esp-idf/components/esp32/system_api.c
houwenxiang 8fcca01384 driver(uart): fix uart module reset issue (release V3.3)
On ESP32, due to fifo reset issue, UART2 will work incorrectly if reset the fifo of UART1(TX fifo and RX fifo). The software can workaround the RX fifo reset issue,

    while the TX fifo reset issue can not. When UART2 is used and UART1 is used as the log output port, a software reset can reproduce this issue. So we should reset the UART memory

    before the software reset to solve this problem.
2021-04-27 10:12:59 +00:00

392 lines
12 KiB
C

// Copyright 2013-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <string.h>
#include "esp_system.h"
#include "esp_attr.h"
#include "esp_wifi.h"
#include "esp_wifi_internal.h"
#include "esp_log.h"
#include "sdkconfig.h"
#include "rom/efuse.h"
#include "rom/cache.h"
#include "rom/uart.h"
#include "soc/dport_reg.h"
#include "soc/gpio_reg.h"
#include "soc/efuse_reg.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/timer_group_reg.h"
#include "soc/timer_group_struct.h"
#include "soc/cpu.h"
#include "soc/rtc.h"
#include "soc/rtc_wdt.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/xtensa_api.h"
#include "esp_heap_caps.h"
#include "esp_system_internal.h"
#include "esp_efuse.h"
#include "esp_efuse_table.h"
static const char* TAG = "system_api";
static uint8_t base_mac_addr[6] = { 0 };
#define SHUTDOWN_HANDLERS_NO 3
static shutdown_handler_t shutdown_handlers[SHUTDOWN_HANDLERS_NO];
void system_init()
{
}
esp_err_t esp_base_mac_addr_set(uint8_t *mac)
{
if (mac == NULL) {
ESP_LOGE(TAG, "Base MAC address is NULL");
abort();
}
memcpy(base_mac_addr, mac, 6);
return ESP_OK;
}
esp_err_t esp_base_mac_addr_get(uint8_t *mac)
{
uint8_t null_mac[6] = {0};
if (memcmp(base_mac_addr, null_mac, 6) == 0) {
ESP_LOGI(TAG, "Base MAC address is not set, read default base MAC address from BLK0 of EFUSE");
return ESP_ERR_INVALID_MAC;
}
memcpy(mac, base_mac_addr, 6);
return ESP_OK;
}
esp_err_t esp_efuse_mac_get_custom(uint8_t *mac)
{
uint8_t version;
esp_efuse_read_field_blob(ESP_EFUSE_MAC_CUSTOM_VER, &version, 8);
if (version != 1) {
ESP_LOGE(TAG, "Base MAC address from BLK3 of EFUSE version error, version = %d", version);
return ESP_ERR_INVALID_VERSION;
}
uint8_t efuse_crc;
esp_efuse_read_field_blob(ESP_EFUSE_MAC_CUSTOM, mac, 48);
esp_efuse_read_field_blob(ESP_EFUSE_MAC_CUSTOM_CRC, &efuse_crc, 8);
uint8_t calc_crc = esp_crc8(mac, 6);
if (efuse_crc != calc_crc) {
ESP_LOGE(TAG, "Base MAC address from BLK3 of EFUSE CRC error, efuse_crc = 0x%02x; calc_crc = 0x%02x", efuse_crc, calc_crc);
return ESP_ERR_INVALID_CRC;
}
return ESP_OK;
}
esp_err_t esp_efuse_mac_get_default(uint8_t* mac)
{
uint8_t efuse_crc;
esp_efuse_read_field_blob(ESP_EFUSE_MAC_FACTORY, mac, 48);
esp_efuse_read_field_blob(ESP_EFUSE_MAC_FACTORY_CRC, &efuse_crc, 8);
uint8_t calc_crc = esp_crc8(mac, 6);
if (efuse_crc != calc_crc) {
// Small range of MAC addresses are accepted even if CRC is invalid.
// These addresses are reserved for Espressif internal use.
uint32_t mac_high = ((uint32_t)mac[0] << 8) | mac[1];
if ((mac_high & 0xFFFF) == 0x18fe) {
uint32_t mac_low = ((uint32_t)mac[2] << 24) | ((uint32_t)mac[3] << 16) | ((uint32_t)mac[4] << 8) | mac[5];
if ((mac_low >= 0x346a85c7) && (mac_low <= 0x346a85f8)) {
return ESP_OK;
}
} else {
ESP_LOGE(TAG, "Base MAC address from BLK0 of EFUSE CRC error, efuse_crc = 0x%02x; calc_crc = 0x%02x", efuse_crc, calc_crc);
abort();
}
}
return ESP_OK;
}
esp_err_t system_efuse_read_mac(uint8_t *mac) __attribute__((alias("esp_efuse_mac_get_default")));
esp_err_t esp_efuse_read_mac(uint8_t *mac) __attribute__((alias("esp_efuse_mac_get_default")));
esp_err_t esp_derive_local_mac(uint8_t* local_mac, const uint8_t* universal_mac)
{
uint8_t idx;
if (local_mac == NULL || universal_mac == NULL) {
ESP_LOGE(TAG, "mac address param is NULL");
return ESP_ERR_INVALID_ARG;
}
memcpy(local_mac, universal_mac, 6);
for (idx = 0; idx < 64; idx++) {
local_mac[0] = universal_mac[0] | 0x02;
local_mac[0] ^= idx << 2;
if (memcmp(local_mac, universal_mac, 6)) {
break;
}
}
return ESP_OK;
}
esp_err_t esp_read_mac(uint8_t* mac, esp_mac_type_t type)
{
uint8_t efuse_mac[6];
if (mac == NULL) {
ESP_LOGE(TAG, "mac address param is NULL");
return ESP_ERR_INVALID_ARG;
}
if (type < ESP_MAC_WIFI_STA || type > ESP_MAC_ETH) {
ESP_LOGE(TAG, "mac type is incorrect");
return ESP_ERR_INVALID_ARG;
}
_Static_assert(UNIVERSAL_MAC_ADDR_NUM == FOUR_UNIVERSAL_MAC_ADDR \
|| UNIVERSAL_MAC_ADDR_NUM == TWO_UNIVERSAL_MAC_ADDR, \
"incorrect NUM_MAC_ADDRESS_FROM_EFUSE value");
if (esp_base_mac_addr_get(efuse_mac) != ESP_OK) {
esp_efuse_mac_get_default(efuse_mac);
}
switch (type) {
case ESP_MAC_WIFI_STA:
memcpy(mac, efuse_mac, 6);
break;
case ESP_MAC_WIFI_SOFTAP:
if (UNIVERSAL_MAC_ADDR_NUM == FOUR_UNIVERSAL_MAC_ADDR) {
memcpy(mac, efuse_mac, 6);
mac[5] += 1;
}
else if (UNIVERSAL_MAC_ADDR_NUM == TWO_UNIVERSAL_MAC_ADDR) {
esp_derive_local_mac(mac, efuse_mac);
}
break;
case ESP_MAC_BT:
memcpy(mac, efuse_mac, 6);
if (UNIVERSAL_MAC_ADDR_NUM == FOUR_UNIVERSAL_MAC_ADDR) {
mac[5] += 2;
}
else if (UNIVERSAL_MAC_ADDR_NUM == TWO_UNIVERSAL_MAC_ADDR) {
mac[5] += 1;
}
break;
case ESP_MAC_ETH:
if (UNIVERSAL_MAC_ADDR_NUM == FOUR_UNIVERSAL_MAC_ADDR) {
memcpy(mac, efuse_mac, 6);
mac[5] += 3;
}
else if (UNIVERSAL_MAC_ADDR_NUM == TWO_UNIVERSAL_MAC_ADDR) {
efuse_mac[5] += 1;
esp_derive_local_mac(mac, efuse_mac);
}
break;
default:
ESP_LOGW(TAG, "incorrect mac type");
break;
}
return ESP_OK;
}
esp_err_t esp_register_shutdown_handler(shutdown_handler_t handler)
{
int i;
for (i = 0; i < SHUTDOWN_HANDLERS_NO; i++) {
if (shutdown_handlers[i] == NULL) {
shutdown_handlers[i] = handler;
return ESP_OK;
}
}
return ESP_FAIL;
}
void esp_restart_noos() __attribute__ ((noreturn));
void IRAM_ATTR esp_restart(void)
{
int i;
for (i = 0; i < SHUTDOWN_HANDLERS_NO; i++) {
if (shutdown_handlers[i]) {
shutdown_handlers[i]();
}
}
// Disable scheduler on this core.
vTaskSuspendAll();
esp_restart_noos();
}
/* "inner" restart function for after RTOS, interrupts & anything else on this
* core are already stopped. Stalls other core, resets hardware,
* triggers restart.
*/
void IRAM_ATTR esp_restart_noos()
{
// Disable interrupts
xt_ints_off(0xFFFFFFFF);
// Enable RTC watchdog for 1 second
rtc_wdt_protect_off();
rtc_wdt_disable();
rtc_wdt_set_stage(RTC_WDT_STAGE0, RTC_WDT_STAGE_ACTION_RESET_RTC);
rtc_wdt_set_stage(RTC_WDT_STAGE1, RTC_WDT_STAGE_ACTION_RESET_SYSTEM);
rtc_wdt_set_length_of_reset_signal(RTC_WDT_SYS_RESET_SIG, RTC_WDT_LENGTH_200ns);
rtc_wdt_set_length_of_reset_signal(RTC_WDT_CPU_RESET_SIG, RTC_WDT_LENGTH_200ns);
rtc_wdt_set_time(RTC_WDT_STAGE0, 1000);
rtc_wdt_flashboot_mode_enable();
// Reset and stall the other CPU.
// CPU must be reset before stalling, in case it was running a s32c1i
// instruction. This would cause memory pool to be locked by arbiter
// to the stalled CPU, preventing current CPU from accessing this pool.
const uint32_t core_id = xPortGetCoreID();
const uint32_t other_core_id = (core_id == 0) ? 1 : 0;
esp_cpu_reset(other_core_id);
esp_cpu_stall(other_core_id);
// Other core is now stalled, can access DPORT registers directly
esp_dport_access_int_abort();
// Disable TG0/TG1 watchdogs
TIMERG0.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
TIMERG0.wdt_config0.en = 0;
TIMERG0.wdt_wprotect=0;
TIMERG1.wdt_wprotect=TIMG_WDT_WKEY_VALUE;
TIMERG1.wdt_config0.en = 0;
TIMERG1.wdt_wprotect=0;
// Flush any data left in UART FIFOs
uart_tx_wait_idle(0);
uart_tx_wait_idle(1);
uart_tx_wait_idle(2);
// Disable cache
Cache_Read_Disable(0);
Cache_Read_Disable(1);
// 2nd stage bootloader reconfigures SPI flash signals.
// Reset them to the defaults expected by ROM.
WRITE_PERI_REG(GPIO_FUNC0_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC1_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC2_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC3_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC4_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
// Reset wifi/bluetooth/ethernet/sdio (bb/mac)
DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG,
DPORT_BB_RST | DPORT_FE_RST | DPORT_MAC_RST |
DPORT_BT_RST | DPORT_BTMAC_RST | DPORT_SDIO_RST |
DPORT_SDIO_HOST_RST | DPORT_EMAC_RST | DPORT_MACPWR_RST |
DPORT_RW_BTMAC_RST | DPORT_RW_BTLP_RST);
DPORT_REG_WRITE(DPORT_CORE_RST_EN_REG, 0);
// Reset timer/spi/uart
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,
DPORT_TIMERS_RST | DPORT_SPI01_RST | DPORT_SPI2_RST | DPORT_SPI3_RST | DPORT_SPI_DMA_RST | DPORT_UART_RST | DPORT_UART1_RST | DPORT_UART2_RST | DPORT_UART_MEM_RST);
DPORT_REG_WRITE(DPORT_PERIP_RST_EN_REG, 0);
// Set CPU back to XTAL source, no PLL, same as hard reset
rtc_clk_cpu_freq_set_xtal();
// Clear entry point for APP CPU
DPORT_REG_WRITE(DPORT_APPCPU_CTRL_D_REG, 0);
// Reset CPUs
if (core_id == 0) {
// Running on PRO CPU: APP CPU is stalled. Can reset both CPUs.
esp_cpu_reset(1);
esp_cpu_reset(0);
} else {
// Running on APP CPU: need to reset PRO CPU and unstall it,
// then reset APP CPU
esp_cpu_reset(0);
esp_cpu_unstall(0);
esp_cpu_reset(1);
}
while(true) {
;
}
}
void system_restart(void) __attribute__((alias("esp_restart")));
uint32_t esp_get_free_heap_size( void )
{
return heap_caps_get_free_size( MALLOC_CAP_DEFAULT );
}
uint32_t esp_get_free_internal_heap_size( void )
{
return heap_caps_get_free_size( MALLOC_CAP_8BIT | MALLOC_CAP_DMA | MALLOC_CAP_INTERNAL );
}
uint32_t esp_get_minimum_free_heap_size( void )
{
return heap_caps_get_minimum_free_size( MALLOC_CAP_DEFAULT );
}
uint32_t system_get_free_heap_size(void) __attribute__((alias("esp_get_free_heap_size")));
const char* system_get_sdk_version(void)
{
return "master";
}
const char* esp_get_idf_version(void)
{
return IDF_VER;
}
void esp_chip_info(esp_chip_info_t* out_info)
{
uint32_t efuse_rd3 = REG_READ(EFUSE_BLK0_RDATA3_REG);
memset(out_info, 0, sizeof(*out_info));
out_info->model = CHIP_ESP32;
out_info->revision = esp_efuse_get_chip_ver();
if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
out_info->cores = 2;
} else {
out_info->cores = 1;
}
out_info->features = CHIP_FEATURE_WIFI_BGN;
if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
out_info->features |= CHIP_FEATURE_BT | CHIP_FEATURE_BLE;
}
int package = (efuse_rd3 & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
if (package == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5 ||
package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2 ||
package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4) {
out_info->features |= CHIP_FEATURE_EMB_FLASH;
}
}
inline bool soc_has_cache_lock_bug(void)
{
return (esp_efuse_get_chip_ver() == 3);
}