internal.h"
#include "esp_attr.h"
#include "esp_wifi.h"
#include "esp_log.h"
#include "esp32s2/rom/cache.h"
#include "esp32s2/rom/uart.h"
#include "soc/dport_reg.h"
#include "soc/gpio_reg.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/timer_group_reg.h"
#include "soc/timer_group_struct.h"
#include "soc/cpu.h"
#include "soc/rtc.h"
#include "soc/rtc_wdt.h"
#include "soc/syscon_reg.h"
#include "freertos/xtensa_api.h"
/* "inner" restart function for after RTOS, interrupts & anything else on this
* core are already stopped. Stalls other core, resets hardware,
* triggers restart.
*/
void IRAM_ATTR esp_restart_noos(void)
{
// Disable interrupts
xt_ints_off(0xFFFFFFFF);
// Enable RTC watchdog for 1 second
rtc_wdt_protect_off();
rtc_wdt_disable();
rtc_wdt_set_stage(RTC_WDT_STAGE0, RTC_WDT_STAGE_ACTION_RESET_RTC);
rtc_wdt_set_stage(RTC_WDT_STAGE1, RTC_WDT_STAGE_ACTION_RESET_SYSTEM);
rtc_wdt_set_length_of_reset_signal(RTC_WDT_SYS_RESET_SIG, RTC_WDT_LENGTH_200ns);
rtc_wdt_set_length_of_reset_signal(RTC_WDT_CPU_RESET_SIG, RTC_WDT_LENGTH_200ns);
rtc_wdt_set_time(RTC_WDT_STAGE0, 1000);
rtc_wdt_flashboot_mode_enable();
// Reset and stall the other CPU.
// CPU must be reset before stalling, in case it was running a s32c1i
// instruction. This would cause memory pool to be locked by arbiter
// to the stalled CPU, preventing current CPU from accessing this pool.
const uint32_t core_id = xPortGetCoreID();
// Disable TG0/TG1 watchdogs
TIMERG0.wdt_wprotect = TIMG_WDT_WKEY_VALUE;
TIMERG0.wdt_config0.en = 0;
TIMERG0.wdt_wprotect = 0;
TIMERG1.wdt_wprotect = TIMG_WDT_WKEY_VALUE;
TIMERG1.wdt_config0.en = 0;
TIMERG1.wdt_wprotect = 0;
// Flush any data left in UART FIFOs
uart_tx_wait_idle(0);
uart_tx_wait_idle(1);
// Disable cache
Cache_Disable_ICache();
Cache_Disable_DCache();
// 2nd stage bootloader reconfigures SPI flash signals.
// Reset them to the defaults expected by ROM.
WRITE_PERI_REG(GPIO_FUNC0_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC1_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC2_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC3_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC4_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
// Reset wifi/bluetooth/ethernet/sdio (bb/mac)
DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG,
DPORT_BB_RST | DPORT_FE_RST | DPORT_MAC_RST |
DPORT_BT_RST | DPORT_BTMAC_RST | DPORT_SDIO_RST |
DPORT_SDIO_HOST_RST | DPORT_EMAC_RST | DPORT_MACPWR_RST |
DPORT_RW_BTMAC_RST | DPORT_RW_BTLP_RST);
DPORT_REG_WRITE(DPORT_CORE_RST_EN_REG, 0);
// Reset timer/spi/uart
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,
DPORT_TIMERS_RST | DPORT_SPI01_RST | DPORT_UART_RST);
DPORT_REG_WRITE(DPORT_PERIP_RST_EN_REG, 0);
// Set CPU back to XTAL source, no PLL, same as hard reset
rtc_clk_cpu_freq_set_xtal();
// Reset CPUs
if (core_id == 0) {
esp_cpu_reset(0);
}
while (true) {
;
}
}
void esp_chip_info(esp_chip_info_t *out_info)
{
memset(out_info, 0, sizeof(*out_info));
out_info->model = CHIP_ESP32S2;
out_info->cores = 1;
out_info->features = CHIP_FEATURE_WIFI_BGN;
}